! Started logfile: /d2/scr/pima/bp171a6_uvs/J0923+5136_C_uvs.log on Wed Jan 15 19:53:49 2014
obs /d2/scr/pima/bp171a6_uvs/J0923+5136_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171a6_uvs/J0923+5136_C_uva.fits
! AN table 1: 7 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.575397 visibilities/baseline/integration-bin.
! Found source: J0923+5136
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1160 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171a6_uvs/J0923+5136_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006879Jy  sigma=4.354087
! Fit after  self-cal, rms=0.904593Jy  sigma=3.879296
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.212 mas, bmaj=5.037 mas, bpa=0.8635 degrees
! Estimated noise=7.15917 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0739881 Jy
! Component: 100  -  total flux cleaned = 0.0909717 Jy
! Total flux subtracted in 100 components = 0.0909717 Jy
! Clean residual min=-0.003220 max=0.006406 Jy/beam
! Clean residual mean=0.000005 rms=0.001033 Jy/beam
! Combined flux in latest and established models = 0.0909716 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0909716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023475Jy  sigma=0.097342
! Fit after  self-cal, rms=0.023453Jy  sigma=0.097291
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00700841 Jy
! Component: 100  -  total flux cleaned = 0.0105885 Jy
! Total flux subtracted in 100 components = 0.0105885 Jy
! Clean residual min=-0.002558 max=0.002744 Jy/beam
! Clean residual mean=0.000003 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.10156 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.10156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021434Jy  sigma=0.083445
! Fit after  self-cal, rms=0.021419Jy  sigma=0.083413
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.395 mas, bmaj=5.117 mas, bpa=1.038 degrees
! Estimated noise=5.07463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00279576 Jy
! Component: 100  -  total flux cleaned = 0.00409429 Jy
! Component: 150  -  total flux cleaned = 0.00444929 Jy
! Component: 200  -  total flux cleaned = 0.00477784 Jy
! Total flux subtracted in 200 components = 0.00477784 Jy
! Clean residual min=-0.002988 max=0.003377 Jy/beam
! Clean residual mean=-0.000000 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.106338 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 19 components and 0.106338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021274Jy  sigma=0.081017
! Fit after  self-cal, rms=0.021270Jy  sigma=0.081009
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.395 x 5.117 at 1.038 degrees (North through East)
! Clean map  min=-0.0029706  max=0.097183 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.97     KP        0.89     LA        1.02     
!   MK        1.06     NL        1.05     OV        0.95     PT        0.89     
!   SC        0.93     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     HN        0.96     KP        0.96     LA        1.05     
!   MK        1.04     NL        1.13     OV        0.99     PT        0.98     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        0.96     KP        1.00     LA        1.06     
!   MK        1.07     NL        1.04     OV        0.96     PT        1.02     
!   SC        0.97     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.03     KP        0.98     LA        1.08     
!   MK        1.09     NL        1.06     OV        0.97     PT        0.92     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.05     KP        1.00     LA        1.20     
!   MK        1.02     NL        1.01     OV        0.97     PT        1.06     
!   SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     HN        0.97     KP        0.95     LA        1.06     
!   MK        1.03     NL        1.07     OV        0.97     PT        0.97     
!   SC        0.95     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.03     KP        1.06     LA        1.02     
!   MK        1.00     NL        1.02     OV        1.03     PT        0.96     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.021270Jy  sigma=0.081009
! Fit after  self-cal, rms=0.020548Jy  sigma=0.075911
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.456 mas, bmaj=5.226 mas, bpa=0.8932 degrees
! Estimated noise=5.1864 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101867 Jy
! Component: 100  -  total flux cleaned = 0.00127891 Jy
! Component: 150  -  total flux cleaned = 0.00148576 Jy
! Component: 200  -  total flux cleaned = 0.00162716 Jy
! Total flux subtracted in 200 components = 0.00162716 Jy
! Clean residual min=-0.002353 max=0.002867 Jy/beam
! Clean residual mean=0.000000 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.107965 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 35 components and 0.107965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020544Jy  sigma=0.075390
! Fit after  self-cal, rms=0.020543Jy  sigma=0.075379
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020543Jy  sigma=0.075379
! Fit after  self-cal, rms=0.020514Jy  sigma=0.075243
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.453 mas, bmaj=5.226 mas, bpa=0.9533 degrees
! Estimated noise=5.22681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000878825 Jy
! Component: 100  -  total flux cleaned = 0.00110564 Jy
! Component: 150  -  total flux cleaned = 0.0012269 Jy
! Component: 200  -  total flux cleaned = 0.00127081 Jy
! Total flux subtracted in 200 components = 0.00127081 Jy
! Clean residual min=-0.002387 max=0.002847 Jy/beam
! Clean residual mean=0.000000 rms=0.000665 Jy/beam
! Combined flux in latest and established models = 0.109236 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 42 components and 0.109236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020539Jy  sigma=0.074831
! Fit after  self-cal, rms=0.020538Jy  sigma=0.074829
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.4, 0.3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025079 Jy
! Component: 100  -  total flux cleaned = 0.00348873 Jy
! Component: 150  -  total flux cleaned = 0.00381624 Jy
! Component: 200  -  total flux cleaned = 0.00390353 Jy
! Total flux subtracted in 200 components = 0.00390353 Jy
! Clean residual min=-0.002218 max=0.002293 Jy/beam
! Clean residual mean=0.000000 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.113139 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 73 components and 0.113139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020172Jy  sigma=0.073340
! Fit after  self-cal, rms=0.020128Jy  sigma=0.073229
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020128Jy  sigma=0.073229
! Fit after  self-cal, rms=0.020102Jy  sigma=0.073075
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.449 mas, bmaj=5.218 mas, bpa=0.9726 degrees
! Estimated noise=5.25563 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108948 Jy
! Component: 100  -  total flux cleaned = 0.00185589 Jy
! Component: 150  -  total flux cleaned = 0.00233288 Jy
! Component: 200  -  total flux cleaned = 0.00241478 Jy
! Total flux subtracted in 200 components = 0.00241478 Jy
! Clean residual min=-0.002123 max=0.002141 Jy/beam
! Clean residual mean=0.000000 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.115554 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 98 components and 0.115554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020058Jy  sigma=0.072539
! Fit after  self-cal, rms=0.020046Jy  sigma=0.072507
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000429168 Jy
! Component: 100  -  total flux cleaned = 0.000499404 Jy
! Component: 150  -  total flux cleaned = 0.000547104 Jy
! Component: 200  -  total flux cleaned = 0.000577 Jy
! Total flux subtracted in 200 components = 0.000577 Jy
! Clean residual min=-0.002111 max=0.002120 Jy/beam
! Clean residual mean=-0.000000 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.116131 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 112 components and 0.116131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020021Jy  sigma=0.072360
! Fit after  self-cal, rms=0.020017Jy  sigma=0.072352
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020017Jy  sigma=0.072352
! Fit after  self-cal, rms=0.019996Jy  sigma=0.072237
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.333 mas, bmaj=6.298 mas, bpa=-6.044 degrees
! Estimated noise=6.75424 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015973 Jy
! Component: 100  -  total flux cleaned = 0.00213299 Jy
! Component: 150  -  total flux cleaned = 0.00211425 Jy
! Component: 200  -  total flux cleaned = 0.00207994 Jy
! Total flux subtracted in 200 components = 0.00207994 Jy
! Clean residual min=-0.003415 max=0.002779 Jy/beam
! Clean residual mean=-0.000001 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 0.118211 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 120 components and 0.118211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020014Jy  sigma=0.071959
! Fit after  self-cal, rms=0.020001Jy  sigma=0.071886
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000368841 Jy
! Component: 100  -  total flux cleaned = 0.000388236 Jy
! Component: 150  -  total flux cleaned = 0.000346281 Jy
! Component: 200  -  total flux cleaned = 0.000297618 Jy
! Total flux subtracted in 200 components = 0.000297618 Jy
! Clean residual min=-0.003415 max=0.002795 Jy/beam
! Clean residual mean=-0.000001 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 0.118509 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 132 components and 0.118509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020007Jy  sigma=0.071884
! Fit after  self-cal, rms=0.020005Jy  sigma=0.071874
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.447 mas, bmaj=5.216 mas, bpa=0.987 degrees
! Estimated noise=5.29062 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.447 x 5.216 at 0.987 degrees (North through East)
! Clean map  min=-0.0020198  max=0.10007 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.226 mas, bmaj=5 mas, bpa=1.358 degrees
! Estimated noise=7.39258 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0761345 Jy
! Component: 100  -  total flux cleaned = 0.0938427 Jy
! Component: 150  -  total flux cleaned = 0.101232 Jy
! Component: 200  -  total flux cleaned = 0.105056 Jy
! Total flux subtracted in 200 components = 0.105056 Jy
! Clean residual min=-0.002368 max=0.002415 Jy/beam
! Clean residual mean=0.000003 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.105056 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.105056 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.447 mas, bmaj=5.216 mas, bpa=0.987 degrees
! Estimated noise=5.29062 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00377751 Jy
! Component: 100  -  total flux cleaned = 0.00639851 Jy
! Component: 150  -  total flux cleaned = 0.00830315 Jy
! Component: 200  -  total flux cleaned = 0.00973726 Jy
! Total flux subtracted in 200 components = 0.00973726 Jy
! Clean residual min=-0.002376 max=0.002014 Jy/beam
! Clean residual mean=0.000000 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.114793 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 51 components and 0.114793 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.333 mas, bmaj=6.298 mas, bpa=-6.044 degrees
! Estimated noise=6.75424 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00230825 Jy
! Component: 100  -  total flux cleaned = 0.00321621 Jy
! Component: 150  -  total flux cleaned = 0.00347718 Jy
! Component: 200  -  total flux cleaned = 0.00361735 Jy
! Total flux subtracted in 200 components = 0.00361735 Jy
! Clean residual min=-0.003541 max=0.002821 Jy/beam
! Clean residual mean=-0.000001 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.118411 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.94909e-05 Jy
! Component: 100  -  total flux cleaned = 5.68664e-05 Jy
! Component: 150  -  total flux cleaned = 5.70882e-05 Jy
! Component: 200  -  total flux cleaned = 4.15702e-05 Jy
! Total flux subtracted in 200 components = 4.15702e-05 Jy
! Clean residual min=-0.003465 max=0.002746 Jy/beam
! Clean residual mean=-0.000001 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 0.118452 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 87 components and 0.118452 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.447 mas, bmaj=5.216 mas, bpa=0.987 degrees
! Estimated noise=5.29062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000379283 Jy
! Component: 100  -  total flux cleaned = -0.000354374 Jy
! Component: 150  -  total flux cleaned = -0.000356724 Jy
! Component: 200  -  total flux cleaned = -0.000392944 Jy
! Total flux subtracted in 200 components = -0.000392944 Jy
! Clean residual min=-0.002103 max=0.002085 Jy/beam
! Clean residual mean=-0.000000 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.118059 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 104 components and 0.118059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020040Jy  sigma=0.071901
! Fit after  self-cal, rms=0.020036Jy  sigma=0.071874
wmodel /d2/scr/pima/bp171a6_uvs/J0923+5136_C_map.mod
! Writing 104 model components to file: /d2/scr/pima/bp171a6_uvs/J0923+5136_C_map.mod
wobs /d2/scr/pima/bp171a6_uvs/J0923+5136_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171a6_uvs/J0923+5136_C_uvs.fits
wwins /d2/scr/pima/bp171a6_uvs/J0923+5136_C_map.win
! wwins: Wrote 2 windows to /d2/scr/pima/bp171a6_uvs/J0923+5136_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.13972e-05 Jy
! Component: 100  -  total flux cleaned = 0.000113508 Jy
! Component: 150  -  total flux cleaned = 0.000280472 Jy
! Component: 200  -  total flux cleaned = 0.000437436 Jy
! Component: 250  -  total flux cleaned = 0.000526166 Jy
! Component: 300  -  total flux cleaned = 0.000694932 Jy
! Component: 350  -  total flux cleaned = 0.00080201 Jy
! Component: 400  -  total flux cleaned = 0.000905233 Jy
! Component: 450  -  total flux cleaned = 0.00102973 Jy
! Component: 500  -  total flux cleaned = 0.00112541 Jy
! Component: 550  -  total flux cleaned = 0.00126466 Jy
! Component: 600  -  total flux cleaned = 0.00139945 Jy
! Component: 650  -  total flux cleaned = 0.00153006 Jy
! Component: 700  -  total flux cleaned = 0.00163569 Jy
! Component: 750  -  total flux cleaned = 0.00171881 Jy
! Component: 800  -  total flux cleaned = 0.00181981 Jy
! Component: 850  -  total flux cleaned = 0.00185971 Jy
! Component: 900  -  total flux cleaned = 0.00193709 Jy
! Component: 950  -  total flux cleaned = 0.00199367 Jy
! Component: 1000  -  total flux cleaned = 0.00204881 Jy
! Component: 1050  -  total flux cleaned = 0.00208465 Jy
! Component: 1100  -  total flux cleaned = 0.00210232 Jy
! Component: 1150  -  total flux cleaned = 0.00211965 Jy
! Component: 1200  -  total flux cleaned = 0.00210256 Jy
! Component: 1250  -  total flux cleaned = 0.00211941 Jy
! Component: 1300  -  total flux cleaned = 0.0021522 Jy
! Component: 1350  -  total flux cleaned = 0.0021521 Jy
! Component: 1400  -  total flux cleaned = 0.00213651 Jy
! Component: 1450  -  total flux cleaned = 0.0021519 Jy
! Component: 1500  -  total flux cleaned = 0.00215209 Jy
! Component: 1550  -  total flux cleaned = 0.00221174 Jy
! Component: 1600  -  total flux cleaned = 0.0021822 Jy
! Component: 1650  -  total flux cleaned = 0.00219695 Jy
! Component: 1700  -  total flux cleaned = 0.00225405 Jy
! Component: 1750  -  total flux cleaned = 0.00226778 Jy
! Component: 1800  -  total flux cleaned = 0.00226738 Jy
! Component: 1850  -  total flux cleaned = 0.0022537 Jy
! Component: 1900  -  total flux cleaned = 0.00230741 Jy
! Component: 1950  -  total flux cleaned = 0.00228058 Jy
! Component: 2000  -  total flux cleaned = 0.00229368 Jy
! Component: 2050  -  total flux cleaned = 0.00230652 Jy
! Component: 2100  -  total flux cleaned = 0.00231917 Jy
! Component: 2150  -  total flux cleaned = 0.00233169 Jy
! Component: 2200  -  total flux cleaned = 0.00230696 Jy
! Component: 2250  -  total flux cleaned = 0.0023315 Jy
! Component: 2300  -  total flux cleaned = 0.00227105 Jy
! Component: 2350  -  total flux cleaned = 0.00230699 Jy
! Component: 2400  -  total flux cleaned = 0.00233044 Jy
! Component: 2450  -  total flux cleaned = 0.00230725 Jy
! Component: 2500  -  total flux cleaned = 0.00231875 Jy
! Component: 2550  -  total flux cleaned = 0.00229619 Jy
! Component: 2600  -  total flux cleaned = 0.00231857 Jy
! Component: 2650  -  total flux cleaned = 0.00231845 Jy
! Component: 2700  -  total flux cleaned = 0.00229663 Jy
! Component: 2750  -  total flux cleaned = 0.00233997 Jy
! Component: 2800  -  total flux cleaned = 0.00232908 Jy
! Component: 2850  -  total flux cleaned = 0.00231856 Jy
! Component: 2900  -  total flux cleaned = 0.00232901 Jy
! Component: 2950  -  total flux cleaned = 0.00229796 Jy
! Component: 3000  -  total flux cleaned = 0.0023183 Jy
! Component: 3050  -  total flux cleaned = 0.00232835 Jy
! Component: 3100  -  total flux cleaned = 0.00228804 Jy
! Component: 3150  -  total flux cleaned = 0.00229811 Jy
! Component: 3200  -  total flux cleaned = 0.00228828 Jy
! Component: 3250  -  total flux cleaned = 0.00227857 Jy
! Component: 3300  -  total flux cleaned = 0.00225919 Jy
! Component: 3350  -  total flux cleaned = 0.00224962 Jy
! Component: 3400  -  total flux cleaned = 0.00224023 Jy
! Component: 3450  -  total flux cleaned = 0.00223084 Jy
! Component: 3500  -  total flux cleaned = 0.00221225 Jy
! Component: 3550  -  total flux cleaned = 0.00222155 Jy
! Component: 3600  -  total flux cleaned = 0.00222156 Jy
! Component: 3650  -  total flux cleaned = 0.00220338 Jy
! Component: 3700  -  total flux cleaned = 0.00219439 Jy
! Component: 3750  -  total flux cleaned = 0.00219446 Jy
! Component: 3800  -  total flux cleaned = 0.00218561 Jy
! Component: 3850  -  total flux cleaned = 0.00215929 Jy
! Component: 3900  -  total flux cleaned = 0.00215056 Jy
! Component: 3950  -  total flux cleaned = 0.00214192 Jy
! Component: 4000  -  total flux cleaned = 0.00214193 Jy
! Component: 4050  -  total flux cleaned = 0.00212498 Jy
! Total flux subtracted in 4096 components = 0.0021081 Jy
! Clean residual min=-0.000530 max=0.000461 Jy/beam
! Clean residual mean=0.000000 rms=0.000151 Jy/beam
! Combined flux in latest and established models = 0.120167 Jy
keep
! Adding 381 model components to the UV plane model.
! The established model now contains 485 components and 0.120167 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp171a6_uvs/J0923+5136_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.447 x 5.216 at 0.987 degrees (North through East)
! Clean map  min=-0.0011464  max=0.099844 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171a6_uvs/J0923+5136_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0998437 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000146548 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.440334 0.440334 0.880667 1.76133 3.52267 7.04534 14.0907 28.1813 56.3627
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.099 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  681.301 
quit
! Quitting program
! Log file /d2/scr/pima/bp171a6_uvs/J0923+5136_C_uvs.log closed on Wed Jan 15 19:53:55 2014