! Started logfile: /scr/pima/bp171a7_uvs/J1316+6927_C_uvs.log on Sun May 12 14:54:28 2013
obs /scr/pima/bp171a7_uvs/J1316+6927_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1316+6927_C_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.795635 visibilities/baseline/integration-bin.
! Found source: J1316+6927
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3208 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1316+6927_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000788Jy  sigma=0.707486
! Fit after  self-cal, rms=0.941086Jy  sigma=0.665286
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.195 mas, bmaj=5.902 mas, bpa=40.69 degrees
! Estimated noise=32.3366 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0409674 Jy
! Component: 100  -  total flux cleaned = 0.0589882 Jy
! Total flux subtracted in 100 components = 0.0589882 Jy
! Clean residual min=-0.004470 max=0.008722 Jy/beam
! Clean residual mean=-0.000069 rms=0.001413 Jy/beam
! Combined flux in latest and established models = 0.0589882 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0589882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030977Jy  sigma=0.021891
! Fit after  self-cal, rms=0.030886Jy  sigma=0.021827
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105442 Jy
! Component: 100  -  total flux cleaned = 0.0173251 Jy
! Total flux subtracted in 100 components = 0.0173251 Jy
! Clean residual min=-0.003469 max=0.004666 Jy/beam
! Clean residual mean=-0.000040 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.0763133 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 20 components and 0.0763133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025148Jy  sigma=0.017770
! Fit after  self-cal, rms=0.025128Jy  sigma=0.017756
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.498 mas, bmaj=6.516 mas, bpa=40.5 degrees
! Estimated noise=17.6601 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00665655 Jy
! Component: 100  -  total flux cleaned = 0.0106054 Jy
! Component: 150  -  total flux cleaned = 0.0131942 Jy
! Component: 200  -  total flux cleaned = 0.0149197 Jy
! Total flux subtracted in 200 components = 0.0149197 Jy
! Clean residual min=-0.002583 max=0.002498 Jy/beam
! Clean residual mean=-0.000015 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.091233 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 48 components and 0.091233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023187Jy  sigma=0.016384
! Fit after  self-cal, rms=0.023173Jy  sigma=0.016374
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     HN        0.91     KP        0.85     LA        1.05     
!   MK        1.04     NL        1.01     OV        1.01     PT        0.86     
!   SC        0.93     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.13     HN        0.94     KP        0.90     LA        1.10     
!   MK        0.97     NL        1.02     OV        1.09     PT        0.95     
!   SC        1.08     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     HN        0.99     KP        0.93     LA        1.04     
!   MK        1.01     NL        1.09     OV        1.03     PT        0.91     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.15     HN        0.92     KP        0.94     LA        1.28     
!   MK        0.98     NL        0.97     OV        0.99     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.03     KP        0.96     LA        1.04     
!   MK        1.02     NL        0.96     OV        1.00     PT        0.89     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.00     KP        0.99     LA        1.22     
!   MK        1.09     NL        0.94     OV        1.01     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     HN        0.96     KP        0.92     LA        1.01     
!   MK        1.00     NL        0.97     OV        1.06     PT        0.92     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        0.96     KP        0.97     LA        1.02     
!   MK        1.02     NL        0.98     OV        1.07     PT        0.91     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.023173Jy  sigma=0.016374
! Fit after  self-cal, rms=0.021753Jy  sigma=0.015265
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.501 mas, bmaj=6.462 mas, bpa=40.22 degrees
! Estimated noise=17.613 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000456231 Jy
! Component: 100  -  total flux cleaned = 0.000585708 Jy
! Component: 150  -  total flux cleaned = 0.000640982 Jy
! Component: 200  -  total flux cleaned = 0.00064137 Jy
! Total flux subtracted in 200 components = 0.00064137 Jy
! Clean residual min=-0.001545 max=0.001555 Jy/beam
! Clean residual mean=0.000000 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.0918743 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 67 components and 0.0918743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021669Jy  sigma=0.015204
! Fit after  self-cal, rms=0.021686Jy  sigma=0.015196
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021686Jy  sigma=0.015196
! Fit after  self-cal, rms=0.021700Jy  sigma=0.015189
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.499 mas, bmaj=6.459 mas, bpa=40.12 degrees
! Estimated noise=17.6101 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000395663 Jy
! Component: 100  -  total flux cleaned = 0.000556911 Jy
! Component: 150  -  total flux cleaned = 0.000577913 Jy
! Component: 200  -  total flux cleaned = 0.000559638 Jy
! Total flux subtracted in 200 components = 0.000559638 Jy
! Clean residual min=-0.001479 max=0.001390 Jy/beam
! Clean residual mean=0.000000 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.092434 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 72 components and 0.092434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021657Jy  sigma=0.015157
! Fit after  self-cal, rms=0.021656Jy  sigma=0.015156
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.282e-05 Jy
! Component: 100  -  total flux cleaned = -2.23355e-05 Jy
! Component: 150  -  total flux cleaned = -2.21171e-05 Jy
! Component: 200  -  total flux cleaned = -2.20552e-05 Jy
! Total flux subtracted in 200 components = -2.20552e-05 Jy
! Clean residual min=-0.001484 max=0.001313 Jy/beam
! Clean residual mean=0.000000 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.0924119 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 81 components and 0.0924119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021635Jy  sigma=0.015140
! Fit after  self-cal, rms=0.021633Jy  sigma=0.015139
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021633Jy  sigma=0.015139
! Fit after  self-cal, rms=0.021695Jy  sigma=0.015135
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.498 mas, bmaj=6.45 mas, bpa=40.03 degrees
! Estimated noise=17.6357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000427744 Jy
! Component: 100  -  total flux cleaned = 0.00047642 Jy
! Component: 150  -  total flux cleaned = 0.000490558 Jy
! Component: 200  -  total flux cleaned = 0.000503705 Jy
! Total flux subtracted in 200 components = 0.000503705 Jy
! Clean residual min=-0.001472 max=0.001244 Jy/beam
! Clean residual mean=0.000000 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.0929156 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 88 components and 0.0929156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021674Jy  sigma=0.015119
! Fit after  self-cal, rms=0.021673Jy  sigma=0.015118
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.0618e-07 Jy
! Component: 100  -  total flux cleaned = 5.20421e-07 Jy
! Component: 150  -  total flux cleaned = 4.17184e-07 Jy
! Component: 200  -  total flux cleaned = 3.8042e-07 Jy
! Total flux subtracted in 200 components = 3.8042e-07 Jy
! Clean residual min=-0.001462 max=0.001197 Jy/beam
! Clean residual mean=0.000000 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.092916 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 90 components and 0.092916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021660Jy  sigma=0.015109
! Fit after  self-cal, rms=0.021659Jy  sigma=0.015108
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021659Jy  sigma=0.015108
! Fit after  self-cal, rms=0.021690Jy  sigma=0.015106
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.55 mas, bmaj=7.896 mas, bpa=34.44 degrees
! Estimated noise=23.4134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000562265 Jy
! Component: 100  -  total flux cleaned = 0.000653155 Jy
! Component: 150  -  total flux cleaned = 0.000707178 Jy
! Component: 200  -  total flux cleaned = 0.000726857 Jy
! Total flux subtracted in 200 components = 0.000726857 Jy
! Clean residual min=-0.001773 max=0.001451 Jy/beam
! Clean residual mean=0.000002 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.0936429 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 99 components and 0.0936428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021681Jy  sigma=0.015101
! Fit after  self-cal, rms=0.021678Jy  sigma=0.015098
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.40607e-06 Jy
! Component: 100  -  total flux cleaned = -3.60262e-06 Jy
! Component: 150  -  total flux cleaned = 5.59795e-06 Jy
! Component: 200  -  total flux cleaned = 1.46034e-05 Jy
! Total flux subtracted in 200 components = 1.46034e-05 Jy
! Clean residual min=-0.001728 max=0.001425 Jy/beam
! Clean residual mean=0.000002 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.0936574 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 101 components and 0.0936574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021673Jy  sigma=0.015095
! Fit after  self-cal, rms=0.021669Jy  sigma=0.015093
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.498 mas, bmaj=6.441 mas, bpa=39.98 degrees
! Estimated noise=17.6468 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.498 x 6.441 at 39.98 degrees (North through East)
! Clean map  min=-0.0013637  max=0.053107 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.202 mas, bmaj=5.851 mas, bpa=40.28 degrees
! Estimated noise=31.8372 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0400391 Jy
! Component: 100  -  total flux cleaned = 0.0575942 Jy
! Component: 150  -  total flux cleaned = 0.0679307 Jy
! Component: 200  -  total flux cleaned = 0.0746207 Jy
! Total flux subtracted in 200 components = 0.0746207 Jy
! Clean residual min=-0.003121 max=0.004306 Jy/beam
! Clean residual mean=-0.000034 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.0746207 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0746207 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.498 mas, bmaj=6.441 mas, bpa=39.98 degrees
! Estimated noise=17.6468 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00724424 Jy
! Component: 100  -  total flux cleaned = 0.0113448 Jy
! Component: 150  -  total flux cleaned = 0.013943 Jy
! Component: 200  -  total flux cleaned = 0.0156868 Jy
! Total flux subtracted in 200 components = 0.0156868 Jy
! Clean residual min=-0.001748 max=0.001692 Jy/beam
! Clean residual mean=-0.000006 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.0903074 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 55 components and 0.0903074 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.55 mas, bmaj=7.896 mas, bpa=34.44 degrees
! Estimated noise=23.4134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179496 Jy
! Component: 100  -  total flux cleaned = 0.00250303 Jy
! Component: 150  -  total flux cleaned = 0.00264882 Jy
! Component: 200  -  total flux cleaned = 0.00279154 Jy
! Total flux subtracted in 200 components = 0.00279154 Jy
! Clean residual min=-0.001673 max=0.001359 Jy/beam
! Clean residual mean=0.000000 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.0930989 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.92101e-05 Jy
! Component: 100  -  total flux cleaned = 0.000185166 Jy
! Component: 150  -  total flux cleaned = 0.000271573 Jy
! Component: 200  -  total flux cleaned = 0.000336407 Jy
! Total flux subtracted in 200 components = 0.000336407 Jy
! Clean residual min=-0.001669 max=0.001358 Jy/beam
! Clean residual mean=0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.0934354 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 82 components and 0.0934353 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.498 mas, bmaj=6.441 mas, bpa=39.98 degrees
! Estimated noise=17.6468 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014803 Jy
! Component: 100  -  total flux cleaned = -0.000107021 Jy
! Component: 150  -  total flux cleaned = -5.47546e-05 Jy
! Component: 200  -  total flux cleaned = -3.90503e-05 Jy
! Total flux subtracted in 200 components = -3.90503e-05 Jy
! Clean residual min=-0.001422 max=0.001201 Jy/beam
! Clean residual mean=0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.0933963 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 95 components and 0.0933963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021691Jy  sigma=0.015107
! Fit after  self-cal, rms=0.021688Jy  sigma=0.015104
wmodel /scr/pima/bp171a7_uvs/J1316+6927_C_map.mod
! Writing 95 model components to file: /scr/pima/bp171a7_uvs/J1316+6927_C_map.mod
wobs /scr/pima/bp171a7_uvs/J1316+6927_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1316+6927_C_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1316+6927_C_map.win
! wwins: Wrote 1 windows to /scr/pima/bp171a7_uvs/J1316+6927_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000643918 Jy
! Component: 100  -  total flux cleaned = -0.00105915 Jy
! Component: 150  -  total flux cleaned = -0.00120877 Jy
! Component: 200  -  total flux cleaned = -0.00128977 Jy
! Component: 250  -  total flux cleaned = -0.0012515 Jy
! Component: 300  -  total flux cleaned = -0.00125176 Jy
! Component: 350  -  total flux cleaned = -0.00123387 Jy
! Component: 400  -  total flux cleaned = -0.00123388 Jy
! Component: 450  -  total flux cleaned = -0.00120046 Jy
! Component: 500  -  total flux cleaned = -0.00116818 Jy
! Component: 550  -  total flux cleaned = -0.00119938 Jy
! Component: 600  -  total flux cleaned = -0.00121453 Jy
! Component: 650  -  total flux cleaned = -0.00124391 Jy
! Component: 700  -  total flux cleaned = -0.00124394 Jy
! Component: 750  -  total flux cleaned = -0.00127166 Jy
! Component: 800  -  total flux cleaned = -0.00127168 Jy
! Component: 850  -  total flux cleaned = -0.00129837 Jy
! Component: 900  -  total flux cleaned = -0.00128535 Jy
! Component: 950  -  total flux cleaned = -0.00124748 Jy
! Component: 1000  -  total flux cleaned = -0.00118547 Jy
! Component: 1050  -  total flux cleaned = -0.00113709 Jy
! Component: 1100  -  total flux cleaned = -0.00116104 Jy
! Component: 1150  -  total flux cleaned = -0.00116071 Jy
! Component: 1200  -  total flux cleaned = -0.00112593 Jy
! Component: 1250  -  total flux cleaned = -0.00108071 Jy
! Component: 1300  -  total flux cleaned = -0.00110296 Jy
! Component: 1350  -  total flux cleaned = -0.00112469 Jy
! Component: 1400  -  total flux cleaned = -0.00111392 Jy
! Component: 1450  -  total flux cleaned = -0.00118828 Jy
! Component: 1500  -  total flux cleaned = -0.00118811 Jy
! Component: 1550  -  total flux cleaned = -0.00116747 Jy
! Component: 1600  -  total flux cleaned = -0.00117789 Jy
! Component: 1650  -  total flux cleaned = -0.0011981 Jy
! Component: 1700  -  total flux cleaned = -0.00120808 Jy
! Component: 1750  -  total flux cleaned = -0.00120816 Jy
! Component: 1800  -  total flux cleaned = -0.00119865 Jy
! Component: 1850  -  total flux cleaned = -0.00117978 Jy
! Component: 1900  -  total flux cleaned = -0.00117045 Jy
! Component: 1950  -  total flux cleaned = -0.00117047 Jy
! Component: 2000  -  total flux cleaned = -0.00116127 Jy
! Component: 2050  -  total flux cleaned = -0.00111599 Jy
! Component: 2100  -  total flux cleaned = -0.00111594 Jy
! Component: 2150  -  total flux cleaned = -0.00114229 Jy
! Component: 2200  -  total flux cleaned = -0.00111593 Jy
! Component: 2250  -  total flux cleaned = -0.00109855 Jy
! Component: 2300  -  total flux cleaned = -0.00109003 Jy
! Component: 2350  -  total flux cleaned = -0.00109847 Jy
! Component: 2400  -  total flux cleaned = -0.00109861 Jy
! Component: 2450  -  total flux cleaned = -0.00109858 Jy
! Component: 2500  -  total flux cleaned = -0.00110659 Jy
! Component: 2550  -  total flux cleaned = -0.00112259 Jy
! Component: 2600  -  total flux cleaned = -0.00113063 Jy
! Component: 2650  -  total flux cleaned = -0.00114648 Jy
! Component: 2700  -  total flux cleaned = -0.00116996 Jy
! Component: 2750  -  total flux cleaned = -0.00116221 Jy
! Component: 2800  -  total flux cleaned = -0.00120057 Jy
! Component: 2850  -  total flux cleaned = -0.00119292 Jy
! Component: 2900  -  total flux cleaned = -0.00117797 Jy
! Component: 2950  -  total flux cleaned = -0.00118548 Jy
! Component: 3000  -  total flux cleaned = -0.00117805 Jy
! Component: 3050  -  total flux cleaned = -0.00119255 Jy
! Component: 3100  -  total flux cleaned = -0.00116357 Jy
! Component: 3150  -  total flux cleaned = -0.0011492 Jy
! Component: 3200  -  total flux cleaned = -0.00113504 Jy
! Component: 3250  -  total flux cleaned = -0.0011 Jy
! Component: 3300  -  total flux cleaned = -0.001107 Jy
! Component: 3350  -  total flux cleaned = -0.0010793 Jy
! Component: 3400  -  total flux cleaned = -0.00107931 Jy
! Component: 3450  -  total flux cleaned = -0.00106579 Jy
! Component: 3500  -  total flux cleaned = -0.00105239 Jy
! Component: 3550  -  total flux cleaned = -0.00104572 Jy
! Component: 3600  -  total flux cleaned = -0.00104562 Jy
! Component: 3650  -  total flux cleaned = -0.000999487 Jy
! Component: 3700  -  total flux cleaned = -0.00101255 Jy
! Component: 3750  -  total flux cleaned = -0.000993131 Jy
! Component: 3800  -  total flux cleaned = -0.000999527 Jy
! Component: 3850  -  total flux cleaned = -0.000986876 Jy
! Component: 3900  -  total flux cleaned = -0.000980559 Jy
! Component: 3950  -  total flux cleaned = -0.000967995 Jy
! Component: 4000  -  total flux cleaned = -0.000974183 Jy
! Component: 4050  -  total flux cleaned = -0.000968011 Jy
! Total flux subtracted in 4096 components = -0.000961839 Jy
! Clean residual min=-0.000351 max=0.000371 Jy/beam
! Clean residual mean=0.000000 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.0924345 Jy
keep
! Adding 297 model components to the UV plane model.
! The established model now contains 392 components and 0.0924344 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1316+6927_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.498 x 6.441 at 39.98 degrees (North through East)
! Clean map  min=-0.0010735  max=0.053301 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1316+6927_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0533014 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000112214 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.631583 0.631583 1.26317 2.52633 5.05267 10.1053 20.2107 40.4213 80.8427
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.053 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1316+6927_C_uvs.log closed on Sun May 12 14:54:32 2013