! Started logfile: /scr/pima/bp171a7_uvs/J1504+2834_C_uvs.log on Sun May 12 14:55:31 2013
obs /scr/pima/bp171a7_uvs/J1504+2834_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1504+2834_C_uva.fits
! AN table 1: 10 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.858333 visibilities/baseline/integration-bin.
! Found source: J1504+2834
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2472 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1504+2834_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000655Jy  sigma=0.688299
! Fit after  self-cal, rms=0.985562Jy  sigma=0.677690
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.664 mas, bmaj=4.48 mas, bpa=17.46 degrees
! Estimated noise=29.5351 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114702 Jy
! Component: 100  -  total flux cleaned = 0.0143225 Jy
! Total flux subtracted in 100 components = 0.0143225 Jy
! Clean residual min=-0.002189 max=0.001983 Jy/beam
! Clean residual mean=-0.000001 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.0143225 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0143225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026044Jy  sigma=0.017935
! Fit after  self-cal, rms=0.024306Jy  sigma=0.016739
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00340501 Jy
! Component: 100  -  total flux cleaned = 0.00374789 Jy
! Total flux subtracted in 100 components = 0.00374789 Jy
! Clean residual min=-0.001990 max=0.001809 Jy/beam
! Clean residual mean=0.000000 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.0180704 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 19 components and 0.0180704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023883Jy  sigma=0.016441
! Fit after  self-cal, rms=0.023877Jy  sigma=0.016437
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.005 mas, bmaj=5.075 mas, bpa=14.63 degrees
! Estimated noise=20.728 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000731752 Jy
! Component: 100  -  total flux cleaned = 0.00075297 Jy
! Component: 150  -  total flux cleaned = 0.000753874 Jy
! Component: 200  -  total flux cleaned = 0.000770607 Jy
! Total flux subtracted in 200 components = 0.000770607 Jy
! Clean residual min=-0.001487 max=0.001447 Jy/beam
! Clean residual mean=0.000001 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.018841 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 27 components and 0.018841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023843Jy  sigma=0.016413
! Fit after  self-cal, rms=0.023840Jy  sigma=0.016410
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.01     KP        0.84     LA        1.21     
!   MK        1.11     NL        1.07     OV        1.00     PT        1.02     
!   SC        0.91     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     HN        0.84     KP        1.04     LA        1.07     
!   MK        1.05     NL        0.99     OV        0.82     PT        0.95     
!   SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        0.88     KP        1.02     LA        0.92     
!   MK        1.03     NL        1.28     OV        0.96     PT        0.87     
!   SC        0.89     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     HN        0.78     KP        0.84     LA        1.10     
!   MK        1.03     NL        1.22     OV        0.80     PT        1.05     
!   SC        1.13     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        1.29     KP        1.27     LA        1.13     
!   MK        1.02     NL        0.80     OV        1.12     PT        0.77     
!   SC        0.89     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     HN        1.17     KP        0.93     LA        1.19     
!   MK        1.56     NL        1.10     OV        0.98     PT        1.08     
!   SC        1.07     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     HN        0.78     KP        1.05     LA        1.24     
!   MK        1.00     NL        0.85     OV        0.95     PT        1.00     
!   SC        1.13     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.79     HN        0.89     KP        0.93     LA        1.20     
!   MK        0.98     NL        1.05     OV        1.17     PT        1.11     
!   SC        0.94     
! 
! 
! Fit before self-cal, rms=0.023840Jy  sigma=0.016410
! Fit after  self-cal, rms=0.024115Jy  sigma=0.016253
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.999 mas, bmaj=4.998 mas, bpa=14.44 degrees
! Estimated noise=20.4839 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012064 Jy
! Component: 100  -  total flux cleaned = 0.00018998 Jy
! Component: 150  -  total flux cleaned = 0.000191304 Jy
! Component: 200  -  total flux cleaned = 0.000182003 Jy
! Total flux subtracted in 200 components = 0.000182003 Jy
! Clean residual min=-0.001292 max=0.001324 Jy/beam
! Clean residual mean=0.000001 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.019023 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 32 components and 0.019023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024101Jy  sigma=0.016243
! Fit after  self-cal, rms=0.024202Jy  sigma=0.016211
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024202Jy  sigma=0.016211
! Fit after  self-cal, rms=0.024596Jy  sigma=0.016202
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.992 mas, bmaj=4.974 mas, bpa=14.58 degrees
! Estimated noise=20.4495 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000146654 Jy
! Component: 100  -  total flux cleaned = 0.00015787 Jy
! Component: 150  -  total flux cleaned = 0.000166651 Jy
! Component: 200  -  total flux cleaned = 0.00017422 Jy
! Total flux subtracted in 200 components = 0.00017422 Jy
! Clean residual min=-0.001262 max=0.001235 Jy/beam
! Clean residual mean=0.000001 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.0191972 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 37 components and 0.0191972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024584Jy  sigma=0.016196
! Fit after  self-cal, rms=0.024621Jy  sigma=0.016191
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.182e-06 Jy
! Component: 100  -  total flux cleaned = 1.61768e-05 Jy
! Component: 150  -  total flux cleaned = 1.66161e-05 Jy
! Component: 200  -  total flux cleaned = 9.54957e-06 Jy
! Total flux subtracted in 200 components = 9.54957e-06 Jy
! Clean residual min=-0.001252 max=0.001211 Jy/beam
! Clean residual mean=0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.0192068 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 0.0192068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024614Jy  sigma=0.016188
! Fit after  self-cal, rms=0.024617Jy  sigma=0.016187
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024617Jy  sigma=0.016187
! Fit after  self-cal, rms=0.024600Jy  sigma=0.016184
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.984 mas, bmaj=4.957 mas, bpa=14.61 degrees
! Estimated noise=20.3565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168402 Jy
! Component: 100  -  total flux cleaned = 0.000177657 Jy
! Component: 150  -  total flux cleaned = 0.000185153 Jy
! Component: 200  -  total flux cleaned = 0.000191439 Jy
! Total flux subtracted in 200 components = 0.000191439 Jy
! Clean residual min=-0.001215 max=0.001218 Jy/beam
! Clean residual mean=0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.0193982 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 39 components and 0.0193982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024594Jy  sigma=0.016181
! Fit after  self-cal, rms=0.024610Jy  sigma=0.016179
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.29076e-05 Jy
! Component: 100  -  total flux cleaned = -3.3057e-05 Jy
! Component: 150  -  total flux cleaned = -3.92744e-05 Jy
! Component: 200  -  total flux cleaned = -3.37021e-05 Jy
! Total flux subtracted in 200 components = -3.37021e-05 Jy
! Clean residual min=-0.001209 max=0.001181 Jy/beam
! Clean residual mean=0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.0193645 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 40 components and 0.0193645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024605Jy  sigma=0.016177
! Fit after  self-cal, rms=0.024608Jy  sigma=0.016176
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024608Jy  sigma=0.016176
! Fit after  self-cal, rms=0.024550Jy  sigma=0.016175
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.391 mas, bmaj=6.975 mas, bpa=2.389 degrees
! Estimated noise=25.0025 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000244329 Jy
! Component: 100  -  total flux cleaned = 0.000281443 Jy
! Component: 150  -  total flux cleaned = 0.000286908 Jy
! Component: 200  -  total flux cleaned = 0.0002914 Jy
! Total flux subtracted in 200 components = 0.0002914 Jy
! Clean residual min=-0.001071 max=0.001153 Jy/beam
! Clean residual mean=0.000002 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0196559 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 48 components and 0.0196559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024547Jy  sigma=0.016175
! Fit after  self-cal, rms=0.024559Jy  sigma=0.016174
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.47108e-05 Jy
! Component: 100  -  total flux cleaned = -1.8831e-05 Jy
! Component: 150  -  total flux cleaned = -1.85527e-05 Jy
! Component: 200  -  total flux cleaned = -1.42704e-05 Jy
! Total flux subtracted in 200 components = -1.42704e-05 Jy
! Clean residual min=-0.001074 max=0.001141 Jy/beam
! Clean residual mean=0.000002 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0196416 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 54 components and 0.0196416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024558Jy  sigma=0.016174
! Fit after  self-cal, rms=0.024560Jy  sigma=0.016173
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.977 mas, bmaj=4.943 mas, bpa=14.6 degrees
! Estimated noise=20.2724 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.977 x 4.943 at 14.6 degrees (North through East)
! Clean map  min=-0.0012036  max=0.017568 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.648 mas, bmaj=4.391 mas, bpa=17.94 degrees
! Estimated noise=28.4341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130396 Jy
! Component: 100  -  total flux cleaned = 0.0162292 Jy
! Component: 150  -  total flux cleaned = 0.0175553 Jy
! Component: 200  -  total flux cleaned = 0.0183654 Jy
! Total flux subtracted in 200 components = 0.0183654 Jy
! Clean residual min=-0.001658 max=0.001650 Jy/beam
! Clean residual mean=0.000001 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.0183654 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0183654 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.977 mas, bmaj=4.943 mas, bpa=14.6 degrees
! Estimated noise=20.2724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109696 Jy
! Component: 100  -  total flux cleaned = 0.00123654 Jy
! Component: 150  -  total flux cleaned = 0.00125779 Jy
! Component: 200  -  total flux cleaned = 0.00129512 Jy
! Total flux subtracted in 200 components = 0.00129512 Jy
! Clean residual min=-0.001399 max=0.001147 Jy/beam
! Clean residual mean=0.000002 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0196605 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 31 components and 0.0196605 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.391 mas, bmaj=6.975 mas, bpa=2.389 degrees
! Estimated noise=25.0025 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229371 Jy
! Component: 100  -  total flux cleaned = 0.000269284 Jy
! Component: 150  -  total flux cleaned = 0.000279979 Jy
! Component: 200  -  total flux cleaned = 0.000272743 Jy
! Total flux subtracted in 200 components = 0.000272743 Jy
! Clean residual min=-0.001069 max=0.001137 Jy/beam
! Clean residual mean=0.000003 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.0199332 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.2969e-06 Jy
! Component: 100  -  total flux cleaned = -1.65729e-05 Jy
! Component: 150  -  total flux cleaned = -3.27732e-05 Jy
! Component: 200  -  total flux cleaned = -4.77472e-05 Jy
! Total flux subtracted in 200 components = -4.77472e-05 Jy
! Clean residual min=-0.001075 max=0.001134 Jy/beam
! Clean residual mean=0.000002 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0198855 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 42 components and 0.0198855 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.977 mas, bmaj=4.943 mas, bpa=14.6 degrees
! Estimated noise=20.2724 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.02612e-05 Jy
! Component: 100  -  total flux cleaned = -0.000110092 Jy
! Component: 150  -  total flux cleaned = -0.000163009 Jy
! Component: 200  -  total flux cleaned = -0.00017916 Jy
! Total flux subtracted in 200 components = -0.00017916 Jy
! Clean residual min=-0.001258 max=0.001129 Jy/beam
! Clean residual mean=0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.0197063 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 50 components and 0.0197063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024574Jy  sigma=0.016183
! Fit after  self-cal, rms=0.024559Jy  sigma=0.016180
wmodel /scr/pima/bp171a7_uvs/J1504+2834_C_map.mod
! Writing 50 model components to file: /scr/pima/bp171a7_uvs/J1504+2834_C_map.mod
wobs /scr/pima/bp171a7_uvs/J1504+2834_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1504+2834_C_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1504+2834_C_map.win
! wwins: Wrote 1 windows to /scr/pima/bp171a7_uvs/J1504+2834_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00020386 Jy
! Component: 100  -  total flux cleaned = -0.000361403 Jy
! Component: 150  -  total flux cleaned = -0.000491289 Jy
! Component: 200  -  total flux cleaned = -0.000526807 Jy
! Component: 250  -  total flux cleaned = -0.000560327 Jy
! Component: 300  -  total flux cleaned = -0.000528197 Jy
! Component: 350  -  total flux cleaned = -0.000434938 Jy
! Component: 400  -  total flux cleaned = -0.000359374 Jy
! Component: 450  -  total flux cleaned = -0.000300573 Jy
! Component: 500  -  total flux cleaned = -0.000200512 Jy
! Component: 550  -  total flux cleaned = -0.000145008 Jy
! Component: 600  -  total flux cleaned = -0.00013127 Jy
! Component: 650  -  total flux cleaned = -5.1255e-05 Jy
! Component: 700  -  total flux cleaned = -1.19902e-05 Jy
! Component: 750  -  total flux cleaned = 3.89817e-05 Jy
! Component: 800  -  total flux cleaned = 5.11862e-05 Jy
! Component: 850  -  total flux cleaned = 7.58555e-05 Jy
! Component: 900  -  total flux cleaned = 0.000100197 Jy
! Component: 950  -  total flux cleaned = 0.000182507 Jy
! Component: 1000  -  total flux cleaned = 0.000170714 Jy
! Component: 1050  -  total flux cleaned = 0.000204689 Jy
! Component: 1100  -  total flux cleaned = 0.000238049 Jy
! Component: 1150  -  total flux cleaned = 0.000249016 Jy
! Component: 1200  -  total flux cleaned = 0.000238381 Jy
! Component: 1250  -  total flux cleaned = 0.000249045 Jy
! Component: 1300  -  total flux cleaned = 0.000259275 Jy
! Component: 1350  -  total flux cleaned = 0.000208693 Jy
! Component: 1400  -  total flux cleaned = 0.000238942 Jy
! Component: 1450  -  total flux cleaned = 0.000199511 Jy
! Component: 1500  -  total flux cleaned = 0.000189796 Jy
! Component: 1550  -  total flux cleaned = 0.000180253 Jy
! Component: 1600  -  total flux cleaned = 0.000152244 Jy
! Component: 1650  -  total flux cleaned = 0.000143153 Jy
! Component: 1700  -  total flux cleaned = 0.000152297 Jy
! Component: 1750  -  total flux cleaned = 0.000134397 Jy
! Component: 1800  -  total flux cleaned = 9.89523e-05 Jy
! Component: 1850  -  total flux cleaned = 8.14581e-05 Jy
! Component: 1900  -  total flux cleaned = 3.00301e-05 Jy
! Component: 1950  -  total flux cleaned = 4.81489e-06 Jy
! Component: 2000  -  total flux cleaned = -3.67364e-05 Jy
! Component: 2050  -  total flux cleaned = -3.66724e-05 Jy
! Component: 2100  -  total flux cleaned = -5.29983e-05 Jy
! Component: 2150  -  total flux cleaned = -4.51797e-05 Jy
! Component: 2200  -  total flux cleaned = -6.90261e-05 Jy
! Component: 2250  -  total flux cleaned = -7.68374e-05 Jy
! Component: 2300  -  total flux cleaned = -6.91549e-05 Jy
! Component: 2350  -  total flux cleaned = -6.91597e-05 Jy
! Component: 2400  -  total flux cleaned = -6.91427e-05 Jy
! Component: 2450  -  total flux cleaned = -6.92669e-05 Jy
! Component: 2500  -  total flux cleaned = -8.39879e-05 Jy
! Component: 2550  -  total flux cleaned = -6.95733e-05 Jy
! Component: 2600  -  total flux cleaned = -9.8378e-05 Jy
! Component: 2650  -  total flux cleaned = -9.13185e-05 Jy
! Component: 2700  -  total flux cleaned = -9.8354e-05 Jy
! Component: 2750  -  total flux cleaned = -8.43712e-05 Jy
! Component: 2800  -  total flux cleaned = -8.44206e-05 Jy
! Component: 2850  -  total flux cleaned = -8.44231e-05 Jy
! Component: 2900  -  total flux cleaned = -8.43578e-05 Jy
! Component: 2950  -  total flux cleaned = -8.43058e-05 Jy
! Component: 3000  -  total flux cleaned = -5.11728e-05 Jy
! Component: 3050  -  total flux cleaned = -5.77255e-05 Jy
! Component: 3100  -  total flux cleaned = -5.1206e-05 Jy
! Component: 3150  -  total flux cleaned = -4.4721e-05 Jy
! Component: 3200  -  total flux cleaned = -5.73946e-05 Jy
! Component: 3250  -  total flux cleaned = -5.10027e-05 Jy
! Component: 3300  -  total flux cleaned = -1.3374e-05 Jy
! Component: 3350  -  total flux cleaned = -1.96444e-05 Jy
! Component: 3400  -  total flux cleaned = -1.35952e-05 Jy
! Component: 3450  -  total flux cleaned = -1.96423e-05 Jy
! Component: 3500  -  total flux cleaned = 1.06991e-05 Jy
! Component: 3550  -  total flux cleaned = 1.67057e-05 Jy
! Component: 3600  -  total flux cleaned = 5.25356e-05 Jy
! Component: 3650  -  total flux cleaned = 5.83987e-05 Jy
! Component: 3700  -  total flux cleaned = 5.84581e-05 Jy
! Component: 3750  -  total flux cleaned = 7.01326e-05 Jy
! Component: 3800  -  total flux cleaned = 9.32701e-05 Jy
! Component: 3850  -  total flux cleaned = 8.18072e-05 Jy
! Component: 3900  -  total flux cleaned = 0.000116076 Jy
! Component: 3950  -  total flux cleaned = 0.000116103 Jy
! Component: 4000  -  total flux cleaned = 0.000133007 Jy
! Component: 4050  -  total flux cleaned = 0.000133015 Jy
! Total flux subtracted in 4096 components = 0.000144144 Jy
! Clean residual min=-0.000364 max=0.000300 Jy/beam
! Clean residual mean=-0.000000 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.0198505 Jy
keep
! Adding 251 model components to the UV plane model.
! The established model now contains 301 components and 0.0198505 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1504+2834_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.977 x 4.943 at 14.6 degrees (North through East)
! Clean map  min=-0.00091626  max=0.01715 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1504+2834_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0171503 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.55907e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.67211 1.67211 3.34423 6.68845 13.3769 26.7538 53.5076
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.017 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1504+2834_C_uvs.log closed on Sun May 12 14:55:35 2013