! Started logfile: /scr/pima/bp171a7_uvs/J1312-2350_X_uvs.log on Sun May 12 14:04:45 2013
obs /scr/pima/bp171a7_uvs/J1312-2350_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1312-2350_X_uva.fits
! AN table 1: 67 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.561834 visibilities/baseline/integration-bin.
! Found source: J1312-2350
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8432 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1312-2350_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 111 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 111 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 111 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 111 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 111 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 111 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 111 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 111 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001839Jy  sigma=0.680722
! Fit after  self-cal, rms=0.985433Jy  sigma=0.669072
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.68 mas, bmaj=1.964 mas, bpa=4.868 degrees
! Estimated noise=27.2231 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119787 Jy
! Component: 100  -  total flux cleaned = 0.0146547 Jy
! Total flux subtracted in 100 components = 0.0146547 Jy
! Clean residual min=-0.003350 max=0.003097 Jy/beam
! Clean residual mean=-0.000001 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.0146547 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0146547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027373Jy  sigma=0.018541
! Fit after  self-cal, rms=0.025126Jy  sigma=0.017008
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00374833 Jy
! Component: 100  -  total flux cleaned = 0.0049065 Jy
! Total flux subtracted in 100 components = 0.0049065 Jy
! Clean residual min=-0.002629 max=0.002505 Jy/beam
! Clean residual mean=-0.000001 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.0195612 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 7 components and 0.0195612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024733Jy  sigma=0.016723
! Fit after  self-cal, rms=0.024732Jy  sigma=0.016717
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.872 mas, bmaj=2.395 mas, bpa=3.996 degrees
! Estimated noise=11.5691 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000414049 Jy
! Component: 100  -  total flux cleaned = -0.000463206 Jy
! Component: 150  -  total flux cleaned = -0.000485718 Jy
! Component: 200  -  total flux cleaned = -0.000496239 Jy
! Total flux subtracted in 200 components = -0.000496239 Jy
! Clean residual min=-0.001971 max=0.001741 Jy/beam
! Clean residual mean=-0.000003 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.019065 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.019065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024720Jy  sigma=0.016708
! Fit after  self-cal, rms=0.024715Jy  sigma=0.016707
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.19     HN        0.58     KP        0.91     LA        0.97     
!   MK        1.10     OV        0.93     PT        0.94     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.27     HN        0.51     KP        1.06     LA        0.88     
!   MK        1.13     OV        0.99     PT        1.06     SC        0.85     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.25     HN        0.65     KP        1.22     LA        0.91     
!   MK        1.20     OV        0.95     PT        1.03     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.31     HN        0.55     KP        1.15     LA        0.95     
!   MK        1.14     OV        0.91     PT        1.02     SC        0.94     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.35     HN        0.54     KP        1.21     LA        0.93     
!   MK        0.98     OV        0.87     PT        0.91     SC        0.94     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     HN        0.56     KP        1.15     LA        0.99     
!   MK        1.09     OV        1.02     PT        0.95     SC        0.90     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.17     HN        0.54     KP        1.12     LA        0.95     
!   MK        1.15     OV        1.00     PT        0.88     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.18     HN        0.58     KP        1.47     LA        1.00     
!   MK        1.00     OV        0.96     PT        0.85     SC        1.13     
! 
! 
! Fit before self-cal, rms=0.024715Jy  sigma=0.016707
! Fit after  self-cal, rms=0.025125Jy  sigma=0.016408
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8788 mas, bmaj=2.422 mas, bpa=4.459 degrees
! Estimated noise=11.5424 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00017919 Jy
! Component: 100  -  total flux cleaned = -0.000146191 Jy
! Component: 150  -  total flux cleaned = -0.000115768 Jy
! Component: 200  -  total flux cleaned = -8.78057e-05 Jy
! Total flux subtracted in 200 components = -8.78057e-05 Jy
! Clean residual min=-0.000849 max=0.000785 Jy/beam
! Clean residual mean=-0.000000 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.0189772 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.0189772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025103Jy  sigma=0.016398
! Fit after  self-cal, rms=0.025291Jy  sigma=0.016328
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025291Jy  sigma=0.016328
! Fit after  self-cal, rms=0.025882Jy  sigma=0.016312
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8763 mas, bmaj=2.424 mas, bpa=4.635 degrees
! Estimated noise=11.5355 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000138553 Jy
! Component: 100  -  total flux cleaned = -0.000123318 Jy
! Component: 150  -  total flux cleaned = -9.75678e-05 Jy
! Component: 200  -  total flux cleaned = -7.25441e-05 Jy
! Total flux subtracted in 200 components = -7.25441e-05 Jy
! Clean residual min=-0.000739 max=0.000748 Jy/beam
! Clean residual mean=-0.000001 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0189047 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 22 components and 0.0189047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025865Jy  sigma=0.016304
! Fit after  self-cal, rms=0.025940Jy  sigma=0.016298
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000137736 Jy
! Component: 100  -  total flux cleaned = -0.000114093 Jy
! Component: 150  -  total flux cleaned = -0.000103027 Jy
! Component: 200  -  total flux cleaned = -8.21128e-05 Jy
! Total flux subtracted in 200 components = -8.21128e-05 Jy
! Clean residual min=-0.000784 max=0.000725 Jy/beam
! Clean residual mean=-0.000001 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0188225 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 22 components and 0.0188225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025927Jy  sigma=0.016294
! Fit after  self-cal, rms=0.025912Jy  sigma=0.016287
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025912Jy  sigma=0.016287
! Fit after  self-cal, rms=0.026958Jy  sigma=0.016238
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8844 mas, bmaj=2.397 mas, bpa=4.761 degrees
! Estimated noise=11.5289 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.91516e-05 Jy
! Component: 100  -  total flux cleaned = 4.39423e-05 Jy
! Component: 150  -  total flux cleaned = 5.05863e-05 Jy
! Component: 200  -  total flux cleaned = 5.37615e-05 Jy
! Total flux subtracted in 200 components = 5.37615e-05 Jy
! Clean residual min=-0.000603 max=0.000601 Jy/beam
! Clean residual mean=-0.000001 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.0188763 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 29 components and 0.0188763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026956Jy  sigma=0.016238
! Fit after  self-cal, rms=0.027041Jy  sigma=0.016221
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.94009e-05 Jy
! Component: 100  -  total flux cleaned = -0.000114109 Jy
! Component: 150  -  total flux cleaned = -0.000122233 Jy
! Component: 200  -  total flux cleaned = -0.000122336 Jy
! Total flux subtracted in 200 components = -0.000122336 Jy
! Clean residual min=-0.000609 max=0.000641 Jy/beam
! Clean residual mean=-0.000001 rms=0.000160 Jy/beam
! Combined flux in latest and established models = 0.018754 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 30 components and 0.018754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027039Jy  sigma=0.016220
! Fit after  self-cal, rms=0.027028Jy  sigma=0.016213
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027028Jy  sigma=0.016213
! Fit after  self-cal, rms=0.027369Jy  sigma=0.016209
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.297 mas, bmaj=7.022 mas, bpa=1.305 degrees
! Estimated noise=15.8054 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.00924e-05 Jy
! Component: 100  -  total flux cleaned = 2.03362e-05 Jy
! Component: 150  -  total flux cleaned = 2.04942e-05 Jy
! Component: 200  -  total flux cleaned = 2.25742e-05 Jy
! Total flux subtracted in 200 components = 2.25742e-05 Jy
! Clean residual min=-0.000668 max=0.000627 Jy/beam
! Clean residual mean=-0.000002 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0187765 Jy
selfcal
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 31 components and 0.0187765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027370Jy  sigma=0.016209
! Fit after  self-cal, rms=0.027402Jy  sigma=0.016205
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.73797e-05 Jy
! Component: 100  -  total flux cleaned = -8.69315e-05 Jy
! Component: 150  -  total flux cleaned = -8.67241e-05 Jy
! Component: 200  -  total flux cleaned = -8.65981e-05 Jy
! Total flux subtracted in 200 components = -8.65981e-05 Jy
! Clean residual min=-0.000651 max=0.000637 Jy/beam
! Clean residual mean=-0.000001 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.0186899 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 31 components and 0.0186899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027403Jy  sigma=0.016206
! Fit after  self-cal, rms=0.027399Jy  sigma=0.016205
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8842 mas, bmaj=2.393 mas, bpa=4.77 degrees
! Estimated noise=11.5075 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8842 x 2.393 at 4.77 degrees (North through East)
! Clean map  min=-0.00057638  max=0.01856 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7038 mas, bmaj=1.959 mas, bpa=5.717 degrees
! Estimated noise=27.2663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147275 Jy
! Component: 100  -  total flux cleaned = 0.0174004 Jy
! Component: 150  -  total flux cleaned = 0.0177608 Jy
! Component: 200  -  total flux cleaned = 0.0179313 Jy
! Total flux subtracted in 200 components = 0.0179313 Jy
! Clean residual min=-0.001759 max=0.001550 Jy/beam
! Clean residual mean=-0.000000 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.0179313 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0179313 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8842 mas, bmaj=2.393 mas, bpa=4.77 degrees
! Estimated noise=11.5075 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000358626 Jy
! Component: 100  -  total flux cleaned = 0.000398092 Jy
! Component: 150  -  total flux cleaned = 0.0004137 Jy
! Component: 200  -  total flux cleaned = 0.000441003 Jy
! Total flux subtracted in 200 components = 0.000441003 Jy
! Clean residual min=-0.000770 max=0.000758 Jy/beam
! Clean residual mean=-0.000001 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0183723 Jy
! Adding 9 model components to the UV plane model.
! The established model now contains 18 components and 0.0183723 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.297 mas, bmaj=7.022 mas, bpa=1.305 degrees
! Estimated noise=15.8054 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00024156 Jy
! Component: 100  -  total flux cleaned = 0.000246023 Jy
! Component: 150  -  total flux cleaned = 0.000250301 Jy
! Component: 200  -  total flux cleaned = 0.000254263 Jy
! Total flux subtracted in 200 components = 0.000254263 Jy
! Clean residual min=-0.000670 max=0.000704 Jy/beam
! Clean residual mean=-0.000001 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.0186265 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.82192e-06 Jy
! Component: 100  -  total flux cleaned = 9.84082e-06 Jy
! Component: 150  -  total flux cleaned = 1.26777e-05 Jy
! Component: 200  -  total flux cleaned = 1.5287e-05 Jy
! Total flux subtracted in 200 components = 1.5287e-05 Jy
! Clean residual min=-0.000666 max=0.000692 Jy/beam
! Clean residual mean=-0.000001 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.0186418 Jy
! Adding 6 model components to the UV plane model.
! The established model now contains 22 components and 0.0186418 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8842 mas, bmaj=2.393 mas, bpa=4.77 degrees
! Estimated noise=11.5075 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.22091e-05 Jy
! Component: 100  -  total flux cleaned = -8.33192e-05 Jy
! Component: 150  -  total flux cleaned = -6.72635e-05 Jy
! Component: 200  -  total flux cleaned = -4.47911e-05 Jy
! Total flux subtracted in 200 components = -4.47911e-05 Jy
! Clean residual min=-0.000675 max=0.000683 Jy/beam
! Clean residual mean=-0.000001 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.018597 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 31 components and 0.018597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027408Jy  sigma=0.016210
! Fit after  self-cal, rms=0.027402Jy  sigma=0.016209
wmodel /scr/pima/bp171a7_uvs/J1312-2350_X_map.mod
! Writing 31 model components to file: /scr/pima/bp171a7_uvs/J1312-2350_X_map.mod
wobs /scr/pima/bp171a7_uvs/J1312-2350_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1312-2350_X_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1312-2350_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bp171a7_uvs/J1312-2350_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -1.55893e-06 Jy
! Component: 100  -  total flux cleaned = 4.33829e-05 Jy
! Component: 150  -  total flux cleaned = 2.30329e-05 Jy
! Component: 200  -  total flux cleaned = 3.50991e-06 Jy
! Component: 250  -  total flux cleaned = 3.72213e-06 Jy
! Component: 300  -  total flux cleaned = 1.31587e-05 Jy
! Component: 350  -  total flux cleaned = 4.85291e-05 Jy
! Component: 400  -  total flux cleaned = 6.5789e-05 Jy
! Component: 450  -  total flux cleaned = 9.03812e-05 Jy
! Component: 500  -  total flux cleaned = 7.39763e-05 Jy
! Component: 550  -  total flux cleaned = 8.15721e-05 Jy
! Component: 600  -  total flux cleaned = 8.15438e-05 Jy
! Component: 650  -  total flux cleaned = 8.16783e-05 Jy
! Component: 700  -  total flux cleaned = 8.87915e-05 Jy
! Component: 750  -  total flux cleaned = 8.88617e-05 Jy
! Component: 800  -  total flux cleaned = 8.89037e-05 Jy
! Component: 850  -  total flux cleaned = 8.89204e-05 Jy
! Component: 900  -  total flux cleaned = 8.20741e-05 Jy
! Component: 950  -  total flux cleaned = 6.86851e-05 Jy
! Component: 1000  -  total flux cleaned = 6.86695e-05 Jy
! Component: 1050  -  total flux cleaned = 7.50753e-05 Jy
! Component: 1100  -  total flux cleaned = 7.50434e-05 Jy
! Component: 1150  -  total flux cleaned = 7.50756e-05 Jy
! Component: 1200  -  total flux cleaned = 7.49919e-05 Jy
! Component: 1250  -  total flux cleaned = 5.69836e-05 Jy
! Component: 1300  -  total flux cleaned = 4.51253e-05 Jy
! Component: 1350  -  total flux cleaned = 3.33908e-05 Jy
! Component: 1400  -  total flux cleaned = 1.02409e-05 Jy
! Component: 1450  -  total flux cleaned = -1.26306e-05 Jy
! Component: 1500  -  total flux cleaned = -2.95933e-05 Jy
! Component: 1550  -  total flux cleaned = -5.19835e-05 Jy
! Component: 1600  -  total flux cleaned = -8.50738e-05 Jy
! Component: 1650  -  total flux cleaned = -9.60399e-05 Jy
! Component: 1700  -  total flux cleaned = -0.000123036 Jy
! Component: 1750  -  total flux cleaned = -0.000165648 Jy
! Component: 1800  -  total flux cleaned = -0.00019726 Jy
! Component: 1850  -  total flux cleaned = -0.000228602 Jy
! Component: 1900  -  total flux cleaned = -0.000254368 Jy
! Component: 1950  -  total flux cleaned = -0.000274806 Jy
! Component: 2000  -  total flux cleaned = -0.000310279 Jy
! Component: 2050  -  total flux cleaned = -0.00033532 Jy
! Component: 2100  -  total flux cleaned = -0.000360208 Jy
! Component: 2150  -  total flux cleaned = -0.000375069 Jy
! Component: 2200  -  total flux cleaned = -0.000384896 Jy
! Component: 2250  -  total flux cleaned = -0.000414125 Jy
! Component: 2300  -  total flux cleaned = -0.000438227 Jy
! Component: 2350  -  total flux cleaned = -0.00045256 Jy
! Component: 2400  -  total flux cleaned = -0.000485797 Jy
! Component: 2450  -  total flux cleaned = -0.00051879 Jy
! Component: 2500  -  total flux cleaned = -0.000528149 Jy
! Component: 2550  -  total flux cleaned = -0.000565354 Jy
! Component: 2600  -  total flux cleaned = -0.00058379 Jy
! Component: 2650  -  total flux cleaned = -0.000597534 Jy
! Component: 2700  -  total flux cleaned = -0.000615755 Jy
! Component: 2750  -  total flux cleaned = -0.000642905 Jy
! Component: 2800  -  total flux cleaned = -0.000651901 Jy
! Component: 2850  -  total flux cleaned = -0.000674225 Jy
! Component: 2900  -  total flux cleaned = -0.000687508 Jy
! Component: 2950  -  total flux cleaned = -0.000705119 Jy
! Component: 3000  -  total flux cleaned = -0.000718222 Jy
! Component: 3050  -  total flux cleaned = -0.000744329 Jy
! Component: 3100  -  total flux cleaned = -0.000757279 Jy
! Component: 3150  -  total flux cleaned = -0.000774471 Jy
! Component: 3200  -  total flux cleaned = -0.000791581 Jy
! Component: 3250  -  total flux cleaned = -0.000817099 Jy
! Component: 3300  -  total flux cleaned = -0.000846651 Jy
! Component: 3350  -  total flux cleaned = -0.00086341 Jy
! Component: 3400  -  total flux cleaned = -0.000876005 Jy
! Component: 3450  -  total flux cleaned = -0.000905111 Jy
! Component: 3500  -  total flux cleaned = -0.000909262 Jy
! Component: 3550  -  total flux cleaned = -0.000933953 Jy
! Component: 3600  -  total flux cleaned = -0.000966687 Jy
! Component: 3650  -  total flux cleaned = -0.000978891 Jy
! Component: 3700  -  total flux cleaned = -0.000999154 Jy
! Component: 3750  -  total flux cleaned = -0.00101532 Jy
! Component: 3800  -  total flux cleaned = -0.00103942 Jy
! Component: 3850  -  total flux cleaned = -0.00106337 Jy
! Component: 3900  -  total flux cleaned = -0.00106733 Jy
! Component: 3950  -  total flux cleaned = -0.00107527 Jy
! Component: 4000  -  total flux cleaned = -0.0011029 Jy
! Component: 4050  -  total flux cleaned = -0.00111075 Jy
! Total flux subtracted in 4096 components = -0.00112645 Jy
! Clean residual min=-0.000206 max=0.000233 Jy/beam
! Clean residual mean=-0.000000 rms=0.000065 Jy/beam
! Combined flux in latest and established models = 0.0174706 Jy
keep
! Adding 233 model components to the UV plane model.
! The established model now contains 264 components and 0.0174706 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1312-2350_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8842 x 2.393 at 4.77 degrees (North through East)
! Clean map  min=-0.00059078  max=0.018351 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1312-2350_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0183509 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 6.41912e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.0494 1.0494 2.09879 4.19758 8.39516 16.7903 33.5807 67.1613
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.018 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1312-2350_X_uvs.log closed on Sun May 12 14:04:50 2013