! Started logfile: /scr/pima/bp171a7_uvs/J1101+0215_C_uvs.log on Sun May 12 14:52:41 2013
obs /scr/pima/bp171a7_uvs/J1101+0215_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1101+0215_C_uva.fits
! AN table 1: 11 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.772727 visibilities/baseline/integration-bin.
! Found source: J1101+0215
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2448 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1101+0215_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.989956Jy  sigma=0.699718
! Fit after  self-cal, rms=0.917760Jy  sigma=0.648698
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.262 mas, bmaj=3.765 mas, bpa=-2.848 degrees
! Estimated noise=26.2055 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0611665 Jy
! Component: 100  -  total flux cleaned = 0.0779186 Jy
! Total flux subtracted in 100 components = 0.0779186 Jy
! Clean residual min=-0.003540 max=0.007426 Jy/beam
! Clean residual mean=0.000002 rms=0.001020 Jy/beam
! Combined flux in latest and established models = 0.0779186 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0779186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028501Jy  sigma=0.020131
! Fit after  self-cal, rms=0.028455Jy  sigma=0.020098
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00829384 Jy
! Component: 100  -  total flux cleaned = 0.0125555 Jy
! Total flux subtracted in 100 components = 0.0125555 Jy
! Clean residual min=-0.002683 max=0.002937 Jy/beam
! Clean residual mean=-0.000000 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.0904742 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.0904742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025542Jy  sigma=0.018038
! Fit after  self-cal, rms=0.025506Jy  sigma=0.018013
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.458 mas, bmaj=4.144 mas, bpa=-3.421 degrees
! Estimated noise=20.2193 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00328391 Jy
! Component: 100  -  total flux cleaned = 0.00486993 Jy
! Component: 150  -  total flux cleaned = 0.00567653 Jy
! Component: 200  -  total flux cleaned = 0.00608762 Jy
! Total flux subtracted in 200 components = 0.00608762 Jy
! Clean residual min=-0.002311 max=0.002663 Jy/beam
! Clean residual mean=-0.000002 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.0965618 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 18 components and 0.0965618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025121Jy  sigma=0.017741
! Fit after  self-cal, rms=0.025115Jy  sigma=0.017736
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        0.94     KP        0.90     LA        1.10     
!   MK        1.19     NL        1.07     OV        1.02     PT        0.88     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        0.96     KP        0.97     LA        1.13     
!   MK        1.05     NL        1.08     OV        1.01     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        0.94     KP        0.97     LA        1.08     
!   MK        1.07     NL        1.10     OV        0.98     PT        0.91     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        0.97     KP        0.95     LA        1.11     
!   MK        1.04     NL        0.97     OV        0.97     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        0.92     KP        1.00     LA        1.12     
!   MK        1.01     NL        0.99     OV        0.98     PT        0.91     
!   SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.04     KP        1.01     LA        1.16     
!   MK        0.98     NL        0.93     OV        0.99     PT        1.03     
!   SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     HN        0.95     KP        0.92     LA        1.08     
!   MK        1.01     NL        1.00     OV        0.97     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     HN        0.94     KP        1.01     LA        1.08     
!   MK        0.99     NL        0.97     OV        1.00     PT        0.96     
!   SC        1.04     
! 
! 
! Fit before self-cal, rms=0.025115Jy  sigma=0.017736
! Fit after  self-cal, rms=0.024001Jy  sigma=0.016796
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.46 mas, bmaj=4.192 mas, bpa=-3.62 degrees
! Estimated noise=20.3543 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.0111e-05 Jy
! Component: 100  -  total flux cleaned = 2.68767e-05 Jy
! Component: 150  -  total flux cleaned = 2.61352e-05 Jy
! Component: 200  -  total flux cleaned = 3.52639e-05 Jy
! Total flux subtracted in 200 components = 3.52639e-05 Jy
! Clean residual min=-0.001501 max=0.001532 Jy/beam
! Clean residual mean=-0.000000 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.0965971 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 29 components and 0.096597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023990Jy  sigma=0.016789
! Fit after  self-cal, rms=0.024004Jy  sigma=0.016785
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024004Jy  sigma=0.016785
! Fit after  self-cal, rms=0.023973Jy  sigma=0.016784
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.46 mas, bmaj=4.191 mas, bpa=-3.621 degrees
! Estimated noise=20.3258 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.5319e-05 Jy
! Component: 100  -  total flux cleaned = -6.39284e-05 Jy
! Component: 150  -  total flux cleaned = -5.55565e-05 Jy
! Component: 200  -  total flux cleaned = -4.8312e-05 Jy
! Total flux subtracted in 200 components = -4.8312e-05 Jy
! Clean residual min=-0.001477 max=0.001532 Jy/beam
! Clean residual mean=-0.000000 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.0965487 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 32 components and 0.0965487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023967Jy  sigma=0.016781
! Fit after  self-cal, rms=0.023967Jy  sigma=0.016780
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (45.6, 17.7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127862 Jy
! Component: 100  -  total flux cleaned = 0.00157314 Jy
! Component: 150  -  total flux cleaned = 0.0017343 Jy
! Component: 200  -  total flux cleaned = 0.00181538 Jy
! Total flux subtracted in 200 components = 0.00181538 Jy
! Clean residual min=-0.001390 max=0.001187 Jy/beam
! Clean residual mean=-0.000000 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.0983641 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 51 components and 0.0983641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023890Jy  sigma=0.016730
! Fit after  self-cal, rms=0.023885Jy  sigma=0.016726
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023885Jy  sigma=0.016726
! Fit after  self-cal, rms=0.023856Jy  sigma=0.016723
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.46 mas, bmaj=4.189 mas, bpa=-3.598 degrees
! Estimated noise=20.2894 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000407204 Jy
! Component: 100  -  total flux cleaned = 0.000482397 Jy
! Component: 150  -  total flux cleaned = 0.000533144 Jy
! Component: 200  -  total flux cleaned = 0.000565456 Jy
! Total flux subtracted in 200 components = 0.000565456 Jy
! Clean residual min=-0.001345 max=0.001162 Jy/beam
! Clean residual mean=-0.000000 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.0989296 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 61 components and 0.0989295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023838Jy  sigma=0.016712
! Fit after  self-cal, rms=0.023838Jy  sigma=0.016711
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000154858 Jy
! Component: 100  -  total flux cleaned = 0.000214551 Jy
! Component: 150  -  total flux cleaned = 0.000241312 Jy
! Component: 200  -  total flux cleaned = 0.000241014 Jy
! Total flux subtracted in 200 components = 0.000241014 Jy
! Clean residual min=-0.001336 max=0.001160 Jy/beam
! Clean residual mean=-0.000000 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.0991706 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 68 components and 0.0991706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023831Jy  sigma=0.016707
! Fit after  self-cal, rms=0.023831Jy  sigma=0.016707
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023831Jy  sigma=0.016707
! Fit after  self-cal, rms=0.023842Jy  sigma=0.016706
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.345 mas, bmaj=7.054 mas, bpa=-7.576 degrees
! Estimated noise=27.5428 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00024708 Jy
! Component: 100  -  total flux cleaned = 0.00029128 Jy
! Component: 150  -  total flux cleaned = 0.000313168 Jy
! Component: 200  -  total flux cleaned = 0.000319353 Jy
! Total flux subtracted in 200 components = 0.000319353 Jy
! Clean residual min=-0.001199 max=0.001208 Jy/beam
! Clean residual mean=-0.000001 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.0994899 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 84 components and 0.0994899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023840Jy  sigma=0.016706
! Fit after  self-cal, rms=0.023841Jy  sigma=0.016705
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.54875e-05 Jy
! Component: 100  -  total flux cleaned = 5.78639e-05 Jy
! Component: 150  -  total flux cleaned = 6.34776e-05 Jy
! Component: 200  -  total flux cleaned = 6.85504e-05 Jy
! Total flux subtracted in 200 components = 6.85504e-05 Jy
! Clean residual min=-0.001193 max=0.001184 Jy/beam
! Clean residual mean=-0.000001 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.0995585 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 92 components and 0.0995585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023840Jy  sigma=0.016706
! Fit after  self-cal, rms=0.023840Jy  sigma=0.016705
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.461 mas, bmaj=4.188 mas, bpa=-3.564 degrees
! Estimated noise=20.2843 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.461 x 4.188 at -3.564 degrees (North through East)
! Clean map  min=-0.0012314  max=0.081054 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.269 mas, bmaj=3.762 mas, bpa=-2.824 degrees
! Estimated noise=26.3854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0611545 Jy
! Component: 100  -  total flux cleaned = 0.0780742 Jy
! Component: 150  -  total flux cleaned = 0.0861085 Jy
! Component: 200  -  total flux cleaned = 0.0902586 Jy
! Total flux subtracted in 200 components = 0.0902586 Jy
! Clean residual min=-0.001835 max=0.002158 Jy/beam
! Clean residual mean=0.000001 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.0902586 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0902586 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.461 mas, bmaj=4.188 mas, bpa=-3.564 degrees
! Estimated noise=20.2843 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00310958 Jy
! Component: 100  -  total flux cleaned = 0.00497608 Jy
! Component: 150  -  total flux cleaned = 0.00626406 Jy
! Component: 200  -  total flux cleaned = 0.00720106 Jy
! Total flux subtracted in 200 components = 0.00720106 Jy
! Clean residual min=-0.001378 max=0.001148 Jy/beam
! Clean residual mean=-0.000000 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.0974596 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 34 components and 0.0974596 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.345 mas, bmaj=7.054 mas, bpa=-7.576 degrees
! Estimated noise=27.5428 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112687 Jy
! Component: 100  -  total flux cleaned = 0.00166457 Jy
! Component: 150  -  total flux cleaned = 0.00180549 Jy
! Component: 200  -  total flux cleaned = 0.00190266 Jy
! Total flux subtracted in 200 components = 0.00190266 Jy
! Clean residual min=-0.001251 max=0.001243 Jy/beam
! Clean residual mean=-0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0993623 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.92202e-05 Jy
! Component: 100  -  total flux cleaned = 0.000113197 Jy
! Component: 150  -  total flux cleaned = 0.000152167 Jy
! Component: 200  -  total flux cleaned = 0.000152432 Jy
! Total flux subtracted in 200 components = 0.000152432 Jy
! Clean residual min=-0.001204 max=0.001227 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.0995147 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 60 components and 0.0995147 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.461 mas, bmaj=4.188 mas, bpa=-3.564 degrees
! Estimated noise=20.2843 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000122601 Jy
! Component: 100  -  total flux cleaned = -0.000106974 Jy
! Component: 150  -  total flux cleaned = -0.000134048 Jy
! Component: 200  -  total flux cleaned = -0.000145622 Jy
! Total flux subtracted in 200 components = -0.000145622 Jy
! Clean residual min=-0.001288 max=0.001160 Jy/beam
! Clean residual mean=-0.000000 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.0993691 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 75 components and 0.0993691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023842Jy  sigma=0.016706
! Fit after  self-cal, rms=0.023839Jy  sigma=0.016704
wmodel /scr/pima/bp171a7_uvs/J1101+0215_C_map.mod
! Writing 75 model components to file: /scr/pima/bp171a7_uvs/J1101+0215_C_map.mod
wobs /scr/pima/bp171a7_uvs/J1101+0215_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1101+0215_C_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1101+0215_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a7_uvs/J1101+0215_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000373408 Jy
! Component: 100  -  total flux cleaned = -0.000556174 Jy
! Component: 150  -  total flux cleaned = -0.000689497 Jy
! Component: 200  -  total flux cleaned = -0.000654877 Jy
! Component: 250  -  total flux cleaned = -0.000587206 Jy
! Component: 300  -  total flux cleaned = -0.00053797 Jy
! Component: 350  -  total flux cleaned = -0.000505742 Jy
! Component: 400  -  total flux cleaned = -0.000505631 Jy
! Component: 450  -  total flux cleaned = -0.000490534 Jy
! Component: 500  -  total flux cleaned = -0.000475936 Jy
! Component: 550  -  total flux cleaned = -0.000375851 Jy
! Component: 600  -  total flux cleaned = -0.000306357 Jy
! Component: 650  -  total flux cleaned = -0.00032019 Jy
! Component: 700  -  total flux cleaned = -0.000266491 Jy
! Component: 750  -  total flux cleaned = -0.000240346 Jy
! Component: 800  -  total flux cleaned = -0.000227077 Jy
! Component: 850  -  total flux cleaned = -0.000176397 Jy
! Component: 900  -  total flux cleaned = -0.000163926 Jy
! Component: 950  -  total flux cleaned = -0.000163901 Jy
! Component: 1000  -  total flux cleaned = -0.000127764 Jy
! Component: 1050  -  total flux cleaned = -0.000116201 Jy
! Component: 1100  -  total flux cleaned = -6.93578e-05 Jy
! Component: 1150  -  total flux cleaned = -4.64972e-05 Jy
! Component: 1200  -  total flux cleaned = -3.521e-05 Jy
! Component: 1250  -  total flux cleaned = 2.02324e-05 Jy
! Component: 1300  -  total flux cleaned = 9.26445e-06 Jy
! Component: 1350  -  total flux cleaned = 4.17514e-05 Jy
! Component: 1400  -  total flux cleaned = 6.28923e-05 Jy
! Component: 1450  -  total flux cleaned = 7.32483e-05 Jy
! Component: 1500  -  total flux cleaned = 0.000104214 Jy
! Component: 1550  -  total flux cleaned = 0.000124569 Jy
! Component: 1600  -  total flux cleaned = 0.000134566 Jy
! Component: 1650  -  total flux cleaned = 0.000174245 Jy
! Component: 1700  -  total flux cleaned = 0.000183979 Jy
! Component: 1750  -  total flux cleaned = 0.000232252 Jy
! Component: 1800  -  total flux cleaned = 0.000270376 Jy
! Component: 1850  -  total flux cleaned = 0.000298427 Jy
! Component: 1900  -  total flux cleaned = 0.000307645 Jy
! Component: 1950  -  total flux cleaned = 0.000344434 Jy
! Component: 2000  -  total flux cleaned = 0.000380675 Jy
! Component: 2050  -  total flux cleaned = 0.000389804 Jy
! Component: 2100  -  total flux cleaned = 0.000425349 Jy
! Component: 2150  -  total flux cleaned = 0.000434067 Jy
! Component: 2200  -  total flux cleaned = 0.000468498 Jy
! Component: 2250  -  total flux cleaned = 0.000468483 Jy
! Component: 2300  -  total flux cleaned = 0.000485262 Jy
! Component: 2350  -  total flux cleaned = 0.000518629 Jy
! Component: 2400  -  total flux cleaned = 0.000551475 Jy
! Component: 2450  -  total flux cleaned = 0.000551481 Jy
! Component: 2500  -  total flux cleaned = 0.000599829 Jy
! Component: 2550  -  total flux cleaned = 0.000623624 Jy
! Component: 2600  -  total flux cleaned = 0.000647335 Jy
! Component: 2650  -  total flux cleaned = 0.000694302 Jy
! Component: 2700  -  total flux cleaned = 0.00072527 Jy
! Component: 2750  -  total flux cleaned = 0.000755957 Jy
! Component: 2800  -  total flux cleaned = 0.000794038 Jy
! Component: 2850  -  total flux cleaned = 0.000824243 Jy
! Component: 2900  -  total flux cleaned = 0.000861637 Jy
! Component: 2950  -  total flux cleaned = 0.000891328 Jy
! Component: 3000  -  total flux cleaned = 0.000920669 Jy
! Component: 3050  -  total flux cleaned = 0.000942582 Jy
! Component: 3100  -  total flux cleaned = 0.000949797 Jy
! Component: 3150  -  total flux cleaned = 0.00096411 Jy
! Component: 3200  -  total flux cleaned = 0.000971246 Jy
! Component: 3250  -  total flux cleaned = 0.000999338 Jy
! Component: 3300  -  total flux cleaned = 0.0010133 Jy
! Component: 3350  -  total flux cleaned = 0.00100637 Jy
! Component: 3400  -  total flux cleaned = 0.000999541 Jy
! Component: 3450  -  total flux cleaned = 0.00100638 Jy
! Component: 3500  -  total flux cleaned = 0.00101989 Jy
! Component: 3550  -  total flux cleaned = 0.000986235 Jy
! Component: 3600  -  total flux cleaned = 0.00100628 Jy
! Component: 3650  -  total flux cleaned = 0.000999658 Jy
! Component: 3700  -  total flux cleaned = 0.000993059 Jy
! Component: 3750  -  total flux cleaned = 0.000993065 Jy
! Component: 3800  -  total flux cleaned = 0.000967108 Jy
! Component: 3850  -  total flux cleaned = 0.000947834 Jy
! Component: 3900  -  total flux cleaned = 0.000954233 Jy
! Component: 3950  -  total flux cleaned = 0.000922357 Jy
! Component: 4000  -  total flux cleaned = 0.000909736 Jy
! Component: 4050  -  total flux cleaned = 0.0009286 Jy
! Total flux subtracted in 4096 components = 0.000922321 Jy
! Clean residual min=-0.000325 max=0.000395 Jy/beam
! Clean residual mean=-0.000001 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.100291 Jy
keep
! Adding 277 model components to the UV plane model.
! The established model now contains 352 components and 0.100291 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1101+0215_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.461 x 4.188 at -3.564 degrees (North through East)
! Clean map  min=-0.00094274  max=0.08075 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1101+0215_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0807504 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00011199 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.416061 0.416061 0.832123 1.66425 3.32849 6.65698 13.314 26.6279 53.2558
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.08 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1101+0215_C_uvs.log closed on Sun May 12 14:52:46 2013