! Started logfile: /scr/pima/bp171a7_uvs/J1251-1927_X_uvs.log on Sun May 12 14:04:10 2013
obs /scr/pima/bp171a7_uvs/J1251-1927_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1251-1927_X_uva.fits
! AN table 1: 15 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.837037 visibilities/baseline/integration-bin.
! Found source: J1251-1927
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3616 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1251-1927_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.984612Jy  sigma=0.677481
! Fit after  self-cal, rms=0.937131Jy  sigma=0.643411
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7757 mas, bmaj=2.16 mas, bpa=-7.911 degrees
! Estimated noise=27.2174 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0426775 Jy
! Component: 100  -  total flux cleaned = 0.0591589 Jy
! Total flux subtracted in 100 components = 0.0591589 Jy
! Clean residual min=-0.007388 max=0.015696 Jy/beam
! Clean residual mean=0.000011 rms=0.002320 Jy/beam
! Combined flux in latest and established models = 0.0591589 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0591589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053025Jy  sigma=0.036789
! Fit after  self-cal, rms=0.052306Jy  sigma=0.036312
! Inverting map 
! Added new window around map position (-1.6, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0167815 Jy
! Component: 100  -  total flux cleaned = 0.0263469 Jy
! Total flux subtracted in 100 components = 0.0263469 Jy
! Clean residual min=-0.005556 max=0.008538 Jy/beam
! Clean residual mean=0.000005 rms=0.001518 Jy/beam
! Combined flux in latest and established models = 0.0855058 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 20 components and 0.0855058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044301Jy  sigma=0.030656
! Fit after  self-cal, rms=0.042467Jy  sigma=0.029426
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113527 Jy
! Component: 100  -  total flux cleaned = 0.0173802 Jy
! Total flux subtracted in 100 components = 0.0173802 Jy
! Clean residual min=-0.004414 max=0.004748 Jy/beam
! Clean residual mean=0.000000 rms=0.001104 Jy/beam
! Combined flux in latest and established models = 0.102886 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 24 components and 0.102886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038313Jy  sigma=0.026468
! Fit after  self-cal, rms=0.037809Jy  sigma=0.026120
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9623 mas, bmaj=2.59 mas, bpa=-5.373 degrees
! Estimated noise=17.1437 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00739382 Jy
! Component: 100  -  total flux cleaned = 0.010961 Jy
! Component: 150  -  total flux cleaned = 0.0124801 Jy
! Component: 200  -  total flux cleaned = 0.0126838 Jy
! Total flux subtracted in 200 components = 0.0126838 Jy
! Clean residual min=-0.003297 max=0.003388 Jy/beam
! Clean residual mean=-0.000011 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.11557 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 36 components and 0.11557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036429Jy  sigma=0.025123
! Fit after  self-cal, rms=0.036301Jy  sigma=0.025035
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.11     HN        0.81     KP        0.93     LA        1.06     
!   MK        1.09     NL        1.00     OV        1.07     PT        0.83     
!   SC        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        0.96     KP        0.97     LA        0.98     
!   MK        0.97     NL        0.98     OV        1.02     PT        0.94     
!   SC        0.85     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        0.98     KP        1.08     LA        0.99     
!   MK        1.07     NL        0.95     OV        1.05     PT        0.96     
!   SC        0.89     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     HN        0.95     KP        1.03     LA        0.97     
!   MK        1.10     NL        0.95     OV        1.00     PT        0.95     
!   SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        0.96     KP        1.15     LA        0.93     
!   MK        0.97     NL        0.97     OV        0.99     PT        0.92     
!   SC        0.93     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.00     KP        1.04     LA        1.04     
!   MK        0.95     NL        0.98     OV        1.06     PT        0.95     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.02     KP        1.09     LA        0.97     
!   MK        1.07     NL        0.95     OV        1.11     PT        0.93     
!   SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        0.84     KP        1.18     LA        0.94     
!   MK        1.01     NL        0.95     OV        1.10     PT        0.86     
!   SC        1.08     
! 
! 
! Fit before self-cal, rms=0.036301Jy  sigma=0.025035
! Fit after  self-cal, rms=0.034978Jy  sigma=0.024492
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.962 mas, bmaj=2.583 mas, bpa=-4.899 degrees
! Estimated noise=16.6945 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000418193 Jy
! Component: 100  -  total flux cleaned = 0.000371472 Jy
! Component: 150  -  total flux cleaned = 0.000329417 Jy
! Component: 200  -  total flux cleaned = 0.000297115 Jy
! Total flux subtracted in 200 components = 0.000297115 Jy
! Clean residual min=-0.001907 max=0.002371 Jy/beam
! Clean residual mean=0.000001 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.115867 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 49 components and 0.115867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034838Jy  sigma=0.024373
! Fit after  self-cal, rms=0.034822Jy  sigma=0.024332
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034822Jy  sigma=0.024332
! Fit after  self-cal, rms=0.034800Jy  sigma=0.024327
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9621 mas, bmaj=2.574 mas, bpa=-4.607 degrees
! Estimated noise=16.6546 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00020553 Jy
! Component: 100  -  total flux cleaned = -0.000169108 Jy
! Component: 150  -  total flux cleaned = -0.000113499 Jy
! Component: 200  -  total flux cleaned = -6.27432e-05 Jy
! Total flux subtracted in 200 components = -6.27432e-05 Jy
! Clean residual min=-0.001722 max=0.002190 Jy/beam
! Clean residual mean=0.000001 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.115804 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 52 components and 0.115804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034744Jy  sigma=0.024280
! Fit after  self-cal, rms=0.034738Jy  sigma=0.024275
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.87588e-05 Jy
! Component: 100  -  total flux cleaned = -1.85087e-05 Jy
! Component: 150  -  total flux cleaned = 4.10328e-05 Jy
! Component: 200  -  total flux cleaned = 7.51347e-05 Jy
! Total flux subtracted in 200 components = 7.51347e-05 Jy
! Clean residual min=-0.001616 max=0.002103 Jy/beam
! Clean residual mean=0.000001 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.115879 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 58 components and 0.115879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034714Jy  sigma=0.024255
! Fit after  self-cal, rms=0.034709Jy  sigma=0.024253
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034709Jy  sigma=0.024253
! Fit after  self-cal, rms=0.034690Jy  sigma=0.024249
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9611 mas, bmaj=2.565 mas, bpa=-4.424 degrees
! Estimated noise=16.6196 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000279844 Jy
! Component: 100  -  total flux cleaned = -0.000224276 Jy
! Component: 150  -  total flux cleaned = -0.000177263 Jy
! Component: 200  -  total flux cleaned = -0.000149715 Jy
! Total flux subtracted in 200 components = -0.000149715 Jy
! Clean residual min=-0.001506 max=0.002005 Jy/beam
! Clean residual mean=0.000001 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.11573 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 58 components and 0.11573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034674Jy  sigma=0.024236
! Fit after  self-cal, rms=0.034672Jy  sigma=0.024235
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.39179e-05 Jy
! Component: 100  -  total flux cleaned = 4.27858e-06 Jy
! Component: 150  -  total flux cleaned = 2.54387e-05 Jy
! Component: 200  -  total flux cleaned = 3.54328e-05 Jy
! Total flux subtracted in 200 components = 3.54328e-05 Jy
! Clean residual min=-0.001473 max=0.001968 Jy/beam
! Clean residual mean=0.000001 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.115765 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 60 components and 0.115765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034666Jy  sigma=0.024229
! Fit after  self-cal, rms=0.034664Jy  sigma=0.024229
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034664Jy  sigma=0.024229
! Fit after  self-cal, rms=0.034666Jy  sigma=0.024227
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.006 mas, bmaj=5.164 mas, bpa=-5.543 degrees
! Estimated noise=21.1792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000217955 Jy
! Component: 100  -  total flux cleaned = -0.000207773 Jy
! Component: 150  -  total flux cleaned = -0.000207333 Jy
! Component: 200  -  total flux cleaned = -0.000207432 Jy
! Total flux subtracted in 200 components = -0.000207432 Jy
! Clean residual min=-0.001939 max=0.002755 Jy/beam
! Clean residual mean=0.000002 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.115558 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 61 components and 0.115558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034665Jy  sigma=0.024224
! Fit after  self-cal, rms=0.034658Jy  sigma=0.024220
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.40363e-05 Jy
! Component: 100  -  total flux cleaned = -2.67714e-05 Jy
! Component: 150  -  total flux cleaned = 2.36066e-06 Jy
! Component: 200  -  total flux cleaned = 8.07099e-06 Jy
! Total flux subtracted in 200 components = 8.07099e-06 Jy
! Clean residual min=-0.001936 max=0.002704 Jy/beam
! Clean residual mean=0.000002 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.115566 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 63 components and 0.115566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034662Jy  sigma=0.024221
! Fit after  self-cal, rms=0.034656Jy  sigma=0.024218
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9604 mas, bmaj=2.558 mas, bpa=-4.294 degrees
! Estimated noise=16.5966 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9604 x 2.558 at -4.294 degrees (North through East)
! Clean map  min=-0.001399  max=0.049143 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7744 mas, bmaj=2.131 mas, bpa=-6.734 degrees
! Estimated noise=26.1724 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0452029 Jy
! Component: 100  -  total flux cleaned = 0.0667838 Jy
! Component: 150  -  total flux cleaned = 0.0794283 Jy
! Component: 200  -  total flux cleaned = 0.088214 Jy
! Total flux subtracted in 200 components = 0.088214 Jy
! Clean residual min=-0.003602 max=0.005585 Jy/beam
! Clean residual mean=0.000007 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 0.088214 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.088214 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9604 mas, bmaj=2.558 mas, bpa=-4.294 degrees
! Estimated noise=16.5966 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104217 Jy
! Component: 100  -  total flux cleaned = 0.0166021 Jy
! Component: 150  -  total flux cleaned = 0.020379 Jy
! Component: 200  -  total flux cleaned = 0.0227075 Jy
! Total flux subtracted in 200 components = 0.0227075 Jy
! Clean residual min=-0.001791 max=0.001839 Jy/beam
! Clean residual mean=0.000001 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.110922 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 45 components and 0.110922 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.006 mas, bmaj=5.164 mas, bpa=-5.543 degrees
! Estimated noise=21.1792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00230701 Jy
! Component: 100  -  total flux cleaned = 0.00337862 Jy
! Component: 150  -  total flux cleaned = 0.00389599 Jy
! Component: 200  -  total flux cleaned = 0.00404978 Jy
! Total flux subtracted in 200 components = 0.00404978 Jy
! Clean residual min=-0.002113 max=0.002671 Jy/beam
! Clean residual mean=0.000002 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.114971 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.64356e-05 Jy
! Component: 100  -  total flux cleaned = 3.40059e-05 Jy
! Component: 150  -  total flux cleaned = 4.106e-05 Jy
! Component: 200  -  total flux cleaned = 4.80863e-05 Jy
! Total flux subtracted in 200 components = 4.80863e-05 Jy
! Clean residual min=-0.002098 max=0.002666 Jy/beam
! Clean residual mean=0.000002 rms=0.000747 Jy/beam
! Combined flux in latest and established models = 0.115019 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 58 components and 0.115019 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9604 mas, bmaj=2.558 mas, bpa=-4.294 degrees
! Estimated noise=16.5966 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000261311 Jy
! Component: 100  -  total flux cleaned = -0.000301152 Jy
! Component: 150  -  total flux cleaned = -0.000302003 Jy
! Component: 200  -  total flux cleaned = -0.00030239 Jy
! Total flux subtracted in 200 components = -0.00030239 Jy
! Clean residual min=-0.001555 max=0.001900 Jy/beam
! Clean residual mean=0.000001 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.114717 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 67 components and 0.114717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034664Jy  sigma=0.024224
! Fit after  self-cal, rms=0.034654Jy  sigma=0.024220
wmodel /scr/pima/bp171a7_uvs/J1251-1927_X_map.mod
! Writing 67 model components to file: /scr/pima/bp171a7_uvs/J1251-1927_X_map.mod
wobs /scr/pima/bp171a7_uvs/J1251-1927_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1251-1927_X_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1251-1927_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a7_uvs/J1251-1927_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000792879 Jy
! Component: 100  -  total flux cleaned = 0.00114333 Jy
! Component: 150  -  total flux cleaned = 0.001277 Jy
! Component: 200  -  total flux cleaned = 0.00142644 Jy
! Component: 250  -  total flux cleaned = 0.00152082 Jy
! Component: 300  -  total flux cleaned = 0.00165464 Jy
! Component: 350  -  total flux cleaned = 0.00178234 Jy
! Component: 400  -  total flux cleaned = 0.00188401 Jy
! Component: 450  -  total flux cleaned = 0.00198137 Jy
! Component: 500  -  total flux cleaned = 0.0020193 Jy
! Component: 550  -  total flux cleaned = 0.00209221 Jy
! Component: 600  -  total flux cleaned = 0.00216187 Jy
! Component: 650  -  total flux cleaned = 0.00217906 Jy
! Component: 700  -  total flux cleaned = 0.00224474 Jy
! Component: 750  -  total flux cleaned = 0.0023395 Jy
! Component: 800  -  total flux cleaned = 0.00240133 Jy
! Component: 850  -  total flux cleaned = 0.00250598 Jy
! Component: 900  -  total flux cleaned = 0.00259327 Jy
! Component: 950  -  total flux cleaned = 0.00267803 Jy
! Component: 1000  -  total flux cleaned = 0.00269187 Jy
! Component: 1050  -  total flux cleaned = 0.00273216 Jy
! Component: 1100  -  total flux cleaned = 0.00274536 Jy
! Component: 1150  -  total flux cleaned = 0.00274565 Jy
! Component: 1200  -  total flux cleaned = 0.00274598 Jy
! Component: 1250  -  total flux cleaned = 0.00275843 Jy
! Component: 1300  -  total flux cleaned = 0.00277093 Jy
! Component: 1350  -  total flux cleaned = 0.00278311 Jy
! Component: 1400  -  total flux cleaned = 0.00281833 Jy
! Component: 1450  -  total flux cleaned = 0.00285283 Jy
! Component: 1500  -  total flux cleaned = 0.00287532 Jy
! Component: 1550  -  total flux cleaned = 0.00289741 Jy
! Component: 1600  -  total flux cleaned = 0.00294082 Jy
! Component: 1650  -  total flux cleaned = 0.00295129 Jy
! Component: 1700  -  total flux cleaned = 0.00298276 Jy
! Component: 1750  -  total flux cleaned = 0.00296209 Jy
! Component: 1800  -  total flux cleaned = 0.00301327 Jy
! Component: 1850  -  total flux cleaned = 0.00303332 Jy
! Component: 1900  -  total flux cleaned = 0.00302365 Jy
! Component: 1950  -  total flux cleaned = 0.00309189 Jy
! Component: 2000  -  total flux cleaned = 0.00316844 Jy
! Component: 2050  -  total flux cleaned = 0.00317799 Jy
! Component: 2100  -  total flux cleaned = 0.00325257 Jy
! Component: 2150  -  total flux cleaned = 0.00330773 Jy
! Component: 2200  -  total flux cleaned = 0.00337098 Jy
! Component: 2250  -  total flux cleaned = 0.00342464 Jy
! Component: 2300  -  total flux cleaned = 0.0035129 Jy
! Component: 2350  -  total flux cleaned = 0.00354773 Jy
! Component: 2400  -  total flux cleaned = 0.00358228 Jy
! Component: 2450  -  total flux cleaned = 0.00358233 Jy
! Component: 2500  -  total flux cleaned = 0.00359095 Jy
! Component: 2550  -  total flux cleaned = 0.00364133 Jy
! Component: 2600  -  total flux cleaned = 0.00366628 Jy
! Component: 2650  -  total flux cleaned = 0.00368278 Jy
! Component: 2700  -  total flux cleaned = 0.00369915 Jy
! Component: 2750  -  total flux cleaned = 0.00372355 Jy
! Component: 2800  -  total flux cleaned = 0.00373972 Jy
! Component: 2850  -  total flux cleaned = 0.00376381 Jy
! Component: 2900  -  total flux cleaned = 0.00379561 Jy
! Component: 2950  -  total flux cleaned = 0.00381137 Jy
! Component: 3000  -  total flux cleaned = 0.00383486 Jy
! Component: 3050  -  total flux cleaned = 0.00386598 Jy
! Component: 3100  -  total flux cleaned = 0.00387372 Jy
! Component: 3150  -  total flux cleaned = 0.00389678 Jy
! Component: 3200  -  total flux cleaned = 0.00391201 Jy
! Component: 3250  -  total flux cleaned = 0.00392714 Jy
! Component: 3300  -  total flux cleaned = 0.00395727 Jy
! Component: 3350  -  total flux cleaned = 0.00399469 Jy
! Component: 3400  -  total flux cleaned = 0.00400954 Jy
! Component: 3450  -  total flux cleaned = 0.00403181 Jy
! Component: 3500  -  total flux cleaned = 0.00404656 Jy
! Component: 3550  -  total flux cleaned = 0.00408321 Jy
! Component: 3600  -  total flux cleaned = 0.00411239 Jy
! Component: 3650  -  total flux cleaned = 0.00410515 Jy
! Component: 3700  -  total flux cleaned = 0.004163 Jy
! Component: 3750  -  total flux cleaned = 0.00417739 Jy
! Component: 3800  -  total flux cleaned = 0.00420609 Jy
! Component: 3850  -  total flux cleaned = 0.00423456 Jy
! Component: 3900  -  total flux cleaned = 0.00427 Jy
! Component: 3950  -  total flux cleaned = 0.00428413 Jy
! Component: 4000  -  total flux cleaned = 0.0043123 Jy
! Component: 4050  -  total flux cleaned = 0.00432632 Jy
! Total flux subtracted in 4096 components = 0.0043751 Jy
! Clean residual min=-0.000480 max=0.000369 Jy/beam
! Clean residual mean=0.000000 rms=0.000116 Jy/beam
! Combined flux in latest and established models = 0.119092 Jy
keep
! Adding 242 model components to the UV plane model.
! The established model now contains 309 components and 0.119092 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1251-1927_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9604 x 2.558 at -4.294 degrees (North through East)
! Clean map  min=-0.00088636  max=0.051033 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1251-1927_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0510328 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000110219 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.647933 0.647933 1.29587 2.59173 5.18346 10.3669 20.7338 41.4677 82.9354
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.051 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1251-1927_X_uvs.log closed on Sun May 12 14:04:14 2013