! Started logfile: /scr/pima/bp171a7_uvs/J1424-1750_X_uvs.log on Sun May 12 14:05:35 2013
obs /scr/pima/bp171a7_uvs/J1424-1750_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1424-1750_X_uva.fits
! AN table 1: 40 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.45625 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1424-1750
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5256 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1424-1750_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000752Jy  sigma=0.701232
! Fit after  self-cal, rms=0.984599Jy  sigma=0.696184
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8973 mas, bmaj=3.534 mas, bpa=16.76 degrees
! Estimated noise=23.3396 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123293 Jy
! Component: 100  -  total flux cleaned = 0.0135416 Jy
! Total flux subtracted in 100 components = 0.0135416 Jy
! Clean residual min=-0.002238 max=0.002161 Jy/beam
! Clean residual mean=-0.000003 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.0135416 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0135416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026633Jy  sigma=0.018830
! Fit after  self-cal, rms=0.024775Jy  sigma=0.017516
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00358883 Jy
! Component: 100  -  total flux cleaned = 0.00367393 Jy
! Total flux subtracted in 100 components = 0.00367393 Jy
! Clean residual min=-0.001843 max=0.001881 Jy/beam
! Clean residual mean=-0.000003 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.0172156 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.0172156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024149Jy  sigma=0.017074
! Fit after  self-cal, rms=0.024136Jy  sigma=0.017065
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=4.288 mas, bpa=17.13 degrees
! Estimated noise=14.351 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000470667 Jy
! Component: 100  -  total flux cleaned = 0.000598679 Jy
! Component: 150  -  total flux cleaned = 0.00066414 Jy
! Component: 200  -  total flux cleaned = 0.000743295 Jy
! Total flux subtracted in 200 components = 0.000743295 Jy
! Clean residual min=-0.001534 max=0.001522 Jy/beam
! Clean residual mean=-0.000009 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.0179589 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 18 components and 0.0179589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024014Jy  sigma=0.016979
! Fit after  self-cal, rms=0.023996Jy  sigma=0.016966
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.47     HN        0.76     KP        0.76     LA        1.15     
!   MK        1.00*    NL        0.86     OV        0.84     PT        0.92     
!   SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        0.77     KP        0.87     LA        1.12     
!   MK        1.00*    NL        0.95     OV        1.08     PT        0.94     
!   SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.30     HN        0.95     KP        1.20     LA        0.93     
!   MK        1.00*    NL        1.09     OV        1.14     PT        0.81     
!   SC        0.89     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.35     HN        0.91     KP        1.15     LA        0.87     
!   MK        1.00*    NL        1.02     OV        0.98     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.26     HN        0.86     KP        1.14     LA        0.99     
!   MK        1.00*    NL        0.85     OV        1.08     PT        0.79     
!   SC        0.96     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     HN        0.87     KP        1.06     LA        0.99     
!   MK        1.00*    NL        0.78     OV        1.07     PT        0.86     
!   SC        1.08     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.18     HN        0.83     KP        1.35     LA        0.96     
!   MK        1.00*    NL        1.01     OV        1.01     PT        0.73     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.30     HN        0.76     KP        1.10     LA        0.93     
!   MK        1.00*    NL        0.89     OV        1.01     PT        0.80     
!   SC        1.31     
! 
! 
! Fit before self-cal, rms=0.023996Jy  sigma=0.016966
! Fit after  self-cal, rms=0.024540Jy  sigma=0.016691
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.159 mas, bmaj=4.147 mas, bpa=17.3 degrees
! Estimated noise=14.4884 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0001309 Jy
! Component: 100  -  total flux cleaned = 0.000131322 Jy
! Component: 150  -  total flux cleaned = 0.000111517 Jy
! Component: 200  -  total flux cleaned = 0.000111759 Jy
! Total flux subtracted in 200 components = 0.000111759 Jy
! Clean residual min=-0.000890 max=0.000873 Jy/beam
! Clean residual mean=-0.000001 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0180706 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 27 components and 0.0180706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024535Jy  sigma=0.016688
! Fit after  self-cal, rms=0.024731Jy  sigma=0.016617
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024731Jy  sigma=0.016617
! Fit after  self-cal, rms=0.025933Jy  sigma=0.016600
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.166 mas, bmaj=4.099 mas, bpa=17.4 degrees
! Estimated noise=14.621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0001244 Jy
! Component: 100  -  total flux cleaned = 0.000116823 Jy
! Component: 150  -  total flux cleaned = 0.000116619 Jy
! Component: 200  -  total flux cleaned = 0.000110463 Jy
! Total flux subtracted in 200 components = 0.000110463 Jy
! Clean residual min=-0.000907 max=0.000835 Jy/beam
! Clean residual mean=-0.000001 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.0181811 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 33 components and 0.0181811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025929Jy  sigma=0.016596
! Fit after  self-cal, rms=0.026022Jy  sigma=0.016575
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.31831e-05 Jy
! Component: 100  -  total flux cleaned = -1.50103e-06 Jy
! Component: 150  -  total flux cleaned = -2.21352e-05 Jy
! Component: 200  -  total flux cleaned = -2.2276e-05 Jy
! Total flux subtracted in 200 components = -2.2276e-05 Jy
! Clean residual min=-0.000899 max=0.000775 Jy/beam
! Clean residual mean=-0.000001 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.0181588 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 40 components and 0.0181588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026015Jy  sigma=0.016571
! Fit after  self-cal, rms=0.026021Jy  sigma=0.016569
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026021Jy  sigma=0.016569
! Fit after  self-cal, rms=0.026524Jy  sigma=0.016565
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.169 mas, bmaj=4.093 mas, bpa=17.39 degrees
! Estimated noise=14.6855 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.88137e-05 Jy
! Component: 100  -  total flux cleaned = 3.45116e-05 Jy
! Component: 150  -  total flux cleaned = 3.44865e-05 Jy
! Component: 200  -  total flux cleaned = 3.46163e-05 Jy
! Total flux subtracted in 200 components = 3.46163e-05 Jy
! Clean residual min=-0.000915 max=0.000758 Jy/beam
! Clean residual mean=-0.000000 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.0181934 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 42 components and 0.0181934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026520Jy  sigma=0.016563
! Fit after  self-cal, rms=0.026553Jy  sigma=0.016560
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.07701e-05 Jy
! Component: 100  -  total flux cleaned = 9.90581e-06 Jy
! Component: 150  -  total flux cleaned = 3.46642e-06 Jy
! Component: 200  -  total flux cleaned = -2.19613e-06 Jy
! Total flux subtracted in 200 components = -2.19613e-06 Jy
! Clean residual min=-0.000903 max=0.000745 Jy/beam
! Clean residual mean=-0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0181912 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 44 components and 0.0181912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026549Jy  sigma=0.016558
! Fit after  self-cal, rms=0.026551Jy  sigma=0.016557
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026551Jy  sigma=0.016557
! Fit after  self-cal, rms=0.026756Jy  sigma=0.016556
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.546 mas, bmaj=5.161 mas, bpa=9.63 degrees
! Estimated noise=17.3262 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.35357e-05 Jy
! Component: 100  -  total flux cleaned = 3.27232e-05 Jy
! Component: 150  -  total flux cleaned = 2.44442e-05 Jy
! Component: 200  -  total flux cleaned = 1.68711e-05 Jy
! Total flux subtracted in 200 components = 1.68711e-05 Jy
! Clean residual min=-0.000890 max=0.000773 Jy/beam
! Clean residual mean=-0.000000 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.0182081 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 49 components and 0.0182081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026754Jy  sigma=0.016555
! Fit after  self-cal, rms=0.026762Jy  sigma=0.016550
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.10703e-05 Jy
! Component: 100  -  total flux cleaned = 1.11999e-05 Jy
! Component: 150  -  total flux cleaned = 1.96129e-06 Jy
! Component: 200  -  total flux cleaned = -6.58932e-06 Jy
! Total flux subtracted in 200 components = -6.58932e-06 Jy
! Clean residual min=-0.000889 max=0.000764 Jy/beam
! Clean residual mean=-0.000000 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.0182015 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 51 components and 0.0182015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026759Jy  sigma=0.016549
! Fit after  self-cal, rms=0.026759Jy  sigma=0.016548
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.17 mas, bmaj=4.093 mas, bpa=17.38 degrees
! Estimated noise=14.7259 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.17 x 4.093 at 17.38 degrees (North through East)
! Clean map  min=-0.0014503  max=0.016453 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9125 mas, bmaj=3.367 mas, bpa=17.08 degrees
! Estimated noise=23.7823 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0150133 Jy
! Component: 100  -  total flux cleaned = 0.016763 Jy
! Component: 150  -  total flux cleaned = 0.0171902 Jy
! Component: 200  -  total flux cleaned = 0.0176133 Jy
! Total flux subtracted in 200 components = 0.0176133 Jy
! Clean residual min=-0.001241 max=0.001239 Jy/beam
! Clean residual mean=-0.000001 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.0176133 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0176133 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.17 mas, bmaj=4.093 mas, bpa=17.38 degrees
! Estimated noise=14.7259 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000377735 Jy
! Component: 100  -  total flux cleaned = 0.000475426 Jy
! Component: 150  -  total flux cleaned = 0.000500242 Jy
! Component: 200  -  total flux cleaned = 0.000543466 Jy
! Total flux subtracted in 200 components = 0.000543466 Jy
! Clean residual min=-0.000954 max=0.001051 Jy/beam
! Clean residual mean=-0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.0181567 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 25 components and 0.0181567 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.546 mas, bmaj=5.161 mas, bpa=9.63 degrees
! Estimated noise=17.3262 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155336 Jy
! Component: 100  -  total flux cleaned = 0.000156053 Jy
! Component: 150  -  total flux cleaned = 0.00015649 Jy
! Component: 200  -  total flux cleaned = 0.000146675 Jy
! Total flux subtracted in 200 components = 0.000146675 Jy
! Clean residual min=-0.000978 max=0.000811 Jy/beam
! Clean residual mean=-0.000001 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.0183034 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.537e-06 Jy
! Component: 100  -  total flux cleaned = -1.83495e-05 Jy
! Component: 150  -  total flux cleaned = -2.65337e-05 Jy
! Component: 200  -  total flux cleaned = -2.66765e-05 Jy
! Total flux subtracted in 200 components = -2.66765e-05 Jy
! Clean residual min=-0.000970 max=0.000769 Jy/beam
! Clean residual mean=-0.000001 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.0182767 Jy
! Adding 9 model components to the UV plane model.
! The established model now contains 32 components and 0.0182767 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.17 mas, bmaj=4.093 mas, bpa=17.38 degrees
! Estimated noise=14.7259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.95266e-05 Jy
! Component: 100  -  total flux cleaned = 5.51386e-05 Jy
! Component: 150  -  total flux cleaned = 6.56453e-05 Jy
! Component: 200  -  total flux cleaned = 5.77345e-05 Jy
! Total flux subtracted in 200 components = 5.77345e-05 Jy
! Clean residual min=-0.000900 max=0.000739 Jy/beam
! Clean residual mean=-0.000000 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.0183345 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 40 components and 0.0183345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026765Jy  sigma=0.016551
! Fit after  self-cal, rms=0.026764Jy  sigma=0.016550
wmodel /scr/pima/bp171a7_uvs/J1424-1750_X_map.mod
! Writing 40 model components to file: /scr/pima/bp171a7_uvs/J1424-1750_X_map.mod
wobs /scr/pima/bp171a7_uvs/J1424-1750_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1424-1750_X_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1424-1750_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bp171a7_uvs/J1424-1750_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00023521 Jy
! Component: 100  -  total flux cleaned = -0.000286007 Jy
! Component: 150  -  total flux cleaned = -0.000297813 Jy
! Component: 200  -  total flux cleaned = -0.000234182 Jy
! Component: 250  -  total flux cleaned = -0.00010355 Jy
! Component: 300  -  total flux cleaned = 2.03384e-05 Jy
! Component: 350  -  total flux cleaned = 0.000138694 Jy
! Component: 400  -  total flux cleaned = 0.000225943 Jy
! Component: 450  -  total flux cleaned = 0.000326877 Jy
! Component: 500  -  total flux cleaned = 0.000407703 Jy
! Component: 550  -  total flux cleaned = 0.000485733 Jy
! Component: 600  -  total flux cleaned = 0.000561173 Jy
! Component: 650  -  total flux cleaned = 0.00059755 Jy
! Component: 700  -  total flux cleaned = 0.000611707 Jy
! Component: 750  -  total flux cleaned = 0.000632501 Jy
! Component: 800  -  total flux cleaned = 0.000639289 Jy
! Component: 850  -  total flux cleaned = 0.000658888 Jy
! Component: 900  -  total flux cleaned = 0.000659076 Jy
! Component: 950  -  total flux cleaned = 0.000677757 Jy
! Component: 1000  -  total flux cleaned = 0.000683809 Jy
! Component: 1050  -  total flux cleaned = 0.000689611 Jy
! Component: 1100  -  total flux cleaned = 0.000706573 Jy
! Component: 1150  -  total flux cleaned = 0.00071207 Jy
! Component: 1200  -  total flux cleaned = 0.000717596 Jy
! Component: 1250  -  total flux cleaned = 0.00074435 Jy
! Component: 1300  -  total flux cleaned = 0.000754704 Jy
! Component: 1350  -  total flux cleaned = 0.000769964 Jy
! Component: 1400  -  total flux cleaned = 0.000764964 Jy
! Component: 1450  -  total flux cleaned = 0.000769885 Jy
! Component: 1500  -  total flux cleaned = 0.000765126 Jy
! Component: 1550  -  total flux cleaned = 0.000774719 Jy
! Component: 1600  -  total flux cleaned = 0.00078405 Jy
! Component: 1650  -  total flux cleaned = 0.000788631 Jy
! Component: 1700  -  total flux cleaned = 0.00079316 Jy
! Component: 1750  -  total flux cleaned = 0.000806599 Jy
! Component: 1800  -  total flux cleaned = 0.000815374 Jy
! Component: 1850  -  total flux cleaned = 0.000824116 Jy
! Component: 1900  -  total flux cleaned = 0.000832819 Jy
! Component: 1950  -  total flux cleaned = 0.00083282 Jy
! Component: 2000  -  total flux cleaned = 0.000845652 Jy
! Component: 2050  -  total flux cleaned = 0.000841398 Jy
! Component: 2100  -  total flux cleaned = 0.000841413 Jy
! Component: 2150  -  total flux cleaned = 0.000828836 Jy
! Component: 2200  -  total flux cleaned = 0.000841385 Jy
! Component: 2250  -  total flux cleaned = 0.000833048 Jy
! Component: 2300  -  total flux cleaned = 0.00083721 Jy
! Component: 2350  -  total flux cleaned = 0.000849605 Jy
! Component: 2400  -  total flux cleaned = 0.000845507 Jy
! Component: 2450  -  total flux cleaned = 0.000849618 Jy
! Component: 2500  -  total flux cleaned = 0.000849604 Jy
! Component: 2550  -  total flux cleaned = 0.000853653 Jy
! Component: 2600  -  total flux cleaned = 0.000849586 Jy
! Component: 2650  -  total flux cleaned = 0.000849597 Jy
! Component: 2700  -  total flux cleaned = 0.000857718 Jy
! Component: 2750  -  total flux cleaned = 0.00087396 Jy
! Component: 2800  -  total flux cleaned = 0.000882082 Jy
! Component: 2850  -  total flux cleaned = 0.000890242 Jy
! Component: 2900  -  total flux cleaned = 0.000902465 Jy
! Component: 2950  -  total flux cleaned = 0.000914764 Jy
! Component: 3000  -  total flux cleaned = 0.000914813 Jy
! Component: 3050  -  total flux cleaned = 0.000923057 Jy
! Component: 3100  -  total flux cleaned = 0.000935548 Jy
! Component: 3150  -  total flux cleaned = 0.000943908 Jy
! Component: 3200  -  total flux cleaned = 0.000948118 Jy
! Component: 3250  -  total flux cleaned = 0.000956604 Jy
! Component: 3300  -  total flux cleaned = 0.000965147 Jy
! Component: 3350  -  total flux cleaned = 0.000969449 Jy
! Component: 3400  -  total flux cleaned = 0.000978081 Jy
! Component: 3450  -  total flux cleaned = 0.000991168 Jy
! Component: 3500  -  total flux cleaned = 0.00101312 Jy
! Component: 3550  -  total flux cleaned = 0.00101757 Jy
! Component: 3600  -  total flux cleaned = 0.0010309 Jy
! Component: 3650  -  total flux cleaned = 0.00104882 Jy
! Component: 3700  -  total flux cleaned = 0.00106693 Jy
! Component: 3750  -  total flux cleaned = 0.00108516 Jy
! Component: 3800  -  total flux cleaned = 0.00109894 Jy
! Component: 3850  -  total flux cleaned = 0.00111284 Jy
! Component: 3900  -  total flux cleaned = 0.00113619 Jy
! Component: 3950  -  total flux cleaned = 0.00115508 Jy
! Component: 4000  -  total flux cleaned = 0.00116458 Jy
! Component: 4050  -  total flux cleaned = 0.00118856 Jy
! Total flux subtracted in 4096 components = 0.00120305 Jy
! Clean residual min=-0.000290 max=0.000304 Jy/beam
! Clean residual mean=0.000000 rms=0.000078 Jy/beam
! Combined flux in latest and established models = 0.0195375 Jy
keep
! Adding 211 model components to the UV plane model.
! The established model now contains 251 components and 0.0195375 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1424-1750_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.17 x 4.093 at 17.38 degrees (North through East)
! Clean map  min=-0.0010228  max=0.016249 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1424-1750_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0162486 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.54887e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.39376 1.39376 2.78752 5.57504 11.1501 22.3002 44.6003 89.2007
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.016 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1424-1750_X_uvs.log closed on Sun May 12 14:05:39 2013