! Started logfile: /scr/pima/bp171a7_uvs/J1302+5748_C_uvs.log on Sun May 12 14:54:08 2013
obs /scr/pima/bp171a7_uvs/J1302+5748_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1302+5748_C_uva.fits
! AN table 1: 20 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.795833 visibilities/baseline/integration-bin.
! Found source: J1302+5748
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4584 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1302+5748_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.056038Jy  sigma=0.746425
! Fit after  self-cal, rms=0.619710Jy  sigma=0.438032
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.214 mas, bmaj=4.438 mas, bpa=23.16 degrees
! Estimated noise=22.024 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.293657 Jy
! Component: 100  -  total flux cleaned = 0.357694 Jy
! Total flux subtracted in 100 components = 0.357694 Jy
! Clean residual min=-0.006780 max=0.017861 Jy/beam
! Clean residual mean=-0.000052 rms=0.001859 Jy/beam
! Combined flux in latest and established models = 0.357694 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.357694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046795Jy  sigma=0.033071
! Fit after  self-cal, rms=0.046792Jy  sigma=0.033069
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178981 Jy
! Component: 100  -  total flux cleaned = 0.0270581 Jy
! Total flux subtracted in 100 components = 0.0270581 Jy
! Clean residual min=-0.007572 max=0.007762 Jy/beam
! Clean residual mean=-0.000040 rms=0.001451 Jy/beam
! Combined flux in latest and established models = 0.384752 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.384752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038124Jy  sigma=0.026940
! Fit after  self-cal, rms=0.038123Jy  sigma=0.026939
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.522 mas, bmaj=4.843 mas, bpa=21.83 degrees
! Estimated noise=14.7884 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00560021 Jy
! Component: 100  -  total flux cleaned = 0.00616166 Jy
! Component: 150  -  total flux cleaned = 0.00677368 Jy
! Component: 200  -  total flux cleaned = 0.0072697 Jy
! Total flux subtracted in 200 components = 0.0072697 Jy
! Clean residual min=-0.006621 max=0.006001 Jy/beam
! Clean residual mean=-0.000051 rms=0.001359 Jy/beam
! Combined flux in latest and established models = 0.392022 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 26 components and 0.392022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036511Jy  sigma=0.025799
! Fit after  self-cal, rms=0.036492Jy  sigma=0.025786
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        0.97     KP        0.90     LA        1.05     
!   MK        1.11     NL        1.05     OV        0.96     PT        0.89     
!   SC        0.93     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.10     HN        0.99     KP        0.94     LA        1.10     
!   MK        1.04     NL        1.08     OV        1.01     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        0.98     KP        0.96     LA        1.04     
!   MK        1.09     NL        1.10     OV        0.98     PT        0.94     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     HN        0.97     KP        0.97     LA        1.06     
!   MK        1.08     NL        0.99     OV        0.96     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        0.97     KP        0.98     LA        1.09     
!   MK        1.06     NL        0.99     OV        0.95     PT        0.91     
!   SC        0.97     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.02     KP        1.00     LA        1.15     
!   MK        1.03     NL        0.97     OV        0.96     PT        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        0.96     KP        0.95     LA        1.06     
!   MK        1.04     NL        1.01     OV        0.97     PT        0.96     
!   SC        0.94     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        0.98     KP        1.00     LA        1.07     
!   MK        1.04     NL        0.97     OV        0.97     PT        0.92     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.036492Jy  sigma=0.025786
! Fit after  self-cal, rms=0.022746Jy  sigma=0.016125
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.551 mas, bmaj=4.863 mas, bpa=22.08 degrees
! Estimated noise=14.8015 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.1, 4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00274771 Jy
! Component: 100  -  total flux cleaned = 0.0038774 Jy
! Component: 150  -  total flux cleaned = 0.00429069 Jy
! Component: 200  -  total flux cleaned = 0.00459935 Jy
! Total flux subtracted in 200 components = 0.00459935 Jy
! Clean residual min=-0.001502 max=0.001788 Jy/beam
! Clean residual mean=-0.000002 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.396621 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 49 components and 0.396621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022348Jy  sigma=0.015846
! Fit after  self-cal, rms=0.022336Jy  sigma=0.015828
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022336Jy  sigma=0.015828
! Fit after  self-cal, rms=0.022317Jy  sigma=0.015809
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.55 mas, bmaj=4.859 mas, bpa=22.07 degrees
! Estimated noise=14.8112 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134223 Jy
! Component: 100  -  total flux cleaned = 0.00180657 Jy
! Component: 150  -  total flux cleaned = 0.00206765 Jy
! Component: 200  -  total flux cleaned = 0.00218257 Jy
! Total flux subtracted in 200 components = 0.00218257 Jy
! Clean residual min=-0.001407 max=0.001537 Jy/beam
! Clean residual mean=-0.000002 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.398804 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 62 components and 0.398803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022192Jy  sigma=0.015721
! Fit after  self-cal, rms=0.022187Jy  sigma=0.015716
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.5, 37.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000467976 Jy
! Component: 100  -  total flux cleaned = 0.000616715 Jy
! Component: 150  -  total flux cleaned = 0.000771162 Jy
! Component: 200  -  total flux cleaned = 0.000908273 Jy
! Total flux subtracted in 200 components = 0.000908273 Jy
! Clean residual min=-0.001408 max=0.001210 Jy/beam
! Clean residual mean=-0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.399712 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 82 components and 0.399712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022067Jy  sigma=0.015627
! Fit after  self-cal, rms=0.022064Jy  sigma=0.015625
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022064Jy  sigma=0.015625
! Fit after  self-cal, rms=0.021811Jy  sigma=0.015440
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.55 mas, bmaj=4.855 mas, bpa=22.1 degrees
! Estimated noise=14.8204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000761926 Jy
! Component: 100  -  total flux cleaned = 0.00117442 Jy
! Component: 150  -  total flux cleaned = 0.00142928 Jy
! Component: 200  -  total flux cleaned = 0.00162081 Jy
! Total flux subtracted in 200 components = 0.00162081 Jy
! Clean residual min=-0.001316 max=0.000947 Jy/beam
! Clean residual mean=-0.000001 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.401333 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 102 components and 0.401333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021761Jy  sigma=0.015403
! Fit after  self-cal, rms=0.021760Jy  sigma=0.015402
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000233432 Jy
! Component: 100  -  total flux cleaned = 0.000381632 Jy
! Component: 150  -  total flux cleaned = 0.000441586 Jy
! Component: 200  -  total flux cleaned = 0.000512114 Jy
! Total flux subtracted in 200 components = 0.000512114 Jy
! Clean residual min=-0.001265 max=0.000907 Jy/beam
! Clean residual mean=-0.000001 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.401845 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 124 components and 0.401845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021740Jy  sigma=0.015388
! Fit after  self-cal, rms=0.021740Jy  sigma=0.015387
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021740Jy  sigma=0.015387
! Fit after  self-cal, rms=0.021742Jy  sigma=0.015382
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.402 mas, bmaj=6.514 mas, bpa=15.98 degrees
! Estimated noise=19.4728 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000567365 Jy
! Component: 100  -  total flux cleaned = 0.000725327 Jy
! Component: 150  -  total flux cleaned = 0.000758324 Jy
! Component: 200  -  total flux cleaned = 0.00072141 Jy
! Total flux subtracted in 200 components = 0.00072141 Jy
! Clean residual min=-0.001078 max=0.001066 Jy/beam
! Clean residual mean=-0.000002 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.402566 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 135 components and 0.402566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021736Jy  sigma=0.015377
! Fit after  self-cal, rms=0.021735Jy  sigma=0.015376
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174033 Jy
! Component: 100  -  total flux cleaned = 0.000166223 Jy
! Component: 150  -  total flux cleaned = 0.000143363 Jy
! Component: 200  -  total flux cleaned = 0.000128982 Jy
! Total flux subtracted in 200 components = 0.000128982 Jy
! Clean residual min=-0.001072 max=0.001055 Jy/beam
! Clean residual mean=-0.000002 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.402695 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 153 components and 0.402695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021733Jy  sigma=0.015375
! Fit after  self-cal, rms=0.021733Jy  sigma=0.015375
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.55 mas, bmaj=4.853 mas, bpa=22.1 degrees
! Estimated noise=14.8282 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.55 x 4.853 at 22.1 degrees (North through East)
! Clean map  min=-0.0017737  max=0.37993 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.226 mas, bmaj=4.422 mas, bpa=23.23 degrees
! Estimated noise=22.1649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.293381 Jy
! Component: 100  -  total flux cleaned = 0.35736 Jy
! Component: 150  -  total flux cleaned = 0.373754 Jy
! Component: 200  -  total flux cleaned = 0.381603 Jy
! Total flux subtracted in 200 components = 0.381603 Jy
! Clean residual min=-0.002983 max=0.004078 Jy/beam
! Clean residual mean=-0.000011 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.381603 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.381603 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.55 mas, bmaj=4.853 mas, bpa=22.1 degrees
! Estimated noise=14.8282 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00741977 Jy
! Component: 100  -  total flux cleaned = 0.011807 Jy
! Component: 150  -  total flux cleaned = 0.0145901 Jy
! Component: 200  -  total flux cleaned = 0.016496 Jy
! Total flux subtracted in 200 components = 0.016496 Jy
! Clean residual min=-0.001309 max=0.001230 Jy/beam
! Clean residual mean=-0.000003 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.398099 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 51 components and 0.398099 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.402 mas, bmaj=6.514 mas, bpa=15.98 degrees
! Estimated noise=19.4728 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00207812 Jy
! Component: 100  -  total flux cleaned = 0.00303797 Jy
! Component: 150  -  total flux cleaned = 0.00345522 Jy
! Component: 200  -  total flux cleaned = 0.00362098 Jy
! Total flux subtracted in 200 components = 0.00362098 Jy
! Clean residual min=-0.001120 max=0.001348 Jy/beam
! Clean residual mean=-0.000003 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.40172 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.32149e-05 Jy
! Component: 100  -  total flux cleaned = 9.52616e-05 Jy
! Component: 150  -  total flux cleaned = 0.000115096 Jy
! Component: 200  -  total flux cleaned = 0.000170126 Jy
! Total flux subtracted in 200 components = 0.000170126 Jy
! Clean residual min=-0.001092 max=0.001215 Jy/beam
! Clean residual mean=-0.000002 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.40189 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 106 components and 0.40189 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.55 mas, bmaj=4.853 mas, bpa=22.1 degrees
! Estimated noise=14.8282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.12526e-05 Jy
! Component: 100  -  total flux cleaned = 0.000139902 Jy
! Component: 150  -  total flux cleaned = 0.000261032 Jy
! Component: 200  -  total flux cleaned = 0.000395167 Jy
! Total flux subtracted in 200 components = 0.000395167 Jy
! Clean residual min=-0.001103 max=0.000961 Jy/beam
! Clean residual mean=-0.000001 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.402285 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 127 components and 0.402285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021816Jy  sigma=0.015431
! Fit after  self-cal, rms=0.021810Jy  sigma=0.015426
wmodel /scr/pima/bp171a7_uvs/J1302+5748_C_map.mod
! Writing 127 model components to file: /scr/pima/bp171a7_uvs/J1302+5748_C_map.mod
wobs /scr/pima/bp171a7_uvs/J1302+5748_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1302+5748_C_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1302+5748_C_map.win
! wwins: Wrote 3 windows to /scr/pima/bp171a7_uvs/J1302+5748_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000267498 Jy
! Component: 100  -  total flux cleaned = -0.000234232 Jy
! Component: 150  -  total flux cleaned = -0.000357014 Jy
! Component: 200  -  total flux cleaned = -0.000504456 Jy
! Component: 250  -  total flux cleaned = -0.000575744 Jy
! Component: 300  -  total flux cleaned = -0.000644855 Jy
! Component: 350  -  total flux cleaned = -0.000712325 Jy
! Component: 400  -  total flux cleaned = -0.00076527 Jy
! Component: 450  -  total flux cleaned = -0.000830192 Jy
! Component: 500  -  total flux cleaned = -0.000881527 Jy
! Component: 550  -  total flux cleaned = -0.000981763 Jy
! Component: 600  -  total flux cleaned = -0.00106803 Jy
! Component: 650  -  total flux cleaned = -0.00114083 Jy
! Component: 700  -  total flux cleaned = -0.00121251 Jy
! Component: 750  -  total flux cleaned = -0.00125973 Jy
! Component: 800  -  total flux cleaned = -0.00134092 Jy
! Component: 850  -  total flux cleaned = -0.0013865 Jy
! Component: 900  -  total flux cleaned = -0.00144287 Jy
! Component: 950  -  total flux cleaned = -0.00147659 Jy
! Component: 1000  -  total flux cleaned = -0.0015646 Jy
! Component: 1050  -  total flux cleaned = -0.00166208 Jy
! Component: 1100  -  total flux cleaned = -0.00168349 Jy
! Component: 1150  -  total flux cleaned = -0.00176822 Jy
! Component: 1200  -  total flux cleaned = -0.00183108 Jy
! Component: 1250  -  total flux cleaned = -0.00189314 Jy
! Component: 1300  -  total flux cleaned = -0.00197506 Jy
! Component: 1350  -  total flux cleaned = -0.00201554 Jy
! Component: 1400  -  total flux cleaned = -0.00207572 Jy
! Component: 1450  -  total flux cleaned = -0.00210557 Jy
! Component: 1500  -  total flux cleaned = -0.00213497 Jy
! Component: 1550  -  total flux cleaned = -0.0021739 Jy
! Component: 1600  -  total flux cleaned = -0.00223156 Jy
! Component: 1650  -  total flux cleaned = -0.00226958 Jy
! Component: 1700  -  total flux cleaned = -0.00228843 Jy
! Component: 1750  -  total flux cleaned = -0.00237262 Jy
! Component: 1800  -  total flux cleaned = -0.00241888 Jy
! Component: 1850  -  total flux cleaned = -0.00244634 Jy
! Component: 1900  -  total flux cleaned = -0.00250085 Jy
! Component: 1950  -  total flux cleaned = -0.00252778 Jy
! Component: 2000  -  total flux cleaned = -0.0025991 Jy
! Component: 2050  -  total flux cleaned = -0.00266087 Jy
! Component: 2100  -  total flux cleaned = -0.00272206 Jy
! Component: 2150  -  total flux cleaned = -0.00275675 Jy
! Component: 2200  -  total flux cleaned = -0.00279959 Jy
! Component: 2250  -  total flux cleaned = -0.00284213 Jy
! Component: 2300  -  total flux cleaned = -0.00288442 Jy
! Component: 2350  -  total flux cleaned = -0.00293478 Jy
! Component: 2400  -  total flux cleaned = -0.00296791 Jy
! Component: 2450  -  total flux cleaned = -0.00300092 Jy
! Component: 2500  -  total flux cleaned = -0.0030665 Jy
! Component: 2550  -  total flux cleaned = -0.00309894 Jy
! Component: 2600  -  total flux cleaned = -0.00314731 Jy
! Component: 2650  -  total flux cleaned = -0.00320328 Jy
! Component: 2700  -  total flux cleaned = -0.00321126 Jy
! Component: 2750  -  total flux cleaned = -0.0032506 Jy
! Component: 2800  -  total flux cleaned = -0.00325065 Jy
! Component: 2850  -  total flux cleaned = -0.00329725 Jy
! Component: 2900  -  total flux cleaned = -0.00335109 Jy
! Component: 2950  -  total flux cleaned = -0.0034046 Jy
! Component: 3000  -  total flux cleaned = -0.00337414 Jy
! Component: 3050  -  total flux cleaned = -0.00341941 Jy
! Component: 3100  -  total flux cleaned = -0.00345684 Jy
! Component: 3150  -  total flux cleaned = -0.00348652 Jy
! Component: 3200  -  total flux cleaned = -0.0035086 Jy
! Component: 3250  -  total flux cleaned = -0.00354525 Jy
! Component: 3300  -  total flux cleaned = -0.0035453 Jy
! Component: 3350  -  total flux cleaned = -0.00358872 Jy
! Component: 3400  -  total flux cleaned = -0.00366762 Jy
! Component: 3450  -  total flux cleaned = -0.00367479 Jy
! Component: 3500  -  total flux cleaned = -0.00371717 Jy
! Component: 3550  -  total flux cleaned = -0.00377338 Jy
! Component: 3600  -  total flux cleaned = -0.00377341 Jy
! Component: 3650  -  total flux cleaned = -0.00380811 Jy
! Component: 3700  -  total flux cleaned = -0.00384932 Jy
! Component: 3750  -  total flux cleaned = -0.00385618 Jy
! Component: 3800  -  total flux cleaned = -0.00389698 Jy
! Component: 3850  -  total flux cleaned = -0.00392399 Jy
! Component: 3900  -  total flux cleaned = -0.00396422 Jy
! Component: 3950  -  total flux cleaned = -0.00396422 Jy
! Component: 4000  -  total flux cleaned = -0.00402393 Jy
! Component: 4050  -  total flux cleaned = -0.00406999 Jy
! Total flux subtracted in 4096 components = -0.00406343 Jy
! Clean residual min=-0.000346 max=0.000389 Jy/beam
! Clean residual mean=-0.000002 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.398222 Jy
keep
! Adding 288 model components to the UV plane model.
! The established model now contains 415 components and 0.398222 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1302+5748_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.55 x 4.853 at 22.1 degrees (North through East)
! Clean map  min=-0.0011922  max=0.37966 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1302+5748_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.379658 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000120162 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0949507 0.0949507 0.189901 0.379803 0.759605 1.51921 3.03842 6.07684 12.1537 24.3074 48.6147 97.2295
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.379 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1302+5748_C_uvs.log closed on Sun May 12 14:54:12 2013