! Started logfile: /scr/pima/bp171a7_uvs/J1453+1036_X_uvs.log on Sun May 12 14:05:49 2013
obs /scr/pima/bp171a7_uvs/J1453+1036_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1453+1036_X_uva.fits
! AN table 1: 12 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.9375 visibilities/baseline/integration-bin.
! Found source: J1453+1036
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3240 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1453+1036_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000495Jy  sigma=0.682786
! Fit after  self-cal, rms=0.910430Jy  sigma=0.619301
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8556 mas, bmaj=2.209 mas, bpa=1.378 degrees
! Estimated noise=28.294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0663023 Jy
! Component: 100  -  total flux cleaned = 0.092499 Jy
! Total flux subtracted in 100 components = 0.092499 Jy
! Clean residual min=-0.007114 max=0.011605 Jy/beam
! Clean residual mean=-0.000005 rms=0.002042 Jy/beam
! Combined flux in latest and established models = 0.092499 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.092499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038249Jy  sigma=0.026269
! Fit after  self-cal, rms=0.038145Jy  sigma=0.026202
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137807 Jy
! Component: 100  -  total flux cleaned = 0.0219459 Jy
! Total flux subtracted in 100 components = 0.0219459 Jy
! Clean residual min=-0.004229 max=0.006455 Jy/beam
! Clean residual mean=-0.000003 rms=0.001219 Jy/beam
! Combined flux in latest and established models = 0.114445 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.114445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031658Jy  sigma=0.021533
! Fit after  self-cal, rms=0.031622Jy  sigma=0.021507
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.041 mas, bmaj=2.541 mas, bpa=1.845 degrees
! Estimated noise=18.237 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00626595 Jy
! Component: 100  -  total flux cleaned = 0.00955083 Jy
! Component: 150  -  total flux cleaned = 0.011483 Jy
! Component: 200  -  total flux cleaned = 0.0126656 Jy
! Total flux subtracted in 200 components = 0.0126656 Jy
! Clean residual min=-0.004367 max=0.003552 Jy/beam
! Clean residual mean=-0.000009 rms=0.000928 Jy/beam
! Combined flux in latest and established models = 0.127111 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 0.127111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030468Jy  sigma=0.020643
! Fit after  self-cal, rms=0.030465Jy  sigma=0.020641
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.15     HN        0.91     KP        0.93     LA        1.02     
!   MK        1.22     NL        0.99     OV        1.08     PT        0.85     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        0.88     KP        0.93     LA        0.96     
!   MK        1.16     NL        0.99     OV        1.01     PT        0.90     
!   SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.13     HN        0.96     KP        1.10     LA        0.95     
!   MK        1.25     NL        0.95     OV        1.05     PT        0.93     
!   SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.13     HN        0.93     KP        0.98     LA        0.95     
!   MK        1.17     NL        0.94     OV        1.05     PT        0.92     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.94     KP        1.15     LA        0.97     
!   MK        1.17     NL        0.91     OV        1.04     PT        0.88     
!   SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     HN        1.05     KP        1.03     LA        0.99     
!   MK        1.11     NL        1.01     OV        1.09     PT        0.93     
!   SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.02     KP        1.03     LA        0.96     
!   MK        1.28     NL        1.00     OV        1.07     PT        0.92     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.95     KP        1.15     LA        0.91     
!   MK        1.26     NL        0.97     OV        1.12     PT        0.86     
!   SC        1.20     
! 
! 
! Fit before self-cal, rms=0.030465Jy  sigma=0.020641
! Fit after  self-cal, rms=0.029707Jy  sigma=0.019240
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=2.555 mas, bpa=2.564 degrees
! Estimated noise=18.5167 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000195524 Jy
! Component: 100  -  total flux cleaned = -0.000194691 Jy
! Component: 150  -  total flux cleaned = -0.000203235 Jy
! Component: 200  -  total flux cleaned = -0.000228215 Jy
! Total flux subtracted in 200 components = -0.000228215 Jy
! Clean residual min=-0.001606 max=0.001376 Jy/beam
! Clean residual mean=0.000004 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.126882 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 30 components and 0.126882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029700Jy  sigma=0.019234
! Fit after  self-cal, rms=0.029727Jy  sigma=0.019229
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029727Jy  sigma=0.019229
! Fit after  self-cal, rms=0.029821Jy  sigma=0.019228
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=2.556 mas, bpa=2.623 degrees
! Estimated noise=18.5504 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.03504e-05 Jy
! Component: 100  -  total flux cleaned = -0.000105437 Jy
! Component: 150  -  total flux cleaned = -0.000113623 Jy
! Component: 200  -  total flux cleaned = -0.000121182 Jy
! Total flux subtracted in 200 components = -0.000121182 Jy
! Clean residual min=-0.001567 max=0.001357 Jy/beam
! Clean residual mean=0.000004 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.126761 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 34 components and 0.126761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029816Jy  sigma=0.019225
! Fit after  self-cal, rms=0.029817Jy  sigma=0.019225
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.87517e-05 Jy
! Component: 100  -  total flux cleaned = -2.59067e-05 Jy
! Component: 150  -  total flux cleaned = -2.56023e-05 Jy
! Component: 200  -  total flux cleaned = -3.22392e-05 Jy
! Total flux subtracted in 200 components = -3.22392e-05 Jy
! Clean residual min=-0.001544 max=0.001360 Jy/beam
! Clean residual mean=0.000004 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.126729 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 37 components and 0.126729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029814Jy  sigma=0.019223
! Fit after  self-cal, rms=0.029814Jy  sigma=0.019223
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029814Jy  sigma=0.019223
! Fit after  self-cal, rms=0.029870Jy  sigma=0.019223
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=2.557 mas, bpa=2.654 degrees
! Estimated noise=18.5705 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.28137e-05 Jy
! Component: 100  -  total flux cleaned = -7.00153e-05 Jy
! Component: 150  -  total flux cleaned = -7.64012e-05 Jy
! Component: 200  -  total flux cleaned = -8.25824e-05 Jy
! Total flux subtracted in 200 components = -8.25824e-05 Jy
! Clean residual min=-0.001517 max=0.001342 Jy/beam
! Clean residual mean=0.000004 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.126646 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 40 components and 0.126646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029867Jy  sigma=0.019221
! Fit after  self-cal, rms=0.029867Jy  sigma=0.019221
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.57627e-05 Jy
! Component: 100  -  total flux cleaned = -1.55592e-05 Jy
! Component: 150  -  total flux cleaned = -2.14225e-05 Jy
! Component: 200  -  total flux cleaned = -2.7162e-05 Jy
! Total flux subtracted in 200 components = -2.7162e-05 Jy
! Clean residual min=-0.001504 max=0.001345 Jy/beam
! Clean residual mean=0.000004 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.126619 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 42 components and 0.126619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029864Jy  sigma=0.019220
! Fit after  self-cal, rms=0.029865Jy  sigma=0.019220
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029865Jy  sigma=0.019220
! Fit after  self-cal, rms=0.029902Jy  sigma=0.019220
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.968 mas, bmaj=4.218 mas, bpa=-7.411 degrees
! Estimated noise=22.6671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000222589 Jy
! Component: 100  -  total flux cleaned = -0.000208558 Jy
! Component: 150  -  total flux cleaned = -0.000187582 Jy
! Component: 200  -  total flux cleaned = -0.000171831 Jy
! Total flux subtracted in 200 components = -0.000171831 Jy
! Clean residual min=-0.001607 max=0.001702 Jy/beam
! Clean residual mean=0.000009 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.126447 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 43 components and 0.126447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029916Jy  sigma=0.019226
! Fit after  self-cal, rms=0.029903Jy  sigma=0.019220
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.42675e-07 Jy
! Component: 100  -  total flux cleaned = 1.18536e-05 Jy
! Component: 150  -  total flux cleaned = 2.98518e-05 Jy
! Component: 200  -  total flux cleaned = 4.36775e-05 Jy
! Total flux subtracted in 200 components = 4.36775e-05 Jy
! Clean residual min=-0.001600 max=0.001707 Jy/beam
! Clean residual mean=0.000009 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.126491 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 43 components and 0.126491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029917Jy  sigma=0.019227
! Fit after  self-cal, rms=0.029904Jy  sigma=0.019221
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.061 mas, bmaj=2.558 mas, bpa=2.68 degrees
! Estimated noise=18.5827 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.061 x 2.558 at 2.68 degrees (North through East)
! Clean map  min=-0.0013742  max=0.09087 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8714 mas, bmaj=2.228 mas, bpa=2.37 degrees
! Estimated noise=29.1565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0676161 Jy
! Component: 100  -  total flux cleaned = 0.0937127 Jy
! Component: 150  -  total flux cleaned = 0.107015 Jy
! Component: 200  -  total flux cleaned = 0.114902 Jy
! Total flux subtracted in 200 components = 0.114902 Jy
! Clean residual min=-0.003996 max=0.004150 Jy/beam
! Clean residual mean=0.000002 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.114902 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.114902 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.061 mas, bmaj=2.558 mas, bpa=2.68 degrees
! Estimated noise=18.5827 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00557905 Jy
! Component: 100  -  total flux cleaned = 0.00836161 Jy
! Component: 150  -  total flux cleaned = 0.0098103 Jy
! Component: 200  -  total flux cleaned = 0.0105685 Jy
! Total flux subtracted in 200 components = 0.0105685 Jy
! Clean residual min=-0.001676 max=0.001636 Jy/beam
! Clean residual mean=0.000004 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.12547 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 18 components and 0.12547 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.968 mas, bmaj=4.218 mas, bpa=-7.411 degrees
! Estimated noise=22.6671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000517244 Jy
! Component: 100  -  total flux cleaned = 0.00055155 Jy
! Component: 150  -  total flux cleaned = 0.000589573 Jy
! Component: 200  -  total flux cleaned = 0.000618473 Jy
! Total flux subtracted in 200 components = 0.000618473 Jy
! Clean residual min=-0.001687 max=0.001705 Jy/beam
! Clean residual mean=0.000009 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.126089 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.49475e-05 Jy
! Component: 100  -  total flux cleaned = 2.09902e-05 Jy
! Component: 150  -  total flux cleaned = 2.71516e-05 Jy
! Component: 200  -  total flux cleaned = 3.87715e-05 Jy
! Total flux subtracted in 200 components = 3.87715e-05 Jy
! Clean residual min=-0.001658 max=0.001697 Jy/beam
! Clean residual mean=0.000009 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.126128 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 41 components and 0.126128 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.061 mas, bmaj=2.558 mas, bpa=2.68 degrees
! Estimated noise=18.5827 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000237247 Jy
! Component: 100  -  total flux cleaned = 0.000252588 Jy
! Component: 150  -  total flux cleaned = 0.000238128 Jy
! Component: 200  -  total flux cleaned = 0.000210326 Jy
! Total flux subtracted in 200 components = 0.000210326 Jy
! Clean residual min=-0.001596 max=0.001504 Jy/beam
! Clean residual mean=0.000004 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.126338 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 50 components and 0.126338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029929Jy  sigma=0.019238
! Fit after  self-cal, rms=0.029927Jy  sigma=0.019237
wmodel /scr/pima/bp171a7_uvs/J1453+1036_X_map.mod
! Writing 50 model components to file: /scr/pima/bp171a7_uvs/J1453+1036_X_map.mod
wobs /scr/pima/bp171a7_uvs/J1453+1036_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1453+1036_X_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1453+1036_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bp171a7_uvs/J1453+1036_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000257355 Jy
! Component: 100  -  total flux cleaned = -0.000334403 Jy
! Component: 150  -  total flux cleaned = -0.000334425 Jy
! Component: 200  -  total flux cleaned = -0.00037748 Jy
! Component: 250  -  total flux cleaned = -0.000460315 Jy
! Component: 300  -  total flux cleaned = -0.000578625 Jy
! Component: 350  -  total flux cleaned = -0.000711158 Jy
! Component: 400  -  total flux cleaned = -0.000820105 Jy
! Component: 450  -  total flux cleaned = -0.000872797 Jy
! Component: 500  -  total flux cleaned = -0.000907038 Jy
! Component: 550  -  total flux cleaned = -0.000923485 Jy
! Component: 600  -  total flux cleaned = -0.000939495 Jy
! Component: 650  -  total flux cleaned = -0.0010012 Jy
! Component: 700  -  total flux cleaned = -0.00106098 Jy
! Component: 750  -  total flux cleaned = -0.00113377 Jy
! Component: 800  -  total flux cleaned = -0.00126115 Jy
! Component: 850  -  total flux cleaned = -0.00135757 Jy
! Component: 900  -  total flux cleaned = -0.00146519 Jy
! Component: 950  -  total flux cleaned = -0.00155663 Jy
! Component: 1000  -  total flux cleaned = -0.00163322 Jy
! Component: 1050  -  total flux cleaned = -0.0016582 Jy
! Component: 1100  -  total flux cleaned = -0.00173159 Jy
! Component: 1150  -  total flux cleaned = -0.00171986 Jy
! Component: 1200  -  total flux cleaned = -0.00176676 Jy
! Component: 1250  -  total flux cleaned = -0.0018353 Jy
! Component: 1300  -  total flux cleaned = -0.00192513 Jy
! Component: 1350  -  total flux cleaned = -0.00198045 Jy
! Component: 1400  -  total flux cleaned = -0.0020993 Jy
! Component: 1450  -  total flux cleaned = -0.00212054 Jy
! Component: 1500  -  total flux cleaned = -0.00221412 Jy
! Component: 1550  -  total flux cleaned = -0.00222409 Jy
! Component: 1600  -  total flux cleaned = -0.00226404 Jy
! Component: 1650  -  total flux cleaned = -0.00229346 Jy
! Component: 1700  -  total flux cleaned = -0.00232269 Jy
! Component: 1750  -  total flux cleaned = -0.00238952 Jy
! Component: 1800  -  total flux cleaned = -0.00239883 Jy
! Component: 1850  -  total flux cleaned = -0.00244505 Jy
! Component: 1900  -  total flux cleaned = -0.00248139 Jy
! Component: 1950  -  total flux cleaned = -0.00249035 Jy
! Component: 2000  -  total flux cleaned = -0.00253464 Jy
! Component: 2050  -  total flux cleaned = -0.00256077 Jy
! Component: 2100  -  total flux cleaned = -0.00254368 Jy
! Component: 2150  -  total flux cleaned = -0.00259486 Jy
! Component: 2200  -  total flux cleaned = -0.00260331 Jy
! Component: 2250  -  total flux cleaned = -0.00265322 Jy
! Component: 2300  -  total flux cleaned = -0.00269421 Jy
! Component: 2350  -  total flux cleaned = -0.00272662 Jy
! Component: 2400  -  total flux cleaned = -0.00277484 Jy
! Component: 2450  -  total flux cleaned = -0.0028146 Jy
! Component: 2500  -  total flux cleaned = -0.00286969 Jy
! Component: 2550  -  total flux cleaned = -0.00290077 Jy
! Component: 2600  -  total flux cleaned = -0.0029548 Jy
! Component: 2650  -  total flux cleaned = -0.00299298 Jy
! Component: 2700  -  total flux cleaned = -0.00303077 Jy
! Component: 2750  -  total flux cleaned = -0.00307585 Jy
! Component: 2800  -  total flux cleaned = -0.00312793 Jy
! Component: 2850  -  total flux cleaned = -0.00315009 Jy
! Component: 2900  -  total flux cleaned = -0.003194 Jy
! Component: 2950  -  total flux cleaned = -0.00321573 Jy
! Component: 3000  -  total flux cleaned = -0.00326619 Jy
! Component: 3050  -  total flux cleaned = -0.00327337 Jy
! Component: 3100  -  total flux cleaned = -0.00329473 Jy
! Component: 3150  -  total flux cleaned = -0.00331592 Jy
! Component: 3200  -  total flux cleaned = -0.00333701 Jy
! Component: 3250  -  total flux cleaned = -0.00336494 Jy
! Component: 3300  -  total flux cleaned = -0.00338576 Jy
! Component: 3350  -  total flux cleaned = -0.00339264 Jy
! Component: 3400  -  total flux cleaned = -0.00338582 Jy
! Component: 3450  -  total flux cleaned = -0.00342686 Jy
! Component: 3500  -  total flux cleaned = -0.00344041 Jy
! Component: 3550  -  total flux cleaned = -0.0034539 Jy
! Component: 3600  -  total flux cleaned = -0.00346068 Jy
! Component: 3650  -  total flux cleaned = -0.00348083 Jy
! Component: 3700  -  total flux cleaned = -0.00349424 Jy
! Component: 3750  -  total flux cleaned = -0.00350758 Jy
! Component: 3800  -  total flux cleaned = -0.0035275 Jy
! Component: 3850  -  total flux cleaned = -0.00356714 Jy
! Component: 3900  -  total flux cleaned = -0.0035737 Jy
! Component: 3950  -  total flux cleaned = -0.00359336 Jy
! Component: 4000  -  total flux cleaned = -0.00362606 Jy
! Component: 4050  -  total flux cleaned = -0.00363909 Jy
! Total flux subtracted in 4096 components = -0.0036651 Jy
! Clean residual min=-0.000371 max=0.000378 Jy/beam
! Clean residual mean=-0.000000 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.122673 Jy
keep
! Adding 263 model components to the UV plane model.
! The established model now contains 313 components and 0.122673 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1453+1036_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.061 x 2.558 at 2.68 degrees (North through East)
! Clean map  min=-0.0010469  max=0.092108 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1453+1036_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0921084 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000108608 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.353739 0.353739 0.707478 1.41496 2.82991 5.65983 11.3197 22.6393 45.2786 90.5572
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.092 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1453+1036_X_uvs.log closed on Sun May 12 14:05:54 2013