! Started logfile: /scr/pima/bp171a7_uvs/J1251-1927_C_uvs.log on Sun May 12 14:53:44 2013
obs /scr/pima/bp171a7_uvs/J1251-1927_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1251-1927_C_uva.fits
! AN table 1: 15 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.864815 visibilities/baseline/integration-bin.
! Found source: J1251-1927
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3736 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1251-1927_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009410Jy  sigma=0.695437
! Fit after  self-cal, rms=0.929116Jy  sigma=0.637177
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.26 mas, bmaj=3.754 mas, bpa=-4.364 degrees
! Estimated noise=29.7076 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0473144 Jy
! Component: 100  -  total flux cleaned = 0.0703399 Jy
! Total flux subtracted in 100 components = 0.0703399 Jy
! Clean residual min=-0.005972 max=0.011549 Jy/beam
! Clean residual mean=-0.000004 rms=0.001724 Jy/beam
! Combined flux in latest and established models = 0.0703399 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0703399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041752Jy  sigma=0.028885
! Fit after  self-cal, rms=0.041015Jy  sigma=0.028473
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163039 Jy
! Component: 100  -  total flux cleaned = 0.0257703 Jy
! Total flux subtracted in 100 components = 0.0257703 Jy
! Clean residual min=-0.003461 max=0.004751 Jy/beam
! Clean residual mean=-0.000002 rms=0.000956 Jy/beam
! Combined flux in latest and established models = 0.0961103 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 12 components and 0.0961103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031154Jy  sigma=0.021518
! Fit after  self-cal, rms=0.031064Jy  sigma=0.021465
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.63 mas, bmaj=4.487 mas, bpa=-2.193 degrees
! Estimated noise=16.8494 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00817888 Jy
! Component: 100  -  total flux cleaned = 0.0120244 Jy
! Component: 150  -  total flux cleaned = 0.0139349 Jy
! Component: 200  -  total flux cleaned = 0.0149639 Jy
! Total flux subtracted in 200 components = 0.0149639 Jy
! Clean residual min=-0.002457 max=0.003653 Jy/beam
! Clean residual mean=-0.000001 rms=0.000836 Jy/beam
! Combined flux in latest and established models = 0.111074 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 32 components and 0.111074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029126Jy  sigma=0.020089
! Fit after  self-cal, rms=0.029114Jy  sigma=0.020082
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     HN        0.94     KP        0.99     LA        0.97     
!   MK        1.09     NL        1.12     OV        0.97     PT        0.87     
!   SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     HN        1.06     KP        0.99     LA        1.02     
!   MK        1.04     NL        1.17     OV        1.04     PT        0.99     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.95     KP        0.93     LA        1.04     
!   MK        1.09     NL        1.21     OV        0.98     PT        0.94     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     HN        0.99     KP        0.99     LA        0.99     
!   MK        1.00     NL        1.00     OV        0.98     PT        0.96     
!   SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     HN        0.97     KP        0.97     LA        1.07     
!   MK        1.01     NL        1.08     OV        0.98     PT        0.88     
!   SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     HN        1.09     KP        0.99     LA        1.07     
!   MK        1.05     NL        0.99     OV        1.01     PT        1.02     
!   SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     HN        0.97     KP        0.96     LA        1.02     
!   MK        1.01     NL        1.04     OV        0.99     PT        0.94     
!   SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     HN        0.98     KP        1.03     LA        1.01     
!   MK        0.99     NL        1.03     OV        1.01     PT        0.90     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.029114Jy  sigma=0.020082
! Fit after  self-cal, rms=0.028286Jy  sigma=0.019471
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.63 mas, bmaj=4.494 mas, bpa=-1.783 degrees
! Estimated noise=16.7341 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.6, -32.1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00355733 Jy
! Component: 100  -  total flux cleaned = 0.00531787 Jy
! Component: 150  -  total flux cleaned = 0.00643262 Jy
! Component: 200  -  total flux cleaned = 0.00723314 Jy
! Total flux subtracted in 200 components = 0.00723314 Jy
! Clean residual min=-0.001401 max=0.001529 Jy/beam
! Clean residual mean=-0.000001 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.118307 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 71 components and 0.118307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027864Jy  sigma=0.019160
! Fit after  self-cal, rms=0.027867Jy  sigma=0.019146
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027867Jy  sigma=0.019146
! Fit after  self-cal, rms=0.027823Jy  sigma=0.019134
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.632 mas, bmaj=4.497 mas, bpa=-1.606 degrees
! Estimated noise=16.6797 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000558832 Jy
! Component: 100  -  total flux cleaned = 0.000676605 Jy
! Component: 150  -  total flux cleaned = 0.000797552 Jy
! Component: 200  -  total flux cleaned = 0.000887275 Jy
! Total flux subtracted in 200 components = 0.000887275 Jy
! Clean residual min=-0.001260 max=0.001392 Jy/beam
! Clean residual mean=-0.000001 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.119195 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 82 components and 0.119195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027789Jy  sigma=0.019109
! Fit after  self-cal, rms=0.027789Jy  sigma=0.019108
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.94278e-05 Jy
! Component: 100  -  total flux cleaned = 0.000147609 Jy
! Component: 150  -  total flux cleaned = 0.000220173 Jy
! Component: 200  -  total flux cleaned = 0.000272343 Jy
! Total flux subtracted in 200 components = 0.000272343 Jy
! Clean residual min=-0.001221 max=0.001376 Jy/beam
! Clean residual mean=-0.000001 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.119467 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 86 components and 0.119467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027775Jy  sigma=0.019098
! Fit after  self-cal, rms=0.027774Jy  sigma=0.019098
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027774Jy  sigma=0.019098
! Fit after  self-cal, rms=0.027757Jy  sigma=0.019095
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.632 mas, bmaj=4.495 mas, bpa=-1.46 degrees
! Estimated noise=16.6557 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.5218e-05 Jy
! Component: 100  -  total flux cleaned = -2.05488e-05 Jy
! Component: 150  -  total flux cleaned = -7.96413e-06 Jy
! Component: 200  -  total flux cleaned = 2.60209e-05 Jy
! Total flux subtracted in 200 components = 2.60209e-05 Jy
! Clean residual min=-0.001179 max=0.001373 Jy/beam
! Clean residual mean=-0.000001 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.119493 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 92 components and 0.119493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027746Jy  sigma=0.019088
! Fit after  self-cal, rms=0.027747Jy  sigma=0.019087
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.02722e-05 Jy
! Component: 100  -  total flux cleaned = 3.09899e-05 Jy
! Component: 150  -  total flux cleaned = 5.91061e-05 Jy
! Component: 200  -  total flux cleaned = 6.79155e-05 Jy
! Total flux subtracted in 200 components = 6.79155e-05 Jy
! Clean residual min=-0.001172 max=0.001357 Jy/beam
! Clean residual mean=-0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.119561 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 102 components and 0.119561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027741Jy  sigma=0.019083
! Fit after  self-cal, rms=0.027740Jy  sigma=0.019083
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027740Jy  sigma=0.019083
! Fit after  self-cal, rms=0.027724Jy  sigma=0.019082
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.523 mas, bmaj=8.563 mas, bpa=-3.329 degrees
! Estimated noise=21.1143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258077 Jy
! Component: 100  -  total flux cleaned = 0.000324163 Jy
! Component: 150  -  total flux cleaned = 0.00035841 Jy
! Component: 200  -  total flux cleaned = 0.000378501 Jy
! Total flux subtracted in 200 components = 0.000378501 Jy
! Clean residual min=-0.001356 max=0.001703 Jy/beam
! Clean residual mean=-0.000002 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.119939 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 110 components and 0.119939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027722Jy  sigma=0.019080
! Fit after  self-cal, rms=0.027722Jy  sigma=0.019080
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.11222e-05 Jy
! Component: 100  -  total flux cleaned = 3.15047e-05 Jy
! Component: 150  -  total flux cleaned = 4.0067e-05 Jy
! Component: 200  -  total flux cleaned = 4.00297e-05 Jy
! Total flux subtracted in 200 components = 4.00297e-05 Jy
! Clean residual min=-0.001336 max=0.001686 Jy/beam
! Clean residual mean=-0.000001 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.119979 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 117 components and 0.119979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027721Jy  sigma=0.019079
! Fit after  self-cal, rms=0.027721Jy  sigma=0.019079
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.631 mas, bmaj=4.493 mas, bpa=-1.35 degrees
! Estimated noise=16.635 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.631 x 4.493 at -1.35 degrees (North through East)
! Clean map  min=-0.0010403  max=0.069634 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.262 mas, bmaj=3.752 mas, bpa=-3.525 degrees
! Estimated noise=29.37 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0484943 Jy
! Component: 100  -  total flux cleaned = 0.0733304 Jy
! Component: 150  -  total flux cleaned = 0.087438 Jy
! Component: 200  -  total flux cleaned = 0.0957147 Jy
! Total flux subtracted in 200 components = 0.0957147 Jy
! Clean residual min=-0.003142 max=0.004276 Jy/beam
! Clean residual mean=-0.000000 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.0957147 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0957147 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.631 mas, bmaj=4.493 mas, bpa=-1.35 degrees
! Estimated noise=16.635 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00744295 Jy
! Component: 100  -  total flux cleaned = 0.0116953 Jy
! Component: 150  -  total flux cleaned = 0.0147799 Jy
! Component: 200  -  total flux cleaned = 0.0170546 Jy
! Total flux subtracted in 200 components = 0.0170546 Jy
! Clean residual min=-0.001634 max=0.001822 Jy/beam
! Clean residual mean=-0.000000 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.112769 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 39 components and 0.112769 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.523 mas, bmaj=8.563 mas, bpa=-3.329 degrees
! Estimated noise=21.1143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00280727 Jy
! Component: 100  -  total flux cleaned = 0.00451204 Jy
! Component: 150  -  total flux cleaned = 0.00559745 Jy
! Component: 200  -  total flux cleaned = 0.00605283 Jy
! Total flux subtracted in 200 components = 0.00605283 Jy
! Clean residual min=-0.001480 max=0.001678 Jy/beam
! Clean residual mean=-0.000002 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.118822 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00023167 Jy
! Component: 100  -  total flux cleaned = 0.000329443 Jy
! Component: 150  -  total flux cleaned = 0.000398835 Jy
! Component: 200  -  total flux cleaned = 0.000462351 Jy
! Total flux subtracted in 200 components = 0.000462351 Jy
! Clean residual min=-0.001377 max=0.001662 Jy/beam
! Clean residual mean=-0.000002 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.119285 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 68 components and 0.119285 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.631 mas, bmaj=4.493 mas, bpa=-1.35 degrees
! Estimated noise=16.635 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000170119 Jy
! Component: 100  -  total flux cleaned = -0.00014072 Jy
! Component: 150  -  total flux cleaned = -0.000163585 Jy
! Component: 200  -  total flux cleaned = -0.00014254 Jy
! Total flux subtracted in 200 components = -0.00014254 Jy
! Clean residual min=-0.001168 max=0.001435 Jy/beam
! Clean residual mean=-0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.119142 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 84 components and 0.119142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027761Jy  sigma=0.019104
! Fit after  self-cal, rms=0.027758Jy  sigma=0.019101
wmodel /scr/pima/bp171a7_uvs/J1251-1927_C_map.mod
! Writing 84 model components to file: /scr/pima/bp171a7_uvs/J1251-1927_C_map.mod
wobs /scr/pima/bp171a7_uvs/J1251-1927_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1251-1927_C_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1251-1927_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a7_uvs/J1251-1927_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000477685 Jy
! Component: 100  -  total flux cleaned = 0.000712096 Jy
! Component: 150  -  total flux cleaned = 0.000891061 Jy
! Component: 200  -  total flux cleaned = 0.00104247 Jy
! Component: 250  -  total flux cleaned = 0.00116981 Jy
! Component: 300  -  total flux cleaned = 0.00132639 Jy
! Component: 350  -  total flux cleaned = 0.00140958 Jy
! Component: 400  -  total flux cleaned = 0.00147401 Jy
! Component: 450  -  total flux cleaned = 0.00155248 Jy
! Component: 500  -  total flux cleaned = 0.00159796 Jy
! Component: 550  -  total flux cleaned = 0.00164195 Jy
! Component: 600  -  total flux cleaned = 0.00165596 Jy
! Component: 650  -  total flux cleaned = 0.00165594 Jy
! Component: 700  -  total flux cleaned = 0.00168309 Jy
! Component: 750  -  total flux cleaned = 0.00169633 Jy
! Component: 800  -  total flux cleaned = 0.00170905 Jy
! Component: 850  -  total flux cleaned = 0.00170882 Jy
! Component: 900  -  total flux cleaned = 0.00168443 Jy
! Component: 950  -  total flux cleaned = 0.00167249 Jy
! Component: 1000  -  total flux cleaned = 0.00167272 Jy
! Component: 1050  -  total flux cleaned = 0.0016729 Jy
! Component: 1100  -  total flux cleaned = 0.00162857 Jy
! Component: 1150  -  total flux cleaned = 0.00163997 Jy
! Component: 1200  -  total flux cleaned = 0.00165081 Jy
! Component: 1250  -  total flux cleaned = 0.00165055 Jy
! Component: 1300  -  total flux cleaned = 0.00165039 Jy
! Component: 1350  -  total flux cleaned = 0.00164004 Jy
! Component: 1400  -  total flux cleaned = 0.0016102 Jy
! Component: 1450  -  total flux cleaned = 0.00163951 Jy
! Component: 1500  -  total flux cleaned = 0.00167791 Jy
! Component: 1550  -  total flux cleaned = 0.0016968 Jy
! Component: 1600  -  total flux cleaned = 0.00169666 Jy
! Component: 1650  -  total flux cleaned = 0.00167818 Jy
! Component: 1700  -  total flux cleaned = 0.00167819 Jy
! Component: 1750  -  total flux cleaned = 0.00166021 Jy
! Component: 1800  -  total flux cleaned = 0.00165154 Jy
! Component: 1850  -  total flux cleaned = 0.00166918 Jy
! Component: 1900  -  total flux cleaned = 0.00169502 Jy
! Component: 1950  -  total flux cleaned = 0.001695 Jy
! Component: 2000  -  total flux cleaned = 0.00172842 Jy
! Component: 2050  -  total flux cleaned = 0.00171185 Jy
! Component: 2100  -  total flux cleaned = 0.00171994 Jy
! Component: 2150  -  total flux cleaned = 0.00171998 Jy
! Component: 2200  -  total flux cleaned = 0.0017201 Jy
! Component: 2250  -  total flux cleaned = 0.00169671 Jy
! Component: 2300  -  total flux cleaned = 0.00171233 Jy
! Component: 2350  -  total flux cleaned = 0.00170458 Jy
! Component: 2400  -  total flux cleaned = 0.00170454 Jy
! Component: 2450  -  total flux cleaned = 0.00168196 Jy
! Component: 2500  -  total flux cleaned = 0.00166701 Jy
! Component: 2550  -  total flux cleaned = 0.00166699 Jy
! Component: 2600  -  total flux cleaned = 0.00163767 Jy
! Component: 2650  -  total flux cleaned = 0.0016088 Jy
! Component: 2700  -  total flux cleaned = 0.00160876 Jy
! Component: 2750  -  total flux cleaned = 0.00158731 Jy
! Component: 2800  -  total flux cleaned = 0.00155918 Jy
! Component: 2850  -  total flux cleaned = 0.00155225 Jy
! Component: 2900  -  total flux cleaned = 0.00154527 Jy
! Component: 2950  -  total flux cleaned = 0.00155214 Jy
! Component: 3000  -  total flux cleaned = 0.00154538 Jy
! Component: 3050  -  total flux cleaned = 0.00152515 Jy
! Component: 3100  -  total flux cleaned = 0.00152515 Jy
! Component: 3150  -  total flux cleaned = 0.00151858 Jy
! Component: 3200  -  total flux cleaned = 0.00150546 Jy
! Component: 3250  -  total flux cleaned = 0.00151196 Jy
! Component: 3300  -  total flux cleaned = 0.00151198 Jy
! Component: 3350  -  total flux cleaned = 0.00151196 Jy
! Component: 3400  -  total flux cleaned = 0.00152475 Jy
! Component: 3450  -  total flux cleaned = 0.00153742 Jy
! Component: 3500  -  total flux cleaned = 0.00154374 Jy
! Component: 3550  -  total flux cleaned = 0.00156244 Jy
! Component: 3600  -  total flux cleaned = 0.00156863 Jy
! Component: 3650  -  total flux cleaned = 0.00156249 Jy
! Component: 3700  -  total flux cleaned = 0.00158697 Jy
! Component: 3750  -  total flux cleaned = 0.00160516 Jy
! Component: 3800  -  total flux cleaned = 0.0015871 Jy
! Component: 3850  -  total flux cleaned = 0.00158715 Jy
! Component: 3900  -  total flux cleaned = 0.00159908 Jy
! Component: 3950  -  total flux cleaned = 0.00161096 Jy
! Component: 4000  -  total flux cleaned = 0.00161095 Jy
! Component: 4050  -  total flux cleaned = 0.00161682 Jy
! Total flux subtracted in 4096 components = 0.00164013 Jy
! Clean residual min=-0.000325 max=0.000385 Jy/beam
! Clean residual mean=-0.000000 rms=0.000100 Jy/beam
! Combined flux in latest and established models = 0.120782 Jy
keep
! Adding 293 model components to the UV plane model.
! The established model now contains 377 components and 0.120782 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1251-1927_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.631 x 4.493 at -1.35 degrees (North through East)
! Clean map  min=-0.00087235  max=0.069708 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1251-1927_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0697081 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.84136e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.423538 0.423538 0.847077 1.69415 3.38831 6.77661 13.5532 27.1065 54.2129
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.069 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1251-1927_C_uvs.log closed on Sun May 12 14:53:48 2013