! Started logfile: /scr/pima/bp171a7_uvs/J0746-0220_C_uvs.log on Sun May 12 14:50:30 2013
obs /scr/pima/bp171a7_uvs/J0746-0220_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a7_uvs/J0746-0220_C_uva.fits
! AN table 1: 45 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.735802 visibilities/baseline/integration-bin.
! Found source: J0746-0220
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 9536 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a7_uvs/J0746-0220_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002401Jy  sigma=0.708764
! Fit after  self-cal, rms=0.986460Jy  sigma=0.697493
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.435 mas, bmaj=4.84 mas, bpa=-12.52 degrees
! Estimated noise=16.2756 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107084 Jy
! Component: 100  -  total flux cleaned = 0.013899 Jy
! Total flux subtracted in 100 components = 0.013899 Jy
! Clean residual min=-0.001963 max=0.002231 Jy/beam
! Clean residual mean=-0.000002 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.013899 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.013899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027797Jy  sigma=0.019654
! Fit after  self-cal, rms=0.025610Jy  sigma=0.018107
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00428176 Jy
! Component: 100  -  total flux cleaned = 0.00612434 Jy
! Total flux subtracted in 100 components = 0.00612434 Jy
! Clean residual min=-0.001825 max=0.002075 Jy/beam
! Clean residual mean=-0.000004 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.0200233 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.0200233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024950Jy  sigma=0.017641
! Fit after  self-cal, rms=0.024935Jy  sigma=0.017630
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.937 mas, bmaj=5.901 mas, bpa=-11.87 degrees
! Estimated noise=10.241 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000823162 Jy
! Component: 100  -  total flux cleaned = 0.00108092 Jy
! Component: 150  -  total flux cleaned = 0.00111201 Jy
! Component: 200  -  total flux cleaned = 0.00111135 Jy
! Total flux subtracted in 200 components = 0.00111135 Jy
! Clean residual min=-0.001238 max=0.001436 Jy/beam
! Clean residual mean=-0.000003 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.0211346 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 19 components and 0.0211346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024904Jy  sigma=0.017608
! Fit after  self-cal, rms=0.024899Jy  sigma=0.017605
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        0.69     KP        0.92     LA        1.05     
!   MK        0.89     NL        0.97     OV        0.87     PT        0.76     
!   SC        0.44     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     HN        0.76     KP        0.87     LA        1.09     
!   MK        0.89     NL        1.05     OV        1.12     PT        0.87     
!   SC        0.62     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.15     HN        0.84     KP        0.98     LA        0.96     
!   MK        1.06     NL        1.06     OV        1.14     PT        0.99     
!   SC        1.11     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.16     HN        0.83     KP        1.07     LA        1.04     
!   MK        1.23     NL        0.99     OV        1.11     PT        1.00     
!   SC        1.40     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     HN        0.89     KP        0.98     LA        1.16     
!   MK        1.15     NL        1.06     OV        1.14     PT        0.93     
!   SC        1.27     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        0.88     KP        1.10     LA        1.17     
!   MK        1.06     NL        1.01     OV        1.18     PT        1.15     
!   SC        1.41     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     HN        0.81     KP        1.09     LA        1.14     
!   MK        1.23     NL        0.93     OV        1.06     PT        0.98     
!   SC        1.51     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.92     KP        1.17     LA        1.14     
!   MK        1.10     NL        0.85     OV        1.28     PT        0.95     
!   SC        1.57     
! 
! 
! Fit before self-cal, rms=0.024899Jy  sigma=0.017605
! Fit after  self-cal, rms=0.023541Jy  sigma=0.017258
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.934 mas, bmaj=5.917 mas, bpa=-11.97 degrees
! Estimated noise=10.1783 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000381714 Jy
! Component: 100  -  total flux cleaned = 0.000419654 Jy
! Component: 150  -  total flux cleaned = 0.00044124 Jy
! Component: 200  -  total flux cleaned = 0.000459914 Jy
! Total flux subtracted in 200 components = 0.000459914 Jy
! Clean residual min=-0.000773 max=0.000743 Jy/beam
! Clean residual mean=-0.000002 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.0215946 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 36 components and 0.0215946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023529Jy  sigma=0.017249
! Fit after  self-cal, rms=0.023668Jy  sigma=0.017178
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023668Jy  sigma=0.017178
! Fit after  self-cal, rms=0.024249Jy  sigma=0.017110
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.922 mas, bmaj=5.843 mas, bpa=-11.86 degrees
! Estimated noise=10.2992 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000355124 Jy
! Component: 100  -  total flux cleaned = 0.000383375 Jy
! Component: 150  -  total flux cleaned = 0.00040784 Jy
! Component: 200  -  total flux cleaned = 0.000421859 Jy
! Total flux subtracted in 200 components = 0.000421859 Jy
! Clean residual min=-0.000692 max=0.000766 Jy/beam
! Clean residual mean=-0.000003 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.0220164 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 41 components and 0.0220164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024242Jy  sigma=0.017105
! Fit after  self-cal, rms=0.024329Jy  sigma=0.017094
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.66935e-05 Jy
! Component: 100  -  total flux cleaned = -6.64073e-05 Jy
! Component: 150  -  total flux cleaned = -6.64038e-05 Jy
! Component: 200  -  total flux cleaned = -7.26218e-05 Jy
! Total flux subtracted in 200 components = -7.26218e-05 Jy
! Clean residual min=-0.000725 max=0.000774 Jy/beam
! Clean residual mean=-0.000002 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0219438 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 0.0219438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024325Jy  sigma=0.017091
! Fit after  self-cal, rms=0.024328Jy  sigma=0.017091
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024328Jy  sigma=0.017091
! Fit after  self-cal, rms=0.024691Jy  sigma=0.017076
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.912 mas, bmaj=5.826 mas, bpa=-11.9 degrees
! Estimated noise=10.2951 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012975 Jy
! Component: 100  -  total flux cleaned = 0.000135701 Jy
! Component: 150  -  total flux cleaned = 0.000151794 Jy
! Component: 200  -  total flux cleaned = 0.000161403 Jy
! Total flux subtracted in 200 components = 0.000161403 Jy
! Clean residual min=-0.000650 max=0.000717 Jy/beam
! Clean residual mean=-0.000002 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.0221052 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 47 components and 0.0221052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024688Jy  sigma=0.017074
! Fit after  self-cal, rms=0.024750Jy  sigma=0.017070
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.58499e-05 Jy
! Component: 100  -  total flux cleaned = -5.60163e-05 Jy
! Component: 150  -  total flux cleaned = -5.62709e-05 Jy
! Component: 200  -  total flux cleaned = -6.04167e-05 Jy
! Total flux subtracted in 200 components = -6.04167e-05 Jy
! Clean residual min=-0.000682 max=0.000714 Jy/beam
! Clean residual mean=-0.000002 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.0220448 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 49 components and 0.0220448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024748Jy  sigma=0.017069
! Fit after  self-cal, rms=0.024745Jy  sigma=0.017068
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024745Jy  sigma=0.017068
! Fit after  self-cal, rms=0.024865Jy  sigma=0.017066
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.345 mas, bmaj=9.419 mas, bpa=-12.37 degrees
! Estimated noise=12.1849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000165216 Jy
! Component: 100  -  total flux cleaned = 0.00017831 Jy
! Component: 150  -  total flux cleaned = 0.000189568 Jy
! Component: 200  -  total flux cleaned = 0.000202794 Jy
! Total flux subtracted in 200 components = 0.000202794 Jy
! Clean residual min=-0.000765 max=0.000799 Jy/beam
! Clean residual mean=-0.000004 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.0222476 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 57 components and 0.0222476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024864Jy  sigma=0.017065
! Fit after  self-cal, rms=0.024886Jy  sigma=0.017063
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.26067e-07 Jy
! Component: 100  -  total flux cleaned = 7.69353e-06 Jy
! Component: 150  -  total flux cleaned = 1.12723e-05 Jy
! Component: 200  -  total flux cleaned = 1.44102e-05 Jy
! Total flux subtracted in 200 components = 1.44102e-05 Jy
! Clean residual min=-0.000778 max=0.000808 Jy/beam
! Clean residual mean=-0.000004 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.022262 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 68 components and 0.022262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024885Jy  sigma=0.017062
! Fit after  self-cal, rms=0.024885Jy  sigma=0.017062
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.903 mas, bmaj=5.808 mas, bpa=-11.92 degrees
! Estimated noise=10.2724 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.903 x 5.808 at -11.92 degrees (North through East)
! Clean map  min=-0.00062747  max=0.016064 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.428 mas, bmaj=4.858 mas, bpa=-12.73 degrees
! Estimated noise=16.0788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132268 Jy
! Component: 100  -  total flux cleaned = 0.0175312 Jy
! Component: 150  -  total flux cleaned = 0.0198109 Jy
! Component: 200  -  total flux cleaned = 0.0210494 Jy
! Total flux subtracted in 200 components = 0.0210494 Jy
! Clean residual min=-0.001226 max=0.001055 Jy/beam
! Clean residual mean=-0.000002 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.0210494 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0210494 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.903 mas, bmaj=5.808 mas, bpa=-11.92 degrees
! Estimated noise=10.2724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108575 Jy
! Component: 100  -  total flux cleaned = 0.0012353 Jy
! Component: 150  -  total flux cleaned = 0.0012006 Jy
! Component: 200  -  total flux cleaned = 0.00119809 Jy
! Total flux subtracted in 200 components = 0.00119809 Jy
! Clean residual min=-0.000729 max=0.000607 Jy/beam
! Clean residual mean=-0.000002 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.0222475 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 42 components and 0.0222475 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.345 mas, bmaj=9.419 mas, bpa=-12.37 degrees
! Estimated noise=12.1849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125499 Jy
! Component: 100  -  total flux cleaned = 0.000234858 Jy
! Component: 150  -  total flux cleaned = 0.000250397 Jy
! Component: 200  -  total flux cleaned = 0.000263654 Jy
! Total flux subtracted in 200 components = 0.000263654 Jy
! Clean residual min=-0.000801 max=0.000667 Jy/beam
! Clean residual mean=-0.000004 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0225111 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.85496e-06 Jy
! Component: 100  -  total flux cleaned = 1.5724e-05 Jy
! Component: 150  -  total flux cleaned = 1.57299e-05 Jy
! Component: 200  -  total flux cleaned = 1.58312e-05 Jy
! Total flux subtracted in 200 components = 1.58312e-05 Jy
! Clean residual min=-0.000795 max=0.000649 Jy/beam
! Clean residual mean=-0.000004 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.022527 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 74 components and 0.022527 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.903 mas, bmaj=5.808 mas, bpa=-11.92 degrees
! Estimated noise=10.2724 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.46727e-05 Jy
! Component: 100  -  total flux cleaned = -6.94934e-05 Jy
! Component: 150  -  total flux cleaned = -6.98063e-05 Jy
! Component: 200  -  total flux cleaned = -5.05377e-05 Jy
! Total flux subtracted in 200 components = -5.05377e-05 Jy
! Clean residual min=-0.000726 max=0.000532 Jy/beam
! Clean residual mean=-0.000002 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.0224764 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 91 components and 0.0224764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024870Jy  sigma=0.017056
! Fit after  self-cal, rms=0.024865Jy  sigma=0.017049
wmodel /scr/pima/bp171a7_uvs/J0746-0220_C_map.mod
! Writing 91 model components to file: /scr/pima/bp171a7_uvs/J0746-0220_C_map.mod
wobs /scr/pima/bp171a7_uvs/J0746-0220_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a7_uvs/J0746-0220_C_uvs.fits
wwins /scr/pima/bp171a7_uvs/J0746-0220_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a7_uvs/J0746-0220_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113615 Jy
! Component: 100  -  total flux cleaned = -9.23201e-05 Jy
! Component: 150  -  total flux cleaned = -0.000102494 Jy
! Component: 200  -  total flux cleaned = -0.000131288 Jy
! Component: 250  -  total flux cleaned = -0.000122253 Jy
! Component: 300  -  total flux cleaned = -0.000113618 Jy
! Component: 350  -  total flux cleaned = -8.8447e-05 Jy
! Component: 400  -  total flux cleaned = -8.02176e-05 Jy
! Component: 450  -  total flux cleaned = -7.22566e-05 Jy
! Component: 500  -  total flux cleaned = -8.77861e-05 Jy
! Component: 550  -  total flux cleaned = -0.000103069 Jy
! Component: 600  -  total flux cleaned = -0.000110555 Jy
! Component: 650  -  total flux cleaned = -0.000132196 Jy
! Component: 700  -  total flux cleaned = -0.000146225 Jy
! Component: 750  -  total flux cleaned = -0.000139346 Jy
! Component: 800  -  total flux cleaned = -0.000152939 Jy
! Component: 850  -  total flux cleaned = -0.000152916 Jy
! Component: 900  -  total flux cleaned = -0.000159517 Jy
! Component: 950  -  total flux cleaned = -0.000178768 Jy
! Component: 1000  -  total flux cleaned = -0.000178585 Jy
! Component: 1050  -  total flux cleaned = -0.000184797 Jy
! Component: 1100  -  total flux cleaned = -0.000190956 Jy
! Component: 1150  -  total flux cleaned = -0.000184976 Jy
! Component: 1200  -  total flux cleaned = -0.000190869 Jy
! Component: 1250  -  total flux cleaned = -0.000173636 Jy
! Component: 1300  -  total flux cleaned = -0.000168029 Jy
! Component: 1350  -  total flux cleaned = -0.000173639 Jy
! Component: 1400  -  total flux cleaned = -0.000168007 Jy
! Component: 1450  -  total flux cleaned = -0.000146115 Jy
! Component: 1500  -  total flux cleaned = -0.000135383 Jy
! Component: 1550  -  total flux cleaned = -0.000114223 Jy
! Component: 1600  -  total flux cleaned = -0.000103789 Jy
! Component: 1650  -  total flux cleaned = -9.3452e-05 Jy
! Component: 1700  -  total flux cleaned = -8.32173e-05 Jy
! Component: 1750  -  total flux cleaned = -7.32304e-05 Jy
! Component: 1800  -  total flux cleaned = -7.83083e-05 Jy
! Component: 1850  -  total flux cleaned = -6.36755e-05 Jy
! Component: 1900  -  total flux cleaned = -6.36764e-05 Jy
! Component: 1950  -  total flux cleaned = -3.97468e-05 Jy
! Component: 2000  -  total flux cleaned = -4.9254e-05 Jy
! Component: 2050  -  total flux cleaned = -5.40337e-05 Jy
! Component: 2100  -  total flux cleaned = -5.40254e-05 Jy
! Component: 2150  -  total flux cleaned = -5.399e-05 Jy
! Component: 2200  -  total flux cleaned = -5.39679e-05 Jy
! Component: 2250  -  total flux cleaned = -5.3966e-05 Jy
! Component: 2300  -  total flux cleaned = -5.39219e-05 Jy
! Component: 2350  -  total flux cleaned = -5.83229e-05 Jy
! Component: 2400  -  total flux cleaned = -6.69882e-05 Jy
! Component: 2450  -  total flux cleaned = -7.11956e-05 Jy
! Component: 2500  -  total flux cleaned = -5.84204e-05 Jy
! Component: 2550  -  total flux cleaned = -6.26348e-05 Jy
! Component: 2600  -  total flux cleaned = -5.84905e-05 Jy
! Component: 2650  -  total flux cleaned = -5.43332e-05 Jy
! Component: 2700  -  total flux cleaned = -4.21172e-05 Jy
! Component: 2750  -  total flux cleaned = -3.80602e-05 Jy
! Component: 2800  -  total flux cleaned = -3.80682e-05 Jy
! Component: 2850  -  total flux cleaned = -3.81042e-05 Jy
! Component: 2900  -  total flux cleaned = -4.60217e-05 Jy
! Component: 2950  -  total flux cleaned = -5.37891e-05 Jy
! Component: 3000  -  total flux cleaned = -3.04503e-05 Jy
! Component: 3050  -  total flux cleaned = -2.27306e-05 Jy
! Component: 3100  -  total flux cleaned = -7.40724e-06 Jy
! Component: 3150  -  total flux cleaned = -7.40531e-06 Jy
! Component: 3200  -  total flux cleaned = 1.17122e-07 Jy
! Component: 3250  -  total flux cleaned = 1.87655e-05 Jy
! Component: 3300  -  total flux cleaned = 2.24227e-05 Jy
! Component: 3350  -  total flux cleaned = 3.71218e-05 Jy
! Component: 3400  -  total flux cleaned = 4.44204e-05 Jy
! Component: 3450  -  total flux cleaned = 4.80485e-05 Jy
! Component: 3500  -  total flux cleaned = 4.8051e-05 Jy
! Component: 3550  -  total flux cleaned = 7.29882e-05 Jy
! Component: 3600  -  total flux cleaned = 6.94221e-05 Jy
! Component: 3650  -  total flux cleaned = 7.29511e-05 Jy
! Component: 3700  -  total flux cleaned = 7.64159e-05 Jy
! Component: 3750  -  total flux cleaned = 7.29723e-05 Jy
! Component: 3800  -  total flux cleaned = 8.32907e-05 Jy
! Component: 3850  -  total flux cleaned = 7.64469e-05 Jy
! Component: 3900  -  total flux cleaned = 8.3225e-05 Jy
! Component: 3950  -  total flux cleaned = 8.31989e-05 Jy
! Component: 4000  -  total flux cleaned = 8.6543e-05 Jy
! Component: 4050  -  total flux cleaned = 8.65217e-05 Jy
! Total flux subtracted in 4096 components = 8.31889e-05 Jy
! Clean residual min=-0.000191 max=0.000232 Jy/beam
! Clean residual mean=-0.000001 rms=0.000064 Jy/beam
! Combined flux in latest and established models = 0.0225596 Jy
keep
! Adding 274 model components to the UV plane model.
! The established model now contains 365 components and 0.0225596 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a7_uvs/J0746-0220_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.903 x 5.808 at -11.92 degrees (North through East)
! Clean map  min=-0.00058721  max=0.015902 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a7_uvs/J0746-0220_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0159023 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 6.25419e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.17986 1.17986 2.35972 4.71945 9.4389 18.8778 37.7556 75.5112
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.015 
quit
! Quitting program
! Log file /scr/pima/bp171a7_uvs/J0746-0220_C_uvs.log closed on Sun May 12 14:50:35 2013