! Started logfile: /scr/pima/bp171a7_uvs/J1203+1118_X_uvs.log on Sun May 12 14:03:55 2013
obs /scr/pima/bp171a7_uvs/J1203+1118_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1203+1118_X_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.761905 visibilities/baseline/integration-bin.
! Found source: J1203+1118
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3072 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1203+1118_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.020981Jy  sigma=0.721760
! Fit after  self-cal, rms=0.878433Jy  sigma=0.620982
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7562 mas, bmaj=2.22 mas, bpa=2.696 degrees
! Estimated noise=28.8542 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0871982 Jy
! Component: 100  -  total flux cleaned = 0.113674 Jy
! Total flux subtracted in 100 components = 0.113674 Jy
! Clean residual min=-0.006934 max=0.012033 Jy/beam
! Clean residual mean=-0.000011 rms=0.001844 Jy/beam
! Combined flux in latest and established models = 0.113674 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.113674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035744Jy  sigma=0.025264
! Fit after  self-cal, rms=0.035731Jy  sigma=0.025255
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133386 Jy
! Component: 100  -  total flux cleaned = 0.0204908 Jy
! Total flux subtracted in 100 components = 0.0204908 Jy
! Clean residual min=-0.005343 max=0.005562 Jy/beam
! Clean residual mean=-0.000007 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.134165 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 16 components and 0.134165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029377Jy  sigma=0.020761
! Fit after  self-cal, rms=0.029367Jy  sigma=0.020754
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.955 mas, bmaj=2.694 mas, bpa=0.5799 degrees
! Estimated noise=18.0469 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00505831 Jy
! Component: 100  -  total flux cleaned = 0.00795317 Jy
! Component: 150  -  total flux cleaned = 0.00970076 Jy
! Component: 200  -  total flux cleaned = 0.0107315 Jy
! Total flux subtracted in 200 components = 0.0107315 Jy
! Clean residual min=-0.004484 max=0.003934 Jy/beam
! Clean residual mean=-0.000011 rms=0.000952 Jy/beam
! Combined flux in latest and established models = 0.144896 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 31 components and 0.144896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028474Jy  sigma=0.020122
! Fit after  self-cal, rms=0.028472Jy  sigma=0.020121
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.17     HN        0.92     KP        0.96     LA        0.99     
!   MK        1.01     NL        1.01     OV        1.06     PT        0.88     
!   SC        0.93     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        0.89     KP        0.96     LA        0.97     
!   MK        1.06     NL        1.05     OV        0.99     PT        0.91     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.14     HN        0.93     KP        1.06     LA        0.92     
!   MK        1.09     NL        1.03     OV        1.04     PT        0.94     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.13     HN        0.99     KP        0.94     LA        0.99     
!   MK        1.08     NL        0.98     OV        1.02     PT        0.97     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        0.95     KP        1.06     LA        0.97     
!   MK        1.07     NL        0.93     OV        0.98     PT        0.89     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        1.03     KP        1.02     LA        1.00     
!   MK        1.07     NL        0.99     OV        1.07     PT        0.93     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        0.94     KP        1.04     LA        0.92     
!   MK        1.05     NL        1.06     OV        1.07     PT        0.93     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     HN        1.00     KP        1.08     LA        0.92     
!   MK        1.06     NL        1.00     OV        1.08     PT        0.87     
!   SC        1.18     
! 
! 
! Fit before self-cal, rms=0.028472Jy  sigma=0.020121
! Fit after  self-cal, rms=0.026275Jy  sigma=0.018521
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9623 mas, bmaj=2.697 mas, bpa=0.7142 degrees
! Estimated noise=18.2381 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000411728 Jy
! Component: 100  -  total flux cleaned = -0.000490287 Jy
! Component: 150  -  total flux cleaned = -0.000517248 Jy
! Component: 200  -  total flux cleaned = -0.000552126 Jy
! Total flux subtracted in 200 components = -0.000552126 Jy
! Clean residual min=-0.001504 max=0.001587 Jy/beam
! Clean residual mean=-0.000002 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.144344 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 36 components and 0.144344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026257Jy  sigma=0.018509
! Fit after  self-cal, rms=0.026277Jy  sigma=0.018503
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026277Jy  sigma=0.018503
! Fit after  self-cal, rms=0.026300Jy  sigma=0.018501
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9637 mas, bmaj=2.699 mas, bpa=0.7322 degrees
! Estimated noise=18.2453 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000299912 Jy
! Component: 100  -  total flux cleaned = -0.000337178 Jy
! Component: 150  -  total flux cleaned = -0.000369097 Jy
! Component: 200  -  total flux cleaned = -0.000387912 Jy
! Total flux subtracted in 200 components = -0.000387912 Jy
! Clean residual min=-0.001486 max=0.001601 Jy/beam
! Clean residual mean=-0.000002 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.143956 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 41 components and 0.143956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026289Jy  sigma=0.018494
! Fit after  self-cal, rms=0.026288Jy  sigma=0.018493
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-19, 16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014091 Jy
! Component: 100  -  total flux cleaned = 0.0021392 Jy
! Component: 150  -  total flux cleaned = 0.00247452 Jy
! Component: 200  -  total flux cleaned = 0.00260638 Jy
! Total flux subtracted in 200 components = 0.00260638 Jy
! Clean residual min=-0.001258 max=0.001255 Jy/beam
! Clean residual mean=0.000000 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.146563 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 59 components and 0.146563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026211Jy  sigma=0.018437
! Fit after  self-cal, rms=0.026209Jy  sigma=0.018435
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026209Jy  sigma=0.018435
! Fit after  self-cal, rms=0.026197Jy  sigma=0.018431
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9648 mas, bmaj=2.7 mas, bpa=0.7749 degrees
! Estimated noise=18.2334 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.37591e-05 Jy
! Component: 100  -  total flux cleaned = 0.000145015 Jy
! Component: 150  -  total flux cleaned = 0.000157009 Jy
! Component: 200  -  total flux cleaned = 0.000180513 Jy
! Total flux subtracted in 200 components = 0.000180513 Jy
! Clean residual min=-0.001234 max=0.001185 Jy/beam
! Clean residual mean=0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.146743 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 66 components and 0.146743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026183Jy  sigma=0.018422
! Fit after  self-cal, rms=0.026184Jy  sigma=0.018422
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.02262e-05 Jy
! Component: 100  -  total flux cleaned = -9.26351e-06 Jy
! Component: 150  -  total flux cleaned = -3.009e-07 Jy
! Component: 200  -  total flux cleaned = -2.32366e-07 Jy
! Total flux subtracted in 200 components = -2.32366e-07 Jy
! Clean residual min=-0.001206 max=0.001164 Jy/beam
! Clean residual mean=0.000001 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.146743 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 71 components and 0.146743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026177Jy  sigma=0.018417
! Fit after  self-cal, rms=0.026177Jy  sigma=0.018417
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026177Jy  sigma=0.018417
! Fit after  self-cal, rms=0.026183Jy  sigma=0.018416
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.032 mas, bmaj=4.526 mas, bpa=-7.688 degrees
! Estimated noise=23.1349 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000165457 Jy
! Component: 100  -  total flux cleaned = -0.00029562 Jy
! Component: 150  -  total flux cleaned = -0.000417134 Jy
! Component: 200  -  total flux cleaned = -0.00047204 Jy
! Total flux subtracted in 200 components = -0.00047204 Jy
! Clean residual min=-0.001210 max=0.001278 Jy/beam
! Clean residual mean=0.000001 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.146271 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 84 components and 0.146271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026181Jy  sigma=0.018415
! Fit after  self-cal, rms=0.026177Jy  sigma=0.018412
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.19486e-05 Jy
! Component: 100  -  total flux cleaned = 2.34746e-05 Jy
! Component: 150  -  total flux cleaned = -2.83806e-05 Jy
! Component: 200  -  total flux cleaned = -7.70603e-05 Jy
! Total flux subtracted in 200 components = -7.70603e-05 Jy
! Clean residual min=-0.001190 max=0.001249 Jy/beam
! Clean residual mean=0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.146194 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 90 components and 0.146194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026179Jy  sigma=0.018414
! Fit after  self-cal, rms=0.026176Jy  sigma=0.018411
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9655 mas, bmaj=2.701 mas, bpa=0.7876 degrees
! Estimated noise=18.2331 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9655 x 2.701 at 0.7876 degrees (North through East)
! Clean map  min=-0.0011035  max=0.11836 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.767 mas, bmaj=2.232 mas, bpa=2.726 degrees
! Estimated noise=29.2025 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0880243 Jy
! Component: 100  -  total flux cleaned = 0.113766 Jy
! Component: 150  -  total flux cleaned = 0.126438 Jy
! Component: 200  -  total flux cleaned = 0.133183 Jy
! Total flux subtracted in 200 components = 0.133183 Jy
! Clean residual min=-0.003031 max=0.003726 Jy/beam
! Clean residual mean=-0.000003 rms=0.000772 Jy/beam
! Combined flux in latest and established models = 0.133183 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.133183 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9655 mas, bmaj=2.701 mas, bpa=0.7876 degrees
! Estimated noise=18.2331 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00466223 Jy
! Component: 100  -  total flux cleaned = 0.00696394 Jy
! Component: 150  -  total flux cleaned = 0.00850985 Jy
! Component: 200  -  total flux cleaned = 0.0096395 Jy
! Total flux subtracted in 200 components = 0.0096395 Jy
! Clean residual min=-0.001496 max=0.001401 Jy/beam
! Clean residual mean=-0.000001 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.142823 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 36 components and 0.142823 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.032 mas, bmaj=4.526 mas, bpa=-7.688 degrees
! Estimated noise=23.1349 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118516 Jy
! Component: 100  -  total flux cleaned = 0.00176503 Jy
! Component: 150  -  total flux cleaned = 0.00200245 Jy
! Component: 200  -  total flux cleaned = 0.00210756 Jy
! Total flux subtracted in 200 components = 0.00210756 Jy
! Clean residual min=-0.001309 max=0.001336 Jy/beam
! Clean residual mean=-0.000001 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.14493 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.88944e-05 Jy
! Component: 100  -  total flux cleaned = 8.0812e-05 Jy
! Component: 150  -  total flux cleaned = 0.000101419 Jy
! Component: 200  -  total flux cleaned = 0.000111171 Jy
! Total flux subtracted in 200 components = 0.000111171 Jy
! Clean residual min=-0.001281 max=0.001313 Jy/beam
! Clean residual mean=-0.000000 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.145042 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 49 components and 0.145042 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9655 mas, bmaj=2.701 mas, bpa=0.7876 degrees
! Estimated noise=18.2331 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000275119 Jy
! Component: 100  -  total flux cleaned = 0.000413275 Jy
! Component: 150  -  total flux cleaned = 0.000474906 Jy
! Component: 200  -  total flux cleaned = 0.000531509 Jy
! Total flux subtracted in 200 components = 0.000531509 Jy
! Clean residual min=-0.001289 max=0.001227 Jy/beam
! Clean residual mean=0.000000 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.145573 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 61 components and 0.145573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026242Jy  sigma=0.018450
! Fit after  self-cal, rms=0.026236Jy  sigma=0.018446
wmodel /scr/pima/bp171a7_uvs/J1203+1118_X_map.mod
! Writing 61 model components to file: /scr/pima/bp171a7_uvs/J1203+1118_X_map.mod
wobs /scr/pima/bp171a7_uvs/J1203+1118_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1203+1118_X_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1203+1118_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a7_uvs/J1203+1118_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -2.86441e-05 Jy
! Component: 100  -  total flux cleaned = 3.56278e-05 Jy
! Component: 150  -  total flux cleaned = 5.64055e-05 Jy
! Component: 200  -  total flux cleaned = 7.53718e-05 Jy
! Component: 250  -  total flux cleaned = 3.99511e-05 Jy
! Component: 300  -  total flux cleaned = 7.3458e-05 Jy
! Component: 350  -  total flux cleaned = 4.17028e-05 Jy
! Component: 400  -  total flux cleaned = -3.62524e-06 Jy
! Component: 450  -  total flux cleaned = -1.79087e-05 Jy
! Component: 500  -  total flux cleaned = -6.03497e-05 Jy
! Component: 550  -  total flux cleaned = -0.000129345 Jy
! Component: 600  -  total flux cleaned = -0.000182778 Jy
! Component: 650  -  total flux cleaned = -0.000247967 Jy
! Component: 700  -  total flux cleaned = -0.000324242 Jy
! Component: 750  -  total flux cleaned = -0.000373803 Jy
! Component: 800  -  total flux cleaned = -0.000421759 Jy
! Component: 850  -  total flux cleaned = -0.000445184 Jy
! Component: 900  -  total flux cleaned = -0.000468135 Jy
! Component: 950  -  total flux cleaned = -0.000501743 Jy
! Component: 1000  -  total flux cleaned = -0.000534679 Jy
! Component: 1050  -  total flux cleaned = -0.00055615 Jy
! Component: 1100  -  total flux cleaned = -0.000598276 Jy
! Component: 1150  -  total flux cleaned = -0.00059811 Jy
! Component: 1200  -  total flux cleaned = -0.000577935 Jy
! Component: 1250  -  total flux cleaned = -0.000617832 Jy
! Component: 1300  -  total flux cleaned = -0.00058813 Jy
! Component: 1350  -  total flux cleaned = -0.000559196 Jy
! Component: 1400  -  total flux cleaned = -0.000559401 Jy
! Component: 1450  -  total flux cleaned = -0.000568676 Jy
! Component: 1500  -  total flux cleaned = -0.000568648 Jy
! Component: 1550  -  total flux cleaned = -0.000550343 Jy
! Component: 1600  -  total flux cleaned = -0.000559383 Jy
! Component: 1650  -  total flux cleaned = -0.000532764 Jy
! Component: 1700  -  total flux cleaned = -0.000541719 Jy
! Component: 1750  -  total flux cleaned = -0.000541617 Jy
! Component: 1800  -  total flux cleaned = -0.000541515 Jy
! Component: 1850  -  total flux cleaned = -0.000558271 Jy
! Component: 1900  -  total flux cleaned = -0.000558144 Jy
! Component: 1950  -  total flux cleaned = -0.000549766 Jy
! Component: 2000  -  total flux cleaned = -0.000574255 Jy
! Component: 2050  -  total flux cleaned = -0.000574267 Jy
! Component: 2100  -  total flux cleaned = -0.000590146 Jy
! Component: 2150  -  total flux cleaned = -0.000613781 Jy
! Component: 2200  -  total flux cleaned = -0.000590307 Jy
! Component: 2250  -  total flux cleaned = -0.000598037 Jy
! Component: 2300  -  total flux cleaned = -0.00058269 Jy
! Component: 2350  -  total flux cleaned = -0.000567555 Jy
! Component: 2400  -  total flux cleaned = -0.000567571 Jy
! Component: 2450  -  total flux cleaned = -0.000567544 Jy
! Component: 2500  -  total flux cleaned = -0.000560122 Jy
! Component: 2550  -  total flux cleaned = -0.000560123 Jy
! Component: 2600  -  total flux cleaned = -0.000538397 Jy
! Component: 2650  -  total flux cleaned = -0.000531085 Jy
! Component: 2700  -  total flux cleaned = -0.000474417 Jy
! Component: 2750  -  total flux cleaned = -0.00046036 Jy
! Component: 2800  -  total flux cleaned = -0.000432521 Jy
! Component: 2850  -  total flux cleaned = -0.000425632 Jy
! Component: 2900  -  total flux cleaned = -0.000439263 Jy
! Component: 2950  -  total flux cleaned = -0.000398528 Jy
! Component: 3000  -  total flux cleaned = -0.000398515 Jy
! Component: 3050  -  total flux cleaned = -0.000371902 Jy
! Component: 3100  -  total flux cleaned = -0.000391669 Jy
! Component: 3150  -  total flux cleaned = -0.000365517 Jy
! Component: 3200  -  total flux cleaned = -0.000365448 Jy
! Component: 3250  -  total flux cleaned = -0.000359034 Jy
! Component: 3300  -  total flux cleaned = -0.000333485 Jy
! Component: 3350  -  total flux cleaned = -0.000333537 Jy
! Component: 3400  -  total flux cleaned = -0.000308377 Jy
! Component: 3450  -  total flux cleaned = -0.000308391 Jy
! Component: 3500  -  total flux cleaned = -0.000271143 Jy
! Component: 3550  -  total flux cleaned = -0.000246549 Jy
! Component: 3600  -  total flux cleaned = -0.000228162 Jy
! Component: 3650  -  total flux cleaned = -0.00021604 Jy
! Component: 3700  -  total flux cleaned = -0.000216041 Jy
! Component: 3750  -  total flux cleaned = -0.000185971 Jy
! Component: 3800  -  total flux cleaned = -0.000168052 Jy
! Component: 3850  -  total flux cleaned = -0.000168043 Jy
! Component: 3900  -  total flux cleaned = -0.000167982 Jy
! Component: 3950  -  total flux cleaned = -0.000162047 Jy
! Component: 4000  -  total flux cleaned = -0.000132746 Jy
! Component: 4050  -  total flux cleaned = -0.000121077 Jy
! Total flux subtracted in 4096 components = -9.78739e-05 Jy
! Clean residual min=-0.000399 max=0.000326 Jy/beam
! Clean residual mean=0.000000 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.145475 Jy
keep
! Adding 262 model components to the UV plane model.
! The established model now contains 323 components and 0.145475 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1203+1118_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9655 x 2.701 at 0.7876 degrees (North through East)
! Clean map  min=-0.00079675  max=0.12058 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1203+1118_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.12058 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.66959e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.240578 0.240578 0.481155 0.96231 1.92462 3.84924 7.69848 15.397 30.7939 61.5879
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.12 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1203+1118_X_uvs.log closed on Sun May 12 14:03:59 2013