! Started logfile: /scr/pima/bp171a7_uvs/J1312-2350_C_uvs.log on Sun May 12 14:54:18 2013
obs /scr/pima/bp171a7_uvs/J1312-2350_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1312-2350_C_uva.fits
! AN table 1: 67 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.747927 visibilities/baseline/integration-bin.
! Found source: J1312-2350
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 14432 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1312-2350_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001231Jy  sigma=0.682124
! Fit after  self-cal, rms=0.986230Jy  sigma=0.671947
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=3.367 mas, bpa=-0.7235 degrees
! Estimated noise=18.4584 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111928 Jy
! Component: 100  -  total flux cleaned = 0.0138868 Jy
! Total flux subtracted in 100 components = 0.0138868 Jy
! Clean residual min=-0.002878 max=0.002032 Jy/beam
! Clean residual mean=0.000002 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.0138868 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0138868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029771Jy  sigma=0.020362
! Fit after  self-cal, rms=0.027891Jy  sigma=0.019069
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00393763 Jy
! Component: 100  -  total flux cleaned = 0.00554839 Jy
! Total flux subtracted in 100 components = 0.00554839 Jy
! Clean residual min=-0.002705 max=0.001853 Jy/beam
! Clean residual mean=0.000001 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.0194352 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 16 components and 0.0194352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027446Jy  sigma=0.018745
! Fit after  self-cal, rms=0.027442Jy  sigma=0.018736
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.543 mas, bmaj=4.213 mas, bpa=-1.001 degrees
! Estimated noise=8.67705 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000353143 Jy
! Component: 100  -  total flux cleaned = -0.000383839 Jy
! Component: 150  -  total flux cleaned = -0.000383248 Jy
! Component: 200  -  total flux cleaned = -0.000383692 Jy
! Total flux subtracted in 200 components = -0.000383692 Jy
! Clean residual min=-0.002355 max=0.001342 Jy/beam
! Clean residual mean=0.000004 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.0190515 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 19 components and 0.0190515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027395Jy  sigma=0.018696
! Fit after  self-cal, rms=0.027390Jy  sigma=0.018691
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.18     HN        0.58     KP        0.90     LA        1.02     
!   MK        1.13     NL        0.72     OV        0.97     PT        0.91     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.35     HN        0.63     KP        0.90     LA        1.23     
!   MK        1.11     NL        0.74     OV        1.01     PT        1.02     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.38     HN        0.72     KP        0.97     LA        1.12     
!   MK        1.06     NL        0.74     OV        1.00     PT        1.14     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.34     HN        0.65     KP        1.14     LA        1.05     
!   MK        1.12     NL        0.71     OV        1.08     PT        1.17     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.26     HN        0.69     KP        1.14     LA        1.25     
!   MK        1.24     NL        0.70     OV        0.96     PT        0.91     
!   SC        1.05     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.18     HN        0.72     KP        1.13     LA        1.32     
!   MK        1.20     NL        0.75     OV        1.05     PT        1.11     
!   SC        1.09     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.22     HN        0.65     KP        1.15     LA        1.17     
!   MK        0.90     NL        0.68     OV        1.06     PT        1.20     
!   SC        0.95     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.21     HN        0.68     KP        1.12     LA        1.19     
!   MK        1.09     NL        0.58     OV        0.99     PT        1.04     
!   SC        0.91     
! 
! 
! Fit before self-cal, rms=0.027390Jy  sigma=0.018691
! Fit after  self-cal, rms=0.027122Jy  sigma=0.018344
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.55 mas, bmaj=4.207 mas, bpa=-1.358 degrees
! Estimated noise=8.56625 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187759 Jy
! Component: 100  -  total flux cleaned = 0.000212764 Jy
! Component: 150  -  total flux cleaned = 0.000247203 Jy
! Component: 200  -  total flux cleaned = 0.000268875 Jy
! Total flux subtracted in 200 components = 0.000268875 Jy
! Clean residual min=-0.000951 max=0.000977 Jy/beam
! Clean residual mean=0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0193203 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 28 components and 0.0193203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027111Jy  sigma=0.018337
! Fit after  self-cal, rms=0.027554Jy  sigma=0.018194
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027554Jy  sigma=0.018194
! Fit after  self-cal, rms=0.029700Jy  sigma=0.018145
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.543 mas, bmaj=4.211 mas, bpa=-2.461 degrees
! Estimated noise=8.69509 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000234733 Jy
! Component: 100  -  total flux cleaned = 0.000259369 Jy
! Component: 150  -  total flux cleaned = 0.000292877 Jy
! Component: 200  -  total flux cleaned = 0.000312896 Jy
! Total flux subtracted in 200 components = 0.000312896 Jy
! Clean residual min=-0.000931 max=0.000936 Jy/beam
! Clean residual mean=0.000001 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0196332 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 35 components and 0.0196332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029689Jy  sigma=0.018137
! Fit after  self-cal, rms=0.030028Jy  sigma=0.018104
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000212768 Jy
! Component: 100  -  total flux cleaned = -0.000238141 Jy
! Component: 150  -  total flux cleaned = -0.000218406 Jy
! Component: 200  -  total flux cleaned = -0.000199868 Jy
! Total flux subtracted in 200 components = -0.000199868 Jy
! Clean residual min=-0.000961 max=0.000885 Jy/beam
! Clean residual mean=0.000001 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.0194334 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 40 components and 0.0194334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030017Jy  sigma=0.018099
! Fit after  self-cal, rms=0.030029Jy  sigma=0.018095
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030029Jy  sigma=0.018095
! Fit after  self-cal, rms=0.032611Jy  sigma=0.017956
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.559 mas, bmaj=4.185 mas, bpa=-3.455 degrees
! Estimated noise=8.77471 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000207953 Jy
! Component: 100  -  total flux cleaned = 0.000257212 Jy
! Component: 150  -  total flux cleaned = 0.000283141 Jy
! Component: 200  -  total flux cleaned = 0.000294392 Jy
! Total flux subtracted in 200 components = 0.000294392 Jy
! Clean residual min=-0.000646 max=0.000670 Jy/beam
! Clean residual mean=0.000001 rms=0.000160 Jy/beam
! Combined flux in latest and established models = 0.0197278 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 48 components and 0.0197278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032605Jy  sigma=0.017954
! Fit after  self-cal, rms=0.032919Jy  sigma=0.017914
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12.9, 42.9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000681619 Jy
! Component: 100  -  total flux cleaned = 0.000832681 Jy
! Component: 150  -  total flux cleaned = 0.0008441 Jy
! Component: 200  -  total flux cleaned = 0.000864385 Jy
! Total flux subtracted in 200 components = 0.000864385 Jy
! Clean residual min=-0.000636 max=0.000605 Jy/beam
! Clean residual mean=0.000001 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.0205921 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 63 components and 0.0205921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032899Jy  sigma=0.017902
! Fit after  self-cal, rms=0.032915Jy  sigma=0.017897
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032915Jy  sigma=0.017897
! Fit after  self-cal, rms=0.035262Jy  sigma=0.017883
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.427 mas, bmaj=7.748 mas, bpa=0.2416 degrees
! Estimated noise=11.9762 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000476508 Jy
! Component: 100  -  total flux cleaned = 0.000697342 Jy
! Component: 150  -  total flux cleaned = 0.00072905 Jy
! Component: 200  -  total flux cleaned = 0.000749978 Jy
! Total flux subtracted in 200 components = 0.000749978 Jy
! Clean residual min=-0.000717 max=0.000685 Jy/beam
! Clean residual mean=0.000002 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.0213421 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 85 components and 0.0213421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035255Jy  sigma=0.017880
! Fit after  self-cal, rms=0.035457Jy  sigma=0.017869
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.13539e-06 Jy
! Component: 100  -  total flux cleaned = 1.92075e-05 Jy
! Component: 150  -  total flux cleaned = 2.52389e-05 Jy
! Component: 200  -  total flux cleaned = 3.06473e-05 Jy
! Total flux subtracted in 200 components = 3.06473e-05 Jy
! Clean residual min=-0.000637 max=0.000694 Jy/beam
! Clean residual mean=0.000002 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.0213728 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 93 components and 0.0213728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035456Jy  sigma=0.017868
! Fit after  self-cal, rms=0.035454Jy  sigma=0.017867
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.563 mas, bmaj=4.21 mas, bpa=-3.985 degrees
! Estimated noise=8.83967 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.563 x 4.21 at -3.985 degrees (North through East)
! Clean map  min=-0.00063403  max=0.017342 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.19 mas, bmaj=3.419 mas, bpa=-4.335 degrees
! Estimated noise=18.4062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.01329 Jy
! Component: 100  -  total flux cleaned = 0.0166119 Jy
! Component: 150  -  total flux cleaned = 0.0182836 Jy
! Component: 200  -  total flux cleaned = 0.0194861 Jy
! Total flux subtracted in 200 components = 0.0194861 Jy
! Clean residual min=-0.001330 max=0.001174 Jy/beam
! Clean residual mean=0.000001 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.0194861 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0194861 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.563 mas, bmaj=4.21 mas, bpa=-3.985 degrees
! Estimated noise=8.83967 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106183 Jy
! Component: 100  -  total flux cleaned = 0.00167449 Jy
! Component: 150  -  total flux cleaned = 0.00198728 Jy
! Component: 200  -  total flux cleaned = 0.00213317 Jy
! Total flux subtracted in 200 components = 0.00213317 Jy
! Clean residual min=-0.000716 max=0.000715 Jy/beam
! Clean residual mean=0.000001 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.0216192 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 32 components and 0.0216192 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.427 mas, bmaj=7.748 mas, bpa=0.2416 degrees
! Estimated noise=11.9762 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.7446e-05 Jy
! Component: 100  -  total flux cleaned = -5.0306e-05 Jy
! Component: 150  -  total flux cleaned = -7.01256e-05 Jy
! Component: 200  -  total flux cleaned = -7.95551e-05 Jy
! Total flux subtracted in 200 components = -7.95551e-05 Jy
! Clean residual min=-0.000684 max=0.000789 Jy/beam
! Clean residual mean=0.000002 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.0215397 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.7125e-06 Jy
! Component: 100  -  total flux cleaned = -1.54426e-05 Jy
! Component: 150  -  total flux cleaned = -2.29014e-05 Jy
! Component: 200  -  total flux cleaned = -2.95577e-05 Jy
! Total flux subtracted in 200 components = -2.95577e-05 Jy
! Clean residual min=-0.000669 max=0.000744 Jy/beam
! Clean residual mean=0.000002 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.0215101 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 44 components and 0.0215101 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.563 mas, bmaj=4.21 mas, bpa=-3.985 degrees
! Estimated noise=8.83967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105258 Jy
! Component: 100  -  total flux cleaned = 0.000159592 Jy
! Component: 150  -  total flux cleaned = 0.000168995 Jy
! Component: 200  -  total flux cleaned = 0.000160531 Jy
! Total flux subtracted in 200 components = 0.000160531 Jy
! Clean residual min=-0.000665 max=0.000627 Jy/beam
! Clean residual mean=0.000001 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.0216706 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 52 components and 0.0216706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035457Jy  sigma=0.017870
! Fit after  self-cal, rms=0.035431Jy  sigma=0.017867
wmodel /scr/pima/bp171a7_uvs/J1312-2350_C_map.mod
! Writing 52 model components to file: /scr/pima/bp171a7_uvs/J1312-2350_C_map.mod
wobs /scr/pima/bp171a7_uvs/J1312-2350_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1312-2350_C_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1312-2350_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a7_uvs/J1312-2350_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000207237 Jy
! Component: 100  -  total flux cleaned = -0.000351552 Jy
! Component: 150  -  total flux cleaned = -0.000499863 Jy
! Component: 200  -  total flux cleaned = -0.00066208 Jy
! Component: 250  -  total flux cleaned = -0.000769443 Jy
! Component: 300  -  total flux cleaned = -0.00080741 Jy
! Component: 350  -  total flux cleaned = -0.000853455 Jy
! Component: 400  -  total flux cleaned = -0.000898386 Jy
! Component: 450  -  total flux cleaned = -0.000942291 Jy
! Component: 500  -  total flux cleaned = -0.00098524 Jy
! Component: 550  -  total flux cleaned = -0.00102738 Jy
! Component: 600  -  total flux cleaned = -0.00106887 Jy
! Component: 650  -  total flux cleaned = -0.00112553 Jy
! Component: 700  -  total flux cleaned = -0.00118133 Jy
! Component: 750  -  total flux cleaned = -0.00118923 Jy
! Component: 800  -  total flux cleaned = -0.00121253 Jy
! Component: 850  -  total flux cleaned = -0.00122786 Jy
! Component: 900  -  total flux cleaned = -0.00125046 Jy
! Component: 950  -  total flux cleaned = -0.00128013 Jy
! Component: 1000  -  total flux cleaned = -0.00131666 Jy
! Component: 1050  -  total flux cleaned = -0.00132391 Jy
! Component: 1100  -  total flux cleaned = -0.00135962 Jy
! Component: 1150  -  total flux cleaned = -0.00138789 Jy
! Component: 1200  -  total flux cleaned = -0.00140183 Jy
! Component: 1250  -  total flux cleaned = -0.0014431 Jy
! Component: 1300  -  total flux cleaned = -0.00145666 Jy
! Component: 1350  -  total flux cleaned = -0.00150369 Jy
! Component: 1400  -  total flux cleaned = -0.00153692 Jy
! Component: 1450  -  total flux cleaned = -0.0015829 Jy
! Component: 1500  -  total flux cleaned = -0.00161541 Jy
! Component: 1550  -  total flux cleaned = -0.00164767 Jy
! Component: 1600  -  total flux cleaned = -0.00165412 Jy
! Component: 1650  -  total flux cleaned = -0.00169203 Jy
! Component: 1700  -  total flux cleaned = -0.00173576 Jy
! Component: 1750  -  total flux cleaned = -0.00175426 Jy
! Component: 1800  -  total flux cleaned = -0.00180333 Jy
! Component: 1850  -  total flux cleaned = -0.00182768 Jy
! Component: 1900  -  total flux cleaned = -0.00186382 Jy
! Component: 1950  -  total flux cleaned = -0.00190565 Jy
! Component: 2000  -  total flux cleaned = -0.00193528 Jy
! Component: 2050  -  total flux cleaned = -0.00196463 Jy
! Component: 2100  -  total flux cleaned = -0.00198214 Jy
! Component: 2150  -  total flux cleaned = -0.00201115 Jy
! Component: 2200  -  total flux cleaned = -0.00203995 Jy
! Component: 2250  -  total flux cleaned = -0.00206279 Jy
! Component: 2300  -  total flux cleaned = -0.00211372 Jy
! Component: 2350  -  total flux cleaned = -0.00212495 Jy
! Component: 2400  -  total flux cleaned = -0.00215278 Jy
! Component: 2450  -  total flux cleaned = -0.00218595 Jy
! Component: 2500  -  total flux cleaned = -0.00219145 Jy
! Component: 2550  -  total flux cleaned = -0.00222966 Jy
! Component: 2600  -  total flux cleaned = -0.00224592 Jy
! Component: 2650  -  total flux cleaned = -0.00226218 Jy
! Component: 2700  -  total flux cleaned = -0.00229959 Jy
! Component: 2750  -  total flux cleaned = -0.00232623 Jy
! Component: 2800  -  total flux cleaned = -0.00236323 Jy
! Component: 2850  -  total flux cleaned = -0.00236851 Jy
! Component: 2900  -  total flux cleaned = -0.00240501 Jy
! Component: 2950  -  total flux cleaned = -0.00243609 Jy
! Component: 3000  -  total flux cleaned = -0.00245153 Jy
! Component: 3050  -  total flux cleaned = -0.00249242 Jy
! Component: 3100  -  total flux cleaned = -0.00250768 Jy
! Component: 3150  -  total flux cleaned = -0.00252783 Jy
! Component: 3200  -  total flux cleaned = -0.00252785 Jy
! Component: 3250  -  total flux cleaned = -0.00257765 Jy
! Component: 3300  -  total flux cleaned = -0.00256774 Jy
! Component: 3350  -  total flux cleaned = -0.00259724 Jy
! Component: 3400  -  total flux cleaned = -0.00260215 Jy
! Component: 3450  -  total flux cleaned = -0.00263128 Jy
! Component: 3500  -  total flux cleaned = -0.00265538 Jy
! Component: 3550  -  total flux cleaned = -0.00265058 Jy
! Component: 3600  -  total flux cleaned = -0.00266966 Jy
! Component: 3650  -  total flux cleaned = -0.00269338 Jy
! Component: 3700  -  total flux cleaned = -0.00272631 Jy
! Component: 3750  -  total flux cleaned = -0.00272163 Jy
! Component: 3800  -  total flux cleaned = -0.00273098 Jy
! Component: 3850  -  total flux cleaned = -0.00274029 Jy
! Component: 3900  -  total flux cleaned = -0.00275414 Jy
! Component: 3950  -  total flux cleaned = -0.00278157 Jy
! Component: 4000  -  total flux cleaned = -0.00278607 Jy
! Component: 4050  -  total flux cleaned = -0.00279966 Jy
! Total flux subtracted in 4096 components = -0.00280415 Jy
! Clean residual min=-0.000267 max=0.000275 Jy/beam
! Clean residual mean=0.000000 rms=0.000080 Jy/beam
! Combined flux in latest and established models = 0.0188665 Jy
keep
! Adding 283 model components to the UV plane model.
! The established model now contains 335 components and 0.0188665 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1312-2350_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.563 x 4.21 at -3.985 degrees (North through East)
! Clean map  min=-0.00054572  max=0.017186 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1312-2350_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0171862 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.98239e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.3934 1.3934 2.7868 5.57359 11.1472 22.2944 44.5887 89.1775
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.017 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1312-2350_C_uvs.log closed on Sun May 12 14:54:22 2013