! Started logfile: /scr/pima/bp171a7_uvs/J1339-2348_X_uvs.log on Sun May 12 14:05:05 2013
obs /scr/pima/bp171a7_uvs/J1339-2348_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1339-2348_X_uva.fits
! AN table 1: 33 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.599327 visibilities/baseline/integration-bin.
! Found source: J1339-2348
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5696 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1339-2348_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999643Jy  sigma=0.691718
! Fit after  self-cal, rms=0.983442Jy  sigma=0.680559
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8261 mas, bmaj=2.122 mas, bpa=0.6116 degrees
! Estimated noise=34.3665 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131272 Jy
! Component: 100  -  total flux cleaned = 0.0166142 Jy
! Total flux subtracted in 100 components = 0.0166142 Jy
! Clean residual min=-0.003201 max=0.003835 Jy/beam
! Clean residual mean=-0.000004 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.0166142 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0166142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029711Jy  sigma=0.020614
! Fit after  self-cal, rms=0.027718Jy  sigma=0.019242
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00406143 Jy
! Component: 100  -  total flux cleaned = 0.00558994 Jy
! Total flux subtracted in 100 components = 0.00558994 Jy
! Clean residual min=-0.002684 max=0.003105 Jy/beam
! Clean residual mean=-0.000005 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.0222041 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.0222041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027323Jy  sigma=0.018966
! Fit after  self-cal, rms=0.027300Jy  sigma=0.018946
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.057 mas, bmaj=2.837 mas, bpa=0.9209 degrees
! Estimated noise=13.593 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00102716 Jy
! Component: 100  -  total flux cleaned = -0.00116789 Jy
! Component: 150  -  total flux cleaned = -0.0013228 Jy
! Component: 200  -  total flux cleaned = -0.00141807 Jy
! Total flux subtracted in 200 components = -0.00141807 Jy
! Clean residual min=-0.002547 max=0.003021 Jy/beam
! Clean residual mean=-0.000011 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.020786 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 25 components and 0.020786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027242Jy  sigma=0.018904
! Fit after  self-cal, rms=0.027231Jy  sigma=0.018899
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.73     HN        0.66     KP        0.80     LA        0.99     
!   MK        0.85     NL        0.71     OV        1.00     PT        0.98     
!   SC        0.87     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.53     HN        0.63     KP        0.91     LA        1.05     
!   MK        0.89     NL        0.84     OV        1.00     PT        1.11     
!   SC        0.79     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.60     HN        0.79     KP        0.92     LA        1.06     
!   MK        0.88     NL        0.79     OV        1.05     PT        1.23     
!   SC        0.92     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.73     HN        0.82     KP        0.85     LA        1.07     
!   MK        0.87     NL        0.69     OV        1.08     PT        1.10     
!   SC        0.92     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.70     HN        0.63     KP        0.90     LA        1.18     
!   MK        0.80     NL        0.75     OV        1.05     PT        1.02     
!   SC        0.81     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.55     HN        0.70     KP        0.86     LA        1.18     
!   MK        0.96     NL        0.70     OV        0.99     PT        1.08     
!   SC        0.82     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.37     HN        0.68     KP        0.84     LA        0.98     
!   MK        0.87     NL        0.75     OV        0.99     PT        1.06     
!   SC        0.93     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.51     HN        0.66     KP        0.97     LA        1.04     
!   MK        0.80     NL        0.69     OV        1.21     PT        0.92     
!   SC        1.06     
! 
! 
! Fit before self-cal, rms=0.027231Jy  sigma=0.018899
! Fit after  self-cal, rms=0.028037Jy  sigma=0.018253
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.029 mas, bmaj=2.83 mas, bpa=1.438 degrees
! Estimated noise=13.4622 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.83398e-05 Jy
! Component: 100  -  total flux cleaned = 0.000102165 Jy
! Component: 150  -  total flux cleaned = 0.000102177 Jy
! Component: 200  -  total flux cleaned = 0.000105341 Jy
! Total flux subtracted in 200 components = 0.000105341 Jy
! Clean residual min=-0.000834 max=0.000815 Jy/beam
! Clean residual mean=-0.000002 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.0208914 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 27 components and 0.0208914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028036Jy  sigma=0.018253
! Fit after  self-cal, rms=0.028616Jy  sigma=0.018025
! Inverting map 
! Added new window around map position (-5, 12.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000925301 Jy
! Component: 100  -  total flux cleaned = 0.000951894 Jy
! Component: 150  -  total flux cleaned = 0.000971702 Jy
! Component: 200  -  total flux cleaned = 0.000943396 Jy
! Total flux subtracted in 200 components = 0.000943396 Jy
! Clean residual min=-0.000875 max=0.000954 Jy/beam
! Clean residual mean=-0.000001 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.0218348 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 50 components and 0.0218348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028550Jy  sigma=0.017989
! Fit after  self-cal, rms=0.028613Jy  sigma=0.017969
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028613Jy  sigma=0.017969
! Fit after  self-cal, rms=0.030179Jy  sigma=0.017934
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.019 mas, bmaj=2.817 mas, bpa=1.755 degrees
! Estimated noise=13.387 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000244092 Jy
! Component: 100  -  total flux cleaned = 0.000170886 Jy
! Component: 150  -  total flux cleaned = 0.000148926 Jy
! Component: 200  -  total flux cleaned = 0.000148845 Jy
! Total flux subtracted in 200 components = 0.000148845 Jy
! Clean residual min=-0.000784 max=0.000807 Jy/beam
! Clean residual mean=-0.000002 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.0219836 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 62 components and 0.0219836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030162Jy  sigma=0.017925
! Fit after  self-cal, rms=0.030323Jy  sigma=0.017898
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000175536 Jy
! Component: 100  -  total flux cleaned = 0.000147932 Jy
! Component: 150  -  total flux cleaned = 0.000124488 Jy
! Component: 200  -  total flux cleaned = 0.000113939 Jy
! Total flux subtracted in 200 components = 0.000113939 Jy
! Clean residual min=-0.000781 max=0.000818 Jy/beam
! Clean residual mean=-0.000001 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.0220976 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 72 components and 0.0220976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030307Jy  sigma=0.017891
! Fit after  self-cal, rms=0.030333Jy  sigma=0.017888
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030333Jy  sigma=0.017888
! Fit after  self-cal, rms=0.030303Jy  sigma=0.017883
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=2.817 mas, bpa=2.122 degrees
! Estimated noise=13.1994 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000123619 Jy
! Component: 100  -  total flux cleaned = -0.000165857 Jy
! Component: 150  -  total flux cleaned = -0.000166141 Jy
! Component: 200  -  total flux cleaned = -0.000166187 Jy
! Total flux subtracted in 200 components = -0.000166187 Jy
! Clean residual min=-0.000727 max=0.000794 Jy/beam
! Clean residual mean=-0.000002 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0219314 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 73 components and 0.0219314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030290Jy  sigma=0.017876
! Fit after  self-cal, rms=0.030340Jy  sigma=0.017873
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.86327e-05 Jy
! Component: 100  -  total flux cleaned = 4.81096e-05 Jy
! Component: 150  -  total flux cleaned = 3.01608e-05 Jy
! Component: 200  -  total flux cleaned = 5.95768e-06 Jy
! Total flux subtracted in 200 components = 5.95768e-06 Jy
! Clean residual min=-0.000741 max=0.000807 Jy/beam
! Clean residual mean=-0.000002 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.0219373 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 73 components and 0.0219373 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030332Jy  sigma=0.017869
! Fit after  self-cal, rms=0.030358Jy  sigma=0.017867
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030358Jy  sigma=0.017867
! Fit after  self-cal, rms=0.030092Jy  sigma=0.017864
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.975 mas, bmaj=7.085 mas, bpa=-6.689 degrees
! Estimated noise=17.6093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000337733 Jy
! Component: 100  -  total flux cleaned = -0.000351154 Jy
! Component: 150  -  total flux cleaned = -0.000335638 Jy
! Component: 200  -  total flux cleaned = -0.000328959 Jy
! Total flux subtracted in 200 components = -0.000328959 Jy
! Clean residual min=-0.000911 max=0.000838 Jy/beam
! Clean residual mean=-0.000003 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.0216084 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 87 components and 0.0216084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030084Jy  sigma=0.017862
! Fit after  self-cal, rms=0.030120Jy  sigma=0.017848
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.75838e-05 Jy
! Component: 100  -  total flux cleaned = 6.5743e-05 Jy
! Component: 150  -  total flux cleaned = 7.24486e-05 Jy
! Component: 200  -  total flux cleaned = 9.16901e-05 Jy
! Total flux subtracted in 200 components = 9.16901e-05 Jy
! Clean residual min=-0.000907 max=0.000833 Jy/beam
! Clean residual mean=-0.000002 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.0217001 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 97 components and 0.0217001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030115Jy  sigma=0.017849
! Fit after  self-cal, rms=0.030133Jy  sigma=0.017845
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=2.821 mas, bpa=2.435 degrees
! Estimated noise=13.0252 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.008 x 2.821 at 2.435 degrees (North through East)
! Clean map  min=-0.0014803  max=0.020125 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8169 mas, bmaj=2.209 mas, bpa=2.982 degrees
! Estimated noise=31.5874 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144537 Jy
! Component: 100  -  total flux cleaned = 0.0190558 Jy
! Component: 150  -  total flux cleaned = 0.0216023 Jy
! Component: 200  -  total flux cleaned = 0.023148 Jy
! Total flux subtracted in 200 components = 0.023148 Jy
! Clean residual min=-0.001692 max=0.001698 Jy/beam
! Clean residual mean=-0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.023148 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.023148 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=2.821 mas, bpa=2.435 degrees
! Estimated noise=13.0252 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.87326e-06 Jy
! Component: 100  -  total flux cleaned = 3.27697e-05 Jy
! Component: 150  -  total flux cleaned = 6.67913e-05 Jy
! Component: 200  -  total flux cleaned = 3.8651e-05 Jy
! Total flux subtracted in 200 components = 3.8651e-05 Jy
! Clean residual min=-0.001514 max=0.001112 Jy/beam
! Clean residual mean=-0.000003 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.0231866 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 36 components and 0.0231866 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.975 mas, bmaj=7.085 mas, bpa=-6.689 degrees
! Estimated noise=17.6093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000765446 Jy
! Component: 100  -  total flux cleaned = -0.000765398 Jy
! Component: 150  -  total flux cleaned = -0.000765555 Jy
! Component: 200  -  total flux cleaned = -0.000782452 Jy
! Total flux subtracted in 200 components = -0.000782452 Jy
! Clean residual min=-0.001140 max=0.000935 Jy/beam
! Clean residual mean=-0.000004 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.0224042 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.55355e-05 Jy
! Component: 100  -  total flux cleaned = -4.6599e-05 Jy
! Component: 150  -  total flux cleaned = -7.45628e-05 Jy
! Component: 200  -  total flux cleaned = -9.97125e-05 Jy
! Total flux subtracted in 200 components = -9.97125e-05 Jy
! Clean residual min=-0.001086 max=0.000894 Jy/beam
! Clean residual mean=-0.000004 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.0223045 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 58 components and 0.0223045 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=2.821 mas, bpa=2.435 degrees
! Estimated noise=13.0252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000398247 Jy
! Component: 100  -  total flux cleaned = 0.000339353 Jy
! Component: 150  -  total flux cleaned = 0.000298918 Jy
! Component: 200  -  total flux cleaned = 0.000247503 Jy
! Total flux subtracted in 200 components = 0.000247503 Jy
! Clean residual min=-0.000878 max=0.000892 Jy/beam
! Clean residual mean=-0.000002 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.022552 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 69 components and 0.022552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030152Jy  sigma=0.017860
! Fit after  self-cal, rms=0.030113Jy  sigma=0.017856
wmodel /scr/pima/bp171a7_uvs/J1339-2348_X_map.mod
! Writing 69 model components to file: /scr/pima/bp171a7_uvs/J1339-2348_X_map.mod
wobs /scr/pima/bp171a7_uvs/J1339-2348_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1339-2348_X_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1339-2348_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a7_uvs/J1339-2348_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -9.00031e-05 Jy
! Component: 100  -  total flux cleaned = -0.0001548 Jy
! Component: 150  -  total flux cleaned = -0.000142573 Jy
! Component: 200  -  total flux cleaned = -0.000164961 Jy
! Component: 250  -  total flux cleaned = -0.000207456 Jy
! Component: 300  -  total flux cleaned = -0.000187188 Jy
! Component: 350  -  total flux cleaned = -0.000139167 Jy
! Component: 400  -  total flux cleaned = -0.00010211 Jy
! Component: 450  -  total flux cleaned = -3.96916e-05 Jy
! Component: 500  -  total flux cleaned = 3.04448e-06 Jy
! Component: 550  -  total flux cleaned = 3.15959e-06 Jy
! Component: 600  -  total flux cleaned = 3.5457e-06 Jy
! Component: 650  -  total flux cleaned = 3.47139e-05 Jy
! Component: 700  -  total flux cleaned = 3.46801e-05 Jy
! Component: 750  -  total flux cleaned = 4.94404e-05 Jy
! Component: 800  -  total flux cleaned = 5.64044e-05 Jy
! Component: 850  -  total flux cleaned = 6.34494e-05 Jy
! Component: 900  -  total flux cleaned = 7.71879e-05 Jy
! Component: 950  -  total flux cleaned = 7.71661e-05 Jy
! Component: 1000  -  total flux cleaned = 9.67805e-05 Jy
! Component: 1050  -  total flux cleaned = 9.03377e-05 Jy
! Component: 1100  -  total flux cleaned = 6.55654e-05 Jy
! Component: 1150  -  total flux cleaned = 7.17779e-05 Jy
! Component: 1200  -  total flux cleaned = 5.3756e-05 Jy
! Component: 1250  -  total flux cleaned = 4.2049e-05 Jy
! Component: 1300  -  total flux cleaned = 2.46754e-05 Jy
! Component: 1350  -  total flux cleaned = 7.62017e-06 Jy
! Component: 1400  -  total flux cleaned = -3.58438e-06 Jy
! Component: 1450  -  total flux cleaned = -3.66243e-06 Jy
! Component: 1500  -  total flux cleaned = -9.17467e-06 Jy
! Component: 1550  -  total flux cleaned = -3.85186e-06 Jy
! Component: 1600  -  total flux cleaned = -1.43578e-05 Jy
! Component: 1650  -  total flux cleaned = -4.02021e-05 Jy
! Component: 1700  -  total flux cleaned = -5.54927e-05 Jy
! Component: 1750  -  total flux cleaned = -6.55664e-05 Jy
! Component: 1800  -  total flux cleaned = -7.05234e-05 Jy
! Component: 1850  -  total flux cleaned = -7.05914e-05 Jy
! Component: 1900  -  total flux cleaned = -8.51424e-05 Jy
! Component: 1950  -  total flux cleaned = -8.51216e-05 Jy
! Component: 2000  -  total flux cleaned = -0.000113565 Jy
! Component: 2050  -  total flux cleaned = -0.000122869 Jy
! Component: 2100  -  total flux cleaned = -0.000141321 Jy
! Component: 2150  -  total flux cleaned = -0.000155038 Jy
! Component: 2200  -  total flux cleaned = -0.00019123 Jy
! Component: 2250  -  total flux cleaned = -0.000222707 Jy
! Component: 2300  -  total flux cleaned = -0.00026287 Jy
! Component: 2350  -  total flux cleaned = -0.00028504 Jy
! Component: 2400  -  total flux cleaned = -0.000315856 Jy
! Component: 2450  -  total flux cleaned = -0.000346459 Jy
! Component: 2500  -  total flux cleaned = -0.000363886 Jy
! Component: 2550  -  total flux cleaned = -0.000381184 Jy
! Component: 2600  -  total flux cleaned = -0.000385491 Jy
! Component: 2650  -  total flux cleaned = -0.000385502 Jy
! Component: 2700  -  total flux cleaned = -0.000385513 Jy
! Component: 2750  -  total flux cleaned = -0.000411013 Jy
! Component: 2800  -  total flux cleaned = -0.000402545 Jy
! Component: 2850  -  total flux cleaned = -0.00041521 Jy
! Component: 2900  -  total flux cleaned = -0.000411015 Jy
! Component: 2950  -  total flux cleaned = -0.000423523 Jy
! Component: 3000  -  total flux cleaned = -0.000431836 Jy
! Component: 3050  -  total flux cleaned = -0.000419383 Jy
! Component: 3100  -  total flux cleaned = -0.000419413 Jy
! Component: 3150  -  total flux cleaned = -0.000423547 Jy
! Component: 3200  -  total flux cleaned = -0.000419436 Jy
! Component: 3250  -  total flux cleaned = -0.000419433 Jy
! Component: 3300  -  total flux cleaned = -0.000419433 Jy
! Component: 3350  -  total flux cleaned = -0.000411257 Jy
! Component: 3400  -  total flux cleaned = -0.000411297 Jy
! Component: 3450  -  total flux cleaned = -0.000419459 Jy
! Component: 3500  -  total flux cleaned = -0.000419476 Jy
! Component: 3550  -  total flux cleaned = -0.000411368 Jy
! Component: 3600  -  total flux cleaned = -0.000411354 Jy
! Component: 3650  -  total flux cleaned = -0.000407277 Jy
! Component: 3700  -  total flux cleaned = -0.000407281 Jy
! Component: 3750  -  total flux cleaned = -0.000407279 Jy
! Component: 3800  -  total flux cleaned = -0.000407271 Jy
! Component: 3850  -  total flux cleaned = -0.000386927 Jy
! Component: 3900  -  total flux cleaned = -0.000378799 Jy
! Component: 3950  -  total flux cleaned = -0.000370641 Jy
! Component: 4000  -  total flux cleaned = -0.000370654 Jy
! Component: 4050  -  total flux cleaned = -0.000366594 Jy
! Total flux subtracted in 4096 components = -0.000354336 Jy
! Clean residual min=-0.000264 max=0.000255 Jy/beam
! Clean residual mean=-0.000000 rms=0.000065 Jy/beam
! Combined flux in latest and established models = 0.0221976 Jy
keep
! Adding 206 model components to the UV plane model.
! The established model now contains 275 components and 0.0221976 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1339-2348_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.008 x 2.821 at 2.435 degrees (North through East)
! Clean map  min=-0.0010306  max=0.01949 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1339-2348_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0194895 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 6.55246e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.00861 1.00861 2.01723 4.03445 8.0689 16.1378 32.2756 64.5512
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.019 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1339-2348_X_uvs.log closed on Sun May 12 14:05:10 2013