! Started logfile: /d2/scr/pima/bp171a4_uvs/J1134-2609_C_uvs.log on Wed Jan 29 04:22:15 2014
obs /d2/scr/pima/bp171a4_uvs/J1134-2609_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171a4_uvs/J1134-2609_C_uva.fits
! AN table 1: 3 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.466667 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1134-2609
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 168 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171a4_uvs/J1134-2609_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999668Jy  sigma=41.553609
! Fit after  self-cal, rms=0.969252Jy  sigma=43.502047
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.74 mas, bmaj=22.75 mas, bpa=0.5742 degrees
! Estimated noise=1.88267 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155764 Jy
! Component: 100  -  total flux cleaned = 0.0117508 Jy
! Total flux subtracted in 100 components = 0.0117508 Jy
! Clean residual min=-0.005960 max=0.005892 Jy/beam
! Clean residual mean=-0.000076 rms=0.003480 Jy/beam
! Combined flux in latest and established models = 0.0117508 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.0117508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024252Jy  sigma=0.999402
! Fit after  self-cal, rms=0.023435Jy  sigma=0.970465
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.38 mas, bmaj=24.02 mas, bpa=-0.8568 degrees
! Estimated noise=1.46854 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00661878 Jy
! Component: 100  -  total flux cleaned = -0.0113968 Jy
! Component: 150  -  total flux cleaned = -0.011385 Jy
! Component: 200  -  total flux cleaned = -0.010005 Jy
! Total flux subtracted in 200 components = -0.010005 Jy
! Clean residual min=-0.004519 max=0.004503 Jy/beam
! Clean residual mean=-0.000056 rms=0.002406 Jy/beam
! Combined flux in latest and established models = 0.00174578 Jy
! Performing phase self-cal
! Adding 107 model components to the UV plane model.
! The established model now contains 156 components and 0.00174578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013576Jy  sigma=0.550677
! Fit after  self-cal, rms=0.013240Jy  sigma=0.538490
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.38 x 24.02 at -0.8568 degrees (North through East)
! Clean map  min=-0.010194  max=0.015719 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.96     KP        0.91     LA        1.01     
!   OV        1.00*    PT        0.85     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.013240Jy  sigma=0.538490
! Fit after  self-cal, rms=0.012994Jy  sigma=0.530877
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.37 mas, bmaj=24.08 mas, bpa=-0.9212 degrees
! Estimated noise=1.43815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00118484 Jy
! Component: 100  -  total flux cleaned = -0.00122181 Jy
! Component: 150  -  total flux cleaned = -0.00103247 Jy
! Component: 200  -  total flux cleaned = -0.00111503 Jy
! Total flux subtracted in 200 components = -0.00111503 Jy
! Clean residual min=-0.001416 max=0.001437 Jy/beam
! Clean residual mean=-0.000025 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.000630756 Jy
! Performing phase self-cal
! Adding 106 model components to the UV plane model.
! The established model now contains 262 components and 0.000630756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010892Jy  sigma=0.444193
! Fit after  self-cal, rms=0.010795Jy  sigma=0.440430
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010795Jy  sigma=0.440430
! Fit after  self-cal, rms=0.009792Jy  sigma=0.408859
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.41 mas, bmaj=23.99 mas, bpa=-0.1442 degrees
! Estimated noise=1.41739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.32072e-05 Jy
! Component: 100  -  total flux cleaned = 0.000211658 Jy
! Component: 150  -  total flux cleaned = 0.000301463 Jy
! Component: 200  -  total flux cleaned = 0.000340077 Jy
! Total flux subtracted in 200 components = 0.000340077 Jy
! Clean residual min=-0.000320 max=0.000319 Jy/beam
! Clean residual mean=-0.000000 rms=0.000108 Jy/beam
! Combined flux in latest and established models = 0.000970833 Jy
selfcal
! Performing phase self-cal
! Adding 101 model components to the UV plane model.
! The established model now contains 359 components and 0.000970834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009638Jy  sigma=0.402071
! Fit after  self-cal, rms=0.009637Jy  sigma=0.401960
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137733 Jy
! Component: 100  -  total flux cleaned = 7.87341e-05 Jy
! Component: 150  -  total flux cleaned = 1.01393e-05 Jy
! Component: 200  -  total flux cleaned = -9.52345e-05 Jy
! Total flux subtracted in 200 components = -9.52345e-05 Jy
! Clean residual min=-0.000126 max=0.000122 Jy/beam
! Clean residual mean=0.000000 rms=0.000048 Jy/beam
! Combined flux in latest and established models = 0.000875599 Jy
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 431 components and 0.000875599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009621Jy  sigma=0.401548
! Fit after  self-cal, rms=0.009617Jy  sigma=0.401483
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009617Jy  sigma=0.401483
! Fit after  self-cal, rms=0.009566Jy  sigma=0.398452
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.43 mas, bmaj=23.86 mas, bpa=0.7076 degrees
! Estimated noise=1.4159 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000312304 Jy
! Component: 100  -  total flux cleaned = 0.000361536 Jy
! Component: 150  -  total flux cleaned = 0.000211032 Jy
! Component: 200  -  total flux cleaned = 7.18148e-05 Jy
! Total flux subtracted in 200 components = 7.18148e-05 Jy
! Clean residual min=-0.000155 max=0.000152 Jy/beam
! Clean residual mean=-0.000000 rms=0.000055 Jy/beam
! Combined flux in latest and established models = 0.000947414 Jy
selfcal
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 491 components and 0.000947414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009535Jy  sigma=0.397049
! Fit after  self-cal, rms=0.009534Jy  sigma=0.397020
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000137391 Jy
! Component: 100  -  total flux cleaned = -0.000258405 Jy
! Component: 150  -  total flux cleaned = -0.00037038 Jy
! Component: 200  -  total flux cleaned = -0.000469087 Jy
! Total flux subtracted in 200 components = -0.000469087 Jy
! Clean residual min=-0.000088 max=0.000086 Jy/beam
! Clean residual mean=0.000000 rms=0.000033 Jy/beam
! Combined flux in latest and established models = 0.000478327 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 534 components and 0.000478327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009529Jy  sigma=0.396608
! Fit after  self-cal, rms=0.009528Jy  sigma=0.396588
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009528Jy  sigma=0.396588
! Fit after  self-cal, rms=0.009515Jy  sigma=0.395999
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.5 mas, bmaj=23.86 mas, bpa=1.315 degrees
! Estimated noise=1.4134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105748 Jy
! Component: 100  -  total flux cleaned = -5.39544e-06 Jy
! Component: 150  -  total flux cleaned = -8.11936e-05 Jy
! Component: 200  -  total flux cleaned = -0.000168827 Jy
! Total flux subtracted in 200 components = -0.000168827 Jy
! Clean residual min=-0.000114 max=0.000112 Jy/beam
! Clean residual mean=-0.000000 rms=0.000037 Jy/beam
! Combined flux in latest and established models = 0.000309499 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 601 components and 0.000309499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009503Jy  sigma=0.395568
! Fit after  self-cal, rms=0.009502Jy  sigma=0.395531
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117467 Jy
! Component: 100  -  total flux cleaned = -0.000229779 Jy
! Component: 150  -  total flux cleaned = -0.000320058 Jy
! Component: 200  -  total flux cleaned = -0.000400977 Jy
! Total flux subtracted in 200 components = -0.000400977 Jy
! Clean residual min=-0.000073 max=0.000073 Jy/beam
! Clean residual mean=0.000001 rms=0.000031 Jy/beam
! Combined flux in latest and established models = -9.1477e-05 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 649 components and -9.14771e-05 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009501Jy  sigma=0.395154
! Fit after  self-cal, rms=0.009500Jy  sigma=0.395134
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=14.43 mas, bmaj=23.81 mas, bpa=1.049 degrees
! Estimated noise=1.41298 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.43 x 23.81 at 1.049 degrees (North through East)
! Clean map  min=-0.0094562  max=0.012558 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.82 mas, bmaj=22.57 mas, bpa=2.175 degrees
! Estimated noise=1.81824 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103383 Jy
! Component: 100  -  total flux cleaned = 0.00819192 Jy
! Component: 150  -  total flux cleaned = 0.00255593 Jy
! Component: 200  -  total flux cleaned = -0.000463387 Jy
! Total flux subtracted in 200 components = -0.000463387 Jy
! Clean residual min=-0.004430 max=0.004371 Jy/beam
! Clean residual mean=-0.000055 rms=0.002413 Jy/beam
! Combined flux in latest and established models = -0.000463387 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 115 model components to the UV plane model.
! The established model now contains 115 components and -0.000463387 Jy
! Inverting map and beam 
! Estimated beam: bmin=14.43 mas, bmaj=23.81 mas, bpa=1.049 degrees
! Estimated noise=1.41298 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000127072 Jy
! Component: 100  -  total flux cleaned = 0.000820119 Jy
! Component: 150  -  total flux cleaned = 0.00081218 Jy
! Component: 200  -  total flux cleaned = 0.000805042 Jy
! Total flux subtracted in 200 components = 0.000805042 Jy
! Clean residual min=-0.003580 max=0.003617 Jy/beam
! Clean residual mean=-0.000043 rms=0.001669 Jy/beam
! Combined flux in latest and established models = 0.000341654 Jy
! Adding 109 model components to the UV plane model.
! The established model now contains 224 components and 0.000341654 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.5 mas, bmaj=23.86 mas, bpa=1.315 degrees
! Estimated noise=1.4134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000721539 Jy
! Component: 100  -  total flux cleaned = 0.000942003 Jy
! Component: 150  -  total flux cleaned = 0.00123227 Jy
! Component: 200  -  total flux cleaned = 0.00159405 Jy
! Total flux subtracted in 200 components = 0.00159405 Jy
! Clean residual min=-0.001458 max=0.001483 Jy/beam
! Clean residual mean=-0.000002 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.0019357 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000807519 Jy
! Component: 100  -  total flux cleaned = 0.000912087 Jy
! Component: 150  -  total flux cleaned = 0.00114341 Jy
! Component: 200  -  total flux cleaned = 0.001281 Jy
! Total flux subtracted in 200 components = 0.001281 Jy
! Clean residual min=-0.002327 max=0.002337 Jy/beam
! Clean residual mean=0.000011 rms=0.000920 Jy/beam
! Combined flux in latest and established models = 0.0032167 Jy
! Adding 118 model components to the UV plane model.
! The established model now contains 339 components and 0.0032167 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=14.43 mas, bmaj=23.81 mas, bpa=1.049 degrees
! Estimated noise=1.41298 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0001515 Jy
! Component: 100  -  total flux cleaned = -0.000335927 Jy
! Component: 150  -  total flux cleaned = 0.000143239 Jy
! Component: 200  -  total flux cleaned = 0.000465983 Jy
! Total flux subtracted in 200 components = 0.000465983 Jy
! Clean residual min=-0.001422 max=0.001458 Jy/beam
! Clean residual mean=-0.000011 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.00368268 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 371 components and 0.00368268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009782Jy  sigma=0.407729
! Fit after  self-cal, rms=0.009671Jy  sigma=0.401700
wmodel /d2/scr/pima/bp171a4_uvs/J1134-2609_C_map.mod
! Writing 371 model components to file: /d2/scr/pima/bp171a4_uvs/J1134-2609_C_map.mod
wobs /d2/scr/pima/bp171a4_uvs/J1134-2609_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171a4_uvs/J1134-2609_C_uvs.fits
wwins /d2/scr/pima/bp171a4_uvs/J1134-2609_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp171a4_uvs/J1134-2609_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.43 x 23.81 at 1.049 degrees (North through East)
! Clean map  min=-0.0099988  max=0.012106 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171a4_uvs/J1134-2609_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.012106 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00049494 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -12.2652 12.2652 24.5304 49.0607 98.1214
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.012 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  24.459 
quit
! Quitting program
! Log file /d2/scr/pima/bp171a4_uvs/J1134-2609_C_uvs.log closed on Wed Jan 29 04:22:22 2014