! Started logfile: /scr/pima/bp171a7_uvs/J1316+6927_X_uvs.log on Sun May 12 14:04:55 2013
obs /scr/pima/bp171a7_uvs/J1316+6927_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1316+6927_X_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.795635 visibilities/baseline/integration-bin.
! Found source: J1316+6927
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3208 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1316+6927_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.997002Jy  sigma=0.704809
! Fit after  self-cal, rms=0.951794Jy  sigma=0.672855
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6811 mas, bmaj=3.291 mas, bpa=40.32 degrees
! Estimated noise=32.2034 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0320351 Jy
! Component: 100  -  total flux cleaned = 0.047633 Jy
! Total flux subtracted in 100 components = 0.047633 Jy
! Clean residual min=-0.005134 max=0.008825 Jy/beam
! Clean residual mean=0.000086 rms=0.001500 Jy/beam
! Combined flux in latest and established models = 0.047633 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.047633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036241Jy  sigma=0.025615
! Fit after  self-cal, rms=0.035941Jy  sigma=0.025402
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103518 Jy
! Component: 100  -  total flux cleaned = 0.0170405 Jy
! Total flux subtracted in 100 components = 0.0170405 Jy
! Clean residual min=-0.003743 max=0.005622 Jy/beam
! Clean residual mean=0.000056 rms=0.001005 Jy/beam
! Combined flux in latest and established models = 0.0646734 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 0.0646734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029999Jy  sigma=0.021201
! Fit after  self-cal, rms=0.029953Jy  sigma=0.021169
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8553 mas, bmaj=3.72 mas, bpa=40.5 degrees
! Estimated noise=17.6601 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00924261 Jy
! Component: 100  -  total flux cleaned = 0.0147407 Jy
! Component: 150  -  total flux cleaned = 0.0183892 Jy
! Component: 200  -  total flux cleaned = 0.0208802 Jy
! Total flux subtracted in 200 components = 0.0208802 Jy
! Clean residual min=-0.002782 max=0.004931 Jy/beam
! Clean residual mean=0.000092 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.0855537 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 49 components and 0.0855537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026726Jy  sigma=0.018888
! Fit after  self-cal, rms=0.026688Jy  sigma=0.018861
! Inverting map 
! Added new window around map position (0.8, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00415357 Jy
! Component: 100  -  total flux cleaned = 0.00636075 Jy
! Component: 150  -  total flux cleaned = 0.00806961 Jy
! Component: 200  -  total flux cleaned = 0.00945364 Jy
! Total flux subtracted in 200 components = 0.00945364 Jy
! Clean residual min=-0.002392 max=0.002264 Jy/beam
! Clean residual mean=0.000044 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 0.0950073 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 80 components and 0.0950073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025973Jy  sigma=0.018355
! Fit after  self-cal, rms=0.025911Jy  sigma=0.018311
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.11     HN        1.01     KP        0.95     LA        1.00     
!   MK        0.96     NL        1.07     OV        1.11     PT        0.91     
!   SC        0.88     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        0.95     KP        0.97     LA        0.97     
!   MK        1.02     NL        1.01     OV        0.97     PT        0.91     
!   SC        1.09     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.18     HN        0.95     KP        1.11     LA        0.91     
!   MK        1.16     NL        1.07     OV        1.08     PT        0.92     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     HN        1.05     KP        0.94     LA        1.02     
!   MK        1.04     NL        0.98     OV        1.00     PT        0.94     
!   SC        0.96     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     HN        0.95     KP        1.10     LA        1.03     
!   MK        0.94     NL        0.96     OV        0.90     PT        0.89     
!   SC        1.07     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.14     KP        1.05     LA        1.06     
!   MK        1.00     NL        0.99     OV        1.05     PT        0.94     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        1.00     KP        1.06     LA        1.00     
!   MK        1.02     NL        0.98     OV        1.02     PT        0.87     
!   SC        0.89     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     HN        1.09     KP        1.09     LA        0.98     
!   MK        0.98     NL        1.01     OV        1.02     PT        0.87     
!   SC        1.23     
! 
! 
! Fit before self-cal, rms=0.025911Jy  sigma=0.018311
! Fit after  self-cal, rms=0.025499Jy  sigma=0.017791
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8573 mas, bmaj=3.746 mas, bpa=40.41 degrees
! Estimated noise=17.8095 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00019048 Jy
! Component: 100  -  total flux cleaned = -4.3651e-05 Jy
! Component: 150  -  total flux cleaned = 2.0429e-05 Jy
! Component: 200  -  total flux cleaned = 4.87111e-05 Jy
! Total flux subtracted in 200 components = 4.87111e-05 Jy
! Clean residual min=-0.001306 max=0.001584 Jy/beam
! Clean residual mean=0.000002 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.095056 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 99 components and 0.095056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025408Jy  sigma=0.017731
! Fit after  self-cal, rms=0.025429Jy  sigma=0.017722
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025429Jy  sigma=0.017722
! Fit after  self-cal, rms=0.025412Jy  sigma=0.017721
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.858 mas, bmaj=3.751 mas, bpa=40.44 degrees
! Estimated noise=17.7988 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.12956e-06 Jy
! Component: 100  -  total flux cleaned = 3.82627e-06 Jy
! Component: 150  -  total flux cleaned = -4.24627e-05 Jy
! Component: 200  -  total flux cleaned = -6.33215e-05 Jy
! Total flux subtracted in 200 components = -6.33215e-05 Jy
! Clean residual min=-0.001220 max=0.001502 Jy/beam
! Clean residual mean=0.000002 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.0949927 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 113 components and 0.0949927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025369Jy  sigma=0.017692
! Fit after  self-cal, rms=0.025367Jy  sigma=0.017690
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (40.8, 10.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010906 Jy
! Component: 100  -  total flux cleaned = 0.00121291 Jy
! Component: 150  -  total flux cleaned = 0.00134506 Jy
! Component: 200  -  total flux cleaned = 0.00138629 Jy
! Total flux subtracted in 200 components = 0.00138629 Jy
! Clean residual min=-0.001107 max=0.001250 Jy/beam
! Clean residual mean=-0.000003 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.096379 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 143 components and 0.096379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025300Jy  sigma=0.017643
! Fit after  self-cal, rms=0.025295Jy  sigma=0.017640
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025295Jy  sigma=0.017640
! Fit after  self-cal, rms=0.025273Jy  sigma=0.017636
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8582 mas, bmaj=3.752 mas, bpa=40.46 degrees
! Estimated noise=17.7887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000373594 Jy
! Component: 100  -  total flux cleaned = 0.000355302 Jy
! Component: 150  -  total flux cleaned = 0.000355668 Jy
! Component: 200  -  total flux cleaned = 0.000338796 Jy
! Total flux subtracted in 200 components = 0.000338796 Jy
! Clean residual min=-0.001051 max=0.001129 Jy/beam
! Clean residual mean=-0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.0967178 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 161 components and 0.0967178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025247Jy  sigma=0.017617
! Fit after  self-cal, rms=0.025246Jy  sigma=0.017616
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.58346e-05 Jy
! Component: 100  -  total flux cleaned = -6.56023e-05 Jy
! Component: 150  -  total flux cleaned = -6.64862e-05 Jy
! Component: 200  -  total flux cleaned = -5.22543e-05 Jy
! Total flux subtracted in 200 components = -5.22543e-05 Jy
! Clean residual min=-0.001050 max=0.001099 Jy/beam
! Clean residual mean=-0.000000 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0966656 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 176 components and 0.0966656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025230Jy  sigma=0.017606
! Fit after  self-cal, rms=0.025229Jy  sigma=0.017605
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025229Jy  sigma=0.017605
! Fit after  self-cal, rms=0.025224Jy  sigma=0.017604
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.046 mas, bmaj=4.591 mas, bpa=35.35 degrees
! Estimated noise=23.3672 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000222073 Jy
! Component: 100  -  total flux cleaned = 0.000108717 Jy
! Component: 150  -  total flux cleaned = 4.43152e-05 Jy
! Component: 200  -  total flux cleaned = 2.49591e-05 Jy
! Total flux subtracted in 200 components = 2.49591e-05 Jy
! Clean residual min=-0.001013 max=0.001067 Jy/beam
! Clean residual mean=0.000003 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.0966905 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 191 components and 0.0966905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025218Jy  sigma=0.017599
! Fit after  self-cal, rms=0.025217Jy  sigma=0.017599
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.42547e-05 Jy
! Component: 100  -  total flux cleaned = 3.59544e-05 Jy
! Component: 150  -  total flux cleaned = 2.76846e-05 Jy
! Component: 200  -  total flux cleaned = 2.76318e-05 Jy
! Total flux subtracted in 200 components = 2.76318e-05 Jy
! Clean residual min=-0.000990 max=0.001059 Jy/beam
! Clean residual mean=0.000002 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.0967182 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 207 components and 0.0967182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025213Jy  sigma=0.017596
! Fit after  self-cal, rms=0.025212Jy  sigma=0.017596
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8579 mas, bmaj=3.751 mas, bpa=40.49 degrees
! Estimated noise=17.7883 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8579 x 3.751 at 40.49 degrees (North through East)
! Clean map  min=-0.0010434  max=0.040319 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6804 mas, bmaj=3.321 mas, bpa=40.41 degrees
! Estimated noise=33.3723 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0331152 Jy
! Component: 100  -  total flux cleaned = 0.0496003 Jy
! Component: 150  -  total flux cleaned = 0.0599496 Jy
! Component: 200  -  total flux cleaned = 0.0671259 Jy
! Total flux subtracted in 200 components = 0.0671259 Jy
! Clean residual min=-0.003972 max=0.004456 Jy/beam
! Clean residual mean=0.000049 rms=0.001010 Jy/beam
! Combined flux in latest and established models = 0.0671259 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.0671259 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8579 mas, bmaj=3.751 mas, bpa=40.49 degrees
! Estimated noise=17.7883 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0089043 Jy
! Component: 100  -  total flux cleaned = 0.0142816 Jy
! Component: 150  -  total flux cleaned = 0.0178186 Jy
! Component: 200  -  total flux cleaned = 0.020384 Jy
! Total flux subtracted in 200 components = 0.020384 Jy
! Clean residual min=-0.001631 max=0.002282 Jy/beam
! Clean residual mean=0.000051 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.08751 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 56 components and 0.08751 Jy
! Inverting map 
! Added new window around map position (-0.8, -13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00226445 Jy
! Component: 100  -  total flux cleaned = 0.00389347 Jy
! Component: 150  -  total flux cleaned = 0.00522821 Jy
! Component: 200  -  total flux cleaned = 0.00634215 Jy
! Total flux subtracted in 200 components = 0.00634215 Jy
! Clean residual min=-0.001292 max=0.001135 Jy/beam
! Clean residual mean=0.000017 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.0938521 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 87 components and 0.0938521 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.046 mas, bmaj=4.591 mas, bpa=35.35 degrees
! Estimated noise=23.3672 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115815 Jy
! Component: 100  -  total flux cleaned = 0.00173089 Jy
! Component: 150  -  total flux cleaned = 0.00200139 Jy
! Component: 200  -  total flux cleaned = 0.00221553 Jy
! Total flux subtracted in 200 components = 0.00221553 Jy
! Clean residual min=-0.001225 max=0.001113 Jy/beam
! Clean residual mean=0.000010 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.0960676 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011694 Jy
! Component: 100  -  total flux cleaned = 0.000189467 Jy
! Component: 150  -  total flux cleaned = 0.000274362 Jy
! Component: 200  -  total flux cleaned = 0.000338301 Jy
! Total flux subtracted in 200 components = 0.000338301 Jy
! Clean residual min=-0.001158 max=0.001028 Jy/beam
! Clean residual mean=0.000006 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.0964059 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 143 components and 0.096406 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8579 mas, bmaj=3.751 mas, bpa=40.49 degrees
! Estimated noise=17.7883 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000129654 Jy
! Component: 100  -  total flux cleaned = 0.000255844 Jy
! Component: 150  -  total flux cleaned = 0.000365665 Jy
! Component: 200  -  total flux cleaned = 0.000406613 Jy
! Total flux subtracted in 200 components = 0.000406613 Jy
! Clean residual min=-0.001064 max=0.001081 Jy/beam
! Clean residual mean=0.000001 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.0968126 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 175 components and 0.0968126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025180Jy  sigma=0.017574
! Fit after  self-cal, rms=0.025171Jy  sigma=0.017567
wmodel /scr/pima/bp171a7_uvs/J1316+6927_X_map.mod
! Writing 175 model components to file: /scr/pima/bp171a7_uvs/J1316+6927_X_map.mod
wobs /scr/pima/bp171a7_uvs/J1316+6927_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1316+6927_X_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1316+6927_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bp171a7_uvs/J1316+6927_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000275108 Jy
! Component: 100  -  total flux cleaned = 0.000417083 Jy
! Component: 150  -  total flux cleaned = 0.000432907 Jy
! Component: 200  -  total flux cleaned = 0.000401373 Jy
! Component: 250  -  total flux cleaned = 0.000416257 Jy
! Component: 300  -  total flux cleaned = 0.000430359 Jy
! Component: 350  -  total flux cleaned = 0.00043052 Jy
! Component: 400  -  total flux cleaned = 0.000457612 Jy
! Component: 450  -  total flux cleaned = 0.000444393 Jy
! Component: 500  -  total flux cleaned = 0.000406465 Jy
! Component: 550  -  total flux cleaned = 0.000406645 Jy
! Component: 600  -  total flux cleaned = 0.000370497 Jy
! Component: 650  -  total flux cleaned = 0.000335455 Jy
! Component: 700  -  total flux cleaned = 0.000323992 Jy
! Component: 750  -  total flux cleaned = 0.000278937 Jy
! Component: 800  -  total flux cleaned = 0.000256884 Jy
! Component: 850  -  total flux cleaned = 0.000224428 Jy
! Component: 900  -  total flux cleaned = 0.000203272 Jy
! Component: 950  -  total flux cleaned = 0.000182573 Jy
! Component: 1000  -  total flux cleaned = 0.000151927 Jy
! Component: 1050  -  total flux cleaned = 0.000121801 Jy
! Component: 1100  -  total flux cleaned = 8.21631e-05 Jy
! Component: 1150  -  total flux cleaned = 4.30141e-05 Jy
! Component: 1200  -  total flux cleaned = 1.40571e-05 Jy
! Component: 1250  -  total flux cleaned = -4.29885e-05 Jy
! Component: 1300  -  total flux cleaned = -8.05531e-05 Jy
! Component: 1350  -  total flux cleaned = -0.00012693 Jy
! Component: 1400  -  total flux cleaned = -0.00017264 Jy
! Component: 1450  -  total flux cleaned = -0.000262991 Jy
! Component: 1500  -  total flux cleaned = -0.000334476 Jy
! Component: 1550  -  total flux cleaned = -0.000405062 Jy
! Component: 1600  -  total flux cleaned = -0.000501032 Jy
! Component: 1650  -  total flux cleaned = -0.000587396 Jy
! Component: 1700  -  total flux cleaned = -0.000672861 Jy
! Component: 1750  -  total flux cleaned = -0.000740707 Jy
! Component: 1800  -  total flux cleaned = -0.000849683 Jy
! Component: 1850  -  total flux cleaned = -0.000924465 Jy
! Component: 1900  -  total flux cleaned = -0.00100675 Jy
! Component: 1950  -  total flux cleaned = -0.00110466 Jy
! Component: 2000  -  total flux cleaned = -0.00120171 Jy
! Component: 2050  -  total flux cleaned = -0.00126597 Jy
! Component: 2100  -  total flux cleaned = -0.00136932 Jy
! Component: 2150  -  total flux cleaned = -0.00146395 Jy
! Component: 2200  -  total flux cleaned = -0.00156568 Jy
! Component: 2250  -  total flux cleaned = -0.00165103 Jy
! Component: 2300  -  total flux cleaned = -0.00175106 Jy
! Component: 2350  -  total flux cleaned = -0.00185034 Jy
! Component: 2400  -  total flux cleaned = -0.00193377 Jy
! Component: 2450  -  total flux cleaned = -0.00204676 Jy
! Component: 2500  -  total flux cleaned = -0.00213649 Jy
! Component: 2550  -  total flux cleaned = -0.00223307 Jy
! Component: 2600  -  total flux cleaned = -0.00232902 Jy
! Component: 2650  -  total flux cleaned = -0.00243891 Jy
! Component: 2700  -  total flux cleaned = -0.00254085 Jy
! Component: 2750  -  total flux cleaned = -0.00262037 Jy
! Component: 2800  -  total flux cleaned = -0.00271385 Jy
! Component: 2850  -  total flux cleaned = -0.00280683 Jy
! Component: 2900  -  total flux cleaned = -0.00290634 Jy
! Component: 2950  -  total flux cleaned = -0.00299817 Jy
! Component: 3000  -  total flux cleaned = -0.00308954 Jy
! Component: 3050  -  total flux cleaned = -0.0031804 Jy
! Component: 3100  -  total flux cleaned = -0.00327773 Jy
! Component: 3150  -  total flux cleaned = -0.00336076 Jy
! Component: 3200  -  total flux cleaned = -0.00345031 Jy
! Component: 3250  -  total flux cleaned = -0.00354629 Jy
! Component: 3300  -  total flux cleaned = -0.00364188 Jy
! Component: 3350  -  total flux cleaned = -0.00373024 Jy
! Component: 3400  -  total flux cleaned = -0.00382508 Jy
! Component: 3450  -  total flux cleaned = -0.00391277 Jy
! Component: 3500  -  total flux cleaned = -0.00399345 Jy
! Component: 3550  -  total flux cleaned = -0.00408054 Jy
! Component: 3600  -  total flux cleaned = -0.00417404 Jy
! Component: 3650  -  total flux cleaned = -0.0042406 Jy
! Component: 3700  -  total flux cleaned = -0.00431361 Jy
! Component: 3750  -  total flux cleaned = -0.00439305 Jy
! Component: 3800  -  total flux cleaned = -0.00445906 Jy
! Component: 3850  -  total flux cleaned = -0.00453153 Jy
! Component: 3900  -  total flux cleaned = -0.00461034 Jy
! Component: 3950  -  total flux cleaned = -0.00468243 Jy
! Component: 4000  -  total flux cleaned = -0.00474787 Jy
! Component: 4050  -  total flux cleaned = -0.00481971 Jy
! Total flux subtracted in 4096 components = -0.00487191 Jy
! Clean residual min=-0.000403 max=0.000462 Jy/beam
! Clean residual mean=-0.000003 rms=0.000108 Jy/beam
! Combined flux in latest and established models = 0.0919406 Jy
keep
! Adding 231 model components to the UV plane model.
! The established model now contains 406 components and 0.0919406 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1316+6927_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8579 x 3.751 at 40.49 degrees (North through East)
! Clean map  min=-0.00080663  max=0.040721 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1316+6927_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0407209 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000101817 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.750107 0.750107 1.50021 3.00043 6.00085 12.0017 24.0034 48.0068 96.0136
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.04 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1316+6927_X_uvs.log closed on Sun May 12 14:05:00 2013