! Started logfile: /scr/pima/bp171a7_uvs/J1424-1750_C_uvs.log on Sun May 12 14:55:07 2013
obs /scr/pima/bp171a7_uvs/J1424-1750_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1424-1750_C_uva.fits
! AN table 1: 40 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.738194 visibilities/baseline/integration-bin.
! Found source: J1424-1750
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8504 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1424-1750_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000119Jy  sigma=0.692316
! Fit after  self-cal, rms=0.988861Jy  sigma=0.684895
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.333 mas, bmaj=4.045 mas, bpa=1.089 degrees
! Estimated noise=22.6383 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00888599 Jy
! Component: 100  -  total flux cleaned = 0.0111104 Jy
! Total flux subtracted in 100 components = 0.0111104 Jy
! Clean residual min=-0.001828 max=0.001742 Jy/beam
! Clean residual mean=-0.000000 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.0111104 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0111104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025476Jy  sigma=0.017645
! Fit after  self-cal, rms=0.023980Jy  sigma=0.016612
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00347056 Jy
! Component: 100  -  total flux cleaned = 0.00309687 Jy
! Total flux subtracted in 100 components = 0.00309687 Jy
! Clean residual min=-0.001699 max=0.001727 Jy/beam
! Clean residual mean=0.000001 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.0142073 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.0142073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023588Jy  sigma=0.016347
! Fit after  self-cal, rms=0.023562Jy  sigma=0.016330
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.668 mas, bmaj=4.871 mas, bpa=1.221 degrees
! Estimated noise=11.123 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000187828 Jy
! Component: 100  -  total flux cleaned = -0.000310705 Jy
! Component: 150  -  total flux cleaned = -0.000402381 Jy
! Component: 200  -  total flux cleaned = -0.00047214 Jy
! Total flux subtracted in 200 components = -0.00047214 Jy
! Clean residual min=-0.000825 max=0.001070 Jy/beam
! Clean residual mean=0.000001 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.0137351 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 17 components and 0.0137351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023518Jy  sigma=0.016300
! Fit after  self-cal, rms=0.023496Jy  sigma=0.016283
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        0.81     KP        0.93     LA        0.83     
!   MK        1.01     NL        0.90     OV        0.86     PT        0.79     
!   SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.15     HN        0.84     KP        0.93     LA        0.98     
!   MK        0.81     NL        0.97     OV        1.04     PT        0.91     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.40     HN        0.85     KP        0.94     LA        1.15     
!   MK        0.93     NL        1.01     OV        1.01     PT        0.95     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.51     HN        0.94     KP        1.03     LA        1.09     
!   MK        0.88     NL        0.97     OV        0.91     PT        0.99     
!   SC        1.09     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        0.90     KP        1.29     LA        1.33     
!   MK        0.91     NL        0.93     OV        0.84     PT        1.07     
!   SC        1.14     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     HN        1.14     KP        1.09     LA        1.49     
!   MK        1.00     NL        0.83     OV        0.98     PT        1.18     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.20     HN        0.88     KP        1.09     LA        1.25     
!   MK        0.86     NL        0.95     OV        1.06     PT        1.04     
!   SC        1.10     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.10     HN        0.85     KP        1.06     LA        1.09     
!   MK        0.94     NL        0.86     OV        1.09     PT        0.99     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.023496Jy  sigma=0.016283
! Fit after  self-cal, rms=0.023180Jy  sigma=0.016015
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.65 mas, bmaj=4.854 mas, bpa=0.3576 degrees
! Estimated noise=11.1702 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.68576e-05 Jy
! Component: 100  -  total flux cleaned = 2.16103e-05 Jy
! Component: 150  -  total flux cleaned = 2.16419e-05 Jy
! Component: 200  -  total flux cleaned = 2.16671e-05 Jy
! Total flux subtracted in 200 components = 2.16671e-05 Jy
! Clean residual min=-0.000670 max=0.000706 Jy/beam
! Clean residual mean=-0.000000 rms=0.000171 Jy/beam
! Combined flux in latest and established models = 0.0137568 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 30 components and 0.0137568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023178Jy  sigma=0.016014
! Fit after  self-cal, rms=0.023253Jy  sigma=0.015977
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023253Jy  sigma=0.015977
! Fit after  self-cal, rms=0.023825Jy  sigma=0.015969
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.645 mas, bmaj=4.845 mas, bpa=-0.07874 degrees
! Estimated noise=11.2316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.26533e-05 Jy
! Component: 100  -  total flux cleaned = -2.1754e-05 Jy
! Component: 150  -  total flux cleaned = -9.2015e-06 Jy
! Component: 200  -  total flux cleaned = -3.51289e-06 Jy
! Total flux subtracted in 200 components = -3.51289e-06 Jy
! Clean residual min=-0.000636 max=0.000689 Jy/beam
! Clean residual mean=-0.000001 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.0137533 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 0.0137533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023824Jy  sigma=0.015968
! Fit after  self-cal, rms=0.023872Jy  sigma=0.015964
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000165812 Jy
! Component: 100  -  total flux cleaned = -0.000163211 Jy
! Component: 150  -  total flux cleaned = -0.000168265 Jy
! Component: 200  -  total flux cleaned = -0.000168278 Jy
! Total flux subtracted in 200 components = -0.000168278 Jy
! Clean residual min=-0.000622 max=0.000661 Jy/beam
! Clean residual mean=-0.000001 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.013585 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 46 components and 0.013585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023871Jy  sigma=0.015963
! Fit after  self-cal, rms=0.023874Jy  sigma=0.015961
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023874Jy  sigma=0.015961
! Fit after  self-cal, rms=0.024051Jy  sigma=0.015960
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.642 mas, bmaj=4.839 mas, bpa=-0.1705 degrees
! Estimated noise=11.237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.5264e-06 Jy
! Component: 100  -  total flux cleaned = 4.81614e-06 Jy
! Component: 150  -  total flux cleaned = 1.50323e-05 Jy
! Component: 200  -  total flux cleaned = 2.15439e-05 Jy
! Total flux subtracted in 200 components = 2.15439e-05 Jy
! Clean residual min=-0.000600 max=0.000664 Jy/beam
! Clean residual mean=-0.000001 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.0136066 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 51 components and 0.0136066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024050Jy  sigma=0.015960
! Fit after  self-cal, rms=0.024065Jy  sigma=0.015959
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.83583e-05 Jy
! Component: 100  -  total flux cleaned = -6.03532e-05 Jy
! Component: 150  -  total flux cleaned = -5.13494e-05 Jy
! Component: 200  -  total flux cleaned = -4.75025e-05 Jy
! Total flux subtracted in 200 components = -4.75025e-05 Jy
! Clean residual min=-0.000606 max=0.000659 Jy/beam
! Clean residual mean=-0.000001 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.0135591 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 52 components and 0.0135591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024064Jy  sigma=0.015959
! Fit after  self-cal, rms=0.024067Jy  sigma=0.015958
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024067Jy  sigma=0.015958
! Fit after  self-cal, rms=0.024131Jy  sigma=0.015958
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.315 mas, bmaj=8.144 mas, bpa=-4.355 degrees
! Estimated noise=14.7674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.01924e-05 Jy
! Component: 100  -  total flux cleaned = -4.56075e-05 Jy
! Component: 150  -  total flux cleaned = -4.57127e-05 Jy
! Component: 200  -  total flux cleaned = -4.2136e-05 Jy
! Total flux subtracted in 200 components = -4.2136e-05 Jy
! Clean residual min=-0.000868 max=0.000733 Jy/beam
! Clean residual mean=-0.000001 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.0135169 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 53 components and 0.0135169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024130Jy  sigma=0.015958
! Fit after  self-cal, rms=0.024134Jy  sigma=0.015956
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.79621e-05 Jy
! Component: 100  -  total flux cleaned = -7.80744e-05 Jy
! Component: 150  -  total flux cleaned = -7.82938e-05 Jy
! Component: 200  -  total flux cleaned = -7.79765e-05 Jy
! Total flux subtracted in 200 components = -7.79765e-05 Jy
! Clean residual min=-0.000865 max=0.000737 Jy/beam
! Clean residual mean=-0.000001 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0134389 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 53 components and 0.0134389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024134Jy  sigma=0.015956
! Fit after  self-cal, rms=0.024136Jy  sigma=0.015956
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.641 mas, bmaj=4.838 mas, bpa=-0.215 degrees
! Estimated noise=11.2412 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.641 x 4.838 at -0.215 degrees (North through East)
! Clean map  min=-0.0016758  max=0.015155 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.331 mas, bmaj=4.057 mas, bpa=-0.0737 degrees
! Estimated noise=22.5512 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011471 Jy
! Component: 100  -  total flux cleaned = 0.013137 Jy
! Component: 150  -  total flux cleaned = 0.0135271 Jy
! Component: 200  -  total flux cleaned = 0.0137 Jy
! Total flux subtracted in 200 components = 0.0137 Jy
! Clean residual min=-0.001364 max=0.001313 Jy/beam
! Clean residual mean=-0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.0137 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0137 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.641 mas, bmaj=4.838 mas, bpa=-0.215 degrees
! Estimated noise=11.2412 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111128 Jy
! Component: 100  -  total flux cleaned = 7.07202e-05 Jy
! Component: 150  -  total flux cleaned = 3.80172e-05 Jy
! Component: 200  -  total flux cleaned = -6.80416e-06 Jy
! Total flux subtracted in 200 components = -6.80416e-06 Jy
! Clean residual min=-0.000642 max=0.000701 Jy/beam
! Clean residual mean=-0.000001 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.0136932 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 25 components and 0.0136932 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.315 mas, bmaj=8.144 mas, bpa=-4.355 degrees
! Estimated noise=14.7674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000173919 Jy
! Component: 100  -  total flux cleaned = -0.000174362 Jy
! Component: 150  -  total flux cleaned = -0.000186034 Jy
! Component: 200  -  total flux cleaned = -0.00020154 Jy
! Total flux subtracted in 200 components = -0.00020154 Jy
! Clean residual min=-0.000872 max=0.000756 Jy/beam
! Clean residual mean=-0.000001 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.0134917 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.34577e-05 Jy
! Component: 100  -  total flux cleaned = -2.55382e-05 Jy
! Component: 150  -  total flux cleaned = -3.2693e-05 Jy
! Component: 200  -  total flux cleaned = -4.26048e-05 Jy
! Total flux subtracted in 200 components = -4.26048e-05 Jy
! Clean residual min=-0.000871 max=0.000744 Jy/beam
! Clean residual mean=-0.000001 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0134491 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 33 components and 0.0134491 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.641 mas, bmaj=4.838 mas, bpa=-0.215 degrees
! Estimated noise=11.2412 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.75764e-05 Jy
! Component: 100  -  total flux cleaned = 5.89206e-05 Jy
! Component: 150  -  total flux cleaned = 4.25501e-05 Jy
! Component: 200  -  total flux cleaned = 3.76171e-05 Jy
! Total flux subtracted in 200 components = 3.76171e-05 Jy
! Clean residual min=-0.000622 max=0.000634 Jy/beam
! Clean residual mean=-0.000001 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.0134867 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 43 components and 0.0134867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024140Jy  sigma=0.015958
! Fit after  self-cal, rms=0.024137Jy  sigma=0.015957
wmodel /scr/pima/bp171a7_uvs/J1424-1750_C_map.mod
! Writing 43 model components to file: /scr/pima/bp171a7_uvs/J1424-1750_C_map.mod
wobs /scr/pima/bp171a7_uvs/J1424-1750_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1424-1750_C_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1424-1750_C_map.win
! wwins: Wrote 1 windows to /scr/pima/bp171a7_uvs/J1424-1750_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181095 Jy
! Component: 100  -  total flux cleaned = 0.000266931 Jy
! Component: 150  -  total flux cleaned = 0.000406779 Jy
! Component: 200  -  total flux cleaned = 0.000482161 Jy
! Component: 250  -  total flux cleaned = 0.000535768 Jy
! Component: 300  -  total flux cleaned = 0.00053567 Jy
! Component: 350  -  total flux cleaned = 0.000535405 Jy
! Component: 400  -  total flux cleaned = 0.000551349 Jy
! Component: 450  -  total flux cleaned = 0.00055134 Jy
! Component: 500  -  total flux cleaned = 0.000589302 Jy
! Component: 550  -  total flux cleaned = 0.000618658 Jy
! Component: 600  -  total flux cleaned = 0.000640248 Jy
! Component: 650  -  total flux cleaned = 0.000661328 Jy
! Component: 700  -  total flux cleaned = 0.000688652 Jy
! Component: 750  -  total flux cleaned = 0.000688538 Jy
! Component: 800  -  total flux cleaned = 0.000668993 Jy
! Component: 850  -  total flux cleaned = 0.000662759 Jy
! Component: 900  -  total flux cleaned = 0.000668967 Jy
! Component: 950  -  total flux cleaned = 0.00066266 Jy
! Component: 1000  -  total flux cleaned = 0.000650589 Jy
! Component: 1050  -  total flux cleaned = 0.000656406 Jy
! Component: 1100  -  total flux cleaned = 0.00063905 Jy
! Component: 1150  -  total flux cleaned = 0.000644854 Jy
! Component: 1200  -  total flux cleaned = 0.000639216 Jy
! Component: 1250  -  total flux cleaned = 0.000633627 Jy
! Component: 1300  -  total flux cleaned = 0.000638903 Jy
! Component: 1350  -  total flux cleaned = 0.000660011 Jy
! Component: 1400  -  total flux cleaned = 0.000654646 Jy
! Component: 1450  -  total flux cleaned = 0.000623751 Jy
! Component: 1500  -  total flux cleaned = 0.000603529 Jy
! Component: 1550  -  total flux cleaned = 0.000583522 Jy
! Component: 1600  -  total flux cleaned = 0.000558878 Jy
! Component: 1650  -  total flux cleaned = 0.000534464 Jy
! Component: 1700  -  total flux cleaned = 0.000505588 Jy
! Component: 1750  -  total flux cleaned = 0.000472359 Jy
! Component: 1800  -  total flux cleaned = 0.000458313 Jy
! Component: 1850  -  total flux cleaned = 0.000435148 Jy
! Component: 1900  -  total flux cleaned = 0.000412214 Jy
! Component: 1950  -  total flux cleaned = 0.000385059 Jy
! Component: 2000  -  total flux cleaned = 0.000358181 Jy
! Component: 2050  -  total flux cleaned = 0.000322778 Jy
! Component: 2100  -  total flux cleaned = 0.000292145 Jy
! Component: 2150  -  total flux cleaned = 0.000266192 Jy
! Component: 2200  -  total flux cleaned = 0.000236186 Jy
! Component: 2250  -  total flux cleaned = 0.000206454 Jy
! Component: 2300  -  total flux cleaned = 0.000172716 Jy
! Component: 2350  -  total flux cleaned = 0.000139329 Jy
! Component: 2400  -  total flux cleaned = 0.000114478 Jy
! Component: 2450  -  total flux cleaned = 8.1749e-05 Jy
! Component: 2500  -  total flux cleaned = 6.95535e-05 Jy
! Component: 2550  -  total flux cleaned = 4.54699e-05 Jy
! Component: 2600  -  total flux cleaned = 2.15787e-05 Jy
! Component: 2650  -  total flux cleaned = 2.1579e-05 Jy
! Component: 2700  -  total flux cleaned = 5.87175e-06 Jy
! Component: 2750  -  total flux cleaned = -9.69001e-06 Jy
! Component: 2800  -  total flux cleaned = -5.8397e-06 Jy
! Component: 2850  -  total flux cleaned = -2.11918e-05 Jy
! Component: 2900  -  total flux cleaned = -2.8834e-05 Jy
! Component: 2950  -  total flux cleaned = -4.77299e-05 Jy
! Component: 3000  -  total flux cleaned = -5.52118e-05 Jy
! Component: 3050  -  total flux cleaned = -6.26792e-05 Jy
! Component: 3100  -  total flux cleaned = -6.63424e-05 Jy
! Component: 3150  -  total flux cleaned = -6.63534e-05 Jy
! Component: 3200  -  total flux cleaned = -6.63355e-05 Jy
! Component: 3250  -  total flux cleaned = -7.72171e-05 Jy
! Component: 3300  -  total flux cleaned = -7.72405e-05 Jy
! Component: 3350  -  total flux cleaned = -8.79674e-05 Jy
! Component: 3400  -  total flux cleaned = -7.02153e-05 Jy
! Component: 3450  -  total flux cleaned = -6.66936e-05 Jy
! Component: 3500  -  total flux cleaned = -5.61795e-05 Jy
! Component: 3550  -  total flux cleaned = -4.921e-05 Jy
! Component: 3600  -  total flux cleaned = -5.26714e-05 Jy
! Component: 3650  -  total flux cleaned = -4.92253e-05 Jy
! Component: 3700  -  total flux cleaned = -4.57885e-05 Jy
! Component: 3750  -  total flux cleaned = -3.89337e-05 Jy
! Component: 3800  -  total flux cleaned = -3.55372e-05 Jy
! Component: 3850  -  total flux cleaned = -3.21368e-05 Jy
! Component: 3900  -  total flux cleaned = -1.19648e-05 Jy
! Component: 3950  -  total flux cleaned = -1.94233e-06 Jy
! Component: 4000  -  total flux cleaned = -1.96327e-06 Jy
! Component: 4050  -  total flux cleaned = -5.25748e-06 Jy
! Total flux subtracted in 4096 components = 1.34426e-06 Jy
! Clean residual min=-0.000167 max=0.000188 Jy/beam
! Clean residual mean=-0.000000 rms=0.000057 Jy/beam
! Combined flux in latest and established models = 0.013488 Jy
keep
! Adding 283 model components to the UV plane model.
! The established model now contains 326 components and 0.013488 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1424-1750_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.641 x 4.838 at -0.215 degrees (North through East)
! Clean map  min=-0.0016325  max=0.015148 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1424-1750_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.015148 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 5.47661e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.08462 1.08462 2.16924 4.33847 8.67694 17.3539 34.7078 69.4155
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.015 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1424-1750_C_uvs.log closed on Sun May 12 14:55:11 2013