! Started logfile: /scr/pima/bp171a5_uvs/J1445-1614_C_uvs.log on Sat Apr 20 01:36:42 2013
obs /scr/pima/bp171a5_uvs/J1445-1614_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a5_uvs/J1445-1614_C_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.710317 visibilities/baseline/integration-bin.
! Found source: J1445-1614
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.14397e+09      3.2e+07          1      3.2e+07
!  02        2  4.17597e+09      3.2e+07          1      3.2e+07
!  03        3  4.20797e+09      3.2e+07          1      3.2e+07
!  04        4  4.23997e+09      3.2e+07          1      3.2e+07
!  05        5  4.43197e+09      3.2e+07          1      3.2e+07
!  06        6  4.52797e+09      3.2e+07          1      3.2e+07
!  07        7  4.55997e+09      3.2e+07          1      3.2e+07
!  08        8  4.59197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2864 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a5_uvs/J1445-1614_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007057Jy  sigma=0.711968
! Fit after  self-cal, rms=0.869507Jy  sigma=0.614729
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.192 mas, bmaj=3.326 mas, bpa=-9.938 degrees
! Estimated noise=27.6653 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0986337 Jy
! Component: 100  -  total flux cleaned = 0.121832 Jy
! Total flux subtracted in 100 components = 0.121832 Jy
! Clean residual min=-0.004477 max=0.008956 Jy/beam
! Clean residual mean=0.000002 rms=0.001238 Jy/beam
! Combined flux in latest and established models = 0.121832 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.121832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032357Jy  sigma=0.022863
! Fit after  self-cal, rms=0.032345Jy  sigma=0.022855
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00981379 Jy
! Component: 100  -  total flux cleaned = 0.0152721 Jy
! Total flux subtracted in 100 components = 0.0152721 Jy
! Clean residual min=-0.003348 max=0.004185 Jy/beam
! Clean residual mean=0.000002 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.137104 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 21 components and 0.137104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028872Jy  sigma=0.020398
! Fit after  self-cal, rms=0.028861Jy  sigma=0.020390
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.452 mas, bmaj=3.746 mas, bpa=-9.62 degrees
! Estimated noise=18.7153 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0037693 Jy
! Component: 100  -  total flux cleaned = 0.00564258 Jy
! Component: 150  -  total flux cleaned = 0.00665751 Jy
! Component: 200  -  total flux cleaned = 0.00720294 Jy
! Total flux subtracted in 200 components = 0.00720294 Jy
! Clean residual min=-0.002561 max=0.003008 Jy/beam
! Clean residual mean=0.000002 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.144307 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 39 components and 0.144307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028403Jy  sigma=0.020066
! Fit after  self-cal, rms=0.028401Jy  sigma=0.020066
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        0.93     KP        0.91     LA        1.07     
!   MK        1.05     NL        1.04     OV        0.95     PT        0.88     
!   SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     HN        0.98     KP        0.93     LA        1.08     
!   MK        1.00     NL        1.10     OV        1.01     PT        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     HN        0.98     KP        1.00     LA        1.02     
!   MK        1.03     NL        1.09     OV        1.00     PT        0.95     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        0.96     KP        0.99     LA        1.05     
!   MK        1.03     NL        0.73     OV        0.95     PT        1.00     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     HN        0.97     KP        0.99     LA        1.09     
!   MK        0.99     NL        1.02     OV        1.00     PT        0.92     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        1.03     KP        1.01     LA        1.14     
!   MK        0.99     NL        0.98     OV        0.99     PT        1.04     
!   SC        1.05     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        0.96     KP        0.95     LA        1.03     
!   MK        1.02     NL        1.02     OV        1.03     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        0.98     KP        1.00     LA        1.05     
!   MK        1.01     NL        0.99     OV        1.01     PT        0.96     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.028401Jy  sigma=0.020066
! Fit after  self-cal, rms=0.025397Jy  sigma=0.017931
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.467 mas, bmaj=3.771 mas, bpa=-9.512 degrees
! Estimated noise=18.7791 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000140822 Jy
! Component: 100  -  total flux cleaned = -0.000109925 Jy
! Component: 150  -  total flux cleaned = -4.88891e-05 Jy
! Component: 200  -  total flux cleaned = -5.80661e-06 Jy
! Total flux subtracted in 200 components = -5.80661e-06 Jy
! Clean residual min=-0.001743 max=0.001478 Jy/beam
! Clean residual mean=0.000001 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.144301 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 49 components and 0.144301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025379Jy  sigma=0.017920
! Fit after  self-cal, rms=0.025398Jy  sigma=0.017915
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025398Jy  sigma=0.017915
! Fit after  self-cal, rms=0.025417Jy  sigma=0.017913
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.468 mas, bmaj=3.775 mas, bpa=-9.522 degrees
! Estimated noise=18.7926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.18483e-05 Jy
! Component: 100  -  total flux cleaned = -6.133e-05 Jy
! Component: 150  -  total flux cleaned = -4.47059e-05 Jy
! Component: 200  -  total flux cleaned = -2.26799e-05 Jy
! Total flux subtracted in 200 components = -2.26799e-05 Jy
! Clean residual min=-0.001738 max=0.001491 Jy/beam
! Clean residual mean=0.000001 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.144278 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.144278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025409Jy  sigma=0.017909
! Fit after  self-cal, rms=0.025409Jy  sigma=0.017909
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.81369e-05 Jy
! Component: 100  -  total flux cleaned = 4.43905e-05 Jy
! Component: 150  -  total flux cleaned = 5.02752e-05 Jy
! Component: 200  -  total flux cleaned = 5.04198e-05 Jy
! Total flux subtracted in 200 components = 5.04198e-05 Jy
! Clean residual min=-0.001730 max=0.001495 Jy/beam
! Clean residual mean=0.000001 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.144329 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 56 components and 0.144329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025406Jy  sigma=0.017907
! Fit after  self-cal, rms=0.025405Jy  sigma=0.017907
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025405Jy  sigma=0.017907
! Fit after  self-cal, rms=0.025422Jy  sigma=0.017906
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.468 mas, bmaj=3.777 mas, bpa=-9.524 degrees
! Estimated noise=18.8042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.24489e-05 Jy
! Component: 100  -  total flux cleaned = -5.6063e-05 Jy
! Component: 150  -  total flux cleaned = -6.23127e-05 Jy
! Component: 200  -  total flux cleaned = -6.22791e-05 Jy
! Total flux subtracted in 200 components = -6.22791e-05 Jy
! Clean residual min=-0.001726 max=0.001514 Jy/beam
! Clean residual mean=0.000001 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.144266 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 56 components and 0.144266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025418Jy  sigma=0.017904
! Fit after  self-cal, rms=0.025418Jy  sigma=0.017904
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.89708e-05 Jy
! Component: 100  -  total flux cleaned = 2.39271e-05 Jy
! Component: 150  -  total flux cleaned = 2.38246e-05 Jy
! Component: 200  -  total flux cleaned = 2.38667e-05 Jy
! Total flux subtracted in 200 components = 2.38667e-05 Jy
! Clean residual min=-0.001719 max=0.001516 Jy/beam
! Clean residual mean=0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.14429 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 56 components and 0.14429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025416Jy  sigma=0.017903
! Fit after  self-cal, rms=0.025416Jy  sigma=0.017903
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025416Jy  sigma=0.017903
! Fit after  self-cal, rms=0.025426Jy  sigma=0.017902
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.301 mas, bmaj=6.815 mas, bpa=-6.713 degrees
! Estimated noise=25.8809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000284432 Jy
! Component: 100  -  total flux cleaned = -0.000283408 Jy
! Component: 150  -  total flux cleaned = -0.00028972 Jy
! Component: 200  -  total flux cleaned = -0.000294252 Jy
! Total flux subtracted in 200 components = -0.000294252 Jy
! Clean residual min=-0.002056 max=0.001733 Jy/beam
! Clean residual mean=0.000002 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.143996 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 59 components and 0.143996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025436Jy  sigma=0.017909
! Fit after  self-cal, rms=0.025432Jy  sigma=0.017906
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.8883e-05 Jy
! Component: 100  -  total flux cleaned = -1.20349e-05 Jy
! Component: 150  -  total flux cleaned = -6.93386e-06 Jy
! Component: 200  -  total flux cleaned = -6.88076e-06 Jy
! Total flux subtracted in 200 components = -6.88076e-06 Jy
! Clean residual min=-0.002051 max=0.001730 Jy/beam
! Clean residual mean=0.000002 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.143989 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 60 components and 0.143989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025438Jy  sigma=0.017910
! Fit after  self-cal, rms=0.025436Jy  sigma=0.017908
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.469 mas, bmaj=3.779 mas, bpa=-9.524 degrees
! Estimated noise=18.8109 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.469 x 3.779 at -9.524 degrees (North through East)
! Clean map  min=-0.0016423  max=0.12982 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.207 mas, bmaj=3.348 mas, bpa=-10.12 degrees
! Estimated noise=27.3496 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0989701 Jy
! Component: 100  -  total flux cleaned = 0.12194 Jy
! Component: 150  -  total flux cleaned = 0.131266 Jy
! Component: 200  -  total flux cleaned = 0.136284 Jy
! Total flux subtracted in 200 components = 0.136284 Jy
! Clean residual min=-0.002773 max=0.002858 Jy/beam
! Clean residual mean=0.000000 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.136284 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.136284 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.469 mas, bmaj=3.779 mas, bpa=-9.524 degrees
! Estimated noise=18.8109 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00380686 Jy
! Component: 100  -  total flux cleaned = 0.00570433 Jy
! Component: 150  -  total flux cleaned = 0.00678359 Jy
! Component: 200  -  total flux cleaned = 0.00741267 Jy
! Total flux subtracted in 200 components = 0.00741267 Jy
! Clean residual min=-0.001802 max=0.001480 Jy/beam
! Clean residual mean=0.000001 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.143696 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 33 components and 0.143696 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.301 mas, bmaj=6.815 mas, bpa=-6.713 degrees
! Estimated noise=25.8809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000231455 Jy
! Component: 100  -  total flux cleaned = 0.000263935 Jy
! Component: 150  -  total flux cleaned = 0.000285842 Jy
! Component: 200  -  total flux cleaned = 0.000302158 Jy
! Total flux subtracted in 200 components = 0.000302158 Jy
! Clean residual min=-0.002062 max=0.001743 Jy/beam
! Clean residual mean=0.000002 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.143998 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.25934e-05 Jy
! Component: 100  -  total flux cleaned = 1.79349e-05 Jy
! Component: 150  -  total flux cleaned = 2.25356e-05 Jy
! Component: 200  -  total flux cleaned = 1.84716e-05 Jy
! Total flux subtracted in 200 components = 1.84716e-05 Jy
! Clean residual min=-0.002051 max=0.001740 Jy/beam
! Clean residual mean=0.000002 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.144017 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 42 components and 0.144017 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.469 mas, bmaj=3.779 mas, bpa=-9.524 degrees
! Estimated noise=18.8109 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126885 Jy
! Component: 100  -  total flux cleaned = 0.000125143 Jy
! Component: 150  -  total flux cleaned = 0.000157307 Jy
! Component: 200  -  total flux cleaned = 0.000196916 Jy
! Total flux subtracted in 200 components = 0.000196916 Jy
! Clean residual min=-0.001746 max=0.001517 Jy/beam
! Clean residual mean=0.000001 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.144214 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 46 components and 0.144214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025423Jy  sigma=0.017900
! Fit after  self-cal, rms=0.025422Jy  sigma=0.017900
wmodel /scr/pima/bp171a5_uvs/J1445-1614_C_map.mod
! Writing 46 model components to file: /scr/pima/bp171a5_uvs/J1445-1614_C_map.mod
wobs /scr/pima/bp171a5_uvs/J1445-1614_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a5_uvs/J1445-1614_C_uvs.fits
wwins /scr/pima/bp171a5_uvs/J1445-1614_C_map.win
! wwins: Wrote 1 windows to /scr/pima/bp171a5_uvs/J1445-1614_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00039715 Jy
! Component: 100  -  total flux cleaned = -0.000578287 Jy
! Component: 150  -  total flux cleaned = -0.000694271 Jy
! Component: 200  -  total flux cleaned = -0.000760658 Jy
! Component: 250  -  total flux cleaned = -0.000801637 Jy
! Component: 300  -  total flux cleaned = -0.000840852 Jy
! Component: 350  -  total flux cleaned = -0.0008601 Jy
! Component: 400  -  total flux cleaned = -0.000824187 Jy
! Component: 450  -  total flux cleaned = -0.000806697 Jy
! Component: 500  -  total flux cleaned = -0.000756293 Jy
! Component: 550  -  total flux cleaned = -0.000724147 Jy
! Component: 600  -  total flux cleaned = -0.000660961 Jy
! Component: 650  -  total flux cleaned = -0.000599578 Jy
! Component: 700  -  total flux cleaned = -0.000554697 Jy
! Component: 750  -  total flux cleaned = -0.00052553 Jy
! Component: 800  -  total flux cleaned = -0.00048309 Jy
! Component: 850  -  total flux cleaned = -0.000414198 Jy
! Component: 900  -  total flux cleaned = -0.000360204 Jy
! Component: 950  -  total flux cleaned = -0.000333968 Jy
! Component: 1000  -  total flux cleaned = -0.000308489 Jy
! Component: 1050  -  total flux cleaned = -0.000308635 Jy
! Component: 1100  -  total flux cleaned = -0.000271233 Jy
! Component: 1150  -  total flux cleaned = -0.000234695 Jy
! Component: 1200  -  total flux cleaned = -0.000174588 Jy
! Component: 1250  -  total flux cleaned = -0.000150806 Jy
! Component: 1300  -  total flux cleaned = -0.000104239 Jy
! Component: 1350  -  total flux cleaned = -0.000104194 Jy
! Component: 1400  -  total flux cleaned = -4.77643e-05 Jy
! Component: 1450  -  total flux cleaned = -4.77555e-05 Jy
! Component: 1500  -  total flux cleaned = -1.4631e-05 Jy
! Component: 1550  -  total flux cleaned = 3.95201e-05 Jy
! Component: 1600  -  total flux cleaned = 6.10701e-05 Jy
! Component: 1650  -  total flux cleaned = 9.26964e-05 Jy
! Component: 1700  -  total flux cleaned = 0.000144854 Jy
! Component: 1750  -  total flux cleaned = 0.000175556 Jy
! Component: 1800  -  total flux cleaned = 0.000216033 Jy
! Component: 1850  -  total flux cleaned = 0.000245927 Jy
! Component: 1900  -  total flux cleaned = 0.000285275 Jy
! Component: 1950  -  total flux cleaned = 0.000285202 Jy
! Component: 2000  -  total flux cleaned = 0.000304395 Jy
! Component: 2050  -  total flux cleaned = 0.000323438 Jy
! Component: 2100  -  total flux cleaned = 0.000351487 Jy
! Component: 2150  -  total flux cleaned = 0.000388514 Jy
! Component: 2200  -  total flux cleaned = 0.00039768 Jy
! Component: 2250  -  total flux cleaned = 0.000443171 Jy
! Component: 2300  -  total flux cleaned = 0.00047003 Jy
! Component: 2350  -  total flux cleaned = 0.000505524 Jy
! Component: 2400  -  total flux cleaned = 0.00055808 Jy
! Component: 2450  -  total flux cleaned = 0.00055808 Jy
! Component: 2500  -  total flux cleaned = 0.000583944 Jy
! Component: 2550  -  total flux cleaned = 0.00059252 Jy
! Component: 2600  -  total flux cleaned = 0.000626104 Jy
! Component: 2650  -  total flux cleaned = 0.000667706 Jy
! Component: 2700  -  total flux cleaned = 0.00067602 Jy
! Component: 2750  -  total flux cleaned = 0.000733031 Jy
! Component: 2800  -  total flux cleaned = 0.000740941 Jy
! Component: 2850  -  total flux cleaned = 0.000764783 Jy
! Component: 2900  -  total flux cleaned = 0.000788554 Jy
! Component: 2950  -  total flux cleaned = 0.000827645 Jy
! Component: 3000  -  total flux cleaned = 0.000835412 Jy
! Component: 3050  -  total flux cleaned = 0.000850724 Jy
! Component: 3100  -  total flux cleaned = 0.000843148 Jy
! Component: 3150  -  total flux cleaned = 0.000880838 Jy
! Component: 3200  -  total flux cleaned = 0.000873363 Jy
! Component: 3250  -  total flux cleaned = 0.000865991 Jy
! Component: 3300  -  total flux cleaned = 0.000866007 Jy
! Component: 3350  -  total flux cleaned = 0.000866068 Jy
! Component: 3400  -  total flux cleaned = 0.000902125 Jy
! Component: 3450  -  total flux cleaned = 0.000887691 Jy
! Component: 3500  -  total flux cleaned = 0.0008805 Jy
! Component: 3550  -  total flux cleaned = 0.000859281 Jy
! Component: 3600  -  total flux cleaned = 0.000866276 Jy
! Component: 3650  -  total flux cleaned = 0.000873196 Jy
! Component: 3700  -  total flux cleaned = 0.000866211 Jy
! Component: 3750  -  total flux cleaned = 0.000873038 Jy
! Component: 3800  -  total flux cleaned = 0.000879733 Jy
! Component: 3850  -  total flux cleaned = 0.000866198 Jy
! Component: 3900  -  total flux cleaned = 0.000846025 Jy
! Component: 3950  -  total flux cleaned = 0.000846063 Jy
! Component: 4000  -  total flux cleaned = 0.000839394 Jy
! Component: 4050  -  total flux cleaned = 0.000852539 Jy
! Total flux subtracted in 4096 components = 0.000859123 Jy
! Clean residual min=-0.000374 max=0.000407 Jy/beam
! Clean residual mean=-0.000000 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.145073 Jy
keep
! Adding 276 model components to the UV plane model.
! The established model now contains 322 components and 0.145073 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a5_uvs/J1445-1614_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.469 x 3.779 at -9.524 degrees (North through East)
! Clean map  min=-0.0008526  max=0.12987 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a5_uvs/J1445-1614_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.129871 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000110135 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.254411 0.254411 0.508821 1.01764 2.03528 4.07057 8.14114 16.2823 32.5645 65.1291
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.129 
quit
! Quitting program
! Log file /scr/pima/bp171a5_uvs/J1445-1614_C_uvs.log closed on Sat Apr 20 01:36:47 2013