! Started logfile: /scr/pima/bp171a7_uvs/J1038-2423_C_uvs.log on Sun May 12 14:52:18 2013
obs /scr/pima/bp171a7_uvs/J1038-2423_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J1038-2423_C_uva.fits
! AN table 1: 48 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.947917 visibilities/baseline/integration-bin.
! Found source: J1038-2423
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 13104 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J1038-2423_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000663Jy  sigma=0.707519
! Fit after  self-cal, rms=0.888840Jy  sigma=0.628456
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.161 mas, bmaj=3.328 mas, bpa=-6.379 degrees
! Estimated noise=16.2224 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0843713 Jy
! Component: 100  -  total flux cleaned = 0.103007 Jy
! Total flux subtracted in 100 components = 0.103007 Jy
! Clean residual min=-0.003158 max=0.006090 Jy/beam
! Clean residual mean=0.000006 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.103007 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.103007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034109Jy  sigma=0.024112
! Fit after  self-cal, rms=0.034092Jy  sigma=0.024100
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00635787 Jy
! Component: 100  -  total flux cleaned = 0.00984792 Jy
! Total flux subtracted in 100 components = 0.00984792 Jy
! Clean residual min=-0.002813 max=0.002670 Jy/beam
! Clean residual mean=0.000005 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.112855 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 26 components and 0.112855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032338Jy  sigma=0.022859
! Fit after  self-cal, rms=0.032331Jy  sigma=0.022854
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.482 mas, bmaj=4.126 mas, bpa=-5.683 degrees
! Estimated noise=8.73903 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00396927 Jy
! Component: 100  -  total flux cleaned = 0.00637928 Jy
! Component: 150  -  total flux cleaned = 0.00794874 Jy
! Component: 200  -  total flux cleaned = 0.00899198 Jy
! Total flux subtracted in 200 components = 0.00899198 Jy
! Clean residual min=-0.001963 max=0.002288 Jy/beam
! Clean residual mean=0.000005 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.121847 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 58 components and 0.121847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031802Jy  sigma=0.022480
! Fit after  self-cal, rms=0.031784Jy  sigma=0.022467
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.01     KP        0.90     LA        1.05     
!   MK        1.06     NL        1.07     OV        0.96     PT        0.88     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        1.04     KP        0.93     LA        1.10     
!   MK        0.99     NL        1.08     OV        1.02     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     HN        1.02     KP        0.95     LA        1.03     
!   MK        1.04     NL        1.08     OV        0.98     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     HN        1.04     KP        0.95     LA        1.07     
!   MK        1.05     NL        0.96     OV        0.81     PT        1.08     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.05     KP        0.98     LA        1.09     
!   MK        1.00     NL        0.97     OV        0.94     PT        0.90     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.11     KP        1.00     LA        1.17     
!   MK        0.99     NL        0.96     OV        0.96     PT        1.00     
!   SC        1.04     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     HN        1.04     KP        0.92     LA        1.07     
!   MK        0.97     NL        1.00     OV        0.97     PT        0.95     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     HN        1.02     KP        1.00     LA        1.06     
!   MK        0.96     NL        0.96     OV        0.98     PT        0.92     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.031784Jy  sigma=0.022467
! Fit after  self-cal, rms=0.030514Jy  sigma=0.021444
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.487 mas, bmaj=4.135 mas, bpa=-5.566 degrees
! Estimated noise=8.72185 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000391474 Jy
! Component: 100  -  total flux cleaned = -0.00043841 Jy
! Component: 150  -  total flux cleaned = -0.000493839 Jy
! Component: 200  -  total flux cleaned = -0.000494469 Jy
! Total flux subtracted in 200 components = -0.000494469 Jy
! Clean residual min=-0.000904 max=0.001105 Jy/beam
! Clean residual mean=-0.000001 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.121352 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 72 components and 0.121352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030479Jy  sigma=0.021420
! Fit after  self-cal, rms=0.030495Jy  sigma=0.021414
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030495Jy  sigma=0.021414
! Fit after  self-cal, rms=0.030431Jy  sigma=0.021264
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.486 mas, bmaj=4.136 mas, bpa=-5.619 degrees
! Estimated noise=8.7258 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000140441 Jy
! Component: 100  -  total flux cleaned = -0.000150433 Jy
! Component: 150  -  total flux cleaned = -0.000166802 Jy
! Component: 200  -  total flux cleaned = -0.000166926 Jy
! Total flux subtracted in 200 components = -0.000166926 Jy
! Clean residual min=-0.000796 max=0.000742 Jy/beam
! Clean residual mean=-0.000000 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.121185 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 79 components and 0.121185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030425Jy  sigma=0.021261
! Fit after  self-cal, rms=0.030427Jy  sigma=0.021260
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.77531e-05 Jy
! Component: 100  -  total flux cleaned = 4.15689e-05 Jy
! Component: 150  -  total flux cleaned = 4.18143e-05 Jy
! Component: 200  -  total flux cleaned = 4.19438e-05 Jy
! Total flux subtracted in 200 components = 4.19438e-05 Jy
! Clean residual min=-0.000790 max=0.000739 Jy/beam
! Clean residual mean=-0.000000 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.121227 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 84 components and 0.121227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030424Jy  sigma=0.021259
! Fit after  self-cal, rms=0.030424Jy  sigma=0.021258
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030424Jy  sigma=0.021258
! Fit after  self-cal, rms=0.030480Jy  sigma=0.021229
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.486 mas, bmaj=4.138 mas, bpa=-5.63 degrees
! Estimated noise=8.7251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000131779 Jy
! Component: 100  -  total flux cleaned = -0.000178493 Jy
! Component: 150  -  total flux cleaned = -0.000195905 Jy
! Component: 200  -  total flux cleaned = -0.000206642 Jy
! Total flux subtracted in 200 components = -0.000206642 Jy
! Clean residual min=-0.000796 max=0.000719 Jy/beam
! Clean residual mean=-0.000000 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.12102 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 99 components and 0.121021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030478Jy  sigma=0.021227
! Fit after  self-cal, rms=0.030480Jy  sigma=0.021227
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.1442e-05 Jy
! Component: 100  -  total flux cleaned = -1.6573e-05 Jy
! Component: 150  -  total flux cleaned = -2.13754e-05 Jy
! Component: 200  -  total flux cleaned = -2.6016e-05 Jy
! Total flux subtracted in 200 components = -2.6016e-05 Jy
! Clean residual min=-0.000789 max=0.000717 Jy/beam
! Clean residual mean=-0.000000 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.120994 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 107 components and 0.120994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030479Jy  sigma=0.021226
! Fit after  self-cal, rms=0.030478Jy  sigma=0.021226
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030478Jy  sigma=0.021226
! Fit after  self-cal, rms=0.030491Jy  sigma=0.021226
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.52 mas, bmaj=8.989 mas, bpa=-1.725 degrees
! Estimated noise=11.5775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.63383e-05 Jy
! Component: 100  -  total flux cleaned = 2.68828e-05 Jy
! Component: 150  -  total flux cleaned = 1.76734e-05 Jy
! Component: 200  -  total flux cleaned = 9.17635e-06 Jy
! Total flux subtracted in 200 components = 9.17635e-06 Jy
! Clean residual min=-0.000814 max=0.000787 Jy/beam
! Clean residual mean=-0.000000 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.121004 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 112 components and 0.121004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030491Jy  sigma=0.021226
! Fit after  self-cal, rms=0.030491Jy  sigma=0.021226
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.70084e-05 Jy
! Component: 100  -  total flux cleaned = 1.70072e-05 Jy
! Component: 150  -  total flux cleaned = 2.08567e-05 Jy
! Component: 200  -  total flux cleaned = 2.0977e-05 Jy
! Total flux subtracted in 200 components = 2.0977e-05 Jy
! Clean residual min=-0.000813 max=0.000786 Jy/beam
! Clean residual mean=-0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.121025 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 113 components and 0.121025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030492Jy  sigma=0.021226
! Fit after  self-cal, rms=0.030492Jy  sigma=0.021226
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.486 mas, bmaj=4.139 mas, bpa=-5.632 degrees
! Estimated noise=8.7231 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.486 x 4.139 at -5.632 degrees (North through East)
! Clean map  min=-0.00092097  max=0.10958 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.165 mas, bmaj=3.329 mas, bpa=-6.25 degrees
! Estimated noise=16.2791 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.08437 Jy
! Component: 100  -  total flux cleaned = 0.102933 Jy
! Component: 150  -  total flux cleaned = 0.109008 Jy
! Component: 200  -  total flux cleaned = 0.112298 Jy
! Total flux subtracted in 200 components = 0.112298 Jy
! Clean residual min=-0.001843 max=0.001751 Jy/beam
! Clean residual mean=0.000001 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.112298 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.112298 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.486 mas, bmaj=4.139 mas, bpa=-5.632 degrees
! Estimated noise=8.7231 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00353859 Jy
! Component: 100  -  total flux cleaned = 0.00547192 Jy
! Component: 150  -  total flux cleaned = 0.0067101 Jy
! Component: 200  -  total flux cleaned = 0.00744591 Jy
! Total flux subtracted in 200 components = 0.00744591 Jy
! Clean residual min=-0.000797 max=0.000806 Jy/beam
! Clean residual mean=-0.000000 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.119744 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 58 components and 0.119744 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.52 mas, bmaj=8.989 mas, bpa=-1.725 degrees
! Estimated noise=11.5775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00088457 Jy
! Component: 100  -  total flux cleaned = 0.0011314 Jy
! Component: 150  -  total flux cleaned = 0.00120676 Jy
! Component: 200  -  total flux cleaned = 0.00123681 Jy
! Total flux subtracted in 200 components = 0.00123681 Jy
! Clean residual min=-0.000813 max=0.000781 Jy/beam
! Clean residual mean=-0.000000 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.120981 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.74619e-06 Jy
! Component: 100  -  total flux cleaned = 2.41776e-05 Jy
! Component: 150  -  total flux cleaned = 3.11366e-05 Jy
! Component: 200  -  total flux cleaned = 3.76256e-05 Jy
! Total flux subtracted in 200 components = 3.76256e-05 Jy
! Clean residual min=-0.000818 max=0.000784 Jy/beam
! Clean residual mean=-0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.121018 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 71 components and 0.121018 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.486 mas, bmaj=4.139 mas, bpa=-5.632 degrees
! Estimated noise=8.7231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000129734 Jy
! Component: 100  -  total flux cleaned = -9.56022e-05 Jy
! Component: 150  -  total flux cleaned = -9.51588e-05 Jy
! Component: 200  -  total flux cleaned = -0.000103666 Jy
! Total flux subtracted in 200 components = -0.000103666 Jy
! Clean residual min=-0.000770 max=0.000726 Jy/beam
! Clean residual mean=-0.000000 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.120915 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 78 components and 0.120915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030497Jy  sigma=0.021229
! Fit after  self-cal, rms=0.030496Jy  sigma=0.021228
wmodel /scr/pima/bp171a7_uvs/J1038-2423_C_map.mod
! Writing 78 model components to file: /scr/pima/bp171a7_uvs/J1038-2423_C_map.mod
wobs /scr/pima/bp171a7_uvs/J1038-2423_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J1038-2423_C_uvs.fits
wwins /scr/pima/bp171a7_uvs/J1038-2423_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a7_uvs/J1038-2423_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000173326 Jy
! Component: 100  -  total flux cleaned = -0.000290841 Jy
! Component: 150  -  total flux cleaned = -0.000328226 Jy
! Component: 200  -  total flux cleaned = -0.00040061 Jy
! Component: 250  -  total flux cleaned = -0.000505005 Jy
! Component: 300  -  total flux cleaned = -0.000527379 Jy
! Component: 350  -  total flux cleaned = -0.000527554 Jy
! Component: 400  -  total flux cleaned = -0.000549397 Jy
! Component: 450  -  total flux cleaned = -0.000559929 Jy
! Component: 500  -  total flux cleaned = -0.000570224 Jy
! Component: 550  -  total flux cleaned = -0.000570093 Jy
! Component: 600  -  total flux cleaned = -0.000550174 Jy
! Component: 650  -  total flux cleaned = -0.000530703 Jy
! Component: 700  -  total flux cleaned = -0.000492649 Jy
! Component: 750  -  total flux cleaned = -0.00050222 Jy
! Component: 800  -  total flux cleaned = -0.000502175 Jy
! Component: 850  -  total flux cleaned = -0.000456292 Jy
! Component: 900  -  total flux cleaned = -0.000438366 Jy
! Component: 950  -  total flux cleaned = -0.00044731 Jy
! Component: 1000  -  total flux cleaned = -0.000447212 Jy
! Component: 1050  -  total flux cleaned = -0.000447166 Jy
! Component: 1100  -  total flux cleaned = -0.000446994 Jy
! Component: 1150  -  total flux cleaned = -0.000455425 Jy
! Component: 1200  -  total flux cleaned = -0.000438604 Jy
! Component: 1250  -  total flux cleaned = -0.000422181 Jy
! Component: 1300  -  total flux cleaned = -0.000405826 Jy
! Component: 1350  -  total flux cleaned = -0.000373628 Jy
! Component: 1400  -  total flux cleaned = -0.000381508 Jy
! Component: 1450  -  total flux cleaned = -0.000342127 Jy
! Component: 1500  -  total flux cleaned = -0.000287742 Jy
! Component: 1550  -  total flux cleaned = -0.000272254 Jy
! Component: 1600  -  total flux cleaned = -0.000226703 Jy
! Component: 1650  -  total flux cleaned = -0.000211723 Jy
! Component: 1700  -  total flux cleaned = -0.000189349 Jy
! Component: 1750  -  total flux cleaned = -0.000145161 Jy
! Component: 1800  -  total flux cleaned = -0.000137964 Jy
! Component: 1850  -  total flux cleaned = -8.72598e-05 Jy
! Component: 1900  -  total flux cleaned = -6.57546e-05 Jy
! Component: 1950  -  total flux cleaned = -2.30554e-05 Jy
! Component: 2000  -  total flux cleaned = -8.96811e-06 Jy
! Component: 2050  -  total flux cleaned = 1.2065e-05 Jy
! Component: 2100  -  total flux cleaned = 2.59317e-05 Jy
! Component: 2150  -  total flux cleaned = 7.39715e-05 Jy
! Component: 2200  -  total flux cleaned = 6.71722e-05 Jy
! Component: 2250  -  total flux cleaned = 7.39751e-05 Jy
! Component: 2300  -  total flux cleaned = 9.40933e-05 Jy
! Component: 2350  -  total flux cleaned = 7.41051e-05 Jy
! Component: 2400  -  total flux cleaned = 9.40269e-05 Jy
! Component: 2450  -  total flux cleaned = 0.000126784 Jy
! Component: 2500  -  total flux cleaned = 0.000120238 Jy
! Component: 2550  -  total flux cleaned = 0.000152555 Jy
! Component: 2600  -  total flux cleaned = 0.000165401 Jy
! Component: 2650  -  total flux cleaned = 0.000197279 Jy
! Component: 2700  -  total flux cleaned = 0.000235151 Jy
! Component: 2750  -  total flux cleaned = 0.000247785 Jy
! Component: 2800  -  total flux cleaned = 0.000260261 Jy
! Component: 2850  -  total flux cleaned = 0.000285052 Jy
! Component: 2900  -  total flux cleaned = 0.000297331 Jy
! Component: 2950  -  total flux cleaned = 0.000285074 Jy
! Component: 3000  -  total flux cleaned = 0.000297181 Jy
! Component: 3050  -  total flux cleaned = 0.000321338 Jy
! Component: 3100  -  total flux cleaned = 0.000339335 Jy
! Component: 3150  -  total flux cleaned = 0.000345351 Jy
! Component: 3200  -  total flux cleaned = 0.00036907 Jy
! Component: 3250  -  total flux cleaned = 0.00039266 Jy
! Component: 3300  -  total flux cleaned = 0.000404356 Jy
! Component: 3350  -  total flux cleaned = 0.000421827 Jy
! Component: 3400  -  total flux cleaned = 0.000415975 Jy
! Component: 3450  -  total flux cleaned = 0.000416021 Jy
! Component: 3500  -  total flux cleaned = 0.000433118 Jy
! Component: 3550  -  total flux cleaned = 0.000450169 Jy
! Component: 3600  -  total flux cleaned = 0.000455767 Jy
! Component: 3650  -  total flux cleaned = 0.000472673 Jy
! Component: 3700  -  total flux cleaned = 0.000483804 Jy
! Component: 3750  -  total flux cleaned = 0.000511571 Jy
! Component: 3800  -  total flux cleaned = 0.000505988 Jy
! Component: 3850  -  total flux cleaned = 0.000511554 Jy
! Component: 3900  -  total flux cleaned = 0.000544373 Jy
! Component: 3950  -  total flux cleaned = 0.000528047 Jy
! Component: 4000  -  total flux cleaned = 0.0005335 Jy
! Component: 4050  -  total flux cleaned = 0.000533553 Jy
! Total flux subtracted in 4096 components = 0.000549662 Jy
! Clean residual min=-0.000313 max=0.000294 Jy/beam
! Clean residual mean=-0.000000 rms=0.000098 Jy/beam
! Combined flux in latest and established models = 0.121464 Jy
keep
! Adding 308 model components to the UV plane model.
! The established model now contains 386 components and 0.121464 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J1038-2423_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.486 x 4.139 at -5.632 degrees (North through East)
! Clean map  min=-0.00062879  max=0.10947 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J1038-2423_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.109468 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.80501e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.268709 0.268709 0.537417 1.07483 2.14967 4.29934 8.59867 17.1973 34.3947 68.7894
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.109 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J1038-2423_C_uvs.log closed on Sun May 12 14:52:23 2013