! Started logfile: /scr/pima/bp171a7_uvs/J0746-0220_X_uvs.log on Sun May 12 14:01:19 2013
obs /scr/pima/bp171a7_uvs/J0746-0220_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J0746-0220_X_uva.fits
! AN table 1: 45 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.568254 visibilities/baseline/integration-bin.
! Found source: J0746-0220
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4296 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J0746-0220_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001301Jy  sigma=0.707993
! Fit after  self-cal, rms=0.984905Jy  sigma=0.696399
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.624 mas, bmaj=6.066 mas, bpa=-24.27 degrees
! Estimated noise=24.8988 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125283 Jy
! Component: 100  -  total flux cleaned = 0.0157577 Jy
! Total flux subtracted in 100 components = 0.0157577 Jy
! Clean residual min=-0.001722 max=0.001561 Jy/beam
! Clean residual mean=-0.000001 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.0157577 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0157577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022732Jy  sigma=0.016073
! Fit after  self-cal, rms=0.020714Jy  sigma=0.014647
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00327259 Jy
! Component: 100  -  total flux cleaned = 0.00401419 Jy
! Total flux subtracted in 100 components = 0.00401419 Jy
! Clean residual min=-0.001721 max=0.001470 Jy/beam
! Clean residual mean=0.000002 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.0197719 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 48 components and 0.0197718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020397Jy  sigma=0.014422
! Fit after  self-cal, rms=0.020387Jy  sigma=0.014415
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.141 mas, bmaj=6.067 mas, bpa=-22.47 degrees
! Estimated noise=16.3264 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000551343 Jy
! Component: 100  -  total flux cleaned = 0.00075958 Jy
! Component: 150  -  total flux cleaned = 0.000826933 Jy
! Component: 200  -  total flux cleaned = 0.000872831 Jy
! Total flux subtracted in 200 components = 0.000872831 Jy
! Clean residual min=-0.001111 max=0.001171 Jy/beam
! Clean residual mean=0.000003 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.0206447 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 69 components and 0.0206447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020364Jy  sigma=0.014399
! Fit after  self-cal, rms=0.020359Jy  sigma=0.014396
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.11     HN        1.00*    KP        0.88     LA        1.04     
!   NL        0.92     OV        0.82     PT        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.13     HN        1.00*    KP        0.99     LA        1.02     
!   NL        1.08     OV        0.98     PT        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.25     HN        1.00*    KP        1.26     LA        0.91     
!   NL        1.10     OV        0.90     PT        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.38     HN        1.00*    KP        0.94     LA        0.91     
!   NL        1.11     OV        0.81     PT        1.11     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.00*    KP        1.16     LA        1.09     
!   NL        0.92     OV        1.01     PT        0.84     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.16     HN        1.00*    KP        1.13     LA        1.03     
!   NL        1.02     OV        0.72     PT        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.00*    KP        1.07     LA        0.86     
!   NL        1.03     OV        0.84     PT        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     HN        1.00*    KP        1.16     LA        0.89     
!   NL        0.87     OV        0.97     PT        0.91     
! 
! 
! Fit before self-cal, rms=0.020359Jy  sigma=0.014396
! Fit after  self-cal, rms=0.020688Jy  sigma=0.014267
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.113 mas, bmaj=6.1 mas, bpa=-20.59 degrees
! Estimated noise=16.4591 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.63835e-06 Jy
! Component: 100  -  total flux cleaned = -7.80972e-05 Jy
! Component: 150  -  total flux cleaned = -9.78385e-05 Jy
! Component: 200  -  total flux cleaned = -0.000105928 Jy
! Total flux subtracted in 200 components = -0.000105928 Jy
! Clean residual min=-0.000806 max=0.000800 Jy/beam
! Clean residual mean=0.000002 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0205387 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 85 components and 0.0205387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020675Jy  sigma=0.014256
! Fit after  self-cal, rms=0.020773Jy  sigma=0.014225
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020773Jy  sigma=0.014225
! Fit after  self-cal, rms=0.021442Jy  sigma=0.014180
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.116 mas, bmaj=6.121 mas, bpa=-20.17 degrees
! Estimated noise=16.6145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.85942e-05 Jy
! Component: 100  -  total flux cleaned = -6.72959e-05 Jy
! Component: 150  -  total flux cleaned = -6.08003e-05 Jy
! Component: 200  -  total flux cleaned = -4.77066e-05 Jy
! Total flux subtracted in 200 components = -4.77066e-05 Jy
! Clean residual min=-0.000831 max=0.000659 Jy/beam
! Clean residual mean=0.000001 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.020491 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 100 components and 0.020491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021435Jy  sigma=0.014174
! Fit after  self-cal, rms=0.021510Jy  sigma=0.014163
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.27929e-05 Jy
! Component: 100  -  total flux cleaned = -6.40975e-05 Jy
! Component: 150  -  total flux cleaned = -6.39342e-05 Jy
! Component: 200  -  total flux cleaned = -5.85022e-05 Jy
! Total flux subtracted in 200 components = -5.85022e-05 Jy
! Clean residual min=-0.000847 max=0.000705 Jy/beam
! Clean residual mean=0.000002 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.0204325 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 113 components and 0.0204325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021506Jy  sigma=0.014158
! Fit after  self-cal, rms=0.021505Jy  sigma=0.014157
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021505Jy  sigma=0.014157
! Fit after  self-cal, rms=0.021962Jy  sigma=0.014143
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.117 mas, bmaj=6.141 mas, bpa=-20.25 degrees
! Estimated noise=16.6184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.50429e-05 Jy
! Component: 100  -  total flux cleaned = -9.34765e-05 Jy
! Component: 150  -  total flux cleaned = -8.73538e-05 Jy
! Component: 200  -  total flux cleaned = -8.74449e-05 Jy
! Total flux subtracted in 200 components = -8.74449e-05 Jy
! Clean residual min=-0.000827 max=0.000714 Jy/beam
! Clean residual mean=0.000001 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.0203451 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 117 components and 0.0203451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021959Jy  sigma=0.014140
! Fit after  self-cal, rms=0.022013Jy  sigma=0.014133
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.85059e-06 Jy
! Component: 100  -  total flux cleaned = -2.95434e-06 Jy
! Component: 150  -  total flux cleaned = 8.69035e-06 Jy
! Component: 200  -  total flux cleaned = 8.75871e-06 Jy
! Total flux subtracted in 200 components = 8.75871e-06 Jy
! Clean residual min=-0.000815 max=0.000707 Jy/beam
! Clean residual mean=0.000001 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.0203539 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 125 components and 0.0203538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022010Jy  sigma=0.014130
! Fit after  self-cal, rms=0.022010Jy  sigma=0.014130
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022010Jy  sigma=0.014130
! Fit after  self-cal, rms=0.022189Jy  sigma=0.014128
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.315 mas, bmaj=6.346 mas, bpa=-20.77 degrees
! Estimated noise=16.6853 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.10681e-05 Jy
! Component: 100  -  total flux cleaned = -5.95536e-05 Jy
! Component: 150  -  total flux cleaned = -4.97618e-05 Jy
! Component: 200  -  total flux cleaned = -4.15524e-05 Jy
! Total flux subtracted in 200 components = -4.15524e-05 Jy
! Clean residual min=-0.000809 max=0.000685 Jy/beam
! Clean residual mean=0.000001 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.0203123 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 136 components and 0.0203123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022186Jy  sigma=0.014126
! Fit after  self-cal, rms=0.022213Jy  sigma=0.014124
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.44386e-06 Jy
! Component: 100  -  total flux cleaned = 1.70496e-05 Jy
! Component: 150  -  total flux cleaned = 2.58603e-05 Jy
! Component: 200  -  total flux cleaned = 2.98575e-05 Jy
! Total flux subtracted in 200 components = 2.98575e-05 Jy
! Clean residual min=-0.000798 max=0.000691 Jy/beam
! Clean residual mean=0.000001 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.0203422 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 139 components and 0.0203421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022211Jy  sigma=0.014122
! Fit after  self-cal, rms=0.022212Jy  sigma=0.014122
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.117 mas, bmaj=6.149 mas, bpa=-20.25 degrees
! Estimated noise=16.6172 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.117 x 6.149 at -20.25 degrees (North through East)
! Clean map  min=-0.00081867  max=0.018366 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.564 mas, bmaj=6.222 mas, bpa=-23.65 degrees
! Estimated noise=24.1545 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142747 Jy
! Component: 100  -  total flux cleaned = 0.0176696 Jy
! Component: 150  -  total flux cleaned = 0.0185533 Jy
! Component: 200  -  total flux cleaned = 0.0192219 Jy
! Total flux subtracted in 200 components = 0.0192219 Jy
! Clean residual min=-0.001462 max=0.001282 Jy/beam
! Clean residual mean=0.000001 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.0192219 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.0192219 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.117 mas, bmaj=6.149 mas, bpa=-20.25 degrees
! Estimated noise=16.6172 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000498455 Jy
! Component: 100  -  total flux cleaned = 0.000740563 Jy
! Component: 150  -  total flux cleaned = 0.000924305 Jy
! Component: 200  -  total flux cleaned = 0.00105566 Jy
! Total flux subtracted in 200 components = 0.00105566 Jy
! Clean residual min=-0.000911 max=0.000870 Jy/beam
! Clean residual mean=0.000001 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.0202776 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 64 components and 0.0202776 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.315 mas, bmaj=6.346 mas, bpa=-20.77 degrees
! Estimated noise=16.6853 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.83931e-05 Jy
! Component: 100  -  total flux cleaned = 0.000126103 Jy
! Component: 150  -  total flux cleaned = 0.00013488 Jy
! Component: 200  -  total flux cleaned = 0.000151035 Jy
! Total flux subtracted in 200 components = 0.000151035 Jy
! Clean residual min=-0.000846 max=0.000800 Jy/beam
! Clean residual mean=0.000001 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.0204286 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.88773e-07 Jy
! Component: 100  -  total flux cleaned = 7.48027e-06 Jy
! Component: 150  -  total flux cleaned = 7.4763e-06 Jy
! Component: 200  -  total flux cleaned = 1.41605e-05 Jy
! Total flux subtracted in 200 components = 1.41605e-05 Jy
! Clean residual min=-0.000844 max=0.000772 Jy/beam
! Clean residual mean=0.000001 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0204428 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 88 components and 0.0204428 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.117 mas, bmaj=6.149 mas, bpa=-20.25 degrees
! Estimated noise=16.6172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.58721e-07 Jy
! Component: 100  -  total flux cleaned = 1.21181e-05 Jy
! Component: 150  -  total flux cleaned = 1.83354e-05 Jy
! Component: 200  -  total flux cleaned = 1.8357e-05 Jy
! Total flux subtracted in 200 components = 1.8357e-05 Jy
! Clean residual min=-0.000857 max=0.000773 Jy/beam
! Clean residual mean=0.000001 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.0204611 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.0204611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022218Jy  sigma=0.014128
! Fit after  self-cal, rms=0.022212Jy  sigma=0.014126
wmodel /scr/pima/bp171a7_uvs/J0746-0220_X_map.mod
! Writing 98 model components to file: /scr/pima/bp171a7_uvs/J0746-0220_X_map.mod
wobs /scr/pima/bp171a7_uvs/J0746-0220_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J0746-0220_X_uvs.fits
wwins /scr/pima/bp171a7_uvs/J0746-0220_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bp171a7_uvs/J0746-0220_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000179441 Jy
! Component: 100  -  total flux cleaned = -0.000215415 Jy
! Component: 150  -  total flux cleaned = -0.000225566 Jy
! Component: 200  -  total flux cleaned = -0.000234293 Jy
! Component: 250  -  total flux cleaned = -0.000285415 Jy
! Component: 300  -  total flux cleaned = -0.000324341 Jy
! Component: 350  -  total flux cleaned = -0.000375602 Jy
! Component: 400  -  total flux cleaned = -0.000403412 Jy
! Component: 450  -  total flux cleaned = -0.000423068 Jy
! Component: 500  -  total flux cleaned = -0.000435343 Jy
! Component: 550  -  total flux cleaned = -0.000429262 Jy
! Component: 600  -  total flux cleaned = -0.000417794 Jy
! Component: 650  -  total flux cleaned = -0.000412386 Jy
! Component: 700  -  total flux cleaned = -0.000391342 Jy
! Component: 750  -  total flux cleaned = -0.000371069 Jy
! Component: 800  -  total flux cleaned = -0.000361408 Jy
! Component: 850  -  total flux cleaned = -0.000370828 Jy
! Component: 900  -  total flux cleaned = -0.000370855 Jy
! Component: 950  -  total flux cleaned = -0.000388837 Jy
! Component: 1000  -  total flux cleaned = -0.000414726 Jy
! Component: 1050  -  total flux cleaned = -0.000427238 Jy
! Component: 1100  -  total flux cleaned = -0.000447631 Jy
! Component: 1150  -  total flux cleaned = -0.000467398 Jy
! Component: 1200  -  total flux cleaned = -0.000482769 Jy
! Component: 1250  -  total flux cleaned = -0.000482771 Jy
! Component: 1300  -  total flux cleaned = -0.000479098 Jy
! Component: 1350  -  total flux cleaned = -0.000475598 Jy
! Component: 1400  -  total flux cleaned = -0.000482613 Jy
! Component: 1450  -  total flux cleaned = -0.000489422 Jy
! Component: 1500  -  total flux cleaned = -0.00047601 Jy
! Component: 1550  -  total flux cleaned = -0.000472714 Jy
! Component: 1600  -  total flux cleaned = -0.000463122 Jy
! Component: 1650  -  total flux cleaned = -0.000463196 Jy
! Component: 1700  -  total flux cleaned = -0.000457044 Jy
! Component: 1750  -  total flux cleaned = -0.00045402 Jy
! Component: 1800  -  total flux cleaned = -0.000445112 Jy
! Component: 1850  -  total flux cleaned = -0.000436373 Jy
! Component: 1900  -  total flux cleaned = -0.000427779 Jy
! Component: 1950  -  total flux cleaned = -0.00042212 Jy
! Component: 2000  -  total flux cleaned = -0.000408095 Jy
! Component: 2050  -  total flux cleaned = -0.000399721 Jy
! Component: 2100  -  total flux cleaned = -0.000388735 Jy
! Component: 2150  -  total flux cleaned = -0.000380581 Jy
! Component: 2200  -  total flux cleaned = -0.000369792 Jy
! Component: 2250  -  total flux cleaned = -0.000353698 Jy
! Component: 2300  -  total flux cleaned = -0.000345708 Jy
! Component: 2350  -  total flux cleaned = -0.000337757 Jy
! Component: 2400  -  total flux cleaned = -0.000329804 Jy
! Component: 2450  -  total flux cleaned = -0.000319246 Jy
! Component: 2500  -  total flux cleaned = -0.000306079 Jy
! Component: 2550  -  total flux cleaned = -0.000292934 Jy
! Component: 2600  -  total flux cleaned = -0.000285073 Jy
! Component: 2650  -  total flux cleaned = -0.000271947 Jy
! Component: 2700  -  total flux cleaned = -0.000258871 Jy
! Component: 2750  -  total flux cleaned = -0.000248398 Jy
! Component: 2800  -  total flux cleaned = -0.000230087 Jy
! Component: 2850  -  total flux cleaned = -0.000214349 Jy
! Component: 2900  -  total flux cleaned = -0.000198553 Jy
! Component: 2950  -  total flux cleaned = -0.000185398 Jy
! Component: 3000  -  total flux cleaned = -0.000174818 Jy
! Component: 3050  -  total flux cleaned = -0.000158872 Jy
! Component: 3100  -  total flux cleaned = -0.000148188 Jy
! Component: 3150  -  total flux cleaned = -0.000134761 Jy
! Component: 3200  -  total flux cleaned = -0.000124018 Jy
! Component: 3250  -  total flux cleaned = -0.00011319 Jy
! Component: 3300  -  total flux cleaned = -0.000102307 Jy
! Component: 3350  -  total flux cleaned = -9.13763e-05 Jy
! Component: 3400  -  total flux cleaned = -8.0394e-05 Jy
! Component: 3450  -  total flux cleaned = -7.48687e-05 Jy
! Component: 3500  -  total flux cleaned = -5.81983e-05 Jy
! Component: 3550  -  total flux cleaned = -4.70138e-05 Jy
! Component: 3600  -  total flux cleaned = -3.0119e-05 Jy
! Component: 3650  -  total flux cleaned = -2.16431e-05 Jy
! Component: 3700  -  total flux cleaned = -1.3095e-05 Jy
! Component: 3750  -  total flux cleaned = -1.62563e-06 Jy
! Component: 3800  -  total flux cleaned = 7.058e-06 Jy
! Component: 3850  -  total flux cleaned = 1.58009e-05 Jy
! Component: 3900  -  total flux cleaned = 2.16874e-05 Jy
! Component: 3950  -  total flux cleaned = 3.05472e-05 Jy
! Component: 4000  -  total flux cleaned = 3.65195e-05 Jy
! Component: 4050  -  total flux cleaned = 5.15671e-05 Jy
! Total flux subtracted in 4096 components = 5.46155e-05 Jy
! Clean residual min=-0.000184 max=0.000168 Jy/beam
! Clean residual mean=0.000001 rms=0.000058 Jy/beam
! Combined flux in latest and established models = 0.0205157 Jy
keep
! Adding 294 model components to the UV plane model.
! The established model now contains 392 components and 0.0205157 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J0746-0220_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.117 x 6.149 at -20.25 degrees (North through East)
! Clean map  min=-0.00089767  max=0.018241 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J0746-0220_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0182413 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 5.58362e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.918293 0.918293 1.83659 3.67317 7.34634 14.6927 29.3854 58.7708
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.018 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J0746-0220_X_uvs.log closed on Sun May 12 14:01:24 2013