! Started logfile: difmap.log_66 on Sat Feb 8 01:23:26 2014 ![@/tmp/difmap__28461.1] ! Obeying initialization file: /tmp/difmap__28461.1 ![@/home/lpetrov/config/difmap.cnf] device /XW ! Attempting to open device: '/XW' vflags="fb3" integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float taper_size taper_size = 70. integer field_size field_size = 1024 float field_cell field_cell = 0.1 float old_peak float new_peak float flux_cutoff ![Exited script file: /home/lpetrov/config/difmap.cnf] ![@/tmp/difmap__28461.2] ![Exited script file: /tmp/difmap__28461.2] obs J1156+312A_C_uva.fits ! Reading UV FITS file: J1156+312A_C_uva.fits ! AN table 1: 3 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.333333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1156+312A ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 288 visibilities. ![Exited script file: /tmp/difmap__28461.1] sele I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 field_size=1024 field_cell=0.2 taper_size = 50. mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.014473Jy sigma=47.395977 ! Fit after self-cal, rms=0.935142Jy sigma=44.372374 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. radplot ! Using default options string "m1" ! Move the cursor into the plot window and press 'H' for help uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clrmod true,true clean 200, 0.02 ! Inverting map and beam ! Estimated beam: bmin=2.353 mas, bmaj=17.14 mas, bpa=-31.09 degrees ! Estimated noise=1.43818 mJy/beam. ! clean: niter=200 gain=0.02 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177666 Jy ! Component: 100 - total flux cleaned = 0.0234865 Jy ! Component: 150 - total flux cleaned = 0.0251788 Jy ! Component: 200 - total flux cleaned = 0.027406 Jy ! Total flux subtracted in 200 components = 0.027406 Jy ! Clean residual min=-0.018062 max=0.018060 Jy/beam ! Clean residual mean=-0.000077 rms=0.010254 Jy/beam ! Combined flux in latest and established models = 0.027406 Jy mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.149625Jy sigma=6.900731 ! Fit after self-cal, rms=0.149625Jy sigma=6.900731 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.353 mas, bmaj=17.14 mas, bpa=-31.09 degrees ! Estimated noise=1.43818 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151628 Jy ! Component: 100 - total flux cleaned = 0.0274666 Jy ! Component: 150 - total flux cleaned = 0.0388751 Jy ! Component: 200 - total flux cleaned = 0.0496678 Jy ! Component: 250 - total flux cleaned = 0.0598796 Jy ! Component: 300 - total flux cleaned = 0.0695421 Jy ! Component: 350 - total flux cleaned = 0.0786917 Jy ! Component: 400 - total flux cleaned = 0.0873818 Jy ! Component: 450 - total flux cleaned = 0.0956558 Jy ! Component: 500 - total flux cleaned = 0.103549 Jy ! Component: 550 - total flux cleaned = 0.111088 Jy ! Component: 600 - total flux cleaned = 0.118295 Jy ! Component: 650 - total flux cleaned = 0.125188 Jy ! Component: 700 - total flux cleaned = 0.131784 Jy ! Component: 750 - total flux cleaned = 0.138098 Jy ! Component: 800 - total flux cleaned = 0.144143 Jy ! Total flux subtracted in 800 components = 0.144143 Jy ! Clean residual min=-0.016296 max=0.016873 Jy/beam ! Clean residual mean=-0.000072 rms=0.008635 Jy/beam ! Combined flux in latest and established models = 0.144143 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 88 model components to the UV plane model. ! The established model now contains 88 components and 0.144143 Jy ! Inverting map and beam ! Estimated beam: bmin=2.731 mas, bmaj=15.09 mas, bpa=-31.71 degrees ! Estimated noise=1.01458 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127186 Jy ! Component: 100 - total flux cleaned = 0.0241057 Jy ! Component: 150 - total flux cleaned = 0.0346828 Jy ! Component: 200 - total flux cleaned = 0.0445896 Jy ! Component: 250 - total flux cleaned = 0.0539146 Jy ! Component: 300 - total flux cleaned = 0.0627445 Jy ! Component: 350 - total flux cleaned = 0.0711234 Jy ! Component: 400 - total flux cleaned = 0.0790886 Jy ! Component: 450 - total flux cleaned = 0.0857777 Jy ! Component: 500 - total flux cleaned = 0.0910211 Jy ! Component: 550 - total flux cleaned = 0.09606 Jy ! Component: 600 - total flux cleaned = 0.100901 Jy ! Component: 650 - total flux cleaned = 0.105551 Jy ! Component: 700 - total flux cleaned = 0.11002 Jy ! Component: 750 - total flux cleaned = 0.114079 Jy ! Component: 800 - total flux cleaned = 0.118211 Jy ! Component: 850 - total flux cleaned = 0.121964 Jy ! Component: 900 - total flux cleaned = 0.125788 Jy ! Component: 950 - total flux cleaned = 0.129261 Jy ! Component: 1000 - total flux cleaned = 0.132605 Jy ! Component: 1050 - total flux cleaned = 0.136012 Jy ! Component: 1100 - total flux cleaned = 0.139107 Jy ! Component: 1150 - total flux cleaned = 0.142088 Jy ! Component: 1200 - total flux cleaned = 0.144959 Jy ! Total flux subtracted in 1200 components = 0.144959 Jy ! Clean residual min=-0.016753 max=0.016543 Jy/beam ! Clean residual mean=-0.000073 rms=0.007797 Jy/beam ! Combined flux in latest and established models = 0.289102 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.149625Jy sigma=6.900731 ! Fit after self-cal, rms=0.149625Jy sigma=6.900731 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.353 mas, bmaj=17.14 mas, bpa=-31.09 degrees ! Estimated noise=1.43818 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151628 Jy ! Component: 100 - total flux cleaned = 0.0274666 Jy ! Component: 150 - total flux cleaned = 0.0388751 Jy ! Component: 200 - total flux cleaned = 0.0496678 Jy ! Component: 250 - total flux cleaned = 0.0598796 Jy ! Component: 300 - total flux cleaned = 0.0695421 Jy ! Component: 350 - total flux cleaned = 0.0786917 Jy ! Component: 400 - total flux cleaned = 0.0873818 Jy ! Component: 450 - total flux cleaned = 0.0956558 Jy ! Component: 500 - total flux cleaned = 0.103549 Jy ! Component: 550 - total flux cleaned = 0.111088 Jy ! Component: 600 - total flux cleaned = 0.118296 Jy ! Component: 650 - total flux cleaned = 0.125193 Jy ! Component: 700 - total flux cleaned = 0.131793 Jy ! Component: 750 - total flux cleaned = 0.138126 Jy ! Component: 800 - total flux cleaned = 0.14423 Jy ! Total flux subtracted in 800 components = 0.14423 Jy ! Clean residual min=-0.016271 max=0.017019 Jy/beam ! Clean residual mean=-0.000071 rms=0.008627 Jy/beam ! Combined flux in latest and established models = 0.14423 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 98 model components to the UV plane model. ! The established model now contains 98 components and 0.14423 Jy ! Inverting map and beam ! Estimated beam: bmin=2.731 mas, bmaj=15.09 mas, bpa=-31.71 degrees ! Estimated noise=1.01458 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128895 Jy ! Component: 100 - total flux cleaned = 0.0245542 Jy ! Component: 150 - total flux cleaned = 0.035337 Jy ! Component: 200 - total flux cleaned = 0.0454661 Jy ! Component: 250 - total flux cleaned = 0.0550536 Jy ! Component: 300 - total flux cleaned = 0.064176 Jy ! Component: 350 - total flux cleaned = 0.07288 Jy ! Component: 400 - total flux cleaned = 0.0811933 Jy ! Component: 450 - total flux cleaned = 0.0891383 Jy ! Component: 500 - total flux cleaned = 0.0967358 Jy ! Component: 550 - total flux cleaned = 0.104005 Jy ! Component: 600 - total flux cleaned = 0.110964 Jy ! Component: 650 - total flux cleaned = 0.117631 Jy ! Component: 700 - total flux cleaned = 0.124022 Jy ! Component: 750 - total flux cleaned = 0.130151 Jy ! Component: 800 - total flux cleaned = 0.136029 Jy ! Component: 850 - total flux cleaned = 0.141667 Jy ! Component: 900 - total flux cleaned = 0.147077 Jy ! Component: 950 - total flux cleaned = 0.152268 Jy ! Component: 1000 - total flux cleaned = 0.157248 Jy ! Component: 1050 - total flux cleaned = 0.162027 Jy ! Component: 1100 - total flux cleaned = 0.166613 Jy ! Component: 1150 - total flux cleaned = 0.171015 Jy ! Component: 1200 - total flux cleaned = 0.17457 Jy ! Total flux subtracted in 1200 components = 0.17457 Jy ! Clean residual min=-0.014082 max=0.012913 Jy/beam ! Clean residual mean=-0.000061 rms=0.006927 Jy/beam ! Combined flux in latest and established models = 0.3188 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.149625Jy sigma=6.900731 ! Fit after self-cal, rms=0.149625Jy sigma=6.900731 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.353 mas, bmaj=17.14 mas, bpa=-31.09 degrees ! Estimated noise=1.43818 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151628 Jy ! Component: 100 - total flux cleaned = 0.0275156 Jy ! Component: 150 - total flux cleaned = 0.0389803 Jy ! Component: 200 - total flux cleaned = 0.0498269 Jy ! Component: 250 - total flux cleaned = 0.0601009 Jy ! Component: 300 - total flux cleaned = 0.0698352 Jy ! Component: 350 - total flux cleaned = 0.0790598 Jy ! Component: 400 - total flux cleaned = 0.087806 Jy ! Component: 450 - total flux cleaned = 0.0961159 Jy ! Component: 500 - total flux cleaned = 0.104038 Jy ! Component: 550 - total flux cleaned = 0.111606 Jy ! Component: 600 - total flux cleaned = 0.118844 Jy ! Component: 650 - total flux cleaned = 0.125771 Jy ! Component: 700 - total flux cleaned = 0.132407 Jy ! Component: 750 - total flux cleaned = 0.138768 Jy ! Component: 800 - total flux cleaned = 0.144867 Jy ! Total flux subtracted in 800 components = 0.144867 Jy ! Clean residual min=-0.016469 max=0.016784 Jy/beam ! Clean residual mean=-0.000070 rms=0.008571 Jy/beam ! Combined flux in latest and established models = 0.144867 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 128 model components to the UV plane model. ! The established model now contains 128 components and 0.144867 Jy ! Inverting map and beam ! Estimated beam: bmin=2.731 mas, bmaj=15.09 mas, bpa=-31.71 degrees ! Estimated noise=1.01458 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129433 Jy ! Component: 100 - total flux cleaned = 0.0245564 Jy ! Component: 150 - total flux cleaned = 0.0353762 Jy ! Component: 200 - total flux cleaned = 0.0455746 Jy ! Component: 250 - total flux cleaned = 0.0552091 Jy ! Component: 300 - total flux cleaned = 0.0643402 Jy ! Component: 350 - total flux cleaned = 0.0730277 Jy ! Component: 400 - total flux cleaned = 0.0813144 Jy ! Component: 450 - total flux cleaned = 0.0892284 Jy ! Component: 500 - total flux cleaned = 0.096792 Jy ! Component: 550 - total flux cleaned = 0.104023 Jy ! Component: 600 - total flux cleaned = 0.110939 Jy ! Component: 650 - total flux cleaned = 0.117555 Jy ! Component: 700 - total flux cleaned = 0.123891 Jy ! Component: 750 - total flux cleaned = 0.12996 Jy ! Component: 800 - total flux cleaned = 0.135777 Jy ! Component: 850 - total flux cleaned = 0.141355 Jy ! Component: 900 - total flux cleaned = 0.146704 Jy ! Component: 950 - total flux cleaned = 0.151835 Jy ! Component: 1000 - total flux cleaned = 0.156757 Jy ! Component: 1050 - total flux cleaned = 0.16148 Jy ! Component: 1100 - total flux cleaned = 0.166011 Jy ! Component: 1150 - total flux cleaned = 0.170359 Jy ! Component: 1200 - total flux cleaned = 0.174532 Jy ! Total flux subtracted in 1200 components = 0.174532 Jy ! Clean residual min=-0.013140 max=0.012633 Jy/beam ! Clean residual mean=-0.000058 rms=0.006657 Jy/beam ! Combined flux in latest and established models = 0.319398 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.149625Jy sigma=6.900731 ! Fit after self-cal, rms=0.149625Jy sigma=6.900731 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.353 mas, bmaj=17.14 mas, bpa=-31.09 degrees ! Estimated noise=1.43818 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152085 Jy ! Component: 100 - total flux cleaned = 0.0278424 Jy ! Component: 150 - total flux cleaned = 0.0393616 Jy ! Component: 200 - total flux cleaned = 0.0501737 Jy ! Component: 250 - total flux cleaned = 0.0604038 Jy ! Component: 300 - total flux cleaned = 0.0700895 Jy ! Component: 350 - total flux cleaned = 0.0792652 Jy ! Component: 400 - total flux cleaned = 0.0879648 Jy ! Component: 450 - total flux cleaned = 0.0962403 Jy ! Component: 500 - total flux cleaned = 0.104139 Jy ! Component: 550 - total flux cleaned = 0.11169 Jy ! Component: 600 - total flux cleaned = 0.118918 Jy ! Component: 650 - total flux cleaned = 0.125839 Jy ! Component: 700 - total flux cleaned = 0.132472 Jy ! Component: 750 - total flux cleaned = 0.138834 Jy ! Component: 800 - total flux cleaned = 0.144945 Jy ! Total flux subtracted in 800 components = 0.144945 Jy ! Clean residual min=-0.016154 max=0.016318 Jy/beam ! Clean residual mean=-0.000072 rms=0.008540 Jy/beam ! Combined flux in latest and established models = 0.144945 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 167 model components to the UV plane model. ! The established model now contains 167 components and 0.144945 Jy ! Inverting map and beam ! Estimated beam: bmin=2.731 mas, bmaj=15.09 mas, bpa=-31.71 degrees ! Estimated noise=1.01458 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130373 Jy ! Component: 100 - total flux cleaned = 0.0248395 Jy ! Component: 150 - total flux cleaned = 0.0358832 Jy ! Component: 200 - total flux cleaned = 0.0462899 Jy ! Component: 250 - total flux cleaned = 0.0561176 Jy ! Component: 300 - total flux cleaned = 0.0654163 Jy ! Component: 350 - total flux cleaned = 0.0742369 Jy ! Component: 400 - total flux cleaned = 0.0826167 Jy ! Component: 450 - total flux cleaned = 0.0905861 Jy ! Component: 500 - total flux cleaned = 0.0981752 Jy ! Component: 550 - total flux cleaned = 0.105405 Jy ! Component: 600 - total flux cleaned = 0.112297 Jy ! Component: 650 - total flux cleaned = 0.118869 Jy ! Component: 700 - total flux cleaned = 0.125138 Jy ! Component: 750 - total flux cleaned = 0.131119 Jy ! Component: 800 - total flux cleaned = 0.136826 Jy ! Component: 850 - total flux cleaned = 0.142273 Jy ! Component: 900 - total flux cleaned = 0.147472 Jy ! Component: 950 - total flux cleaned = 0.152436 Jy ! Component: 1000 - total flux cleaned = 0.157177 Jy ! Component: 1050 - total flux cleaned = 0.161705 Jy ! Component: 1100 - total flux cleaned = 0.165686 Jy ! Component: 1150 - total flux cleaned = 0.169494 Jy ! Component: 1200 - total flux cleaned = 0.172979 Jy ! Total flux subtracted in 1200 components = 0.172979 Jy ! Clean residual min=-0.012407 max=0.012101 Jy/beam ! Clean residual mean=-0.000061 rms=0.006161 Jy/beam ! Combined flux in latest and established models = 0.317924 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help proj ! Adding 277 model components to the UV plane model. ! The established model now contains 439 components and 0.317924 Jy ! Using default options string "m3" ! Move the cursor into the plot window and press 'H' for help ! Applying 48 buffered edits. clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.028148Jy sigma=1.234257 ! Fit after self-cal, rms=0.027782Jy sigma=1.241659 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.096 mas, bmaj=38.59 mas, bpa=-28.36 degrees ! Estimated noise=1.97331 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052522 Jy ! Component: 100 - total flux cleaned = 0.00846859 Jy ! Component: 150 - total flux cleaned = 0.00876017 Jy ! Component: 200 - total flux cleaned = 0.00890005 Jy ! Component: 250 - total flux cleaned = 0.00907282 Jy ! Component: 300 - total flux cleaned = 0.00925136 Jy ! Component: 350 - total flux cleaned = 0.0095213 Jy ! Component: 400 - total flux cleaned = 0.00981711 Jy ! Component: 450 - total flux cleaned = 0.00990693 Jy ! Component: 500 - total flux cleaned = 0.00980763 Jy ! Component: 550 - total flux cleaned = 0.00974038 Jy ! Component: 600 - total flux cleaned = 0.0096167 Jy ! Component: 650 - total flux cleaned = 0.0094863 Jy ! Component: 700 - total flux cleaned = 0.00921671 Jy ! Component: 750 - total flux cleaned = 0.00894837 Jy ! Component: 800 - total flux cleaned = 0.00871126 Jy ! Total flux subtracted in 800 components = 0.00871126 Jy ! Clean residual min=-0.003235 max=0.003404 Jy/beam ! Clean residual mean=-0.000000 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.00871125 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 82 model components to the UV plane model. ! The established model now contains 82 components and 0.00871125 Jy ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=35.08 mas, bpa=-28.66 degrees ! Estimated noise=1.37803 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000953397 Jy ! Component: 100 - total flux cleaned = -0.000551635 Jy ! Component: 150 - total flux cleaned = -0.000150934 Jy ! Component: 200 - total flux cleaned = 0.000106269 Jy ! Component: 250 - total flux cleaned = 0.000311148 Jy ! Component: 300 - total flux cleaned = 0.000506239 Jy ! Component: 350 - total flux cleaned = 0.00066251 Jy ! Component: 400 - total flux cleaned = 0.000811958 Jy ! Component: 450 - total flux cleaned = 0.000921542 Jy ! Component: 500 - total flux cleaned = 0.00101899 Jy ! Component: 550 - total flux cleaned = 0.00100457 Jy ! Component: 600 - total flux cleaned = 0.000850168 Jy ! Component: 650 - total flux cleaned = 0.000709296 Jy ! Component: 700 - total flux cleaned = 0.000565285 Jy ! Component: 750 - total flux cleaned = 0.000425516 Jy ! Component: 800 - total flux cleaned = 0.000282145 Jy ! Component: 850 - total flux cleaned = 0.000148653 Jy ! Component: 900 - total flux cleaned = 1.01123e-05 Jy ! Component: 950 - total flux cleaned = -0.000133423 Jy ! Component: 1000 - total flux cleaned = -0.000268387 Jy ! Component: 1050 - total flux cleaned = -0.000401754 Jy ! Component: 1100 - total flux cleaned = -0.000540268 Jy ! Component: 1150 - total flux cleaned = -0.000670857 Jy ! Component: 1200 - total flux cleaned = -0.000806595 Jy ! Total flux subtracted in 1200 components = -0.000806595 Jy ! Clean residual min=-0.002785 max=0.003468 Jy/beam ! Clean residual mean=-0.000001 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.00790465 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027782Jy sigma=1.241659 ! Fit after self-cal, rms=0.027782Jy sigma=1.241659 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.096 mas, bmaj=38.59 mas, bpa=-28.36 degrees ! Estimated noise=1.97331 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052522 Jy ! Component: 100 - total flux cleaned = 0.00843005 Jy ! Component: 150 - total flux cleaned = 0.0103545 Jy ! Component: 200 - total flux cleaned = 0.0116866 Jy ! Component: 250 - total flux cleaned = 0.012836 Jy ! Component: 300 - total flux cleaned = 0.0138583 Jy ! Component: 350 - total flux cleaned = 0.0147728 Jy ! Component: 400 - total flux cleaned = 0.0155929 Jy ! Component: 450 - total flux cleaned = 0.0163298 Jy ! Component: 500 - total flux cleaned = 0.0169927 Jy ! Component: 550 - total flux cleaned = 0.0175897 Jy ! Component: 600 - total flux cleaned = 0.0181281 Jy ! Component: 650 - total flux cleaned = 0.0186145 Jy ! Component: 700 - total flux cleaned = 0.0190551 Jy ! Component: 750 - total flux cleaned = 0.0194549 Jy ! Component: 800 - total flux cleaned = 0.0198179 Jy ! Total flux subtracted in 800 components = 0.0198179 Jy ! Clean residual min=-0.003843 max=0.003690 Jy/beam ! Clean residual mean=0.000000 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.0198178 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 0.0198178 Jy ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=35.08 mas, bpa=-28.66 degrees ! Estimated noise=1.37803 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360881 Jy ! Component: 100 - total flux cleaned = 0.000358806 Jy ! Component: 150 - total flux cleaned = 0.000357284 Jy ! Component: 200 - total flux cleaned = 0.000439692 Jy ! Component: 250 - total flux cleaned = 0.000628385 Jy ! Component: 300 - total flux cleaned = 0.00076782 Jy ! Component: 350 - total flux cleaned = 0.000875684 Jy ! Component: 400 - total flux cleaned = 0.000939944 Jy ! Component: 450 - total flux cleaned = 0.000992504 Jy ! Component: 500 - total flux cleaned = 0.00103042 Jy ! Component: 550 - total flux cleaned = 0.00105088 Jy ! Component: 600 - total flux cleaned = 0.00107063 Jy ! Component: 650 - total flux cleaned = 0.0010851 Jy ! Component: 700 - total flux cleaned = 0.00109913 Jy ! Component: 750 - total flux cleaned = 0.00110382 Jy ! Component: 800 - total flux cleaned = 0.0011083 Jy ! Component: 850 - total flux cleaned = 0.00111748 Jy ! Component: 900 - total flux cleaned = 0.00112215 Jy ! Component: 950 - total flux cleaned = 0.00112657 Jy ! Component: 1000 - total flux cleaned = 0.00113124 Jy ! Component: 1050 - total flux cleaned = 0.00113564 Jy ! Component: 1100 - total flux cleaned = 0.00114442 Jy ! Component: 1150 - total flux cleaned = 0.00114904 Jy ! Component: 1200 - total flux cleaned = 0.00115339 Jy ! Total flux subtracted in 1200 components = 0.00115339 Jy ! Clean residual min=-0.003607 max=0.003645 Jy/beam ! Clean residual mean=0.000000 rms=0.001313 Jy/beam ! Combined flux in latest and established models = 0.0209712 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027782Jy sigma=1.241659 ! Fit after self-cal, rms=0.027782Jy sigma=1.241659 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.096 mas, bmaj=38.59 mas, bpa=-28.36 degrees ! Estimated noise=1.97331 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052522 Jy ! Component: 100 - total flux cleaned = 0.00843005 Jy ! Component: 150 - total flux cleaned = 0.0084359 Jy ! Component: 200 - total flux cleaned = 0.00844044 Jy ! Component: 250 - total flux cleaned = 0.00844405 Jy ! Component: 300 - total flux cleaned = 0.00844709 Jy ! Component: 350 - total flux cleaned = 0.00844961 Jy ! Component: 400 - total flux cleaned = 0.00845172 Jy ! Component: 450 - total flux cleaned = 0.00826946 Jy ! Component: 500 - total flux cleaned = 0.00806833 Jy ! Component: 550 - total flux cleaned = 0.00797846 Jy ! Component: 600 - total flux cleaned = 0.00828298 Jy ! Component: 650 - total flux cleaned = 0.00856124 Jy ! Component: 700 - total flux cleaned = 0.00881556 Jy ! Component: 750 - total flux cleaned = 0.00904833 Jy ! Component: 800 - total flux cleaned = 0.00926157 Jy ! Total flux subtracted in 800 components = 0.00926157 Jy ! Clean residual min=-0.003551 max=0.003750 Jy/beam ! Clean residual mean=0.000000 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.00926155 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.00926155 Jy ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=35.08 mas, bpa=-28.66 degrees ! Estimated noise=1.37803 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268703 Jy ! Component: 100 - total flux cleaned = 0.000577184 Jy ! Component: 150 - total flux cleaned = 0.000779241 Jy ! Component: 200 - total flux cleaned = 0.000674245 Jy ! Component: 250 - total flux cleaned = 0.000610922 Jy ! Component: 300 - total flux cleaned = 0.000673006 Jy ! Component: 350 - total flux cleaned = 0.000795807 Jy ! Component: 400 - total flux cleaned = 0.000914663 Jy ! Component: 450 - total flux cleaned = 0.00102972 Jy ! Component: 500 - total flux cleaned = 0.00114114 Jy ! Component: 550 - total flux cleaned = 0.00124914 Jy ! Component: 600 - total flux cleaned = 0.00135398 Jy ! Component: 650 - total flux cleaned = 0.00144727 Jy ! Component: 700 - total flux cleaned = 0.00153796 Jy ! Component: 750 - total flux cleaned = 0.00161808 Jy ! Component: 800 - total flux cleaned = 0.00169607 Jy ! Component: 850 - total flux cleaned = 0.00177944 Jy ! Component: 900 - total flux cleaned = 0.00186058 Jy ! Component: 950 - total flux cleaned = 0.00193945 Jy ! Component: 1000 - total flux cleaned = 0.00201615 Jy ! Component: 1050 - total flux cleaned = 0.00208422 Jy ! Component: 1100 - total flux cleaned = 0.00213746 Jy ! Component: 1150 - total flux cleaned = 0.00218284 Jy ! Component: 1200 - total flux cleaned = 0.00222719 Jy ! Total flux subtracted in 1200 components = 0.00222719 Jy ! Clean residual min=-0.003569 max=0.003539 Jy/beam ! Clean residual mean=-0.000000 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.0114887 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027782Jy sigma=1.241659 ! Fit after self-cal, rms=0.027782Jy sigma=1.241659 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.096 mas, bmaj=38.59 mas, bpa=-28.36 degrees ! Estimated noise=1.97331 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052522 Jy ! Component: 100 - total flux cleaned = 0.00843005 Jy ! Component: 150 - total flux cleaned = 0.0084359 Jy ! Component: 200 - total flux cleaned = 0.00844044 Jy ! Component: 250 - total flux cleaned = 0.00844363 Jy ! Component: 300 - total flux cleaned = 0.00823095 Jy ! Component: 350 - total flux cleaned = 0.0080291 Jy ! Component: 400 - total flux cleaned = 0.00786611 Jy ! Component: 450 - total flux cleaned = 0.00771025 Jy ! Component: 500 - total flux cleaned = 0.00754871 Jy ! Component: 550 - total flux cleaned = 0.00741776 Jy ! Component: 600 - total flux cleaned = 0.00745945 Jy ! Component: 650 - total flux cleaned = 0.00765679 Jy ! Component: 700 - total flux cleaned = 0.00782922 Jy ! Component: 750 - total flux cleaned = 0.00794297 Jy ! Component: 800 - total flux cleaned = 0.00793447 Jy ! Total flux subtracted in 800 components = 0.00793447 Jy ! Clean residual min=-0.003569 max=0.003628 Jy/beam ! Clean residual mean=0.000000 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.00793447 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.00793447 Jy ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=35.08 mas, bpa=-28.66 degrees ! Estimated noise=1.37803 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.53065e-05 Jy ! Component: 100 - total flux cleaned = 0.000263026 Jy ! Component: 150 - total flux cleaned = 0.000143052 Jy ! Component: 200 - total flux cleaned = 5.83916e-05 Jy ! Component: 250 - total flux cleaned = 7.20805e-07 Jy ! Component: 300 - total flux cleaned = -4.89629e-05 Jy ! Component: 350 - total flux cleaned = -2.57868e-05 Jy ! Component: 400 - total flux cleaned = -1.4624e-05 Jy ! Component: 450 - total flux cleaned = -3.80043e-06 Jy ! Component: 500 - total flux cleaned = 6.61582e-06 Jy ! Component: 550 - total flux cleaned = 6.72063e-06 Jy ! Component: 600 - total flux cleaned = 1.62943e-05 Jy ! Component: 650 - total flux cleaned = 1.65512e-05 Jy ! Component: 700 - total flux cleaned = 2.54392e-05 Jy ! Component: 750 - total flux cleaned = 2.53429e-05 Jy ! Component: 800 - total flux cleaned = 1.70209e-05 Jy ! Component: 850 - total flux cleaned = 1.71665e-05 Jy ! Component: 900 - total flux cleaned = 1.73163e-05 Jy ! Component: 950 - total flux cleaned = 9.87022e-06 Jy ! Component: 1000 - total flux cleaned = 2.62222e-06 Jy ! Component: 1050 - total flux cleaned = -4.45638e-06 Jy ! Component: 1100 - total flux cleaned = -1.12428e-05 Jy ! Component: 1150 - total flux cleaned = -1.11551e-05 Jy ! Component: 1200 - total flux cleaned = -2.44527e-05 Jy ! Total flux subtracted in 1200 components = -2.44527e-05 Jy ! Clean residual min=-0.003375 max=0.003618 Jy/beam ! Clean residual mean=-0.000000 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.00791002 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027782Jy sigma=1.241659 ! Fit after self-cal, rms=0.027782Jy sigma=1.241659 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.096 mas, bmaj=38.59 mas, bpa=-28.36 degrees ! Estimated noise=1.97331 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052522 Jy ! Component: 100 - total flux cleaned = 0.00843005 Jy ! Component: 150 - total flux cleaned = 0.0084359 Jy ! Component: 200 - total flux cleaned = 0.00844044 Jy ! Component: 250 - total flux cleaned = 0.00844363 Jy ! Component: 300 - total flux cleaned = 0.00823095 Jy ! Component: 350 - total flux cleaned = 0.0080291 Jy ! Component: 400 - total flux cleaned = 0.00786611 Jy ! Component: 450 - total flux cleaned = 0.00771025 Jy ! Component: 500 - total flux cleaned = 0.00754871 Jy ! Component: 550 - total flux cleaned = 0.00761724 Jy ! Component: 600 - total flux cleaned = 0.00782179 Jy ! Component: 650 - total flux cleaned = 0.00799962 Jy ! Component: 700 - total flux cleaned = 0.00815408 Jy ! Component: 750 - total flux cleaned = 0.00827708 Jy ! Component: 800 - total flux cleaned = 0.00837232 Jy ! Total flux subtracted in 800 components = 0.00837232 Jy ! Clean residual min=-0.003555 max=0.003553 Jy/beam ! Clean residual mean=0.000000 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.00837232 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.00837232 Jy ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=35.08 mas, bpa=-28.66 degrees ! Estimated noise=1.37803 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000674455 Jy ! Component: 100 - total flux cleaned = -0.000574896 Jy ! Component: 150 - total flux cleaned = -0.000409653 Jy ! Component: 200 - total flux cleaned = -0.000309557 Jy ! Component: 250 - total flux cleaned = -0.00052711 Jy ! Component: 300 - total flux cleaned = -0.000696283 Jy ! Component: 350 - total flux cleaned = -0.000807496 Jy ! Component: 400 - total flux cleaned = -0.000892189 Jy ! Component: 450 - total flux cleaned = -0.000983896 Jy ! Component: 500 - total flux cleaned = -0.00106226 Jy ! Component: 550 - total flux cleaned = -0.00114687 Jy ! Component: 600 - total flux cleaned = -0.00122812 Jy ! Component: 650 - total flux cleaned = -0.00129745 Jy ! Component: 700 - total flux cleaned = -0.00136437 Jy ! Component: 750 - total flux cleaned = -0.00143662 Jy ! Component: 800 - total flux cleaned = -0.00149828 Jy ! Component: 850 - total flux cleaned = -0.00155023 Jy ! Component: 900 - total flux cleaned = -0.00160033 Jy ! Component: 950 - total flux cleaned = -0.00164167 Jy ! Component: 1000 - total flux cleaned = -0.00168162 Jy ! Component: 1050 - total flux cleaned = -0.00172646 Jy ! Component: 1100 - total flux cleaned = -0.00175723 Jy ! Component: 1150 - total flux cleaned = -0.00183485 Jy ! Component: 1200 - total flux cleaned = -0.00192241 Jy ! Total flux subtracted in 1200 components = -0.00192241 Jy ! Clean residual min=-0.003322 max=0.003553 Jy/beam ! Clean residual mean=-0.000001 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.00644991 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027782Jy sigma=1.241659 ! Fit after self-cal, rms=0.027782Jy sigma=1.241659 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.096 mas, bmaj=38.59 mas, bpa=-28.36 degrees ! Estimated noise=1.97331 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052522 Jy ! Component: 100 - total flux cleaned = 0.00843005 Jy ! Component: 150 - total flux cleaned = 0.0084359 Jy ! Component: 200 - total flux cleaned = 0.00844044 Jy ! Component: 250 - total flux cleaned = 0.00844363 Jy ! Component: 300 - total flux cleaned = 0.00823095 Jy ! Component: 350 - total flux cleaned = 0.0080291 Jy ! Component: 400 - total flux cleaned = 0.00786611 Jy ! Component: 450 - total flux cleaned = 0.00740735 Jy ! Component: 500 - total flux cleaned = 0.00705074 Jy ! Component: 550 - total flux cleaned = 0.00689624 Jy ! Component: 600 - total flux cleaned = 0.00677 Jy ! Component: 650 - total flux cleaned = 0.00666827 Jy ! Component: 700 - total flux cleaned = 0.00655675 Jy ! Component: 750 - total flux cleaned = 0.00645286 Jy ! Component: 800 - total flux cleaned = 0.00635547 Jy ! Total flux subtracted in 800 components = 0.00635547 Jy ! Clean residual min=-0.003556 max=0.003410 Jy/beam ! Clean residual mean=-0.000000 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.00635547 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.00635547 Jy ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=35.08 mas, bpa=-28.66 degrees ! Estimated noise=1.37803 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00093011 Jy ! Component: 100 - total flux cleaned = -0.00110463 Jy ! Component: 150 - total flux cleaned = -0.00117196 Jy ! Component: 200 - total flux cleaned = -0.00117063 Jy ! Component: 250 - total flux cleaned = -0.00116961 Jy ! Component: 300 - total flux cleaned = -0.0012575 Jy ! Component: 350 - total flux cleaned = -0.00139309 Jy ! Component: 400 - total flux cleaned = -0.00152029 Jy ! Component: 450 - total flux cleaned = -0.00163959 Jy ! Component: 500 - total flux cleaned = -0.00175173 Jy ! Component: 550 - total flux cleaned = -0.00186498 Jy ! Component: 600 - total flux cleaned = -0.00196377 Jy ! Component: 650 - total flux cleaned = -0.00204276 Jy ! Component: 700 - total flux cleaned = -0.00207669 Jy ! Component: 750 - total flux cleaned = -0.00210272 Jy ! Component: 800 - total flux cleaned = -0.00212157 Jy ! Component: 850 - total flux cleaned = -0.0021398 Jy ! Component: 900 - total flux cleaned = -0.00215755 Jy ! Component: 950 - total flux cleaned = -0.00218036 Jy ! Component: 1000 - total flux cleaned = -0.00222427 Jy ! Component: 1050 - total flux cleaned = -0.00228924 Jy ! Component: 1100 - total flux cleaned = -0.00236381 Jy ! Component: 1150 - total flux cleaned = -0.00243714 Jy ! Component: 1200 - total flux cleaned = -0.00249901 Jy ! Total flux subtracted in 1200 components = -0.00249901 Jy ! Clean residual min=-0.003160 max=0.003443 Jy/beam ! Clean residual mean=-0.000001 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.00385647 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help clrmod true,true ! clrmod: Cleared the established and tentative models. selfcal ! Performing phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027782Jy sigma=1.241659 ! Fit after self-cal, rms=0.027782Jy sigma=1.241659 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean 800, 0.01 ! Inverting map and beam ! Estimated beam: bmin=2.096 mas, bmaj=38.59 mas, bpa=-28.36 degrees ! Estimated noise=1.97331 mJy/beam. ! clean: niter=800 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052522 Jy ! Component: 100 - total flux cleaned = 0.00843005 Jy ! Component: 150 - total flux cleaned = 0.0103545 Jy ! Component: 200 - total flux cleaned = 0.0116919 Jy ! Component: 250 - total flux cleaned = 0.0128454 Jy ! Component: 300 - total flux cleaned = 0.0138685 Jy ! Component: 350 - total flux cleaned = 0.0147813 Jy ! Component: 400 - total flux cleaned = 0.0155969 Jy ! Component: 450 - total flux cleaned = 0.0163281 Jy ! Component: 500 - total flux cleaned = 0.016986 Jy ! Component: 550 - total flux cleaned = 0.0175793 Jy ! Component: 600 - total flux cleaned = 0.0181148 Jy ! Component: 650 - total flux cleaned = 0.0185987 Jy ! Component: 700 - total flux cleaned = 0.0190361 Jy ! Component: 750 - total flux cleaned = 0.0194322 Jy ! Component: 800 - total flux cleaned = 0.0197911 Jy ! Total flux subtracted in 800 components = 0.0197911 Jy ! Clean residual min=-0.003844 max=0.003683 Jy/beam ! Clean residual mean=0.000001 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.0197911 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. clean 1200, 0.01 ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.0197911 Jy ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=35.08 mas, bpa=-28.66 degrees ! Estimated noise=1.37803 mJy/beam. ! clean: niter=1200 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000747182 Jy ! Component: 100 - total flux cleaned = 0.000956118 Jy ! Component: 150 - total flux cleaned = 0.000956683 Jy ! Component: 200 - total flux cleaned = 0.000956941 Jy ! Component: 250 - total flux cleaned = 0.00105352 Jy ! Component: 300 - total flux cleaned = 0.00113354 Jy ! Component: 350 - total flux cleaned = 0.00122126 Jy ! Component: 400 - total flux cleaned = 0.00130302 Jy ! Component: 450 - total flux cleaned = 0.00136042 Jy ! Component: 500 - total flux cleaned = 0.00140288 Jy ! Component: 550 - total flux cleaned = 0.00143188 Jy ! Component: 600 - total flux cleaned = 0.0014545 Jy ! Component: 650 - total flux cleaned = 0.00146546 Jy ! Component: 700 - total flux cleaned = 0.00148172 Jy ! Component: 750 - total flux cleaned = 0.00149257 Jy ! Component: 800 - total flux cleaned = 0.00150319 Jy ! Component: 850 - total flux cleaned = 0.00151368 Jy ! Component: 900 - total flux cleaned = 0.00152409 Jy ! Component: 950 - total flux cleaned = 0.00153434 Jy ! Component: 1000 - total flux cleaned = 0.00153943 Jy ! Component: 1050 - total flux cleaned = 0.00155483 Jy ! Component: 1100 - total flux cleaned = 0.00156504 Jy ! Component: 1150 - total flux cleaned = 0.00156995 Jy ! Component: 1200 - total flux cleaned = 0.0015802 Jy ! Total flux subtracted in 1200 components = 0.0015802 Jy ! Clean residual min=-0.003715 max=0.003671 Jy/beam ! Clean residual mean=0.000000 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.0213713 Jy mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. mapl map,true ! ! Move the cursor into the plot window and press 'H' for help levs=1.563,3.125,6.25,12.5,25.0,50.0 mapcol color ! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5. mapl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.267 x 35.08 at -28.66 degrees (North through East) ! Clean map min=-0.0036873 max=0.014492 Jy/beam ! Clean map min=-0.0036873 max=0.015414 Jy/beam ! ! Move the cursor into the plot window and press 'H' for help mapcol grey ! Mapplot colormap: grey, contrast: 1 brightness: 0.5. uvpl ! Using default options string "" ! Move the cursor into the plot window and press 'H' for help save J1156+312A_C ! Writing UV FITS file: J1156+312A_C.uvf ! Writing 69 model components to file: J1156+312A_C.mod ! wwins: Wrote 1 windows to J1156+312A_C.win ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.0213713 Jy ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.267 x 35.08 at -28.66 degrees (North through East) ! Clean map min=-0.0036889 max=0.015414 Jy/beam ! Writing clean map to FITS file: J1156+312A_C.fits ! Writing difmap environment to: J1156+312A_C.par quit ! Quitting program ! Log file difmap.log_66 closed on Sat Feb 8 01:25:00 2014