! Started logfile: /scr/pima/bp171a9_uvs/J1120+2327_C_uvs.log on Sat Dec 21 09:12:02 2013
obs /scr/pima/bp171a9_uvs/J1120+2327_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a9_uvs/J1120+2327_C_uva.fits
! AN table 1: 3 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.571429 visibilities/baseline/integration-bin.
! Found source: J1120+2327
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 288 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a9_uvs/J1120+2327_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001495Jy  sigma=1.834491
! Fit after  self-cal, rms=0.970558Jy  sigma=1.777913
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.022 mas, bmaj=12.53 mas, bpa=-16.54 degrees
! Estimated noise=41.9009 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0287516 Jy
! Component: 100  -  total flux cleaned = 0.0397549 Jy
! Total flux subtracted in 100 components = 0.0397549 Jy
! Clean residual min=-0.006556 max=0.006620 Jy/beam
! Clean residual mean=0.000004 rms=0.003204 Jy/beam
! Combined flux in latest and established models = 0.0397549 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 46 components and 0.0397549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019672Jy  sigma=0.052285
! Fit after  self-cal, rms=0.018869Jy  sigma=0.051888
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.723 mas, bmaj=12.81 mas, bpa=-11.1 degrees
! Estimated noise=27.6172 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00910043 Jy
! Component: 100  -  total flux cleaned = 0.00830816 Jy
! Component: 150  -  total flux cleaned = 0.00823254 Jy
! Component: 200  -  total flux cleaned = 0.00805278 Jy
! Total flux subtracted in 200 components = 0.00805278 Jy
! Clean residual min=-0.002132 max=0.002114 Jy/beam
! Clean residual mean=0.000014 rms=0.001229 Jy/beam
! Combined flux in latest and established models = 0.0478077 Jy
! Performing phase self-cal
! Adding 135 model components to the UV plane model.
! The established model now contains 181 components and 0.0478077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013936Jy  sigma=0.025672
! Fit after  self-cal, rms=0.013604Jy  sigma=0.025170
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.723 x 12.81 at -11.1 degrees (North through East)
! Clean map  min=-0.0049834  max=0.030285 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     HN        1.00*    KP        1.11     LA        0.98     
!   NL        1.11     OV        0.98     PT        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     HN        1.00*    KP        1.08     LA        1.02     
!   NL        0.92     OV        1.15     PT        0.87     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.013604Jy  sigma=0.025170
! Fit after  self-cal, rms=0.013564Jy  sigma=0.024736
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.724 mas, bmaj=12.85 mas, bpa=-11.41 degrees
! Estimated noise=27.6255 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000623207 Jy
! Component: 100  -  total flux cleaned = 0.000353591 Jy
! Component: 150  -  total flux cleaned = -0.000111243 Jy
! Component: 200  -  total flux cleaned = -0.000467106 Jy
! Total flux subtracted in 200 components = -0.000467106 Jy
! Clean residual min=-0.000740 max=0.000717 Jy/beam
! Clean residual mean=0.000015 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.0473406 Jy
! Performing phase self-cal
! Adding 126 model components to the UV plane model.
! The established model now contains 307 components and 0.0473405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013177Jy  sigma=0.022876
! Fit after  self-cal, rms=0.013168Jy  sigma=0.022846
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013168Jy  sigma=0.022846
! Fit after  self-cal, rms=0.013134Jy  sigma=0.022627
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.691 mas, bmaj=12.82 mas, bpa=-11.52 degrees
! Estimated noise=27.8153 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00063504 Jy
! Component: 100  -  total flux cleaned = 0.00055228 Jy
! Component: 150  -  total flux cleaned = 0.000364251 Jy
! Component: 200  -  total flux cleaned = 2.94187e-05 Jy
! Total flux subtracted in 200 components = 2.94187e-05 Jy
! Clean residual min=-0.000513 max=0.000508 Jy/beam
! Clean residual mean=0.000011 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.04737 Jy
selfcal
! Performing phase self-cal
! Adding 117 model components to the UV plane model.
! The established model now contains 411 components and 0.04737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013055Jy  sigma=0.021970
! Fit after  self-cal, rms=0.013052Jy  sigma=0.021963
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.87915e-05 Jy
! Component: 100  -  total flux cleaned = -0.000170236 Jy
! Component: 150  -  total flux cleaned = -0.000382276 Jy
! Component: 200  -  total flux cleaned = -0.00060076 Jy
! Total flux subtracted in 200 components = -0.00060076 Jy
! Clean residual min=-0.000381 max=0.000372 Jy/beam
! Clean residual mean=0.000008 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.0467692 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 481 components and 0.0467692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013035Jy  sigma=0.021762
! Fit after  self-cal, rms=0.013037Jy  sigma=0.021759
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013037Jy  sigma=0.021759
! Fit after  self-cal, rms=0.013026Jy  sigma=0.021680
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.677 mas, bmaj=12.81 mas, bpa=-11.56 degrees
! Estimated noise=27.9601 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000303775 Jy
! Component: 100  -  total flux cleaned = 0.000285681 Jy
! Component: 150  -  total flux cleaned = 0.000214882 Jy
! Component: 200  -  total flux cleaned = 0.00021535 Jy
! Total flux subtracted in 200 components = 0.00021535 Jy
! Clean residual min=-0.000297 max=0.000292 Jy/beam
! Clean residual mean=0.000007 rms=0.000124 Jy/beam
! Combined flux in latest and established models = 0.0469846 Jy
selfcal
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 538 components and 0.0469845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013026Jy  sigma=0.021477
! Fit after  self-cal, rms=0.013027Jy  sigma=0.021475
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.60594e-05 Jy
! Component: 100  -  total flux cleaned = -0.000171377 Jy
! Component: 150  -  total flux cleaned = -0.000231383 Jy
! Component: 200  -  total flux cleaned = -0.000371106 Jy
! Total flux subtracted in 200 components = -0.000371106 Jy
! Clean residual min=-0.000267 max=0.000267 Jy/beam
! Clean residual mean=0.000005 rms=0.000112 Jy/beam
! Combined flux in latest and established models = 0.0466134 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 585 components and 0.0466134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013016Jy  sigma=0.021402
! Fit after  self-cal, rms=0.013017Jy  sigma=0.021400
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013017Jy  sigma=0.021400
! Fit after  self-cal, rms=0.013018Jy  sigma=0.021388
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.279 mas, bmaj=13.05 mas, bpa=-8.334 degrees
! Estimated noise=27.117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.51826e-05 Jy
! Component: 100  -  total flux cleaned = 0.000139066 Jy
! Component: 150  -  total flux cleaned = 0.000100395 Jy
! Component: 200  -  total flux cleaned = -1.67461e-05 Jy
! Total flux subtracted in 200 components = -1.67461e-05 Jy
! Clean residual min=-0.000217 max=0.000220 Jy/beam
! Clean residual mean=0.000005 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.0465967 Jy
selfcal
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 632 components and 0.0465967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013018Jy  sigma=0.021300
! Fit after  self-cal, rms=0.013020Jy  sigma=0.021299
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.29112e-05 Jy
! Component: 100  -  total flux cleaned = 3.95066e-05 Jy
! Component: 150  -  total flux cleaned = -5.43926e-05 Jy
! Component: 200  -  total flux cleaned = -0.000187789 Jy
! Total flux subtracted in 200 components = -0.000187789 Jy
! Clean residual min=-0.000205 max=0.000205 Jy/beam
! Clean residual mean=0.000004 rms=0.000091 Jy/beam
! Combined flux in latest and established models = 0.0464089 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 680 components and 0.0464089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013012Jy  sigma=0.021258
! Fit after  self-cal, rms=0.013013Jy  sigma=0.021258
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=7.674 mas, bmaj=12.81 mas, bpa=-11.56 degrees
! Estimated noise=28.033 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.674 x 12.81 at -11.56 degrees (North through East)
! Clean map  min=-0.0031371  max=0.028631 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.948 mas, bmaj=12.54 mas, bpa=-17.02 degrees
! Estimated noise=42.1342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0289656 Jy
! Component: 100  -  total flux cleaned = 0.0393185 Jy
! Component: 150  -  total flux cleaned = 0.0423421 Jy
! Component: 200  -  total flux cleaned = 0.0426419 Jy
! Total flux subtracted in 200 components = 0.0426419 Jy
! Clean residual min=-0.003685 max=0.003675 Jy/beam
! Clean residual mean=0.000005 rms=0.001884 Jy/beam
! Combined flux in latest and established models = 0.0426419 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 103 model components to the UV plane model.
! The established model now contains 103 components and 0.0426419 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.674 mas, bmaj=12.81 mas, bpa=-11.56 degrees
! Estimated noise=28.033 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0048082 Jy
! Component: 100  -  total flux cleaned = 0.00568594 Jy
! Component: 150  -  total flux cleaned = 0.0061688 Jy
! Component: 200  -  total flux cleaned = 0.00625655 Jy
! Total flux subtracted in 200 components = 0.00625655 Jy
! Clean residual min=-0.001492 max=0.001471 Jy/beam
! Clean residual mean=0.000014 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.0488985 Jy
! Adding 111 model components to the UV plane model.
! The established model now contains 214 components and 0.0488985 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.279 mas, bmaj=13.05 mas, bpa=-8.334 degrees
! Estimated noise=27.117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.66369e-05 Jy
! Component: 100  -  total flux cleaned = -2.91656e-05 Jy
! Component: 150  -  total flux cleaned = -0.000732158 Jy
! Component: 200  -  total flux cleaned = -0.00160115 Jy
! Total flux subtracted in 200 components = -0.00160115 Jy
! Clean residual min=-0.000882 max=0.000867 Jy/beam
! Clean residual mean=0.000019 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.0472973 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00105427 Jy
! Component: 100  -  total flux cleaned = -0.00215539 Jy
! Component: 150  -  total flux cleaned = -0.00317919 Jy
! Component: 200  -  total flux cleaned = -0.0043142 Jy
! Total flux subtracted in 200 components = -0.0043142 Jy
! Clean residual min=-0.001326 max=0.001331 Jy/beam
! Clean residual mean=0.000029 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.0429831 Jy
! Adding 137 model components to the UV plane model.
! The established model now contains 351 components and 0.0429831 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=7.674 mas, bmaj=12.81 mas, bpa=-11.56 degrees
! Estimated noise=28.033 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129336 Jy
! Component: 100  -  total flux cleaned = 0.00301876 Jy
! Component: 150  -  total flux cleaned = 0.00440276 Jy
! Component: 200  -  total flux cleaned = 0.00565466 Jy
! Total flux subtracted in 200 components = 0.00565466 Jy
! Clean residual min=-0.001107 max=0.001140 Jy/beam
! Clean residual mean=-0.000009 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.0486378 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 367 components and 0.0486378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013236Jy  sigma=0.021782
! Fit after  self-cal, rms=0.013248Jy  sigma=0.021769
wmodel /scr/pima/bp171a9_uvs/J1120+2327_C_map.mod
! Writing 367 model components to file: /scr/pima/bp171a9_uvs/J1120+2327_C_map.mod
wobs /scr/pima/bp171a9_uvs/J1120+2327_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a9_uvs/J1120+2327_C_uvs.fits
wwins /scr/pima/bp171a9_uvs/J1120+2327_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bp171a9_uvs/J1120+2327_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.674 x 12.81 at -11.56 degrees (North through East)
! Clean map  min=-0.0028953  max=0.0292 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a9_uvs/J1120+2327_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0291996 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000226075 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.32272 2.32272 4.64543 9.29086 18.5817 37.1634 74.3269
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.029 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  129.159 
quit
! Quitting program
! Log file /scr/pima/bp171a9_uvs/J1120+2327_C_uvs.log closed on Sat Dec 21 09:12:06 2013