! Started logfile: /scr/pima/bp171a9_uvs/J1123-1444_C_uvs.log on Sat Dec 21 09:12:16 2013
obs /scr/pima/bp171a9_uvs/J1123-1444_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a9_uvs/J1123-1444_C_uva.fits
! AN table 1: 4 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.6875 visibilities/baseline/integration-bin.
! Found source: J1123-1444
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 792 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a9_uvs/J1123-1444_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003705Jy  sigma=2.839654
! Fit after  self-cal, rms=0.966931Jy  sigma=2.566299
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.233 mas, bmaj=10.38 mas, bpa=-8.525 degrees
! Estimated noise=17.5823 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0434359 Jy
! Component: 100  -  total flux cleaned = 0.0518025 Jy
! Total flux subtracted in 100 components = 0.0518025 Jy
! Clean residual min=-0.014686 max=0.014689 Jy/beam
! Clean residual mean=-0.000056 rms=0.005854 Jy/beam
! Combined flux in latest and established models = 0.0518025 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 54 components and 0.0518025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.058612Jy  sigma=0.220706
! Fit after  self-cal, rms=0.057672Jy  sigma=0.216904
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.385 mas, bmaj=10.9 mas, bpa=-7.541 degrees
! Estimated noise=11.2263 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100341 Jy
! Component: 100  -  total flux cleaned = 0.0139276 Jy
! Component: 150  -  total flux cleaned = 0.0130836 Jy
! Component: 200  -  total flux cleaned = 0.011636 Jy
! Total flux subtracted in 200 components = 0.011636 Jy
! Clean residual min=-0.007518 max=0.007551 Jy/beam
! Clean residual mean=-0.000016 rms=0.003341 Jy/beam
! Combined flux in latest and established models = 0.0634385 Jy
! Performing phase self-cal
! Adding 123 model components to the UV plane model.
! The established model now contains 175 components and 0.0634385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038433Jy  sigma=0.098881
! Fit after  self-cal, rms=0.034602Jy  sigma=0.090153
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.385 x 10.9 at -7.541 degrees (North through East)
! Clean map  min=-0.017241  max=0.031656 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.034602Jy  sigma=0.090153
! Fit after  self-cal, rms=0.034602Jy  sigma=0.090153
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.385 mas, bmaj=10.9 mas, bpa=-7.541 degrees
! Estimated noise=11.2263 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00819325 Jy
! Component: 100  -  total flux cleaned = 0.0142444 Jy
! Component: 150  -  total flux cleaned = 0.0169802 Jy
! Component: 200  -  total flux cleaned = 0.0177416 Jy
! Total flux subtracted in 200 components = 0.0177416 Jy
! Clean residual min=-0.004107 max=0.004059 Jy/beam
! Clean residual mean=0.000008 rms=0.001775 Jy/beam
! Combined flux in latest and established models = 0.0811801 Jy
! Performing phase self-cal
! Adding 89 model components to the UV plane model.
! The established model now contains 262 components and 0.0811801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027939Jy  sigma=0.065963
! Fit after  self-cal, rms=0.027425Jy  sigma=0.065145
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027425Jy  sigma=0.065145
! Fit after  self-cal, rms=0.027300Jy  sigma=0.063485
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.393 mas, bmaj=10.93 mas, bpa=-7.51 degrees
! Estimated noise=11.0979 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237439 Jy
! Component: 100  -  total flux cleaned = 0.00218048 Jy
! Component: 150  -  total flux cleaned = 0.00302262 Jy
! Component: 200  -  total flux cleaned = 0.00288901 Jy
! Total flux subtracted in 200 components = 0.00288901 Jy
! Clean residual min=-0.002347 max=0.002352 Jy/beam
! Clean residual mean=0.000008 rms=0.000979 Jy/beam
! Combined flux in latest and established models = 0.0840691 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 316 components and 0.0840691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024795Jy  sigma=0.057799
! Fit after  self-cal, rms=0.024655Jy  sigma=0.057678
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000735302 Jy
! Component: 100  -  total flux cleaned = 0.0012359 Jy
! Component: 150  -  total flux cleaned = 0.000886312 Jy
! Component: 200  -  total flux cleaned = 0.000356319 Jy
! Total flux subtracted in 200 components = 0.000356319 Jy
! Clean residual min=-0.001696 max=0.001690 Jy/beam
! Clean residual mean=0.000010 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.0844254 Jy
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 369 components and 0.0844254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023362Jy  sigma=0.055176
! Fit after  self-cal, rms=0.023300Jy  sigma=0.055122
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023300Jy  sigma=0.055122
! Fit after  self-cal, rms=0.023137Jy  sigma=0.053116
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.388 mas, bmaj=10.93 mas, bpa=-7.553 degrees
! Estimated noise=11.2758 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00178762 Jy
! Component: 100  -  total flux cleaned = 0.0030098 Jy
! Component: 150  -  total flux cleaned = 0.00310415 Jy
! Component: 200  -  total flux cleaned = 0.00302031 Jy
! Total flux subtracted in 200 components = 0.00302031 Jy
! Clean residual min=-0.001423 max=0.001421 Jy/beam
! Clean residual mean=0.000006 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.0874457 Jy
selfcal
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 433 components and 0.0874457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022229Jy  sigma=0.050513
! Fit after  self-cal, rms=0.022175Jy  sigma=0.050474
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000423532 Jy
! Component: 100  -  total flux cleaned = 0.000664327 Jy
! Component: 150  -  total flux cleaned = 0.000591355 Jy
! Component: 200  -  total flux cleaned = 0.000115236 Jy
! Total flux subtracted in 200 components = 0.000115236 Jy
! Clean residual min=-0.001077 max=0.001083 Jy/beam
! Clean residual mean=0.000006 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.087561 Jy
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 477 components and 0.087561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021652Jy  sigma=0.049373
! Fit after  self-cal, rms=0.021620Jy  sigma=0.049354
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021620Jy  sigma=0.049354
! Fit after  self-cal, rms=0.021616Jy  sigma=0.048819
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.071 mas, bmaj=11.07 mas, bpa=-3.889 degrees
! Estimated noise=10.4631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000817801 Jy
! Component: 100  -  total flux cleaned = 0.000897826 Jy
! Component: 150  -  total flux cleaned = 0.00102443 Jy
! Component: 200  -  total flux cleaned = 0.00120103 Jy
! Total flux subtracted in 200 components = 0.00120103 Jy
! Clean residual min=-0.000963 max=0.000969 Jy/beam
! Clean residual mean=0.000009 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.088762 Jy
selfcal
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 550 components and 0.088762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021350Jy  sigma=0.047525
! Fit after  self-cal, rms=0.021325Jy  sigma=0.047510
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000381804 Jy
! Component: 100  -  total flux cleaned = 0.000638453 Jy
! Component: 150  -  total flux cleaned = 0.00116581 Jy
! Component: 200  -  total flux cleaned = 0.00162023 Jy
! Total flux subtracted in 200 components = 0.00162023 Jy
! Clean residual min=-0.000738 max=0.000738 Jy/beam
! Clean residual mean=0.000007 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.0903822 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 627 components and 0.0903822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021179Jy  sigma=0.046886
! Fit after  self-cal, rms=0.021166Jy  sigma=0.046874
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.389 mas, bmaj=10.9 mas, bpa=-7.513 degrees
! Estimated noise=11.3888 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.389 x 10.9 at -7.513 degrees (North through East)
! Clean map  min=-0.009738  max=0.027443 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.24 mas, bmaj=10.45 mas, bpa=-8.544 degrees
! Estimated noise=17.8418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0481625 Jy
! Component: 100  -  total flux cleaned = 0.0695745 Jy
! Component: 150  -  total flux cleaned = 0.0738267 Jy
! Component: 200  -  total flux cleaned = 0.079245 Jy
! Total flux subtracted in 200 components = 0.079245 Jy
! Clean residual min=-0.011560 max=0.011579 Jy/beam
! Clean residual mean=-0.000044 rms=0.004714 Jy/beam
! Combined flux in latest and established models = 0.0792451 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 98 model components to the UV plane model.
! The established model now contains 98 components and 0.0792451 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.389 mas, bmaj=10.9 mas, bpa=-7.513 degrees
! Estimated noise=11.3888 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00782174 Jy
! Component: 100  -  total flux cleaned = 0.00701386 Jy
! Component: 150  -  total flux cleaned = 0.00694684 Jy
! Component: 200  -  total flux cleaned = 0.00841777 Jy
! Total flux subtracted in 200 components = 0.00841777 Jy
! Clean residual min=-0.005811 max=0.005799 Jy/beam
! Clean residual mean=-0.000013 rms=0.002621 Jy/beam
! Combined flux in latest and established models = 0.0876628 Jy
! Adding 113 model components to the UV plane model.
! The established model now contains 207 components and 0.0876629 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.071 mas, bmaj=11.07 mas, bpa=-3.889 degrees
! Estimated noise=10.4631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126344 Jy
! Component: 100  -  total flux cleaned = 0.00343321 Jy
! Component: 150  -  total flux cleaned = 0.00528833 Jy
! Component: 200  -  total flux cleaned = 0.00607741 Jy
! Total flux subtracted in 200 components = 0.00607741 Jy
! Clean residual min=-0.002972 max=0.002986 Jy/beam
! Clean residual mean=0.000008 rms=0.001384 Jy/beam
! Combined flux in latest and established models = 0.0937403 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000842657 Jy
! Component: 100  -  total flux cleaned = 0.00114374 Jy
! Component: 150  -  total flux cleaned = 0.00142006 Jy
! Component: 200  -  total flux cleaned = 0.00178757 Jy
! Total flux subtracted in 200 components = 0.00178757 Jy
! Clean residual min=-0.001929 max=0.001933 Jy/beam
! Clean residual mean=0.000014 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.0955278 Jy
! Adding 180 model components to the UV plane model.
! The established model now contains 382 components and 0.0955278 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.389 mas, bmaj=10.9 mas, bpa=-7.513 degrees
! Estimated noise=11.3888 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000306922 Jy
! Component: 100  -  total flux cleaned = -0.000215078 Jy
! Component: 150  -  total flux cleaned = -0.00022582 Jy
! Component: 200  -  total flux cleaned = -6.25328e-05 Jy
! Total flux subtracted in 200 components = -6.25328e-05 Jy
! Clean residual min=-0.001329 max=0.001332 Jy/beam
! Clean residual mean=0.000009 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.0954653 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 434 components and 0.0954653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021645Jy  sigma=0.048770
! Fit after  self-cal, rms=0.021436Jy  sigma=0.048505
wmodel /scr/pima/bp171a9_uvs/J1123-1444_C_map.mod
! Writing 434 model components to file: /scr/pima/bp171a9_uvs/J1123-1444_C_map.mod
wobs /scr/pima/bp171a9_uvs/J1123-1444_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a9_uvs/J1123-1444_C_uvs.fits
wwins /scr/pima/bp171a9_uvs/J1123-1444_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bp171a9_uvs/J1123-1444_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.389 x 10.9 at -7.513 degrees (North through East)
! Clean map  min=-0.0088996  max=0.024382 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a9_uvs/J1123-1444_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0243815 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000561342 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -6.90698 6.90698 13.814 27.6279 55.2558
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.024 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  43.434 
quit
! Quitting program
! Log file /scr/pima/bp171a9_uvs/J1123-1444_C_uvs.log closed on Sat Dec 21 09:12:19 2013