! Started logfile: /d2/scr/pima/bp171a4_uvs/J1156+312A_C_uvs.log on Wed Jan 29 04:24:22 2014
obs /d2/scr/pima/bp171a4_uvs/J1156+312A_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171a4_uvs/J1156+312A_C_uva.fits
! AN table 1: 3 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.5 visibilities/baseline/integration-bin.
! Found source: J1156+312A
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 336 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171a4_uvs/J1156+312A_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007705Jy  sigma=47.759880
! Fit after  self-cal, rms=0.937776Jy  sigma=44.078826
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.677 mas, bmaj=9.096 mas, bpa=-28.42 degrees
! Estimated noise=1.07145 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0313776 Jy
! Component: 100  -  total flux cleaned = 0.0298911 Jy
! Total flux subtracted in 100 components = 0.0298911 Jy
! Clean residual min=-0.018908 max=0.018649 Jy/beam
! Clean residual mean=0.000129 rms=0.008295 Jy/beam
! Combined flux in latest and established models = 0.0298911 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 50 components and 0.0298911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.104860Jy  sigma=5.306254
! Fit after  self-cal, rms=0.103900Jy  sigma=5.263720
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.985 mas, bmaj=9.344 mas, bpa=-26.74 degrees
! Estimated noise=0.878177 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00618952 Jy
! Component: 100  -  total flux cleaned = -0.0110752 Jy
! Component: 150  -  total flux cleaned = -0.00495859 Jy
! Component: 200  -  total flux cleaned = -0.00376353 Jy
! Total flux subtracted in 200 components = -0.00376353 Jy
! Clean residual min=-0.016480 max=0.016620 Jy/beam
! Clean residual mean=0.000163 rms=0.011235 Jy/beam
! Combined flux in latest and established models = 0.0261276 Jy
! Performing phase self-cal
! Adding 170 model components to the UV plane model.
! The established model now contains 217 components and 0.0261276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060910Jy  sigma=3.014843
! Fit after  self-cal, rms=0.060654Jy  sigma=3.009013
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.985 x 9.344 at -26.74 degrees (North through East)
! Clean map  min=-0.028604  max=0.052817 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.060654Jy  sigma=3.009013
! Fit after  self-cal, rms=0.060654Jy  sigma=3.009013
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.985 mas, bmaj=9.344 mas, bpa=-26.74 degrees
! Estimated noise=0.878177 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118029 Jy
! Component: 100  -  total flux cleaned = 0.0190188 Jy
! Component: 150  -  total flux cleaned = 0.0190177 Jy
! Component: 200  -  total flux cleaned = 0.0177724 Jy
! Total flux subtracted in 200 components = 0.0177724 Jy
! Clean residual min=-0.009813 max=0.009843 Jy/beam
! Clean residual mean=0.000090 rms=0.006643 Jy/beam
! Combined flux in latest and established models = 0.0439 Jy
! Performing phase self-cal
! Adding 188 model components to the UV plane model.
! The established model now contains 403 components and 0.0439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043812Jy  sigma=2.096142
! Fit after  self-cal, rms=0.043774Jy  sigma=2.095267
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043774Jy  sigma=2.095267
! Fit after  self-cal, rms=0.043774Jy  sigma=2.095267
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.985 mas, bmaj=9.344 mas, bpa=-26.74 degrees
! Estimated noise=0.878177 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.80549e-05 Jy
! Component: 100  -  total flux cleaned = -7.51062e-05 Jy
! Component: 150  -  total flux cleaned = -0.00131423 Jy
! Component: 200  -  total flux cleaned = -0.00202261 Jy
! Total flux subtracted in 200 components = -0.00202261 Jy
! Clean residual min=-0.005960 max=0.005962 Jy/beam
! Clean residual mean=0.000049 rms=0.003956 Jy/beam
! Combined flux in latest and established models = 0.0418774 Jy
selfcal
! Performing phase self-cal
! Adding 176 model components to the UV plane model.
! The established model now contains 566 components and 0.0418774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035847Jy  sigma=1.675407
! Fit after  self-cal, rms=0.035821Jy  sigma=1.674475
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000318707 Jy
! Component: 100  -  total flux cleaned = -0.00223183 Jy
! Component: 150  -  total flux cleaned = -0.00398174 Jy
! Component: 200  -  total flux cleaned = -0.00309441 Jy
! Total flux subtracted in 200 components = -0.00309441 Jy
! Clean residual min=-0.003601 max=0.003623 Jy/beam
! Clean residual mean=0.000023 rms=0.002337 Jy/beam
! Combined flux in latest and established models = 0.038783 Jy
! Performing phase self-cal
! Adding 146 model components to the UV plane model.
! The established model now contains 700 components and 0.038783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032370Jy  sigma=1.506707
! Fit after  self-cal, rms=0.032341Jy  sigma=1.506015
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032341Jy  sigma=1.506015
! Fit after  self-cal, rms=0.032057Jy  sigma=1.483521
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.986 mas, bmaj=9.358 mas, bpa=-26.72 degrees
! Estimated noise=0.888909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000855274 Jy
! Component: 100  -  total flux cleaned = -0.00190107 Jy
! Component: 150  -  total flux cleaned = -0.00245665 Jy
! Component: 200  -  total flux cleaned = -0.00281744 Jy
! Total flux subtracted in 200 components = -0.00281744 Jy
! Clean residual min=-0.001886 max=0.001895 Jy/beam
! Clean residual mean=0.000006 rms=0.001172 Jy/beam
! Combined flux in latest and established models = 0.0359655 Jy
selfcal
! Performing phase self-cal
! Adding 138 model components to the UV plane model.
! The established model now contains 832 components and 0.0359655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030803Jy  sigma=1.437510
! Fit after  self-cal, rms=0.030793Jy  sigma=1.437277
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000126182 Jy
! Component: 100  -  total flux cleaned = -0.000817679 Jy
! Component: 150  -  total flux cleaned = -0.00108907 Jy
! Component: 200  -  total flux cleaned = -0.00150142 Jy
! Total flux subtracted in 200 components = -0.00150142 Jy
! Clean residual min=-0.001305 max=0.001297 Jy/beam
! Clean residual mean=0.000000 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.0344641 Jy
! Performing phase self-cal
! Adding 111 model components to the UV plane model.
! The established model now contains 940 components and 0.0344641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030219Jy  sigma=1.419059
! Fit after  self-cal, rms=0.030200Jy  sigma=1.418667
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030200Jy  sigma=1.418667
! Fit after  self-cal, rms=0.030127Jy  sigma=1.409279
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.767 mas, bmaj=8.946 mas, bpa=-25.94 degrees
! Estimated noise=0.942665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000101276 Jy
! Component: 100  -  total flux cleaned = -0.000955311 Jy
! Component: 150  -  total flux cleaned = -0.00138241 Jy
! Component: 200  -  total flux cleaned = -0.00156411 Jy
! Total flux subtracted in 200 components = -0.00156411 Jy
! Clean residual min=-0.001472 max=0.001472 Jy/beam
! Clean residual mean=-0.000001 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 0.0329 Jy
selfcal
! Performing phase self-cal
! Adding 118 model components to the UV plane model.
! The established model now contains 1044 components and 0.0329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029503Jy  sigma=1.392368
! Fit after  self-cal, rms=0.029489Jy  sigma=1.392056
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000673375 Jy
! Component: 100  -  total flux cleaned = 0.000839613 Jy
! Component: 150  -  total flux cleaned = 0.000911629 Jy
! Component: 200  -  total flux cleaned = 0.00111079 Jy
! Total flux subtracted in 200 components = 0.00111079 Jy
! Clean residual min=-0.001077 max=0.001086 Jy/beam
! Clean residual mean=-0.000005 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.0340108 Jy
! Performing phase self-cal
! Adding 91 model components to the UV plane model.
! The established model now contains 1133 components and 0.0340108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029158Jy  sigma=1.381322
! Fit after  self-cal, rms=0.029150Jy  sigma=1.381000
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.994 mas, bmaj=9.329 mas, bpa=-26.72 degrees
! Estimated noise=0.896816 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.994 x 9.329 at -26.72 degrees (North through East)
! Clean map  min=-0.013309  max=0.040297 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.689 mas, bmaj=9.065 mas, bpa=-28.44 degrees
! Estimated noise=1.09417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0295333 Jy
! Component: 100  -  total flux cleaned = 0.0296144 Jy
! Component: 150  -  total flux cleaned = 0.02873 Jy
! Component: 200  -  total flux cleaned = 0.0286496 Jy
! Total flux subtracted in 200 components = 0.0286496 Jy
! Clean residual min=-0.012950 max=0.012972 Jy/beam
! Clean residual mean=0.000103 rms=0.006643 Jy/beam
! Combined flux in latest and established models = 0.0286497 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 106 model components to the UV plane model.
! The established model now contains 106 components and 0.0286497 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.994 mas, bmaj=9.329 mas, bpa=-26.72 degrees
! Estimated noise=0.896816 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0132772 Jy
! Component: 100  -  total flux cleaned = -0.0130216 Jy
! Component: 150  -  total flux cleaned = -0.0107431 Jy
! Component: 200  -  total flux cleaned = -0.00784517 Jy
! Total flux subtracted in 200 components = -0.00784517 Jy
! Clean residual min=-0.014947 max=0.014946 Jy/beam
! Clean residual mean=0.000145 rms=0.009996 Jy/beam
! Combined flux in latest and established models = 0.0208045 Jy
! Adding 168 model components to the UV plane model.
! The established model now contains 273 components and 0.0208045 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.767 mas, bmaj=8.946 mas, bpa=-25.94 degrees
! Estimated noise=0.942665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0171082 Jy
! Component: 100  -  total flux cleaned = 0.0294235 Jy
! Component: 150  -  total flux cleaned = 0.0344777 Jy
! Component: 200  -  total flux cleaned = 0.0297962 Jy
! Total flux subtracted in 200 components = 0.0297962 Jy
! Clean residual min=-0.010354 max=0.010379 Jy/beam
! Clean residual mean=0.000087 rms=0.006730 Jy/beam
! Combined flux in latest and established models = 0.0506007 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00988716 Jy
! Component: 100  -  total flux cleaned = -0.0181541 Jy
! Component: 150  -  total flux cleaned = -0.0265116 Jy
! Component: 200  -  total flux cleaned = -0.0323898 Jy
! Total flux subtracted in 200 components = -0.0323898 Jy
! Clean residual min=-0.006683 max=0.006609 Jy/beam
! Clean residual mean=0.000042 rms=0.003216 Jy/beam
! Combined flux in latest and established models = 0.0182109 Jy
! Adding 255 model components to the UV plane model.
! The established model now contains 525 components and 0.0182109 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.994 mas, bmaj=9.329 mas, bpa=-26.72 degrees
! Estimated noise=0.896816 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00405142 Jy
! Component: 100  -  total flux cleaned = -0.00473504 Jy
! Component: 150  -  total flux cleaned = -0.00500983 Jy
! Component: 200  -  total flux cleaned = -0.00525516 Jy
! Total flux subtracted in 200 components = -0.00525516 Jy
! Clean residual min=-0.001809 max=0.001823 Jy/beam
! Clean residual mean=-0.000003 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.0129557 Jy
selfcal
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 606 components and 0.0129557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030641Jy  sigma=1.445041
! Fit after  self-cal, rms=0.030580Jy  sigma=1.441984
wmodel /d2/scr/pima/bp171a4_uvs/J1156+312A_C_map.mod
! Writing 606 model components to file: /d2/scr/pima/bp171a4_uvs/J1156+312A_C_map.mod
wobs /d2/scr/pima/bp171a4_uvs/J1156+312A_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171a4_uvs/J1156+312A_C_uvs.fits
wwins /d2/scr/pima/bp171a4_uvs/J1156+312A_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp171a4_uvs/J1156+312A_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.994 x 9.329 at -26.72 degrees (North through East)
! Clean map  min=-0.012897  max=0.034676 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171a4_uvs/J1156+312A_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0346764 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000827917 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -7.16266 7.16266 14.3253 28.6507 57.3013
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0024 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.034 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  41.883 
quit
! Quitting program
! Log file /d2/scr/pima/bp171a4_uvs/J1156+312A_C_uvs.log closed on Wed Jan 29 04:24:28 2014