! Started logfile: /scr/pima/bp171a7_uvs/J1203+1118_C_uvs.log on Sun May 12 14:53:27 2013
obs /scr/pima/bp171a7_uvs/J1203+1118_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1203+1118_C_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.761905 visibilities/baseline/integration-bin.
! Found source: J1203+1118
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3072 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1203+1118_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.995001Jy  sigma=0.703388
! Fit after  self-cal, rms=0.872398Jy  sigma=0.616718
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.299 mas, bmaj=3.805 mas, bpa=3.206 degrees
! Estimated noise=28.0704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0951976 Jy
! Component: 100  -  total flux cleaned = 0.117205 Jy
! Total flux subtracted in 100 components = 0.117205 Jy
! Clean residual min=-0.004310 max=0.008549 Jy/beam
! Clean residual mean=-0.000006 rms=0.001206 Jy/beam
! Combined flux in latest and established models = 0.117205 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.117205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029777Jy  sigma=0.021044
! Fit after  self-cal, rms=0.029770Jy  sigma=0.021039
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00928276 Jy
! Component: 100  -  total flux cleaned = 0.0142652 Jy
! Total flux subtracted in 100 components = 0.0142652 Jy
! Clean residual min=-0.002837 max=0.003529 Jy/beam
! Clean residual mean=-0.000002 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.13147 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.13147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025819Jy  sigma=0.018245
! Fit after  self-cal, rms=0.025815Jy  sigma=0.018242
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.672 mas, bmaj=4.718 mas, bpa=0.5799 degrees
! Estimated noise=18.0469 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00401091 Jy
! Component: 100  -  total flux cleaned = 0.00604064 Jy
! Component: 150  -  total flux cleaned = 0.00719803 Jy
! Component: 200  -  total flux cleaned = 0.00788513 Jy
! Total flux subtracted in 200 components = 0.00788513 Jy
! Clean residual min=-0.002580 max=0.003170 Jy/beam
! Clean residual mean=0.000003 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.139355 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 32 components and 0.139355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025224Jy  sigma=0.017824
! Fit after  self-cal, rms=0.025222Jy  sigma=0.017823
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        0.93     KP        0.92     LA        1.02     
!   MK        1.11     NL        1.04     OV        0.97     PT        0.91     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     HN        0.96     KP        0.94     LA        1.07     
!   MK        1.01     NL        1.05     OV        1.05     PT        1.04     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        0.95     KP        0.98     LA        1.04     
!   MK        1.07     NL        1.09     OV        0.96     PT        0.94     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     HN        0.93     KP        0.97     LA        1.05     
!   MK        1.07     NL        0.99     OV        0.93     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        0.96     KP        0.99     LA        1.11     
!   MK        1.02     NL        0.98     OV        0.93     PT        0.91     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        0.96     KP        0.98     LA        1.17     
!   MK        1.03     NL        0.96     OV        0.96     PT        1.03     
!   SC        1.08     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     HN        0.92     KP        0.93     LA        1.07     
!   MK        1.02     NL        0.98     OV        0.97     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        0.90     KP        0.98     LA        1.06     
!   MK        1.03     NL        1.00     OV        0.97     PT        0.94     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.025222Jy  sigma=0.017823
! Fit after  self-cal, rms=0.023033Jy  sigma=0.016294
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.678 mas, bmaj=4.711 mas, bpa=0.6535 degrees
! Estimated noise=18.0922 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000238039 Jy
! Component: 100  -  total flux cleaned = -0.000276945 Jy
! Component: 150  -  total flux cleaned = -0.000270094 Jy
! Component: 200  -  total flux cleaned = -0.000270221 Jy
! Total flux subtracted in 200 components = -0.000270221 Jy
! Clean residual min=-0.001308 max=0.001067 Jy/beam
! Clean residual mean=-0.000000 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.139085 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 42 components and 0.139085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023028Jy  sigma=0.016291
! Fit after  self-cal, rms=0.023040Jy  sigma=0.016288
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023040Jy  sigma=0.016288
! Fit after  self-cal, rms=0.023033Jy  sigma=0.016287
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.679 mas, bmaj=4.712 mas, bpa=0.6745 degrees
! Estimated noise=18.0841 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000204981 Jy
! Component: 100  -  total flux cleaned = -0.000238542 Jy
! Component: 150  -  total flux cleaned = -0.000250377 Jy
! Component: 200  -  total flux cleaned = -0.000250516 Jy
! Total flux subtracted in 200 components = -0.000250516 Jy
! Clean residual min=-0.001308 max=0.001061 Jy/beam
! Clean residual mean=-0.000000 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.138834 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 44 components and 0.138834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023029Jy  sigma=0.016285
! Fit after  self-cal, rms=0.023029Jy  sigma=0.016285
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.82129e-06 Jy
! Component: 100  -  total flux cleaned = 2.39262e-07 Jy
! Component: 150  -  total flux cleaned = 2.31191e-07 Jy
! Component: 200  -  total flux cleaned = 2.01706e-07 Jy
! Total flux subtracted in 200 components = 2.01706e-07 Jy
! Clean residual min=-0.001304 max=0.001061 Jy/beam
! Clean residual mean=-0.000000 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.138835 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 0.138835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023027Jy  sigma=0.016284
! Fit after  self-cal, rms=0.023028Jy  sigma=0.016284
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023028Jy  sigma=0.016284
! Fit after  self-cal, rms=0.023025Jy  sigma=0.016283
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.68 mas, bmaj=4.713 mas, bpa=0.7005 degrees
! Estimated noise=18.0802 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000166104 Jy
! Component: 100  -  total flux cleaned = -0.000192152 Jy
! Component: 150  -  total flux cleaned = -0.000209429 Jy
! Component: 200  -  total flux cleaned = -0.000220872 Jy
! Total flux subtracted in 200 components = -0.000220872 Jy
! Clean residual min=-0.001302 max=0.001057 Jy/beam
! Clean residual mean=-0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.138614 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 46 components and 0.138614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023023Jy  sigma=0.016281
! Fit after  self-cal, rms=0.023023Jy  sigma=0.016281
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.00188e-07 Jy
! Component: 100  -  total flux cleaned = -7.43232e-06 Jy
! Component: 150  -  total flux cleaned = -1.05591e-05 Jy
! Component: 200  -  total flux cleaned = -1.05645e-05 Jy
! Total flux subtracted in 200 components = -1.05645e-05 Jy
! Clean residual min=-0.001302 max=0.001063 Jy/beam
! Clean residual mean=-0.000000 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.138603 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 48 components and 0.138603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023022Jy  sigma=0.016281
! Fit after  self-cal, rms=0.023022Jy  sigma=0.016281
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023022Jy  sigma=0.016281
! Fit after  self-cal, rms=0.023021Jy  sigma=0.016280
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.535 mas, bmaj=7.811 mas, bpa=-7.471 degrees
! Estimated noise=23.1188 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.07774e-05 Jy
! Component: 100  -  total flux cleaned = 2.21692e-05 Jy
! Component: 150  -  total flux cleaned = 7.39012e-06 Jy
! Component: 200  -  total flux cleaned = -4.39779e-06 Jy
! Total flux subtracted in 200 components = -4.39779e-06 Jy
! Clean residual min=-0.001507 max=0.001341 Jy/beam
! Clean residual mean=-0.000001 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.138599 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 55 components and 0.138599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023024Jy  sigma=0.016282
! Fit after  self-cal, rms=0.023022Jy  sigma=0.016280
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.34728e-07 Jy
! Component: 100  -  total flux cleaned = -7.07283e-06 Jy
! Component: 150  -  total flux cleaned = -1.93955e-05 Jy
! Component: 200  -  total flux cleaned = -2.96495e-05 Jy
! Total flux subtracted in 200 components = -2.96495e-05 Jy
! Clean residual min=-0.001502 max=0.001337 Jy/beam
! Clean residual mean=-0.000001 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.138569 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 56 components and 0.138569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023025Jy  sigma=0.016283
! Fit after  self-cal, rms=0.023023Jy  sigma=0.016281
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.681 mas, bmaj=4.714 mas, bpa=0.7256 degrees
! Estimated noise=18.0773 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.681 x 4.714 at 0.7256 degrees (North through East)
! Clean map  min=-0.0012439  max=0.12654 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.31 mas, bmaj=3.804 mas, bpa=3.1 degrees
! Estimated noise=28.0311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0949399 Jy
! Component: 100  -  total flux cleaned = 0.116377 Jy
! Component: 150  -  total flux cleaned = 0.124832 Jy
! Component: 200  -  total flux cleaned = 0.129322 Jy
! Total flux subtracted in 200 components = 0.129322 Jy
! Clean residual min=-0.001965 max=0.002252 Jy/beam
! Clean residual mean=-0.000003 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.129322 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.129322 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.681 mas, bmaj=4.714 mas, bpa=0.7256 degrees
! Estimated noise=18.0773 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00428153 Jy
! Component: 100  -  total flux cleaned = 0.0063722 Jy
! Component: 150  -  total flux cleaned = 0.00751534 Jy
! Component: 200  -  total flux cleaned = 0.00817751 Jy
! Total flux subtracted in 200 components = 0.00817751 Jy
! Clean residual min=-0.001315 max=0.001090 Jy/beam
! Clean residual mean=-0.000001 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.1375 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 37 components and 0.1375 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.535 mas, bmaj=7.811 mas, bpa=-7.471 degrees
! Estimated noise=23.1188 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000758224 Jy
! Component: 100  -  total flux cleaned = 0.000956659 Jy
! Component: 150  -  total flux cleaned = 0.00096248 Jy
! Component: 200  -  total flux cleaned = 0.000967101 Jy
! Total flux subtracted in 200 components = 0.000967101 Jy
! Clean residual min=-0.001508 max=0.001325 Jy/beam
! Clean residual mean=-0.000001 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.138467 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.62103e-06 Jy
! Component: 100  -  total flux cleaned = 7.47216e-06 Jy
! Component: 150  -  total flux cleaned = 7.42071e-06 Jy
! Component: 200  -  total flux cleaned = 7.75207e-06 Jy
! Total flux subtracted in 200 components = 7.75207e-06 Jy
! Clean residual min=-0.001500 max=0.001320 Jy/beam
! Clean residual mean=-0.000001 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.138474 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 46 components and 0.138474 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.681 mas, bmaj=4.714 mas, bpa=0.7256 degrees
! Estimated noise=18.0773 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000203011 Jy
! Component: 100  -  total flux cleaned = -0.000140891 Jy
! Component: 150  -  total flux cleaned = -0.000117486 Jy
! Component: 200  -  total flux cleaned = -0.000116975 Jy
! Total flux subtracted in 200 components = -0.000116975 Jy
! Clean residual min=-0.001299 max=0.001048 Jy/beam
! Clean residual mean=-0.000000 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.138358 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 53 components and 0.138358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023020Jy  sigma=0.016279
! Fit after  self-cal, rms=0.023019Jy  sigma=0.016279
wmodel /scr/pima/bp171a7_uvs/J1203+1118_C_map.mod
! Writing 53 model components to file: /scr/pima/bp171a7_uvs/J1203+1118_C_map.mod
wobs /scr/pima/bp171a7_uvs/J1203+1118_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1203+1118_C_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1203+1118_C_map.win
! wwins: Wrote 1 windows to /scr/pima/bp171a7_uvs/J1203+1118_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000488929 Jy
! Component: 100  -  total flux cleaned = -0.000625847 Jy
! Component: 150  -  total flux cleaned = -0.000625617 Jy
! Component: 200  -  total flux cleaned = -0.00064225 Jy
! Component: 250  -  total flux cleaned = -0.000577514 Jy
! Component: 300  -  total flux cleaned = -0.000514998 Jy
! Component: 350  -  total flux cleaned = -0.000439927 Jy
! Component: 400  -  total flux cleaned = -0.000410814 Jy
! Component: 450  -  total flux cleaned = -0.000410475 Jy
! Component: 500  -  total flux cleaned = -0.000438021 Jy
! Component: 550  -  total flux cleaned = -0.000437907 Jy
! Component: 600  -  total flux cleaned = -0.000424486 Jy
! Component: 650  -  total flux cleaned = -0.000398986 Jy
! Component: 700  -  total flux cleaned = -0.000398797 Jy
! Component: 750  -  total flux cleaned = -0.000349808 Jy
! Component: 800  -  total flux cleaned = -0.000349587 Jy
! Component: 850  -  total flux cleaned = -0.000349567 Jy
! Component: 900  -  total flux cleaned = -0.00033822 Jy
! Component: 950  -  total flux cleaned = -0.000349647 Jy
! Component: 1000  -  total flux cleaned = -0.000349563 Jy
! Component: 1050  -  total flux cleaned = -0.000316715 Jy
! Component: 1100  -  total flux cleaned = -0.00030617 Jy
! Component: 1150  -  total flux cleaned = -0.000316489 Jy
! Component: 1200  -  total flux cleaned = -0.000285257 Jy
! Component: 1250  -  total flux cleaned = -0.000264856 Jy
! Component: 1300  -  total flux cleaned = -0.000254705 Jy
! Component: 1350  -  total flux cleaned = -0.000244944 Jy
! Component: 1400  -  total flux cleaned = -0.000225631 Jy
! Component: 1450  -  total flux cleaned = -0.00021612 Jy
! Component: 1500  -  total flux cleaned = -0.000225676 Jy
! Component: 1550  -  total flux cleaned = -0.000169397 Jy
! Component: 1600  -  total flux cleaned = -0.000169468 Jy
! Component: 1650  -  total flux cleaned = -0.000141883 Jy
! Component: 1700  -  total flux cleaned = -0.000123702 Jy
! Component: 1750  -  total flux cleaned = -0.000123804 Jy
! Component: 1800  -  total flux cleaned = -0.000123707 Jy
! Component: 1850  -  total flux cleaned = -9.73335e-05 Jy
! Component: 1900  -  total flux cleaned = -9.72316e-05 Jy
! Component: 1950  -  total flux cleaned = -0.000122985 Jy
! Component: 2000  -  total flux cleaned = -8.89845e-05 Jy
! Component: 2050  -  total flux cleaned = -8.05235e-05 Jy
! Component: 2100  -  total flux cleaned = -8.04632e-05 Jy
! Component: 2150  -  total flux cleaned = -8.04406e-05 Jy
! Component: 2200  -  total flux cleaned = -8.85384e-05 Jy
! Component: 2250  -  total flux cleaned = -6.41526e-05 Jy
! Component: 2300  -  total flux cleaned = -4.0039e-05 Jy
! Component: 2350  -  total flux cleaned = -6.38251e-05 Jy
! Component: 2400  -  total flux cleaned = -4.00576e-05 Jy
! Component: 2450  -  total flux cleaned = -4.80001e-05 Jy
! Component: 2500  -  total flux cleaned = -4.80197e-05 Jy
! Component: 2550  -  total flux cleaned = -4.03281e-05 Jy
! Component: 2600  -  total flux cleaned = -4.79886e-05 Jy
! Component: 2650  -  total flux cleaned = -5.5462e-05 Jy
! Component: 2700  -  total flux cleaned = -2.55705e-05 Jy
! Component: 2750  -  total flux cleaned = -5.52799e-05 Jy
! Component: 2800  -  total flux cleaned = -3.30216e-05 Jy
! Component: 2850  -  total flux cleaned = -6.23059e-05 Jy
! Component: 2900  -  total flux cleaned = -5.50081e-05 Jy
! Component: 2950  -  total flux cleaned = -3.33646e-05 Jy
! Component: 3000  -  total flux cleaned = -4.77555e-05 Jy
! Component: 3050  -  total flux cleaned = -5.48006e-05 Jy
! Component: 3100  -  total flux cleaned = -4.07664e-05 Jy
! Component: 3150  -  total flux cleaned = -5.47371e-05 Jy
! Component: 3200  -  total flux cleaned = -5.47975e-05 Jy
! Component: 3250  -  total flux cleaned = -4.10238e-05 Jy
! Component: 3300  -  total flux cleaned = -4.78896e-05 Jy
! Component: 3350  -  total flux cleaned = -6.83339e-05 Jy
! Component: 3400  -  total flux cleaned = -4.80316e-05 Jy
! Component: 3450  -  total flux cleaned = -4.80174e-05 Jy
! Component: 3500  -  total flux cleaned = -2.1379e-05 Jy
! Component: 3550  -  total flux cleaned = -2.79725e-05 Jy
! Component: 3600  -  total flux cleaned = -2.7988e-05 Jy
! Component: 3650  -  total flux cleaned = -1.4924e-05 Jy
! Component: 3700  -  total flux cleaned = -1.91048e-06 Jy
! Component: 3750  -  total flux cleaned = 4.48961e-06 Jy
! Component: 3800  -  total flux cleaned = 4.46483e-06 Jy
! Component: 3850  -  total flux cleaned = 1.07712e-05 Jy
! Component: 3900  -  total flux cleaned = -2.71996e-05 Jy
! Component: 3950  -  total flux cleaned = -3.348e-05 Jy
! Component: 4000  -  total flux cleaned = -3.97323e-05 Jy
! Component: 4050  -  total flux cleaned = -2.72426e-05 Jy
! Total flux subtracted in 4096 components = -3.34186e-05 Jy
! Clean residual min=-0.000337 max=0.000423 Jy/beam
! Clean residual mean=0.000000 rms=0.000109 Jy/beam
! Combined flux in latest and established models = 0.138324 Jy
keep
! Adding 272 model components to the UV plane model.
! The established model now contains 325 components and 0.138324 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1203+1118_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.681 x 4.714 at 0.7256 degrees (North through East)
! Clean map  min=-0.00077766  max=0.12658 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1203+1118_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.126584 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000106645 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.252745 0.252745 0.50549 1.01098 2.02196 4.04392 8.08784 16.1757 32.3514 64.7027
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.126 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1203+1118_C_uvs.log closed on Sun May 12 14:53:31 2013