! Started logfile: /scr/pima/bp171a7_uvs/J0952+2828_C_uvs.log on Sun May 12 14:51:43 2013
obs /scr/pima/bp171a7_uvs/J0952+2828_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J0952+2828_C_uva.fits
! AN table 1: 160 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.535069 visibilities/baseline/integration-bin.
! Found source: J0952+2828
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 24656 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J0952+2828_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 177 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 177 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 177 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 177 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 177 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 177 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 177 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 177 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000410Jy  sigma=0.707335
! Fit after  self-cal, rms=0.985220Jy  sigma=0.696600
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.239 mas, bmaj=3.386 mas, bpa=-9.91 degrees
! Estimated noise=12.6251 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103688 Jy
! Component: 100  -  total flux cleaned = 0.0131585 Jy
! Total flux subtracted in 100 components = 0.0131585 Jy
! Clean residual min=-0.001318 max=0.001732 Jy/beam
! Clean residual mean=0.000001 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.0131585 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0131585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025147Jy  sigma=0.017778
! Fit after  self-cal, rms=0.023698Jy  sigma=0.016753
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00340589 Jy
! Component: 100  -  total flux cleaned = 0.0051748 Jy
! Total flux subtracted in 100 components = 0.0051748 Jy
! Clean residual min=-0.001176 max=0.001541 Jy/beam
! Clean residual mean=0.000001 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.0183333 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.0183333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022862Jy  sigma=0.016162
! Fit after  self-cal, rms=0.022849Jy  sigma=0.016153
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.414 mas, bmaj=3.65 mas, bpa=-8.084 degrees
! Estimated noise=6.38358 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0034306 Jy
! Component: 100  -  total flux cleaned = 0.00597938 Jy
! Component: 150  -  total flux cleaned = 0.00802818 Jy
! Component: 200  -  total flux cleaned = 0.00969257 Jy
! Total flux subtracted in 200 components = 0.00969257 Jy
! Clean residual min=-0.001989 max=0.002189 Jy/beam
! Clean residual mean=0.000001 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.0280259 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 41 components and 0.0280259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022106Jy  sigma=0.015628
! Fit after  self-cal, rms=0.022015Jy  sigma=0.015563
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.13     HN        1.07     KP        0.50     LA        0.84     
!   MK        1.46     NL        1.68     OV        0.67     PT        1.07     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     HN        1.29     KP        0.45     LA        0.70     
!   MK        1.43     NL        1.92     OV        0.75     PT        0.90     
!   SC        1.28     
! 
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.42     KP        0.39     LA        0.56     
!   MK        1.67     NL        2.16     OV        0.84     PT        0.75     
!   SC        1.52     
! 
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.88     HN        1.49     KP        0.41     LA        0.61     
!   MK        1.82     NL        2.08     OV        0.96     PT        0.63     
!   SC        1.69     
! 
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     HN        1.03     KP        0.70     LA        0.92     
!   MK        1.25     NL        1.33     OV        0.71     PT        0.90     
!   SC        1.14     
! 
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.42     KP        0.49     LA        0.89     
!   MK        1.51     NL        1.45     OV        0.91     PT        1.24     
!   SC        1.35     
! 
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.73     HN        1.20     KP        0.55     LA        0.77     
!   MK        1.40     NL        1.46     OV        0.96     PT        1.11     
!   SC        1.27     
! 
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.74     HN        1.19     KP        0.66     LA        0.73     
!   MK        1.19     NL        1.44     OV        0.94     PT        0.95     
!   SC        1.20     
! 
! 
! Fit before self-cal, rms=0.022015Jy  sigma=0.015563
! Fit after  self-cal, rms=0.027254Jy  sigma=0.014547
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.506 mas, bmaj=3.88 mas, bpa=-6.194 degrees
! Estimated noise=6.55947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.04395e-05 Jy
! Component: 100  -  total flux cleaned = 1.36089e-05 Jy
! Component: 150  -  total flux cleaned = 1.25341e-05 Jy
! Component: 200  -  total flux cleaned = -9.55239e-06 Jy
! Total flux subtracted in 200 components = -9.55239e-06 Jy
! Clean residual min=-0.001301 max=0.001583 Jy/beam
! Clean residual mean=0.000000 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.0280163 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 49 components and 0.0280163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027166Jy  sigma=0.014527
! Fit after  self-cal, rms=0.027884Jy  sigma=0.014342
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027884Jy  sigma=0.014342
! Fit after  self-cal, rms=0.031675Jy  sigma=0.014259
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.509 mas, bmaj=3.909 mas, bpa=-6.711 degrees
! Estimated noise=6.74488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.95878e-05 Jy
! Component: 100  -  total flux cleaned = 3.90988e-05 Jy
! Component: 150  -  total flux cleaned = 5.76721e-05 Jy
! Component: 200  -  total flux cleaned = 2.3065e-05 Jy
! Total flux subtracted in 200 components = 2.3065e-05 Jy
! Clean residual min=-0.000955 max=0.001287 Jy/beam
! Clean residual mean=0.000000 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.0280394 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 54 components and 0.0280394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031621Jy  sigma=0.014252
! Fit after  self-cal, rms=0.031790Jy  sigma=0.014241
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.4, 4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000810185 Jy
! Component: 100  -  total flux cleaned = 0.00102101 Jy
! Component: 150  -  total flux cleaned = 0.00127915 Jy
! Component: 200  -  total flux cleaned = 0.0014598 Jy
! Total flux subtracted in 200 components = 0.0014598 Jy
! Clean residual min=-0.000836 max=0.001106 Jy/beam
! Clean residual mean=0.000000 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.0294992 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 72 components and 0.0294992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031720Jy  sigma=0.014193
! Fit after  self-cal, rms=0.031645Jy  sigma=0.014175
! Inverting map 
! Added new window around map position (61.2, 36.3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000904521 Jy
! Component: 100  -  total flux cleaned = 0.00127722 Jy
! Component: 150  -  total flux cleaned = 0.00160521 Jy
! Component: 200  -  total flux cleaned = 0.00185009 Jy
! Total flux subtracted in 200 components = 0.00185009 Jy
! Clean residual min=-0.000756 max=0.000883 Jy/beam
! Clean residual mean=0.000000 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.0313493 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 81 components and 0.0313493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031587Jy  sigma=0.014128
! Fit after  self-cal, rms=0.031532Jy  sigma=0.014115
! Inverting map 
! Added new window around map position (-52.2, -71.1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000675981 Jy
! Component: 100  -  total flux cleaned = 0.000967719 Jy
! Component: 150  -  total flux cleaned = 0.00121839 Jy
! Component: 200  -  total flux cleaned = 0.00140693 Jy
! Total flux subtracted in 200 components = 0.00140693 Jy
! Clean residual min=-0.000746 max=0.000795 Jy/beam
! Clean residual mean=0.000000 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.0327562 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 97 components and 0.0327562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031489Jy  sigma=0.014080
! Fit after  self-cal, rms=0.031430Jy  sigma=0.014072
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031430Jy  sigma=0.014072
! Fit after  self-cal, rms=0.030329Jy  sigma=0.013945
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.501 mas, bmaj=3.929 mas, bpa=-7.426 degrees
! Estimated noise=6.74769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000652166 Jy
! Component: 100  -  total flux cleaned = 0.00096759 Jy
! Component: 150  -  total flux cleaned = 0.00113909 Jy
! Component: 200  -  total flux cleaned = 0.00122285 Jy
! Total flux subtracted in 200 components = 0.00122285 Jy
! Clean residual min=-0.000600 max=0.000727 Jy/beam
! Clean residual mean=0.000000 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.0339791 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 114 components and 0.0339791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030302Jy  sigma=0.013925
! Fit after  self-cal, rms=0.030220Jy  sigma=0.013892
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000259815 Jy
! Component: 100  -  total flux cleaned = 0.000376274 Jy
! Component: 150  -  total flux cleaned = 0.000487863 Jy
! Component: 200  -  total flux cleaned = 0.000588836 Jy
! Total flux subtracted in 200 components = 0.000588836 Jy
! Clean residual min=-0.000629 max=0.000652 Jy/beam
! Clean residual mean=0.000000 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.0345679 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 137 components and 0.0345679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030184Jy  sigma=0.013874
! Fit after  self-cal, rms=0.030134Jy  sigma=0.013869
! Inverting map 
! Added new window around map position (-14.7, 49.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000203707 Jy
! Component: 100  -  total flux cleaned = 0.000277114 Jy
! Component: 150  -  total flux cleaned = 0.000357921 Jy
! Component: 200  -  total flux cleaned = 0.000416871 Jy
! Total flux subtracted in 200 components = 0.000416871 Jy
! Clean residual min=-0.000527 max=0.000600 Jy/beam
! Clean residual mean=0.000000 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.0349848 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 149 components and 0.0349848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030098Jy  sigma=0.013853
! Fit after  self-cal, rms=0.030060Jy  sigma=0.013848
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030060Jy  sigma=0.013848
! Fit after  self-cal, rms=0.029379Jy  sigma=0.013831
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.607 mas, bmaj=5.402 mas, bpa=-11.89 degrees
! Estimated noise=8.24389 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000705954 Jy
! Component: 100  -  total flux cleaned = 0.000988757 Jy
! Component: 150  -  total flux cleaned = 0.00112124 Jy
! Component: 200  -  total flux cleaned = 0.00110977 Jy
! Total flux subtracted in 200 components = 0.00110977 Jy
! Clean residual min=-0.000578 max=0.000614 Jy/beam
! Clean residual mean=0.000001 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.0360946 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 174 components and 0.0360946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029362Jy  sigma=0.013818
! Fit after  self-cal, rms=0.029297Jy  sigma=0.013811
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000285216 Jy
! Component: 100  -  total flux cleaned = 0.000353069 Jy
! Component: 150  -  total flux cleaned = 0.000340404 Jy
! Component: 200  -  total flux cleaned = 0.000305705 Jy
! Total flux subtracted in 200 components = 0.000305705 Jy
! Clean residual min=-0.000553 max=0.000633 Jy/beam
! Clean residual mean=0.000001 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.0364003 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 186 components and 0.0364003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029284Jy  sigma=0.013806
! Fit after  self-cal, rms=0.029265Jy  sigma=0.013805
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.499 mas, bmaj=3.928 mas, bpa=-7.445 degrees
! Estimated noise=6.68819 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.499 x 3.928 at -7.445 degrees (North through East)
! Clean map  min=-0.0010107  max=0.019613 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.308 mas, bmaj=3.563 mas, bpa=-8.818 degrees
! Estimated noise=13.6844 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128074 Jy
! Component: 100  -  total flux cleaned = 0.0161522 Jy
! Component: 150  -  total flux cleaned = 0.0184071 Jy
! Component: 200  -  total flux cleaned = 0.0202286 Jy
! Total flux subtracted in 200 components = 0.0202286 Jy
! Clean residual min=-0.001420 max=0.001502 Jy/beam
! Clean residual mean=0.000000 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.0202286 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0202286 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.499 mas, bmaj=3.928 mas, bpa=-7.445 degrees
! Estimated noise=6.68819 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00320663 Jy
! Component: 100  -  total flux cleaned = 0.00561881 Jy
! Component: 150  -  total flux cleaned = 0.00755736 Jy
! Component: 200  -  total flux cleaned = 0.00895461 Jy
! Total flux subtracted in 200 components = 0.00895461 Jy
! Clean residual min=-0.001077 max=0.001121 Jy/beam
! Clean residual mean=0.000001 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.0291832 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 38 components and 0.0291832 Jy
! Inverting map 
! Added new window around map position (40.5, 36).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107734 Jy
! Component: 100  -  total flux cleaned = 0.00190104 Jy
! Component: 150  -  total flux cleaned = 0.00255448 Jy
! Component: 200  -  total flux cleaned = 0.00303218 Jy
! Total flux subtracted in 200 components = 0.00303218 Jy
! Clean residual min=-0.000798 max=0.000828 Jy/beam
! Clean residual mean=0.000000 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.0322154 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 58 components and 0.0322154 Jy
! Inverting map 
! Added new window around map position (-9.3, -29.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000521108 Jy
! Component: 100  -  total flux cleaned = 0.000886911 Jy
! Component: 150  -  total flux cleaned = 0.00124899 Jy
! Component: 200  -  total flux cleaned = 0.00160551 Jy
! Total flux subtracted in 200 components = 0.00160551 Jy
! Clean residual min=-0.000635 max=0.000673 Jy/beam
! Clean residual mean=0.000000 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.0338209 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 78 components and 0.0338209 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.607 mas, bmaj=5.402 mas, bpa=-11.89 degrees
! Estimated noise=8.24389 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000960828 Jy
! Component: 100  -  total flux cleaned = 0.00153113 Jy
! Component: 150  -  total flux cleaned = 0.00184821 Jy
! Component: 200  -  total flux cleaned = 0.00195342 Jy
! Total flux subtracted in 200 components = 0.00195342 Jy
! Clean residual min=-0.000629 max=0.000705 Jy/beam
! Clean residual mean=0.000001 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.0357743 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.77841e-05 Jy
! Component: 100  -  total flux cleaned = 0.000128317 Jy
! Component: 150  -  total flux cleaned = 0.000171901 Jy
! Component: 200  -  total flux cleaned = 0.000186173 Jy
! Total flux subtracted in 200 components = 0.000186173 Jy
! Clean residual min=-0.000563 max=0.000632 Jy/beam
! Clean residual mean=0.000001 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.0359605 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 129 components and 0.0359604 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.499 mas, bmaj=3.928 mas, bpa=-7.445 degrees
! Estimated noise=6.68819 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107148 Jy
! Component: 100  -  total flux cleaned = 7.22361e-05 Jy
! Component: 150  -  total flux cleaned = 7.19998e-05 Jy
! Component: 200  -  total flux cleaned = 0.000101655 Jy
! Total flux subtracted in 200 components = 0.000101655 Jy
! Clean residual min=-0.000480 max=0.000552 Jy/beam
! Clean residual mean=0.000000 rms=0.000130 Jy/beam
! Combined flux in latest and established models = 0.0360621 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 158 components and 0.0360621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029250Jy  sigma=0.013804
! Fit after  self-cal, rms=0.029212Jy  sigma=0.013796
wmodel /scr/pima/bp171a7_uvs/J0952+2828_C_map.mod
! Writing 158 model components to file: /scr/pima/bp171a7_uvs/J0952+2828_C_map.mod
wobs /scr/pima/bp171a7_uvs/J0952+2828_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J0952+2828_C_uvs.fits
wwins /scr/pima/bp171a7_uvs/J0952+2828_C_map.win
! wwins: Wrote 8 windows to /scr/pima/bp171a7_uvs/J0952+2828_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.76916e-05 Jy
! Component: 100  -  total flux cleaned = 4.7694e-05 Jy
! Component: 150  -  total flux cleaned = 6.49087e-05 Jy
! Component: 200  -  total flux cleaned = 5.66363e-05 Jy
! Component: 250  -  total flux cleaned = 2.43125e-05 Jy
! Component: 300  -  total flux cleaned = -2.29366e-05 Jy
! Component: 350  -  total flux cleaned = -7.69816e-05 Jy
! Component: 400  -  total flux cleaned = -0.000137365 Jy
! Component: 450  -  total flux cleaned = -0.000152065 Jy
! Component: 500  -  total flux cleaned = -0.000144731 Jy
! Component: 550  -  total flux cleaned = -0.000159073 Jy
! Component: 600  -  total flux cleaned = -0.000166014 Jy
! Component: 650  -  total flux cleaned = -0.000159061 Jy
! Component: 700  -  total flux cleaned = -0.000200422 Jy
! Component: 750  -  total flux cleaned = -0.000220666 Jy
! Component: 800  -  total flux cleaned = -0.000220631 Jy
! Component: 850  -  total flux cleaned = -0.000247026 Jy
! Component: 900  -  total flux cleaned = -0.000247092 Jy
! Component: 950  -  total flux cleaned = -0.000279337 Jy
! Component: 1000  -  total flux cleaned = -0.000279304 Jy
! Component: 1050  -  total flux cleaned = -0.000291899 Jy
! Component: 1100  -  total flux cleaned = -0.000285577 Jy
! Component: 1150  -  total flux cleaned = -0.000298032 Jy
! Component: 1200  -  total flux cleaned = -0.000298143 Jy
! Component: 1250  -  total flux cleaned = -0.000340624 Jy
! Component: 1300  -  total flux cleaned = -0.000340619 Jy
! Component: 1350  -  total flux cleaned = -0.000358575 Jy
! Component: 1400  -  total flux cleaned = -0.000376306 Jy
! Component: 1450  -  total flux cleaned = -0.000387999 Jy
! Component: 1500  -  total flux cleaned = -0.000399636 Jy
! Component: 1550  -  total flux cleaned = -0.000399629 Jy
! Component: 1600  -  total flux cleaned = -0.000428138 Jy
! Component: 1650  -  total flux cleaned = -0.000433804 Jy
! Component: 1700  -  total flux cleaned = -0.000439388 Jy
! Component: 1750  -  total flux cleaned = -0.000461711 Jy
! Component: 1800  -  total flux cleaned = -0.0004562 Jy
! Component: 1850  -  total flux cleaned = -0.000483697 Jy
! Component: 1900  -  total flux cleaned = -0.000489153 Jy
! Component: 1950  -  total flux cleaned = -0.000521617 Jy
! Component: 2000  -  total flux cleaned = -0.000521613 Jy
! Component: 2050  -  total flux cleaned = -0.000542984 Jy
! Component: 2100  -  total flux cleaned = -0.000553598 Jy
! Component: 2150  -  total flux cleaned = -0.000579916 Jy
! Component: 2200  -  total flux cleaned = -0.000605972 Jy
! Component: 2250  -  total flux cleaned = -0.000605984 Jy
! Component: 2300  -  total flux cleaned = -0.000621435 Jy
! Component: 2350  -  total flux cleaned = -0.000652123 Jy
! Component: 2400  -  total flux cleaned = -0.000672432 Jy
! Component: 2450  -  total flux cleaned = -0.00067751 Jy
! Component: 2500  -  total flux cleaned = -0.000682569 Jy
! Component: 2550  -  total flux cleaned = -0.00067253 Jy
! Component: 2600  -  total flux cleaned = -0.000667571 Jy
! Component: 2650  -  total flux cleaned = -0.000672486 Jy
! Component: 2700  -  total flux cleaned = -0.000672496 Jy
! Component: 2750  -  total flux cleaned = -0.000672455 Jy
! Component: 2800  -  total flux cleaned = -0.000682092 Jy
! Component: 2850  -  total flux cleaned = -0.000672421 Jy
! Component: 2900  -  total flux cleaned = -0.000672405 Jy
! Component: 2950  -  total flux cleaned = -0.00066288 Jy
! Component: 3000  -  total flux cleaned = -0.000658141 Jy
! Component: 3050  -  total flux cleaned = -0.000648681 Jy
! Component: 3100  -  total flux cleaned = -0.000662851 Jy
! Component: 3150  -  total flux cleaned = -0.000648853 Jy
! Component: 3200  -  total flux cleaned = -0.000653513 Jy
! Component: 3250  -  total flux cleaned = -0.000667424 Jy
! Component: 3300  -  total flux cleaned = -0.000648964 Jy
! Component: 3350  -  total flux cleaned = -0.000671913 Jy
! Component: 3400  -  total flux cleaned = -0.000671886 Jy
! Component: 3450  -  total flux cleaned = -0.000667284 Jy
! Component: 3500  -  total flux cleaned = -0.00064917 Jy
! Component: 3550  -  total flux cleaned = -0.000640166 Jy
! Component: 3600  -  total flux cleaned = -0.00065803 Jy
! Component: 3650  -  total flux cleaned = -0.000666913 Jy
! Component: 3700  -  total flux cleaned = -0.000644752 Jy
! Component: 3750  -  total flux cleaned = -0.00065801 Jy
! Component: 3800  -  total flux cleaned = -0.000636048 Jy
! Component: 3850  -  total flux cleaned = -0.000636062 Jy
! Component: 3900  -  total flux cleaned = -0.000636027 Jy
! Component: 3950  -  total flux cleaned = -0.000631714 Jy
! Component: 4000  -  total flux cleaned = -0.000644678 Jy
! Component: 4050  -  total flux cleaned = -0.000614618 Jy
! Total flux subtracted in 4096 components = -0.000640311 Jy
! Clean residual min=-0.000243 max=0.000249 Jy/beam
! Clean residual mean=0.000000 rms=0.000078 Jy/beam
! Combined flux in latest and established models = 0.0354218 Jy
keep
! Adding 315 model components to the UV plane model.
! The established model now contains 468 components and 0.0354218 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J0952+2828_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.499 x 3.928 at -7.445 degrees (North through East)
! Clean map  min=-0.00081875  max=0.019677 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J0952+2828_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0196774 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.81379e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.19129 1.19129 2.38257 4.76515 9.5303 19.0606 38.1212 76.2424
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.019 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J0952+2828_C_uvs.log closed on Sun May 12 14:51:49 2013