! Started logfile: /scr/pima/bp171a7_uvs/J1624+5741_X_uvs.log on Sun May 12 14:06:34 2013
obs /scr/pima/bp171a7_uvs/J1624+5741_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1624+5741_X_uva.fits
! AN table 1: 12 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.824074 visibilities/baseline/integration-bin.
! Found source: J1624+5741
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2848 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1624+5741_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001630Jy  sigma=0.681706
! Fit after  self-cal, rms=0.761957Jy  sigma=0.514741
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7378 mas, bmaj=3.251 mas, bpa=43.97 degrees
! Estimated noise=34.6142 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.17299 Jy
! Component: 100  -  total flux cleaned = 0.213733 Jy
! Total flux subtracted in 100 components = 0.213733 Jy
! Clean residual min=-0.018855 max=0.029532 Jy/beam
! Clean residual mean=0.000134 rms=0.004283 Jy/beam
! Combined flux in latest and established models = 0.213733 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.213733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088588Jy  sigma=0.061638
! Fit after  self-cal, rms=0.088393Jy  sigma=0.061518
! Inverting map 
! Added new window around map position (-3.2, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0257767 Jy
! Component: 100  -  total flux cleaned = 0.0402857 Jy
! Total flux subtracted in 100 components = 0.0402857 Jy
! Clean residual min=-0.014791 max=0.017935 Jy/beam
! Clean residual mean=0.000089 rms=0.003261 Jy/beam
! Combined flux in latest and established models = 0.254018 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.254018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.075458Jy  sigma=0.052419
! Fit after  self-cal, rms=0.075213Jy  sigma=0.052265
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9295 mas, bmaj=3.213 mas, bpa=42.47 degrees
! Estimated noise=19.5396 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0243306 Jy
! Component: 100  -  total flux cleaned = 0.0393536 Jy
! Component: 150  -  total flux cleaned = 0.0502729 Jy
! Component: 200  -  total flux cleaned = 0.0586249 Jy
! Total flux subtracted in 200 components = 0.0586249 Jy
! Clean residual min=-0.011228 max=0.014057 Jy/beam
! Clean residual mean=0.000199 rms=0.002797 Jy/beam
! Combined flux in latest and established models = 0.312643 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 42 components and 0.312643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.065994Jy  sigma=0.045616
! Fit after  self-cal, rms=0.065894Jy  sigma=0.045558
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.10     HN        0.92     KP        0.96     LA        0.99     
!   MK        1.06     NL        1.03     OV        1.18     PT        0.86     
!   SC        0.90     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        0.89     KP        0.95     LA        0.93     
!   MK        1.09     NL        1.07     OV        1.13     PT        0.89     
!   SC        0.91     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     HN        0.96     KP        1.11     LA        0.90     
!   MK        1.10     NL        1.03     OV        1.19     PT        0.88     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     HN        0.97     KP        0.95     LA        0.94     
!   MK        1.18     NL        1.00     OV        1.18     PT        0.91     
!   SC        0.97     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        0.97     KP        1.10     LA        0.92     
!   MK        1.04     NL        0.94     OV        1.14     PT        0.88     
!   SC        0.91     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.03     KP        1.04     LA        0.96     
!   MK        1.06     NL        1.00     OV        1.18     PT        0.90     
!   SC        0.95     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        0.95     KP        1.02     LA        0.91     
!   MK        1.10     NL        0.98     OV        1.21     PT        0.90     
!   SC        0.94     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.98     KP        1.11     LA        0.87     
!   MK        1.07     NL        0.98     OV        1.19     PT        0.84     
!   SC        1.07     
! 
! 
! Fit before self-cal, rms=0.065894Jy  sigma=0.045558
! Fit after  self-cal, rms=0.064758Jy  sigma=0.040613
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9343 mas, bmaj=3.22 mas, bpa=42.21 degrees
! Estimated noise=19.3867 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00497141 Jy
! Component: 100  -  total flux cleaned = 0.00519518 Jy
! Component: 150  -  total flux cleaned = 0.00488704 Jy
! Component: 200  -  total flux cleaned = 0.00434127 Jy
! Total flux subtracted in 200 components = 0.00434127 Jy
! Clean residual min=-0.003420 max=0.003669 Jy/beam
! Clean residual mean=-0.000007 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.316984 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 58 components and 0.316984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064054Jy  sigma=0.040046
! Fit after  self-cal, rms=0.064036Jy  sigma=0.040019
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064036Jy  sigma=0.040019
! Fit after  self-cal, rms=0.064515Jy  sigma=0.039969
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9327 mas, bmaj=3.215 mas, bpa=42.21 degrees
! Estimated noise=19.3022 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115992 Jy
! Component: 100  -  total flux cleaned = 0.00117886 Jy
! Component: 150  -  total flux cleaned = 0.00101971 Jy
! Component: 200  -  total flux cleaned = 0.00083633 Jy
! Total flux subtracted in 200 components = 0.00083633 Jy
! Clean residual min=-0.002701 max=0.002619 Jy/beam
! Clean residual mean=-0.000008 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.317821 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 74 components and 0.317821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064389Jy  sigma=0.039876
! Fit after  self-cal, rms=0.064378Jy  sigma=0.039871
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000168501 Jy
! Component: 100  -  total flux cleaned = -0.000125468 Jy
! Component: 150  -  total flux cleaned = -8.98643e-05 Jy
! Component: 200  -  total flux cleaned = -9.10601e-05 Jy
! Total flux subtracted in 200 components = -9.10601e-05 Jy
! Clean residual min=-0.002299 max=0.002443 Jy/beam
! Clean residual mean=-0.000006 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.31773 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 83 components and 0.31773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064335Jy  sigma=0.039840
! Fit after  self-cal, rms=0.064328Jy  sigma=0.039839
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064328Jy  sigma=0.039839
! Fit after  self-cal, rms=0.064659Jy  sigma=0.039828
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9326 mas, bmaj=3.211 mas, bpa=42.19 degrees
! Estimated noise=19.2706 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000246219 Jy
! Component: 100  -  total flux cleaned = 0.000173666 Jy
! Component: 150  -  total flux cleaned = 0.00014282 Jy
! Component: 200  -  total flux cleaned = 0.00011286 Jy
! Total flux subtracted in 200 components = 0.00011286 Jy
! Clean residual min=-0.002098 max=0.002339 Jy/beam
! Clean residual mean=-0.000009 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.317843 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 91 components and 0.317843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064621Jy  sigma=0.039804
! Fit after  self-cal, rms=0.064617Jy  sigma=0.039802
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100144 Jy
! Component: 100  -  total flux cleaned = -9.97368e-05 Jy
! Component: 150  -  total flux cleaned = -0.000124557 Jy
! Component: 200  -  total flux cleaned = -0.00014695 Jy
! Total flux subtracted in 200 components = -0.00014695 Jy
! Clean residual min=-0.002032 max=0.002351 Jy/beam
! Clean residual mean=-0.000008 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.317696 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 96 components and 0.317696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064597Jy  sigma=0.039789
! Fit after  self-cal, rms=0.064594Jy  sigma=0.039788
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064594Jy  sigma=0.039788
! Fit after  self-cal, rms=0.064834Jy  sigma=0.039785
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.947 mas, bmaj=3.869 mas, bpa=33.37 degrees
! Estimated noise=24.2664 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000300745 Jy
! Component: 100  -  total flux cleaned = -0.000340477 Jy
! Component: 150  -  total flux cleaned = -0.000372542 Jy
! Component: 200  -  total flux cleaned = -0.000370526 Jy
! Total flux subtracted in 200 components = -0.000370526 Jy
! Clean residual min=-0.002851 max=0.002945 Jy/beam
! Clean residual mean=-0.000016 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.317325 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 104 components and 0.317325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064819Jy  sigma=0.039773
! Fit after  self-cal, rms=0.064816Jy  sigma=0.039772
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.44362e-05 Jy
! Component: 100  -  total flux cleaned = 9.34756e-05 Jy
! Component: 150  -  total flux cleaned = 9.47191e-05 Jy
! Component: 200  -  total flux cleaned = 9.5383e-05 Jy
! Total flux subtracted in 200 components = 9.5383e-05 Jy
! Clean residual min=-0.002790 max=0.002917 Jy/beam
! Clean residual mean=-0.000015 rms=0.000851 Jy/beam
! Combined flux in latest and established models = 0.31742 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 110 components and 0.31742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064809Jy  sigma=0.039768
! Fit after  self-cal, rms=0.064806Jy  sigma=0.039768
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9325 mas, bmaj=3.209 mas, bpa=42.18 degrees
! Estimated noise=19.2511 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9325 x 3.209 at 42.18 degrees (North through East)
! Clean map  min=-0.0019077  max=0.23094 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7387 mas, bmaj=3.225 mas, bpa=43.75 degrees
! Estimated noise=34.6946 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.173114 Jy
! Component: 100  -  total flux cleaned = 0.215652 Jy
! Component: 150  -  total flux cleaned = 0.236848 Jy
! Component: 200  -  total flux cleaned = 0.250832 Jy
! Total flux subtracted in 200 components = 0.250832 Jy
! Clean residual min=-0.007942 max=0.007796 Jy/beam
! Clean residual mean=0.000060 rms=0.001861 Jy/beam
! Combined flux in latest and established models = 0.250832 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.250832 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9325 mas, bmaj=3.209 mas, bpa=42.18 degrees
! Estimated noise=19.2511 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205857 Jy
! Component: 100  -  total flux cleaned = 0.0336339 Jy
! Component: 150  -  total flux cleaned = 0.0422126 Jy
! Component: 200  -  total flux cleaned = 0.0481572 Jy
! Total flux subtracted in 200 components = 0.0481572 Jy
! Clean residual min=-0.003037 max=0.004260 Jy/beam
! Clean residual mean=0.000060 rms=0.001035 Jy/beam
! Combined flux in latest and established models = 0.298989 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 65 components and 0.29899 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.947 mas, bmaj=3.869 mas, bpa=33.37 degrees
! Estimated noise=24.2664 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00748032 Jy
! Component: 100  -  total flux cleaned = 0.0115697 Jy
! Component: 150  -  total flux cleaned = 0.0140755 Jy
! Component: 200  -  total flux cleaned = 0.0156727 Jy
! Total flux subtracted in 200 components = 0.0156727 Jy
! Clean residual min=-0.002607 max=0.003381 Jy/beam
! Clean residual mean=0.000006 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.314662 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010494 Jy
! Component: 100  -  total flux cleaned = 0.00135551 Jy
! Component: 150  -  total flux cleaned = 0.00143118 Jy
! Component: 200  -  total flux cleaned = 0.00150065 Jy
! Total flux subtracted in 200 components = 0.00150065 Jy
! Clean residual min=-0.002519 max=0.003184 Jy/beam
! Clean residual mean=-0.000006 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.316163 Jy
! Adding 91 model components to the UV plane model.
! The established model now contains 147 components and 0.316163 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9325 mas, bmaj=3.209 mas, bpa=42.18 degrees
! Estimated noise=19.2511 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000145661 Jy
! Component: 100  -  total flux cleaned = 0.000108731 Jy
! Component: 150  -  total flux cleaned = 7.16159e-06 Jy
! Component: 200  -  total flux cleaned = -8.06085e-05 Jy
! Total flux subtracted in 200 components = -8.06085e-05 Jy
! Clean residual min=-0.002098 max=0.002389 Jy/beam
! Clean residual mean=-0.000003 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.316082 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 166 components and 0.316082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064845Jy  sigma=0.039799
! Fit after  self-cal, rms=0.064832Jy  sigma=0.039795
wmodel /scr/pima/bp171a7_uvs/J1624+5741_X_map.mod
! Writing 166 model components to file: /scr/pima/bp171a7_uvs/J1624+5741_X_map.mod
wobs /scr/pima/bp171a7_uvs/J1624+5741_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1624+5741_X_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1624+5741_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a7_uvs/J1624+5741_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000817684 Jy
! Component: 100  -  total flux cleaned = 0.0011521 Jy
! Component: 150  -  total flux cleaned = 0.00143211 Jy
! Component: 200  -  total flux cleaned = 0.00153105 Jy
! Component: 250  -  total flux cleaned = 0.00159381 Jy
! Component: 300  -  total flux cleaned = 0.00168498 Jy
! Component: 350  -  total flux cleaned = 0.00185901 Jy
! Component: 400  -  total flux cleaned = 0.00197138 Jy
! Component: 450  -  total flux cleaned = 0.00216253 Jy
! Component: 500  -  total flux cleaned = 0.00234877 Jy
! Component: 550  -  total flux cleaned = 0.00253106 Jy
! Component: 600  -  total flux cleaned = 0.00270946 Jy
! Component: 650  -  total flux cleaned = 0.00283422 Jy
! Component: 700  -  total flux cleaned = 0.00290764 Jy
! Component: 750  -  total flux cleaned = 0.002932 Jy
! Component: 800  -  total flux cleaned = 0.00302699 Jy
! Component: 850  -  total flux cleaned = 0.00316698 Jy
! Component: 900  -  total flux cleaned = 0.00328139 Jy
! Component: 950  -  total flux cleaned = 0.00330422 Jy
! Component: 1000  -  total flux cleaned = 0.00334886 Jy
! Component: 1050  -  total flux cleaned = 0.00337083 Jy
! Component: 1100  -  total flux cleaned = 0.00328409 Jy
! Component: 1150  -  total flux cleaned = 0.00324117 Jy
! Component: 1200  -  total flux cleaned = 0.00317752 Jy
! Component: 1250  -  total flux cleaned = 0.00315631 Jy
! Component: 1300  -  total flux cleaned = 0.00311458 Jy
! Component: 1350  -  total flux cleaned = 0.00305268 Jy
! Component: 1400  -  total flux cleaned = 0.00295073 Jy
! Component: 1450  -  total flux cleaned = 0.00295083 Jy
! Component: 1500  -  total flux cleaned = 0.00293064 Jy
! Component: 1550  -  total flux cleaned = 0.00289088 Jy
! Component: 1600  -  total flux cleaned = 0.00285149 Jy
! Component: 1650  -  total flux cleaned = 0.0028125 Jy
! Component: 1700  -  total flux cleaned = 0.00281255 Jy
! Component: 1750  -  total flux cleaned = 0.00275478 Jy
! Component: 1800  -  total flux cleaned = 0.00275465 Jy
! Component: 1850  -  total flux cleaned = 0.00267894 Jy
! Component: 1900  -  total flux cleaned = 0.00262267 Jy
! Component: 1950  -  total flux cleaned = 0.00258541 Jy
! Component: 2000  -  total flux cleaned = 0.00254839 Jy
! Component: 2050  -  total flux cleaned = 0.00253003 Jy
! Component: 2100  -  total flux cleaned = 0.00245681 Jy
! Component: 2150  -  total flux cleaned = 0.00243861 Jy
! Component: 2200  -  total flux cleaned = 0.0024205 Jy
! Component: 2250  -  total flux cleaned = 0.00238468 Jy
! Component: 2300  -  total flux cleaned = 0.00240255 Jy
! Component: 2350  -  total flux cleaned = 0.00238472 Jy
! Component: 2400  -  total flux cleaned = 0.00238471 Jy
! Component: 2450  -  total flux cleaned = 0.0023317 Jy
! Component: 2500  -  total flux cleaned = 0.00229665 Jy
! Component: 2550  -  total flux cleaned = 0.00226175 Jy
! Component: 2600  -  total flux cleaned = 0.00220944 Jy
! Component: 2650  -  total flux cleaned = 0.0021921 Jy
! Component: 2700  -  total flux cleaned = 0.00219215 Jy
! Component: 2750  -  total flux cleaned = 0.00212324 Jy
! Component: 2800  -  total flux cleaned = 0.00212313 Jy
! Component: 2850  -  total flux cleaned = 0.00205479 Jy
! Component: 2900  -  total flux cleaned = 0.00205474 Jy
! Component: 2950  -  total flux cleaned = 0.00200386 Jy
! Component: 3000  -  total flux cleaned = 0.0019362 Jy
! Component: 3050  -  total flux cleaned = 0.00188563 Jy
! Component: 3100  -  total flux cleaned = 0.00181856 Jy
! Component: 3150  -  total flux cleaned = 0.00176837 Jy
! Component: 3200  -  total flux cleaned = 0.00170161 Jy
! Component: 3250  -  total flux cleaned = 0.00163507 Jy
! Component: 3300  -  total flux cleaned = 0.00160195 Jy
! Component: 3350  -  total flux cleaned = 0.00158542 Jy
! Component: 3400  -  total flux cleaned = 0.00151943 Jy
! Component: 3450  -  total flux cleaned = 0.00148645 Jy
! Component: 3500  -  total flux cleaned = 0.00140451 Jy
! Component: 3550  -  total flux cleaned = 0.00135541 Jy
! Component: 3600  -  total flux cleaned = 0.00130652 Jy
! Component: 3650  -  total flux cleaned = 0.00124151 Jy
! Component: 3700  -  total flux cleaned = 0.00117656 Jy
! Component: 3750  -  total flux cleaned = 0.00111184 Jy
! Component: 3800  -  total flux cleaned = 0.00107954 Jy
! Component: 3850  -  total flux cleaned = 0.00103132 Jy
! Component: 3900  -  total flux cleaned = 0.00101534 Jy
! Component: 3950  -  total flux cleaned = 0.000967181 Jy
! Component: 4000  -  total flux cleaned = 0.000951255 Jy
! Component: 4050  -  total flux cleaned = 0.000903394 Jy
! Total flux subtracted in 4096 components = 0.000887514 Jy
! Clean residual min=-0.000879 max=0.001041 Jy/beam
! Clean residual mean=-0.000007 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.31697 Jy
keep
! Adding 225 model components to the UV plane model.
! The established model now contains 391 components and 0.31697 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1624+5741_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9325 x 3.209 at 42.18 degrees (North through East)
! Clean map  min=-0.0029849  max=0.2333 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1624+5741_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.233299 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000255111 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.328049 0.328049 0.656098 1.3122 2.62439 5.24878 10.4976 20.9951 41.9902 83.9805
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.233 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1624+5741_X_uvs.log closed on Sun May 12 14:06:38 2013