! Started logfile: /scr/pima/bp171a7_uvs/J1129-0528_C_uvs.log on Sun May 12 14:53:04 2013
obs /scr/pima/bp171a7_uvs/J1129-0528_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1129-0528_C_uva.fits
! AN table 1: 93 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.791219 visibilities/baseline/integration-bin.
! Found source: J1129-0528
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 21192 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1129-0528_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 154 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999875Jy  sigma=0.689477
! Fit after  self-cal, rms=0.976840Jy  sigma=0.673770
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.266 mas, bmaj=3.59 mas, bpa=-3.764 degrees
! Estimated noise=12.3843 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0173365 Jy
! Component: 100  -  total flux cleaned = 0.0216794 Jy
! Total flux subtracted in 100 components = 0.0216794 Jy
! Clean residual min=-0.002001 max=0.002017 Jy/beam
! Clean residual mean=-0.000005 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.0216793 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0216793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.049521Jy  sigma=0.034700
! Fit after  self-cal, rms=0.048526Jy  sigma=0.034017
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00369321 Jy
! Component: 100  -  total flux cleaned = 0.00555157 Jy
! Total flux subtracted in 100 components = 0.00555157 Jy
! Clean residual min=-0.001778 max=0.001891 Jy/beam
! Clean residual mean=-0.000005 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.0272309 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 23 components and 0.0272309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048125Jy  sigma=0.033729
! Fit after  self-cal, rms=0.048118Jy  sigma=0.033722
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.64 mas, bmaj=4.292 mas, bpa=-3.051 degrees
! Estimated noise=7.07209 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219348 Jy
! Component: 100  -  total flux cleaned = 0.0032791 Jy
! Component: 150  -  total flux cleaned = 0.003869 Jy
! Component: 200  -  total flux cleaned = 0.00419394 Jy
! Total flux subtracted in 200 components = 0.00419394 Jy
! Clean residual min=-0.001702 max=0.002084 Jy/beam
! Clean residual mean=-0.000011 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.0314249 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 37 components and 0.0314249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048028Jy  sigma=0.033658
! Fit after  self-cal, rms=0.048027Jy  sigma=0.033655
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.53     HN        0.91     KP        0.41     LA        1.04     
!   MK        1.20     NL        0.93     OV        0.62     PT        0.50     
!   SC        1.18     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.43     HN        0.84     KP        0.83     LA        1.09     
!   MK        1.03     NL        1.03     OV        0.75     PT        0.58     
!   SC        1.07     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.27     HN        0.94     KP        1.06     LA        1.22     
!   MK        1.06     NL        1.11     OV        1.37     PT        1.05     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.20     HN        0.97     KP        1.11     LA        1.19     
!   MK        0.98     NL        1.09     OV        1.03     PT        1.16     
!   SC        0.96     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.20     HN        0.98     KP        1.11     LA        1.31     
!   MK        0.95     NL        1.09     OV        1.12     PT        1.04     
!   SC        0.94     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     HN        1.09     KP        1.14     LA        1.36     
!   MK        0.95     NL        1.11     OV        1.09     PT        1.17     
!   SC        0.95     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.18     HN        0.98     KP        1.10     LA        1.21     
!   MK        0.91     NL        1.08     OV        1.15     PT        1.13     
!   SC        0.92     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     HN        1.04     KP        1.13     LA        1.22     
!   MK        0.90     NL        1.00     OV        1.07     PT        1.05     
!   SC        0.93     
! 
! 
! Fit before self-cal, rms=0.048027Jy  sigma=0.033655
! Fit after  self-cal, rms=0.036039Jy  sigma=0.032224
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.643 mas, bmaj=4.323 mas, bpa=-3.032 degrees
! Estimated noise=7.05796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.77209e-05 Jy
! Component: 100  -  total flux cleaned = 9.3152e-05 Jy
! Component: 150  -  total flux cleaned = 9.90789e-05 Jy
! Component: 200  -  total flux cleaned = 0.000104184 Jy
! Total flux subtracted in 200 components = 0.000104184 Jy
! Clean residual min=-0.001560 max=0.001687 Jy/beam
! Clean residual mean=-0.000006 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.031529 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 42 components and 0.031529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036037Jy  sigma=0.032223
! Fit after  self-cal, rms=0.036573Jy  sigma=0.031918
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036573Jy  sigma=0.031918
! Fit after  self-cal, rms=0.039522Jy  sigma=0.029709
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.641 mas, bmaj=4.289 mas, bpa=-2.874 degrees
! Estimated noise=7.34861 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000664221 Jy
! Component: 100  -  total flux cleaned = 0.000962075 Jy
! Component: 150  -  total flux cleaned = 0.00110683 Jy
! Component: 200  -  total flux cleaned = 0.00117843 Jy
! Total flux subtracted in 200 components = 0.00117843 Jy
! Clean residual min=-0.000912 max=0.000806 Jy/beam
! Clean residual mean=-0.000002 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.0327075 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 56 components and 0.0327075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039527Jy  sigma=0.029651
! Fit after  self-cal, rms=0.039798Jy  sigma=0.029459
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108407 Jy
! Component: 100  -  total flux cleaned = -0.000122037 Jy
! Component: 150  -  total flux cleaned = -0.000118398 Jy
! Component: 200  -  total flux cleaned = -0.000115263 Jy
! Total flux subtracted in 200 components = -0.000115263 Jy
! Clean residual min=-0.000976 max=0.000936 Jy/beam
! Clean residual mean=-0.000003 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.0325922 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 61 components and 0.0325922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039794Jy  sigma=0.029466
! Fit after  self-cal, rms=0.039794Jy  sigma=0.029465
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039794Jy  sigma=0.029465
! Fit after  self-cal, rms=0.044735Jy  sigma=0.029002
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.639 mas, bmaj=4.274 mas, bpa=-2.724 degrees
! Estimated noise=7.40059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000243617 Jy
! Component: 100  -  total flux cleaned = 0.000268349 Jy
! Component: 150  -  total flux cleaned = 0.000283032 Jy
! Component: 200  -  total flux cleaned = 0.000289967 Jy
! Total flux subtracted in 200 components = 0.000289967 Jy
! Clean residual min=-0.000745 max=0.000794 Jy/beam
! Clean residual mean=-0.000000 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0328822 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 63 components and 0.0328822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044734Jy  sigma=0.029003
! Fit after  self-cal, rms=0.044994Jy  sigma=0.028892
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 39).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000796276 Jy
! Component: 100  -  total flux cleaned = 0.00108634 Jy
! Component: 150  -  total flux cleaned = 0.00112404 Jy
! Component: 200  -  total flux cleaned = 0.00115505 Jy
! Total flux subtracted in 200 components = 0.00115505 Jy
! Clean residual min=-0.000902 max=0.000743 Jy/beam
! Clean residual mean=-0.000001 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.0340372 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 79 components and 0.0340372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044976Jy  sigma=0.028877
! Fit after  self-cal, rms=0.044986Jy  sigma=0.028872
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044986Jy  sigma=0.028872
! Fit after  self-cal, rms=0.057961Jy  sigma=0.028798
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.792 mas, bmaj=7.561 mas, bpa=-4.512 degrees
! Estimated noise=9.33875 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000386078 Jy
! Component: 100  -  total flux cleaned = 0.000546173 Jy
! Component: 150  -  total flux cleaned = 0.000570419 Jy
! Component: 200  -  total flux cleaned = 0.000577623 Jy
! Total flux subtracted in 200 components = 0.000577623 Jy
! Clean residual min=-0.001127 max=0.000874 Jy/beam
! Clean residual mean=-0.000000 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.0346149 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 96 components and 0.0346149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.057959Jy  sigma=0.028795
! Fit after  self-cal, rms=0.058131Jy  sigma=0.028773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115256 Jy
! Component: 100  -  total flux cleaned = 0.000157963 Jy
! Component: 150  -  total flux cleaned = 0.000165316 Jy
! Component: 200  -  total flux cleaned = 0.000145022 Jy
! Total flux subtracted in 200 components = 0.000145022 Jy
! Clean residual min=-0.001139 max=0.000834 Jy/beam
! Clean residual mean=-0.000000 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.0347599 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 104 components and 0.0347599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.058128Jy  sigma=0.028771
! Fit after  self-cal, rms=0.058124Jy  sigma=0.028770
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.636 mas, bmaj=4.263 mas, bpa=-2.62 degrees
! Estimated noise=7.46252 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.636 x 4.263 at -2.62 degrees (North through East)
! Clean map  min=-0.00084507  max=0.026482 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.254 mas, bmaj=3.584 mas, bpa=-3.342 degrees
! Estimated noise=12.8463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192414 Jy
! Component: 100  -  total flux cleaned = 0.0243439 Jy
! Component: 150  -  total flux cleaned = 0.0269216 Jy
! Component: 200  -  total flux cleaned = 0.0285234 Jy
! Total flux subtracted in 200 components = 0.0285234 Jy
! Clean residual min=-0.001102 max=0.001157 Jy/beam
! Clean residual mean=-0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.0285234 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.0285234 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.636 mas, bmaj=4.263 mas, bpa=-2.62 degrees
! Estimated noise=7.46252 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00213469 Jy
! Component: 100  -  total flux cleaned = 0.00335887 Jy
! Component: 150  -  total flux cleaned = 0.00420562 Jy
! Component: 200  -  total flux cleaned = 0.00482621 Jy
! Total flux subtracted in 200 components = 0.00482621 Jy
! Clean residual min=-0.000925 max=0.000707 Jy/beam
! Clean residual mean=-0.000000 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.0333496 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 56 components and 0.0333496 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.792 mas, bmaj=7.561 mas, bpa=-4.512 degrees
! Estimated noise=9.33875 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000699078 Jy
! Component: 100  -  total flux cleaned = 0.00108018 Jy
! Component: 150  -  total flux cleaned = 0.00127398 Jy
! Component: 200  -  total flux cleaned = 0.00130901 Jy
! Total flux subtracted in 200 components = 0.00130901 Jy
! Clean residual min=-0.001178 max=0.000838 Jy/beam
! Clean residual mean=-0.000000 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.0346586 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.42127e-05 Jy
! Component: 100  -  total flux cleaned = 4.69044e-05 Jy
! Component: 150  -  total flux cleaned = 6.12406e-05 Jy
! Component: 200  -  total flux cleaned = 7.43952e-05 Jy
! Total flux subtracted in 200 components = 7.43952e-05 Jy
! Clean residual min=-0.001171 max=0.000834 Jy/beam
! Clean residual mean=-0.000000 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.034733 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 86 components and 0.034733 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.636 mas, bmaj=4.263 mas, bpa=-2.62 degrees
! Estimated noise=7.46252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.87427e-05 Jy
! Component: 100  -  total flux cleaned = 4.86055e-05 Jy
! Component: 150  -  total flux cleaned = 5.6579e-05 Jy
! Component: 200  -  total flux cleaned = 6.42176e-05 Jy
! Total flux subtracted in 200 components = 6.42176e-05 Jy
! Clean residual min=-0.000861 max=0.000721 Jy/beam
! Clean residual mean=-0.000000 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.0347972 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 100 components and 0.0347972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.058120Jy  sigma=0.028770
! Fit after  self-cal, rms=0.058122Jy  sigma=0.028769
wmodel /scr/pima/bp171a7_uvs/J1129-0528_C_map.mod
! Writing 100 model components to file: /scr/pima/bp171a7_uvs/J1129-0528_C_map.mod
wobs /scr/pima/bp171a7_uvs/J1129-0528_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1129-0528_C_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1129-0528_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a7_uvs/J1129-0528_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000185447 Jy
! Component: 100  -  total flux cleaned = -0.000185427 Jy
! Component: 150  -  total flux cleaned = -0.000209794 Jy
! Component: 200  -  total flux cleaned = -0.000174454 Jy
! Component: 250  -  total flux cleaned = -0.00011693 Jy
! Component: 300  -  total flux cleaned = -4.96739e-05 Jy
! Component: 350  -  total flux cleaned = -1.68331e-05 Jy
! Component: 400  -  total flux cleaned = 4.75015e-05 Jy
! Component: 450  -  total flux cleaned = 0.000110544 Jy
! Component: 500  -  total flux cleaned = 0.000141672 Jy
! Component: 550  -  total flux cleaned = 0.000182427 Jy
! Component: 600  -  total flux cleaned = 0.000232443 Jy
! Component: 650  -  total flux cleaned = 0.000281625 Jy
! Component: 700  -  total flux cleaned = 0.00029129 Jy
! Component: 750  -  total flux cleaned = 0.000301072 Jy
! Component: 800  -  total flux cleaned = 0.000376846 Jy
! Component: 850  -  total flux cleaned = 0.000386254 Jy
! Component: 900  -  total flux cleaned = 0.000432231 Jy
! Component: 950  -  total flux cleaned = 0.000441392 Jy
! Component: 1000  -  total flux cleaned = 0.000459561 Jy
! Component: 1050  -  total flux cleaned = 0.000495287 Jy
! Component: 1100  -  total flux cleaned = 0.000539183 Jy
! Component: 1150  -  total flux cleaned = 0.000547735 Jy
! Component: 1200  -  total flux cleaned = 0.000547766 Jy
! Component: 1250  -  total flux cleaned = 0.000556285 Jy
! Component: 1300  -  total flux cleaned = 0.000581428 Jy
! Component: 1350  -  total flux cleaned = 0.000581502 Jy
! Component: 1400  -  total flux cleaned = 0.000598129 Jy
! Component: 1450  -  total flux cleaned = 0.000630611 Jy
! Component: 1500  -  total flux cleaned = 0.000646562 Jy
! Component: 1550  -  total flux cleaned = 0.000662541 Jy
! Component: 1600  -  total flux cleaned = 0.000678295 Jy
! Component: 1650  -  total flux cleaned = 0.000670415 Jy
! Component: 1700  -  total flux cleaned = 0.000701566 Jy
! Component: 1750  -  total flux cleaned = 0.000717011 Jy
! Component: 1800  -  total flux cleaned = 0.000724689 Jy
! Component: 1850  -  total flux cleaned = 0.000732146 Jy
! Component: 1900  -  total flux cleaned = 0.000754909 Jy
! Component: 1950  -  total flux cleaned = 0.000724964 Jy
! Component: 2000  -  total flux cleaned = 0.000762088 Jy
! Component: 2050  -  total flux cleaned = 0.000776842 Jy
! Component: 2100  -  total flux cleaned = 0.000769506 Jy
! Component: 2150  -  total flux cleaned = 0.00076945 Jy
! Component: 2200  -  total flux cleaned = 0.000783939 Jy
! Component: 2250  -  total flux cleaned = 0.000819626 Jy
! Component: 2300  -  total flux cleaned = 0.000812529 Jy
! Component: 2350  -  total flux cleaned = 0.00086192 Jy
! Component: 2400  -  total flux cleaned = 0.00086195 Jy
! Component: 2450  -  total flux cleaned = 0.000854911 Jy
! Component: 2500  -  total flux cleaned = 0.000875666 Jy
! Component: 2550  -  total flux cleaned = 0.00087559 Jy
! Component: 2600  -  total flux cleaned = 0.000909641 Jy
! Component: 2650  -  total flux cleaned = 0.000916415 Jy
! Component: 2700  -  total flux cleaned = 0.000923163 Jy
! Component: 2750  -  total flux cleaned = 0.000943217 Jy
! Component: 2800  -  total flux cleaned = 0.000956454 Jy
! Component: 2850  -  total flux cleaned = 0.000982971 Jy
! Component: 2900  -  total flux cleaned = 0.000989541 Jy
! Component: 2950  -  total flux cleaned = 0.00102866 Jy
! Component: 3000  -  total flux cleaned = 0.00103518 Jy
! Component: 3050  -  total flux cleaned = 0.00106097 Jy
! Component: 3100  -  total flux cleaned = 0.00104172 Jy
! Component: 3150  -  total flux cleaned = 0.00106088 Jy
! Component: 3200  -  total flux cleaned = 0.00107353 Jy
! Component: 3250  -  total flux cleaned = 0.00109242 Jy
! Component: 3300  -  total flux cleaned = 0.00109874 Jy
! Component: 3350  -  total flux cleaned = 0.00110502 Jy
! Component: 3400  -  total flux cleaned = 0.00114219 Jy
! Component: 3450  -  total flux cleaned = 0.00113605 Jy
! Component: 3500  -  total flux cleaned = 0.00116058 Jy
! Component: 3550  -  total flux cleaned = 0.00116663 Jy
! Component: 3600  -  total flux cleaned = 0.0011848 Jy
! Component: 3650  -  total flux cleaned = 0.00116678 Jy
! Component: 3700  -  total flux cleaned = 0.0012148 Jy
! Component: 3750  -  total flux cleaned = 0.00123269 Jy
! Component: 3800  -  total flux cleaned = 0.00122674 Jy
! Component: 3850  -  total flux cleaned = 0.00125622 Jy
! Component: 3900  -  total flux cleaned = 0.00126214 Jy
! Component: 3950  -  total flux cleaned = 0.00126801 Jy
! Component: 4000  -  total flux cleaned = 0.00127385 Jy
! Component: 4050  -  total flux cleaned = 0.00132016 Jy
! Total flux subtracted in 4096 components = 0.00131435 Jy
! Clean residual min=-0.000388 max=0.000376 Jy/beam
! Clean residual mean=-0.000000 rms=0.000110 Jy/beam
! Combined flux in latest and established models = 0.0361115 Jy
keep
! Adding 331 model components to the UV plane model.
! The established model now contains 431 components and 0.0361115 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1129-0528_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.636 x 4.263 at -2.62 degrees (North through East)
! Clean map  min=-0.00059151  max=0.026447 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1129-0528_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0264466 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000109998 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.24777 1.24777 2.49555 4.99109 9.98218 19.9644 39.9287 79.8575
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.026 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1129-0528_C_uvs.log closed on Sun May 12 14:53:09 2013