! Started logfile: /scr/pima/bp171a7_uvs/J1129-0528_X_uvs.log on Sun May 12 14:03:44 2013
obs /scr/pima/bp171a7_uvs/J1129-0528_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1129-0528_X_uva.fits
! AN table 1: 93 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.784648 visibilities/baseline/integration-bin.
! Found source: J1129-0528
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 21016 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1129-0528_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002038Jy  sigma=0.690862
! Fit after  self-cal, rms=0.972814Jy  sigma=0.670886
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7335 mas, bmaj=2.119 mas, bpa=-3.717 degrees
! Estimated noise=14.7888 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206989 Jy
! Component: 100  -  total flux cleaned = 0.0253249 Jy
! Total flux subtracted in 100 components = 0.0253249 Jy
! Clean residual min=-0.001568 max=0.002007 Jy/beam
! Clean residual mean=0.000000 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.0253249 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0253249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033638Jy  sigma=0.023246
! Fit after  self-cal, rms=0.031629Jy  sigma=0.021867
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00335194 Jy
! Component: 100  -  total flux cleaned = 0.0047928 Jy
! Total flux subtracted in 100 components = 0.0047928 Jy
! Clean residual min=-0.001546 max=0.001728 Jy/beam
! Clean residual mean=-0.000000 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.0301177 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 18 components and 0.0301177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031168Jy  sigma=0.021533
! Fit after  self-cal, rms=0.031170Jy  sigma=0.021531
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9346 mas, bmaj=2.493 mas, bpa=-3.401 degrees
! Estimated noise=7.1034 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147454 Jy
! Component: 100  -  total flux cleaned = 0.00214152 Jy
! Component: 150  -  total flux cleaned = 0.00249583 Jy
! Component: 200  -  total flux cleaned = 0.00269029 Jy
! Total flux subtracted in 200 components = 0.00269029 Jy
! Clean residual min=-0.001061 max=0.001247 Jy/beam
! Clean residual mean=-0.000001 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.0328079 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 30 components and 0.0328079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031109Jy  sigma=0.021487
! Fit after  self-cal, rms=0.031111Jy  sigma=0.021486
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.29     HN        0.89     KP        0.96     LA        1.05     
!   MK        1.01     NL        1.00     OV        1.04     PT        0.90     
!   SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.10     HN        0.87     KP        1.00     LA        1.02     
!   MK        1.08     NL        0.99     OV        1.01     PT        0.94     
!   SC        1.08     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.18     HN        0.83     KP        1.17     LA        0.95     
!   MK        1.09     NL        1.02     OV        1.09     PT        0.97     
!   SC        0.95     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.23     HN        0.98     KP        0.89     LA        0.96     
!   MK        1.10     NL        0.89     OV        1.03     PT        0.93     
!   SC        1.07     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     HN        0.91     KP        1.09     LA        0.98     
!   MK        1.01     NL        0.92     OV        0.97     PT        0.92     
!   SC        0.97     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     HN        1.00     KP        1.05     LA        1.00     
!   MK        0.97     NL        0.94     OV        1.09     PT        0.98     
!   SC        0.90     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.21     HN        0.91     KP        1.02     LA        0.93     
!   MK        0.94     NL        0.91     OV        1.08     PT        0.91     
!   SC        0.95     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     HN        0.98     KP        1.17     LA        0.92     
!   MK        1.01     NL        1.09     OV        1.06     PT        0.85     
!   SC        1.11     
! 
! 
! Fit before self-cal, rms=0.031111Jy  sigma=0.021486
! Fit after  self-cal, rms=0.030683Jy  sigma=0.021317
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9373 mas, bmaj=2.488 mas, bpa=-3.521 degrees
! Estimated noise=7.09993 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000201068 Jy
! Component: 100  -  total flux cleaned = 0.000221436 Jy
! Component: 150  -  total flux cleaned = 0.000231639 Jy
! Component: 200  -  total flux cleaned = 0.000236037 Jy
! Total flux subtracted in 200 components = 0.000236037 Jy
! Clean residual min=-0.000767 max=0.000736 Jy/beam
! Clean residual mean=-0.000002 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.033044 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 34 components and 0.033044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030680Jy  sigma=0.021315
! Fit after  self-cal, rms=0.030736Jy  sigma=0.021303
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030736Jy  sigma=0.021303
! Fit after  self-cal, rms=0.030946Jy  sigma=0.021250
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.938 mas, bmaj=2.486 mas, bpa=-3.635 degrees
! Estimated noise=7.12485 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00014855 Jy
! Component: 100  -  total flux cleaned = 0.000183337 Jy
! Component: 150  -  total flux cleaned = 0.000198746 Jy
! Component: 200  -  total flux cleaned = 0.000200902 Jy
! Total flux subtracted in 200 components = 0.000200902 Jy
! Clean residual min=-0.000643 max=0.000704 Jy/beam
! Clean residual mean=-0.000001 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.0332449 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 38 components and 0.0332449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030946Jy  sigma=0.021249
! Fit after  self-cal, rms=0.030976Jy  sigma=0.021246
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.30196e-05 Jy
! Component: 100  -  total flux cleaned = 2.30481e-05 Jy
! Component: 150  -  total flux cleaned = 2.10739e-05 Jy
! Component: 200  -  total flux cleaned = 1.76111e-05 Jy
! Total flux subtracted in 200 components = 1.76111e-05 Jy
! Clean residual min=-0.000662 max=0.000692 Jy/beam
! Clean residual mean=-0.000002 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.0332625 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 41 components and 0.0332625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030975Jy  sigma=0.021245
! Fit after  self-cal, rms=0.030976Jy  sigma=0.021245
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030976Jy  sigma=0.021245
! Fit after  self-cal, rms=0.031185Jy  sigma=0.021240
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9368 mas, bmaj=2.482 mas, bpa=-3.664 degrees
! Estimated noise=7.13572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115245 Jy
! Component: 100  -  total flux cleaned = 0.000164783 Jy
! Component: 150  -  total flux cleaned = 0.000174576 Jy
! Component: 200  -  total flux cleaned = 0.00017986 Jy
! Total flux subtracted in 200 components = 0.00017986 Jy
! Clean residual min=-0.000676 max=0.000769 Jy/beam
! Clean residual mean=-0.000001 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0334424 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 43 components and 0.0334424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031184Jy  sigma=0.021239
! Fit after  self-cal, rms=0.031198Jy  sigma=0.021239
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20.6, -24.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000721645 Jy
! Component: 100  -  total flux cleaned = 0.00108667 Jy
! Component: 150  -  total flux cleaned = 0.00115526 Jy
! Component: 200  -  total flux cleaned = 0.00117858 Jy
! Total flux subtracted in 200 components = 0.00117858 Jy
! Clean residual min=-0.000653 max=0.000660 Jy/beam
! Clean residual mean=-0.000001 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.0346209 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 72 components and 0.0346209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031182Jy  sigma=0.021226
! Fit after  self-cal, rms=0.031176Jy  sigma=0.021224
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031176Jy  sigma=0.021224
! Fit after  self-cal, rms=0.031220Jy  sigma=0.021222
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=4.389 mas, bpa=-5.676 degrees
! Estimated noise=9.05958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000574332 Jy
! Component: 100  -  total flux cleaned = 0.000683051 Jy
! Component: 150  -  total flux cleaned = 0.000731078 Jy
! Component: 200  -  total flux cleaned = 0.000753204 Jy
! Total flux subtracted in 200 components = 0.000753204 Jy
! Clean residual min=-0.000733 max=0.000952 Jy/beam
! Clean residual mean=-0.000002 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.0353741 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 92 components and 0.0353741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031215Jy  sigma=0.021218
! Fit after  self-cal, rms=0.031219Jy  sigma=0.021216
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152225 Jy
! Component: 100  -  total flux cleaned = 0.000157699 Jy
! Component: 150  -  total flux cleaned = 0.000162258 Jy
! Component: 200  -  total flux cleaned = 0.000166123 Jy
! Total flux subtracted in 200 components = 0.000166123 Jy
! Clean residual min=-0.000756 max=0.000957 Jy/beam
! Clean residual mean=-0.000002 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.0355403 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 97 components and 0.0355403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031218Jy  sigma=0.021216
! Fit after  self-cal, rms=0.031217Jy  sigma=0.021216
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9354 mas, bmaj=2.477 mas, bpa=-3.684 degrees
! Estimated noise=7.15255 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9354 x 2.477 at -3.684 degrees (North through East)
! Clean map  min=-0.00063522  max=0.029995 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7346 mas, bmaj=2.118 mas, bpa=-4.144 degrees
! Estimated noise=15.2092 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225906 Jy
! Component: 100  -  total flux cleaned = 0.027826 Jy
! Component: 150  -  total flux cleaned = 0.0299255 Jy
! Component: 200  -  total flux cleaned = 0.0310319 Jy
! Total flux subtracted in 200 components = 0.0310319 Jy
! Clean residual min=-0.001288 max=0.001338 Jy/beam
! Clean residual mean=-0.000000 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.0310319 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0310319 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9354 mas, bmaj=2.477 mas, bpa=-3.684 degrees
! Estimated noise=7.15255 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159725 Jy
! Component: 100  -  total flux cleaned = 0.00252919 Jy
! Component: 150  -  total flux cleaned = 0.00317494 Jy
! Component: 200  -  total flux cleaned = 0.00363022 Jy
! Total flux subtracted in 200 components = 0.00363022 Jy
! Clean residual min=-0.000656 max=0.000662 Jy/beam
! Clean residual mean=-0.000001 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.0346621 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 56 components and 0.0346621 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=4.389 mas, bpa=-5.676 degrees
! Estimated noise=9.05958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000562417 Jy
! Component: 100  -  total flux cleaned = 0.000709734 Jy
! Component: 150  -  total flux cleaned = 0.000774903 Jy
! Component: 200  -  total flux cleaned = 0.000830351 Jy
! Total flux subtracted in 200 components = 0.000830351 Jy
! Clean residual min=-0.000750 max=0.000956 Jy/beam
! Clean residual mean=-0.000002 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0354925 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.71561e-05 Jy
! Component: 100  -  total flux cleaned = 5.46247e-05 Jy
! Component: 150  -  total flux cleaned = 5.8441e-05 Jy
! Component: 200  -  total flux cleaned = 6.19135e-05 Jy
! Total flux subtracted in 200 components = 6.19135e-05 Jy
! Clean residual min=-0.000750 max=0.000954 Jy/beam
! Clean residual mean=-0.000002 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.0355544 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 87 components and 0.0355544 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9354 mas, bmaj=2.477 mas, bpa=-3.684 degrees
! Estimated noise=7.15255 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000101296 Jy
! Component: 100  -  total flux cleaned = -0.000101553 Jy
! Component: 150  -  total flux cleaned = -8.92219e-05 Jy
! Component: 200  -  total flux cleaned = -7.19508e-05 Jy
! Total flux subtracted in 200 components = -7.19508e-05 Jy
! Clean residual min=-0.000663 max=0.000653 Jy/beam
! Clean residual mean=-0.000001 rms=0.000160 Jy/beam
! Combined flux in latest and established models = 0.0354824 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 97 components and 0.0354824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031218Jy  sigma=0.021217
! Fit after  self-cal, rms=0.031216Jy  sigma=0.021216
wmodel /scr/pima/bp171a7_uvs/J1129-0528_X_map.mod
! Writing 97 model components to file: /scr/pima/bp171a7_uvs/J1129-0528_X_map.mod
wobs /scr/pima/bp171a7_uvs/J1129-0528_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1129-0528_X_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1129-0528_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a7_uvs/J1129-0528_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 5.83423e-05 Jy
! Component: 100  -  total flux cleaned = 0.000147559 Jy
! Component: 150  -  total flux cleaned = 0.000221829 Jy
! Component: 200  -  total flux cleaned = 0.000293258 Jy
! Component: 250  -  total flux cleaned = 0.000322887 Jy
! Component: 300  -  total flux cleaned = 0.000361179 Jy
! Component: 350  -  total flux cleaned = 0.00038887 Jy
! Component: 400  -  total flux cleaned = 0.00042513 Jy
! Component: 450  -  total flux cleaned = 0.000442567 Jy
! Component: 500  -  total flux cleaned = 0.000442429 Jy
! Component: 550  -  total flux cleaned = 0.000442084 Jy
! Component: 600  -  total flux cleaned = 0.000425458 Jy
! Component: 650  -  total flux cleaned = 0.000417207 Jy
! Component: 700  -  total flux cleaned = 0.000409052 Jy
! Component: 750  -  total flux cleaned = 0.000377375 Jy
! Component: 800  -  total flux cleaned = 0.000346255 Jy
! Component: 850  -  total flux cleaned = 0.000293012 Jy
! Component: 900  -  total flux cleaned = 0.000263238 Jy
! Component: 950  -  total flux cleaned = 0.000241086 Jy
! Component: 1000  -  total flux cleaned = 0.000212066 Jy
! Component: 1050  -  total flux cleaned = 0.000176191 Jy
! Component: 1100  -  total flux cleaned = 0.000155046 Jy
! Component: 1150  -  total flux cleaned = 0.000120068 Jy
! Component: 1200  -  total flux cleaned = 9.25861e-05 Jy
! Component: 1250  -  total flux cleaned = 8.59352e-05 Jy
! Component: 1300  -  total flux cleaned = 8.59861e-05 Jy
! Component: 1350  -  total flux cleaned = 7.93507e-05 Jy
! Component: 1400  -  total flux cleaned = 8.582e-05 Jy
! Component: 1450  -  total flux cleaned = 5.98142e-05 Jy
! Component: 1500  -  total flux cleaned = 4.06029e-05 Jy
! Component: 1550  -  total flux cleaned = 4.06274e-05 Jy
! Component: 1600  -  total flux cleaned = 9.3187e-06 Jy
! Component: 1650  -  total flux cleaned = 1.56674e-05 Jy
! Component: 1700  -  total flux cleaned = 9.62329e-06 Jy
! Component: 1750  -  total flux cleaned = 3.56282e-06 Jy
! Component: 1800  -  total flux cleaned = 1.54548e-05 Jy
! Component: 1850  -  total flux cleaned = -2.22403e-06 Jy
! Component: 1900  -  total flux cleaned = -2.57362e-05 Jy
! Component: 1950  -  total flux cleaned = -1.98074e-05 Jy
! Component: 2000  -  total flux cleaned = -1.39338e-05 Jy
! Component: 2050  -  total flux cleaned = -1.96028e-05 Jy
! Component: 2100  -  total flux cleaned = -3.63744e-05 Jy
! Component: 2150  -  total flux cleaned = -1.40107e-05 Jy
! Component: 2200  -  total flux cleaned = -3.06914e-05 Jy
! Component: 2250  -  total flux cleaned = -3.0627e-05 Jy
! Component: 2300  -  total flux cleaned = -6.31795e-05 Jy
! Component: 2350  -  total flux cleaned = -5.78655e-05 Jy
! Component: 2400  -  total flux cleaned = -8.98258e-05 Jy
! Component: 2450  -  total flux cleaned = -0.000100375 Jy
! Component: 2500  -  total flux cleaned = -9.51255e-05 Jy
! Component: 2550  -  total flux cleaned = -0.000100404 Jy
! Component: 2600  -  total flux cleaned = -0.000100433 Jy
! Component: 2650  -  total flux cleaned = -0.000120854 Jy
! Component: 2700  -  total flux cleaned = -0.000125922 Jy
! Component: 2750  -  total flux cleaned = -0.000146051 Jy
! Component: 2800  -  total flux cleaned = -0.000165968 Jy
! Component: 2850  -  total flux cleaned = -0.000170951 Jy
! Component: 2900  -  total flux cleaned = -0.000175831 Jy
! Component: 2950  -  total flux cleaned = -0.00019537 Jy
! Component: 3000  -  total flux cleaned = -0.000209963 Jy
! Component: 3050  -  total flux cleaned = -0.000234056 Jy
! Component: 3100  -  total flux cleaned = -0.000229249 Jy
! Component: 3150  -  total flux cleaned = -0.000243526 Jy
! Component: 3200  -  total flux cleaned = -0.00024815 Jy
! Component: 3250  -  total flux cleaned = -0.000266925 Jy
! Component: 3300  -  total flux cleaned = -0.000280885 Jy
! Component: 3350  -  total flux cleaned = -0.000280913 Jy
! Component: 3400  -  total flux cleaned = -0.000280872 Jy
! Component: 3450  -  total flux cleaned = -0.000294612 Jy
! Component: 3500  -  total flux cleaned = -0.000290006 Jy
! Component: 3550  -  total flux cleaned = -0.000317128 Jy
! Component: 3600  -  total flux cleaned = -0.00033064 Jy
! Component: 3650  -  total flux cleaned = -0.000335114 Jy
! Component: 3700  -  total flux cleaned = -0.00033954 Jy
! Component: 3750  -  total flux cleaned = -0.000357206 Jy
! Component: 3800  -  total flux cleaned = -0.000383498 Jy
! Component: 3850  -  total flux cleaned = -0.000387872 Jy
! Component: 3900  -  total flux cleaned = -0.000400889 Jy
! Component: 3950  -  total flux cleaned = -0.0004095 Jy
! Component: 4000  -  total flux cleaned = -0.000435197 Jy
! Component: 4050  -  total flux cleaned = -0.000460749 Jy
! Total flux subtracted in 4096 components = -0.00046501 Jy
! Clean residual min=-0.000258 max=0.000301 Jy/beam
! Clean residual mean=-0.000000 rms=0.000080 Jy/beam
! Combined flux in latest and established models = 0.0350174 Jy
keep
! Adding 354 model components to the UV plane model.
! The established model now contains 451 components and 0.0350174 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1129-0528_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9354 x 2.477 at -3.684 degrees (North through East)
! Clean map  min=-0.00052442  max=0.030067 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1129-0528_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0300668 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 8.00957e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.799176 0.799176 1.59835 3.1967 6.39341 12.7868 25.5736 51.1473
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.03 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1129-0528_X_uvs.log closed on Sun May 12 14:03:49 2013