! Started logfile: /scr/pima/bp171a5_uvs/J1110-1145_X_uvs.log on Sat Apr 20 03:59:48 2013
obs /scr/pima/bp171a5_uvs/J1110-1145_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a5_uvs/J1110-1145_X_uva.fits
! AN table 1: 12 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.581481 visibilities/baseline/integration-bin.
! Found source: J1110-1145
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2512 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a5_uvs/J1110-1145_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.964755Jy  sigma=0.682003
! Fit after  self-cal, rms=0.921596Jy  sigma=0.651496
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7199 mas, bmaj=1.915 mas, bpa=-1.557 degrees
! Estimated noise=29.4372 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0577774 Jy
! Component: 100  -  total flux cleaned = 0.0715865 Jy
! Total flux subtracted in 100 components = 0.0715865 Jy
! Clean residual min=-0.005970 max=0.013962 Jy/beam
! Clean residual mean=-0.000001 rms=0.001793 Jy/beam
! Combined flux in latest and established models = 0.0715865 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0715865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038302Jy  sigma=0.027065
! Fit after  self-cal, rms=0.038269Jy  sigma=0.027042
! Inverting map 
! Added new window around map position (1.4, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122973 Jy
! Component: 100  -  total flux cleaned = 0.0192014 Jy
! Total flux subtracted in 100 components = 0.0192014 Jy
! Clean residual min=-0.005473 max=0.006897 Jy/beam
! Clean residual mean=-0.000001 rms=0.001380 Jy/beam
! Combined flux in latest and established models = 0.0907879 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 0.0907879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031533Jy  sigma=0.022279
! Fit after  self-cal, rms=0.031098Jy  sigma=0.021970
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8086 mas, bmaj=2.144 mas, bpa=-2.325 degrees
! Estimated noise=19.9575 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100437 Jy
! Component: 100  -  total flux cleaned = 0.0159047 Jy
! Component: 150  -  total flux cleaned = 0.0199788 Jy
! Component: 200  -  total flux cleaned = 0.0228385 Jy
! Total flux subtracted in 200 components = 0.0228385 Jy
! Clean residual min=-0.003696 max=0.003854 Jy/beam
! Clean residual mean=-0.000006 rms=0.000907 Jy/beam
! Combined flux in latest and established models = 0.113626 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 55 components and 0.113626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027360Jy  sigma=0.019326
! Fit after  self-cal, rms=0.027082Jy  sigma=0.019129
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.12     HN        0.94     KP        0.89     
!   LA        1.04     MK        0.95     NL        1.15     OV        1.00     
!   PT        0.82     SC        0.95     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        0.97     HN        0.99     KP        0.91     
!   LA        0.97     MK        1.02     NL        1.19     OV        0.94     
!   PT        0.88     SC        0.90     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.04     HN        1.03     KP        1.04     
!   LA        0.93     MK        1.02     NL        1.12     OV        0.97     
!   PT        0.85     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.09     HN        1.04     KP        0.91     
!   LA        0.97     MK        1.07     NL        1.10     OV        0.94     
!   PT        0.87     SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.96     KP        1.05     
!   LA        0.92     MK        0.95     NL        1.09     OV        0.94     
!   PT        0.81     SC        0.97     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        1.03     KP        1.04     
!   LA        0.95     MK        0.97     NL        1.10     OV        0.99     
!   PT        0.89     SC        0.95     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        0.98     KP        0.97     
!   LA        0.95     MK        1.03     NL        1.17     OV        1.01     
!   PT        0.84     SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.26     FD        1.02     HN        1.04     KP        1.06     
!   LA        0.87     MK        0.98     NL        1.10     OV        1.02     
!   PT        0.79     SC        1.16     
! 
! 
! Fit before self-cal, rms=0.027082Jy  sigma=0.019129
! Fit after  self-cal, rms=0.024736Jy  sigma=0.017560
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8204 mas, bmaj=2.182 mas, bpa=-1.529 degrees
! Estimated noise=19.9008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00075048 Jy
! Component: 100  -  total flux cleaned = 0.000848901 Jy
! Component: 150  -  total flux cleaned = 0.000798992 Jy
! Component: 200  -  total flux cleaned = 0.00077764 Jy
! Total flux subtracted in 200 components = 0.00077764 Jy
! Clean residual min=-0.001460 max=0.001524 Jy/beam
! Clean residual mean=0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.114404 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 66 components and 0.114404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024664Jy  sigma=0.017508
! Fit after  self-cal, rms=0.024693Jy  sigma=0.017497
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024693Jy  sigma=0.017497
! Fit after  self-cal, rms=0.024641Jy  sigma=0.017495
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8197 mas, bmaj=2.181 mas, bpa=-1.538 degrees
! Estimated noise=19.873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000279598 Jy
! Component: 100  -  total flux cleaned = 0.000338839 Jy
! Component: 150  -  total flux cleaned = 0.000323627 Jy
! Component: 200  -  total flux cleaned = 0.000283763 Jy
! Total flux subtracted in 200 components = 0.000283763 Jy
! Clean residual min=-0.001405 max=0.001532 Jy/beam
! Clean residual mean=0.000000 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.114688 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 71 components and 0.114688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024616Jy  sigma=0.017477
! Fit after  self-cal, rms=0.024613Jy  sigma=0.017476
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.78337e-05 Jy
! Component: 100  -  total flux cleaned = 6.65311e-05 Jy
! Component: 150  -  total flux cleaned = 3.23579e-05 Jy
! Component: 200  -  total flux cleaned = -9.71487e-06 Jy
! Total flux subtracted in 200 components = -9.71487e-06 Jy
! Clean residual min=-0.001394 max=0.001521 Jy/beam
! Clean residual mean=0.000000 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.114678 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 75 components and 0.114678 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024602Jy  sigma=0.017468
! Fit after  self-cal, rms=0.024601Jy  sigma=0.017467
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024601Jy  sigma=0.017467
! Fit after  self-cal, rms=0.024550Jy  sigma=0.017466
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8197 mas, bmaj=2.181 mas, bpa=-1.534 degrees
! Estimated noise=19.846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.00501e-05 Jy
! Component: 100  -  total flux cleaned = 8.0438e-05 Jy
! Component: 150  -  total flux cleaned = 5.20851e-05 Jy
! Component: 200  -  total flux cleaned = 3.5172e-05 Jy
! Total flux subtracted in 200 components = 3.5172e-05 Jy
! Clean residual min=-0.001383 max=0.001516 Jy/beam
! Clean residual mean=0.000000 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.114713 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 75 components and 0.114713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024541Jy  sigma=0.017460
! Fit after  self-cal, rms=0.024540Jy  sigma=0.017459
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.21555e-05 Jy
! Component: 100  -  total flux cleaned = -3.24948e-06 Jy
! Component: 150  -  total flux cleaned = -3.33011e-05 Jy
! Component: 200  -  total flux cleaned = -5.43879e-05 Jy
! Total flux subtracted in 200 components = -5.43879e-05 Jy
! Clean residual min=-0.001387 max=0.001506 Jy/beam
! Clean residual mean=0.000000 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.114659 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 77 components and 0.114659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024535Jy  sigma=0.017456
! Fit after  self-cal, rms=0.024535Jy  sigma=0.017456
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024535Jy  sigma=0.017456
! Fit after  self-cal, rms=0.024515Jy  sigma=0.017455
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.022 mas, bmaj=3.99 mas, bpa=4.545 degrees
! Estimated noise=26.347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000178699 Jy
! Component: 100  -  total flux cleaned = 0.000150423 Jy
! Component: 150  -  total flux cleaned = 0.00012525 Jy
! Component: 200  -  total flux cleaned = 9.48446e-05 Jy
! Total flux subtracted in 200 components = 9.48446e-05 Jy
! Clean residual min=-0.001650 max=0.002195 Jy/beam
! Clean residual mean=0.000000 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.114754 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 81 components and 0.114754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024519Jy  sigma=0.017458
! Fit after  self-cal, rms=0.024518Jy  sigma=0.017456
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.2, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191411 Jy
! Component: 100  -  total flux cleaned = 0.00197779 Jy
! Component: 150  -  total flux cleaned = 0.00186915 Jy
! Component: 200  -  total flux cleaned = 0.00175699 Jy
! Total flux subtracted in 200 components = 0.00175699 Jy
! Clean residual min=-0.001452 max=0.001606 Jy/beam
! Clean residual mean=0.000000 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.116511 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 115 components and 0.116511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024440Jy  sigma=0.017404
! Fit after  self-cal, rms=0.024431Jy  sigma=0.017400
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.82 mas, bmaj=2.181 mas, bpa=-1.525 degrees
! Estimated noise=19.8353 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.82 x 2.181 at -1.525 degrees (North through East)
! Clean map  min=-0.0011917  max=0.073476 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7222 mas, bmaj=1.926 mas, bpa=-1.42 degrees
! Estimated noise=29.0696 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0563394 Jy
! Component: 100  -  total flux cleaned = 0.0748396 Jy
! Component: 150  -  total flux cleaned = 0.0853158 Jy
! Component: 200  -  total flux cleaned = 0.0923914 Jy
! Total flux subtracted in 200 components = 0.0923914 Jy
! Clean residual min=-0.003589 max=0.004340 Jy/beam
! Clean residual mean=0.000001 rms=0.001115 Jy/beam
! Combined flux in latest and established models = 0.0923914 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0923914 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.82 mas, bmaj=2.181 mas, bpa=-1.525 degrees
! Estimated noise=19.8353 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00771063 Jy
! Component: 100  -  total flux cleaned = 0.0124654 Jy
! Component: 150  -  total flux cleaned = 0.0156164 Jy
! Component: 200  -  total flux cleaned = 0.0178532 Jy
! Total flux subtracted in 200 components = 0.0178532 Jy
! Clean residual min=-0.001605 max=0.001649 Jy/beam
! Clean residual mean=0.000000 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.110245 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 61 components and 0.110245 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.022 mas, bmaj=3.99 mas, bpa=4.545 degrees
! Estimated noise=26.347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282458 Jy
! Component: 100  -  total flux cleaned = 0.00444561 Jy
! Component: 150  -  total flux cleaned = 0.00537058 Jy
! Component: 200  -  total flux cleaned = 0.00573166 Jy
! Total flux subtracted in 200 components = 0.00573166 Jy
! Clean residual min=-0.001551 max=0.001648 Jy/beam
! Clean residual mean=0.000001 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.115976 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.03905e-06 Jy
! Component: 100  -  total flux cleaned = -1.9994e-05 Jy
! Component: 150  -  total flux cleaned = -1.83604e-05 Jy
! Component: 200  -  total flux cleaned = -1.8196e-05 Jy
! Total flux subtracted in 200 components = -1.8196e-05 Jy
! Clean residual min=-0.001453 max=0.001505 Jy/beam
! Clean residual mean=0.000000 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.115958 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 117 components and 0.115958 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.82 mas, bmaj=2.181 mas, bpa=-1.525 degrees
! Estimated noise=19.8353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.50189e-05 Jy
! Component: 100  -  total flux cleaned = 0.000124188 Jy
! Component: 150  -  total flux cleaned = 0.000124243 Jy
! Component: 200  -  total flux cleaned = 7.80024e-05 Jy
! Total flux subtracted in 200 components = 7.80024e-05 Jy
! Clean residual min=-0.001377 max=0.001217 Jy/beam
! Clean residual mean=0.000000 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.116036 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 145 components and 0.116036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024388Jy  sigma=0.017366
! Fit after  self-cal, rms=0.024382Jy  sigma=0.017363
wmodel /scr/pima/bp171a5_uvs/J1110-1145_X_map.mod
! Writing 145 model components to file: /scr/pima/bp171a5_uvs/J1110-1145_X_map.mod
wobs /scr/pima/bp171a5_uvs/J1110-1145_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a5_uvs/J1110-1145_X_uvs.fits
wwins /scr/pima/bp171a5_uvs/J1110-1145_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bp171a5_uvs/J1110-1145_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000212526 Jy
! Component: 100  -  total flux cleaned = 1.72213e-05 Jy
! Component: 150  -  total flux cleaned = 0.000195557 Jy
! Component: 200  -  total flux cleaned = 0.000441618 Jy
! Component: 250  -  total flux cleaned = 0.000623232 Jy
! Component: 300  -  total flux cleaned = 0.000833146 Jy
! Component: 350  -  total flux cleaned = 0.000952291 Jy
! Component: 400  -  total flux cleaned = 0.00110092 Jy
! Component: 450  -  total flux cleaned = 0.00122966 Jy
! Component: 500  -  total flux cleaned = 0.00135517 Jy
! Component: 550  -  total flux cleaned = 0.00146271 Jy
! Component: 600  -  total flux cleaned = 0.00159771 Jy
! Component: 650  -  total flux cleaned = 0.00171508 Jy
! Component: 700  -  total flux cleaned = 0.00185837 Jy
! Component: 750  -  total flux cleaned = 0.00195684 Jy
! Component: 800  -  total flux cleaned = 0.00202585 Jy
! Component: 850  -  total flux cleaned = 0.00213337 Jy
! Component: 900  -  total flux cleaned = 0.00214665 Jy
! Component: 950  -  total flux cleaned = 0.00222442 Jy
! Component: 1000  -  total flux cleaned = 0.00228822 Jy
! Component: 1050  -  total flux cleaned = 0.00231328 Jy
! Component: 1100  -  total flux cleaned = 0.00235018 Jy
! Component: 1150  -  total flux cleaned = 0.00237446 Jy
! Component: 1200  -  total flux cleaned = 0.00242196 Jy
! Component: 1250  -  total flux cleaned = 0.0024221 Jy
! Component: 1300  -  total flux cleaned = 0.00245656 Jy
! Component: 1350  -  total flux cleaned = 0.00247917 Jy
! Component: 1400  -  total flux cleaned = 0.00247935 Jy
! Component: 1450  -  total flux cleaned = 0.00251208 Jy
! Component: 1500  -  total flux cleaned = 0.00258677 Jy
! Component: 1550  -  total flux cleaned = 0.00256564 Jy
! Component: 1600  -  total flux cleaned = 0.00260703 Jy
! Component: 1650  -  total flux cleaned = 0.00262751 Jy
! Component: 1700  -  total flux cleaned = 0.0026678 Jy
! Component: 1750  -  total flux cleaned = 0.00270751 Jy
! Component: 1800  -  total flux cleaned = 0.00270785 Jy
! Component: 1850  -  total flux cleaned = 0.00274664 Jy
! Component: 1900  -  total flux cleaned = 0.0027751 Jy
! Component: 1950  -  total flux cleaned = 0.00276557 Jy
! Component: 2000  -  total flux cleaned = 0.00276557 Jy
! Component: 2050  -  total flux cleaned = 0.00277496 Jy
! Component: 2100  -  total flux cleaned = 0.00282037 Jy
! Component: 2150  -  total flux cleaned = 0.00282029 Jy
! Component: 2200  -  total flux cleaned = 0.00281147 Jy
! Component: 2250  -  total flux cleaned = 0.00282902 Jy
! Component: 2300  -  total flux cleaned = 0.00284615 Jy
! Component: 2350  -  total flux cleaned = 0.00284612 Jy
! Component: 2400  -  total flux cleaned = 0.00282935 Jy
! Component: 2450  -  total flux cleaned = 0.00285439 Jy
! Component: 2500  -  total flux cleaned = 0.00283797 Jy
! Component: 2550  -  total flux cleaned = 0.00285432 Jy
! Component: 2600  -  total flux cleaned = 0.00287036 Jy
! Component: 2650  -  total flux cleaned = 0.00284639 Jy
! Component: 2700  -  total flux cleaned = 0.00288595 Jy
! Component: 2750  -  total flux cleaned = 0.0029015 Jy
! Component: 2800  -  total flux cleaned = 0.002886 Jy
! Component: 2850  -  total flux cleaned = 0.00289372 Jy
! Component: 2900  -  total flux cleaned = 0.00291662 Jy
! Component: 2950  -  total flux cleaned = 0.00293166 Jy
! Component: 3000  -  total flux cleaned = 0.00295401 Jy
! Component: 3050  -  total flux cleaned = 0.00298346 Jy
! Component: 3100  -  total flux cleaned = 0.00297623 Jy
! Component: 3150  -  total flux cleaned = 0.00300515 Jy
! Component: 3200  -  total flux cleaned = 0.00301233 Jy
! Component: 3250  -  total flux cleaned = 0.00301951 Jy
! Component: 3300  -  total flux cleaned = 0.00302658 Jy
! Component: 3350  -  total flux cleaned = 0.00303351 Jy
! Component: 3400  -  total flux cleaned = 0.00305422 Jy
! Component: 3450  -  total flux cleaned = 0.00306786 Jy
! Component: 3500  -  total flux cleaned = 0.0030678 Jy
! Component: 3550  -  total flux cleaned = 0.00307458 Jy
! Component: 3600  -  total flux cleaned = 0.00309475 Jy
! Component: 3650  -  total flux cleaned = 0.00311461 Jy
! Component: 3700  -  total flux cleaned = 0.00310149 Jy
! Component: 3750  -  total flux cleaned = 0.00312113 Jy
! Component: 3800  -  total flux cleaned = 0.00312109 Jy
! Component: 3850  -  total flux cleaned = 0.00312744 Jy
! Component: 3900  -  total flux cleaned = 0.00313378 Jy
! Component: 3950  -  total flux cleaned = 0.00310844 Jy
! Component: 4000  -  total flux cleaned = 0.00310846 Jy
! Component: 4050  -  total flux cleaned = 0.00310847 Jy
! Total flux subtracted in 4096 components = 0.00311467 Jy
! Clean residual min=-0.000381 max=0.000396 Jy/beam
! Clean residual mean=-0.000000 rms=0.000104 Jy/beam
! Combined flux in latest and established models = 0.119151 Jy
keep
! Adding 272 model components to the UV plane model.
! The established model now contains 417 components and 0.119151 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a5_uvs/J1110-1145_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.82 x 2.181 at -1.525 degrees (North through East)
! Clean map  min=-0.00086871  max=0.074288 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a5_uvs/J1110-1145_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0742883 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000104046 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.420172 0.420172 0.840344 1.68069 3.36138 6.72275 13.4455 26.891 53.782
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.074 
quit
! Quitting program
! Log file /scr/pima/bp171a5_uvs/J1110-1145_X_uvs.log closed on Sat Apr 20 03:59:51 2013