! Started logfile: /d2/scr/pima/bp171a6_uvs/J0853+1352_C_uvs.log on Wed Jan 15 19:53:07 2014
obs /d2/scr/pima/bp171a6_uvs/J0853+1352_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171a6_uvs/J0853+1352_C_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.905423 visibilities/baseline/integration-bin.
! Found source: J0853+1352
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 10952 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171a6_uvs/J0853+1352_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001099Jy  sigma=1.959177
! Fit after  self-cal, rms=0.958552Jy  sigma=1.865335
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.261 mas, bmaj=3.798 mas, bpa=-0.856 degrees
! Estimated noise=7.28312 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0325076 Jy
! Component: 100  -  total flux cleaned = 0.0405162 Jy
! Total flux subtracted in 100 components = 0.0405162 Jy
! Clean residual min=-0.001831 max=0.005432 Jy/beam
! Clean residual mean=-0.000003 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.0405162 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0405162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020009Jy  sigma=0.038864
! Fit after  self-cal, rms=0.018403Jy  sigma=0.036529
! Inverting map 
! Added new window around map position (-3.9, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00507465 Jy
! Component: 100  -  total flux cleaned = 0.00800247 Jy
! Total flux subtracted in 100 components = 0.00800247 Jy
! Clean residual min=-0.001565 max=0.002125 Jy/beam
! Clean residual mean=-0.000001 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.0485187 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.0485187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016874Jy  sigma=0.031291
! Fit after  self-cal, rms=0.016689Jy  sigma=0.031044
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228525 Jy
! Component: 100  -  total flux cleaned = 0.00373338 Jy
! Total flux subtracted in 100 components = 0.00373338 Jy
! Clean residual min=-0.001189 max=0.001341 Jy/beam
! Clean residual mean=-0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0522521 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 23 components and 0.0522521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016327Jy  sigma=0.029513
! Fit after  self-cal, rms=0.016275Jy  sigma=0.029454
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.612 mas, bmaj=4.525 mas, bpa=-1.305 degrees
! Estimated noise=3.68813 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215768 Jy
! Component: 100  -  total flux cleaned = 0.00328588 Jy
! Component: 150  -  total flux cleaned = 0.00396426 Jy
! Component: 200  -  total flux cleaned = 0.00441194 Jy
! Total flux subtracted in 200 components = 0.00441194 Jy
! Clean residual min=-0.001445 max=0.001248 Jy/beam
! Clean residual mean=-0.000001 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.056664 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 44 components and 0.056664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016188Jy  sigma=0.028481
! Fit after  self-cal, rms=0.016143Jy  sigma=0.028417
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.612 x 4.525 at -1.305 degrees (North through East)
! Clean map  min=-0.001335  max=0.042903 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        0.92     KP        0.89     LA        1.01     
!   MK        1.05     NL        0.98     OV        0.93     PT        0.89     
!   SC        0.91     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        0.95     KP        0.92     LA        1.07     
!   MK        1.05     NL        1.08     OV        0.99     PT        0.97     
!   SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     HN        0.98     KP        0.99     LA        1.12     
!   MK        1.07     NL        1.01     OV        0.97     PT        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.95     KP        1.02     LA        1.09     
!   MK        1.09     NL        0.99     OV        0.96     PT        0.92     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.00     KP        1.00     LA        1.14     
!   MK        1.05     NL        0.96     OV        0.97     PT        1.04     
!   SC        1.04     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        0.93     KP        0.94     LA        1.05     
!   MK        0.99     NL        0.98     OV        0.96     PT        0.95     
!   SC        0.95     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     HN        0.96     KP        1.04     LA        1.04     
!   MK        1.03     NL        0.93     OV        0.99     PT        0.94     
!   SC        1.04     
! 
! 
! Fit before self-cal, rms=0.016143Jy  sigma=0.028417
! Fit after  self-cal, rms=0.015688Jy  sigma=0.027419
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.628 mas, bmaj=4.526 mas, bpa=-1.133 degrees
! Estimated noise=3.65128 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000353148 Jy
! Component: 100  -  total flux cleaned = 0.000430567 Jy
! Component: 150  -  total flux cleaned = 0.000506488 Jy
! Component: 200  -  total flux cleaned = 0.000567639 Jy
! Total flux subtracted in 200 components = 0.000567639 Jy
! Clean residual min=-0.000966 max=0.000784 Jy/beam
! Clean residual mean=-0.000001 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.0572317 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 59 components and 0.0572317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015584Jy  sigma=0.027394
! Fit after  self-cal, rms=0.015575Jy  sigma=0.027373
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015575Jy  sigma=0.027373
! Fit after  self-cal, rms=0.015512Jy  sigma=0.027267
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.625 mas, bmaj=4.514 mas, bpa=-1.14 degrees
! Estimated noise=3.62957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.84741e-05 Jy
! Component: 100  -  total flux cleaned = 0.000183034 Jy
! Component: 150  -  total flux cleaned = 0.000266777 Jy
! Component: 200  -  total flux cleaned = 0.000328109 Jy
! Total flux subtracted in 200 components = 0.000328109 Jy
! Clean residual min=-0.000919 max=0.000739 Jy/beam
! Clean residual mean=-0.000001 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.0575598 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 63 components and 0.0575598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015447Jy  sigma=0.027276
! Fit after  self-cal, rms=0.015441Jy  sigma=0.027270
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000112941 Jy
! Component: 100  -  total flux cleaned = 0.000130288 Jy
! Component: 150  -  total flux cleaned = 0.000130575 Jy
! Component: 200  -  total flux cleaned = 0.000137208 Jy
! Total flux subtracted in 200 components = 0.000137208 Jy
! Clean residual min=-0.000875 max=0.000732 Jy/beam
! Clean residual mean=-0.000001 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.057697 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 68 components and 0.057697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015424Jy  sigma=0.027264
! Fit after  self-cal, rms=0.015422Jy  sigma=0.027262
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015422Jy  sigma=0.027262
! Fit after  self-cal, rms=0.015392Jy  sigma=0.027231
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.622 mas, bmaj=4.5 mas, bpa=-1.116 degrees
! Estimated noise=3.60722 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.52062e-05 Jy
! Component: 100  -  total flux cleaned = 4.43263e-05 Jy
! Component: 150  -  total flux cleaned = 0.000109825 Jy
! Component: 200  -  total flux cleaned = 0.000165807 Jy
! Total flux subtracted in 200 components = 0.000165807 Jy
! Clean residual min=-0.000875 max=0.000708 Jy/beam
! Clean residual mean=-0.000001 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.0578628 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 70 components and 0.0578628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015348Jy  sigma=0.027255
! Fit after  self-cal, rms=0.015346Jy  sigma=0.027253
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.29965e-05 Jy
! Component: 100  -  total flux cleaned = 9.12162e-05 Jy
! Component: 150  -  total flux cleaned = 0.000102376 Jy
! Component: 200  -  total flux cleaned = 0.000118308 Jy
! Total flux subtracted in 200 components = 0.000118308 Jy
! Clean residual min=-0.000849 max=0.000704 Jy/beam
! Clean residual mean=-0.000001 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.0579811 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 72 components and 0.0579811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015335Jy  sigma=0.027252
! Fit after  self-cal, rms=0.015334Jy  sigma=0.027251
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015334Jy  sigma=0.027251
! Fit after  self-cal, rms=0.015315Jy  sigma=0.027243
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.606 mas, bmaj=7.113 mas, bpa=-7.762 degrees
! Estimated noise=4.39989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000295186 Jy
! Component: 100  -  total flux cleaned = 0.000306772 Jy
! Component: 150  -  total flux cleaned = 0.000316726 Jy
! Component: 200  -  total flux cleaned = 0.00033021 Jy
! Total flux subtracted in 200 components = 0.00033021 Jy
! Clean residual min=-0.001016 max=0.000876 Jy/beam
! Clean residual mean=-0.000002 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0583113 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 76 components and 0.0583113 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015309Jy  sigma=0.027238
! Fit after  self-cal, rms=0.015308Jy  sigma=0.027235
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.31227e-05 Jy
! Component: 100  -  total flux cleaned = 5.35873e-05 Jy
! Component: 150  -  total flux cleaned = 6.12681e-05 Jy
! Component: 200  -  total flux cleaned = 7.16872e-05 Jy
! Total flux subtracted in 200 components = 7.16872e-05 Jy
! Clean residual min=-0.001000 max=0.000885 Jy/beam
! Clean residual mean=-0.000002 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.058383 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 80 components and 0.058383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015299Jy  sigma=0.027244
! Fit after  self-cal, rms=0.015298Jy  sigma=0.027244
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.619 mas, bmaj=4.487 mas, bpa=-1.07 degrees
! Estimated noise=3.58884 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.619 x 4.487 at -1.07 degrees (North through East)
! Clean map  min=-0.0008197  max=0.041032 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.282 mas, bmaj=3.762 mas, bpa=-0.632 degrees
! Estimated noise=7.01746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0320051 Jy
! Component: 100  -  total flux cleaned = 0.0409801 Jy
! Component: 150  -  total flux cleaned = 0.0455715 Jy
! Component: 200  -  total flux cleaned = 0.0484951 Jy
! Total flux subtracted in 200 components = 0.0484951 Jy
! Clean residual min=-0.000870 max=0.001573 Jy/beam
! Clean residual mean=-0.000002 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.0484951 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0484951 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.619 mas, bmaj=4.487 mas, bpa=-1.07 degrees
! Estimated noise=3.58884 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00363426 Jy
! Component: 100  -  total flux cleaned = 0.00572524 Jy
! Component: 150  -  total flux cleaned = 0.00704651 Jy
! Component: 200  -  total flux cleaned = 0.00792277 Jy
! Total flux subtracted in 200 components = 0.00792277 Jy
! Clean residual min=-0.000923 max=0.000790 Jy/beam
! Clean residual mean=-0.000001 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.0564179 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 48 components and 0.0564179 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.606 mas, bmaj=7.113 mas, bpa=-7.762 degrees
! Estimated noise=4.39989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000981775 Jy
! Component: 100  -  total flux cleaned = 0.00143348 Jy
! Component: 150  -  total flux cleaned = 0.00168225 Jy
! Component: 200  -  total flux cleaned = 0.00181336 Jy
! Total flux subtracted in 200 components = 0.00181336 Jy
! Clean residual min=-0.000995 max=0.000867 Jy/beam
! Clean residual mean=-0.000002 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0582312 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.39853e-05 Jy
! Component: 100  -  total flux cleaned = 4.49284e-05 Jy
! Component: 150  -  total flux cleaned = 6.28235e-05 Jy
! Component: 200  -  total flux cleaned = 7.33702e-05 Jy
! Total flux subtracted in 200 components = 7.33702e-05 Jy
! Clean residual min=-0.000997 max=0.000870 Jy/beam
! Clean residual mean=-0.000002 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0583046 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 76 components and 0.0583046 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.619 mas, bmaj=4.487 mas, bpa=-1.07 degrees
! Estimated noise=3.58884 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000103928 Jy
! Component: 100  -  total flux cleaned = -7.70986e-05 Jy
! Component: 150  -  total flux cleaned = -7.0282e-05 Jy
! Component: 200  -  total flux cleaned = -5.82056e-05 Jy
! Total flux subtracted in 200 components = -5.82056e-05 Jy
! Clean residual min=-0.000826 max=0.000688 Jy/beam
! Clean residual mean=-0.000001 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.0582464 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 88 components and 0.0582464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015286Jy  sigma=0.027272
! Fit after  self-cal, rms=0.015284Jy  sigma=0.027270
wmodel /d2/scr/pima/bp171a6_uvs/J0853+1352_C_map.mod
! Writing 88 model components to file: /d2/scr/pima/bp171a6_uvs/J0853+1352_C_map.mod
wobs /d2/scr/pima/bp171a6_uvs/J0853+1352_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171a6_uvs/J0853+1352_C_uvs.fits
wwins /d2/scr/pima/bp171a6_uvs/J0853+1352_C_map.win
! wwins: Wrote 2 windows to /d2/scr/pima/bp171a6_uvs/J0853+1352_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00010841 Jy
! Component: 100  -  total flux cleaned = -0.000108695 Jy
! Component: 150  -  total flux cleaned = -0.000154689 Jy
! Component: 200  -  total flux cleaned = -0.000198774 Jy
! Component: 250  -  total flux cleaned = -0.000230733 Jy
! Component: 300  -  total flux cleaned = -0.000261007 Jy
! Component: 350  -  total flux cleaned = -0.000290527 Jy
! Component: 400  -  total flux cleaned = -0.00027163 Jy
! Component: 450  -  total flux cleaned = -0.000272038 Jy
! Component: 500  -  total flux cleaned = -0.000254165 Jy
! Component: 550  -  total flux cleaned = -0.000245546 Jy
! Component: 600  -  total flux cleaned = -0.000254406 Jy
! Component: 650  -  total flux cleaned = -0.000245891 Jy
! Component: 700  -  total flux cleaned = -0.00026266 Jy
! Component: 750  -  total flux cleaned = -0.000254425 Jy
! Component: 800  -  total flux cleaned = -0.000238275 Jy
! Component: 850  -  total flux cleaned = -0.000198869 Jy
! Component: 900  -  total flux cleaned = -0.000191235 Jy
! Component: 950  -  total flux cleaned = -0.000175971 Jy
! Component: 1000  -  total flux cleaned = -0.000153372 Jy
! Component: 1050  -  total flux cleaned = -0.000131013 Jy
! Component: 1100  -  total flux cleaned = -0.000123625 Jy
! Component: 1150  -  total flux cleaned = -0.000109138 Jy
! Component: 1200  -  total flux cleaned = -0.000102136 Jy
! Component: 1250  -  total flux cleaned = -9.51778e-05 Jy
! Component: 1300  -  total flux cleaned = -9.52228e-05 Jy
! Component: 1350  -  total flux cleaned = -8.14988e-05 Jy
! Component: 1400  -  total flux cleaned = -8.15498e-05 Jy
! Component: 1450  -  total flux cleaned = -5.48698e-05 Jy
! Component: 1500  -  total flux cleaned = -6.14847e-05 Jy
! Component: 1550  -  total flux cleaned = -4.1779e-05 Jy
! Component: 1600  -  total flux cleaned = -3.10717e-06 Jy
! Component: 1650  -  total flux cleaned = -9.56091e-06 Jy
! Component: 1700  -  total flux cleaned = 2.83227e-05 Jy
! Component: 1750  -  total flux cleaned = 1.58581e-05 Jy
! Component: 1800  -  total flux cleaned = 4.07082e-05 Jy
! Component: 1850  -  total flux cleaned = 5.90268e-05 Jy
! Component: 1900  -  total flux cleaned = 5.28351e-05 Jy
! Component: 1950  -  total flux cleaned = 5.28388e-05 Jy
! Component: 2000  -  total flux cleaned = 1.71666e-05 Jy
! Component: 2050  -  total flux cleaned = 2.31058e-05 Jy
! Component: 2100  -  total flux cleaned = -3.13697e-07 Jy
! Component: 2150  -  total flux cleaned = -1.18221e-05 Jy
! Component: 2200  -  total flux cleaned = -1.75166e-05 Jy
! Component: 2250  -  total flux cleaned = -1.18124e-05 Jy
! Component: 2300  -  total flux cleaned = -2.87857e-05 Jy
! Component: 2350  -  total flux cleaned = -1.75979e-05 Jy
! Component: 2400  -  total flux cleaned = -3.41945e-05 Jy
! Component: 2450  -  total flux cleaned = -2.86514e-05 Jy
! Component: 2500  -  total flux cleaned = -3.41611e-05 Jy
! Component: 2550  -  total flux cleaned = -5.03483e-05 Jy
! Component: 2600  -  total flux cleaned = -5.0375e-05 Jy
! Component: 2650  -  total flux cleaned = -7.697e-05 Jy
! Component: 2700  -  total flux cleaned = -7.16798e-05 Jy
! Component: 2750  -  total flux cleaned = -8.22278e-05 Jy
! Component: 2800  -  total flux cleaned = -9.78098e-05 Jy
! Component: 2850  -  total flux cleaned = -0.000113364 Jy
! Component: 2900  -  total flux cleaned = -0.000123608 Jy
! Component: 2950  -  total flux cleaned = -0.000123633 Jy
! Component: 3000  -  total flux cleaned = -0.000138837 Jy
! Component: 3050  -  total flux cleaned = -0.000133798 Jy
! Component: 3100  -  total flux cleaned = -0.000133721 Jy
! Component: 3150  -  total flux cleaned = -0.000133702 Jy
! Component: 3200  -  total flux cleaned = -0.00013856 Jy
! Component: 3250  -  total flux cleaned = -0.000143499 Jy
! Component: 3300  -  total flux cleaned = -0.000143584 Jy
! Component: 3350  -  total flux cleaned = -0.000162901 Jy
! Component: 3400  -  total flux cleaned = -0.000162923 Jy
! Component: 3450  -  total flux cleaned = -0.00016768 Jy
! Component: 3500  -  total flux cleaned = -0.000162961 Jy
! Component: 3550  -  total flux cleaned = -0.000167666 Jy
! Component: 3600  -  total flux cleaned = -0.000162986 Jy
! Component: 3650  -  total flux cleaned = -0.000172238 Jy
! Component: 3700  -  total flux cleaned = -0.000167646 Jy
! Component: 3750  -  total flux cleaned = -0.00019065 Jy
! Component: 3800  -  total flux cleaned = -0.00018149 Jy
! Component: 3850  -  total flux cleaned = -0.000181504 Jy
! Component: 3900  -  total flux cleaned = -0.000190537 Jy
! Component: 3950  -  total flux cleaned = -0.000195062 Jy
! Component: 4000  -  total flux cleaned = -0.00021744 Jy
! Component: 4050  -  total flux cleaned = -0.000208502 Jy
! Total flux subtracted in 4096 components = -0.000204068 Jy
! Clean residual min=-0.000298 max=0.000253 Jy/beam
! Clean residual mean=-0.000001 rms=0.000085 Jy/beam
! Combined flux in latest and established models = 0.0580423 Jy
keep
! Adding 361 model components to the UV plane model.
! The established model now contains 449 components and 0.0580423 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp171a6_uvs/J0853+1352_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.619 x 4.487 at -1.07 degrees (North through East)
! Clean map  min=-0.00046748  max=0.04108 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171a6_uvs/J0853+1352_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0410802 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 8.41432e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.61448 0.61448 1.22896 2.45792 4.91584 9.83168 19.6634 39.3267 78.6534
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.041 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  488.217 
quit
! Quitting program
! Log file /d2/scr/pima/bp171a6_uvs/J0853+1352_C_uvs.log closed on Wed Jan 15 19:53:14 2014