! Started logfile: /d2/scr/pima/bp171a4_uvs/J1052+0806_C_uvs.log on Wed Jan 29 04:19:06 2014
obs /d2/scr/pima/bp171a4_uvs/J1052+0806_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171a4_uvs/J1052+0806_C_uva.fits
! AN table 1: 3 integrations on 1 of 1 possible baselines.
! AN table 2: 3 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.545455 visibilities/baseline/integration-bin.
! Found source: J1052+0806
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 144 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171a4_uvs/J1052+0806_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000049Jy  sigma=44.259814
! Fit after  self-cal, rms=0.983798Jy  sigma=43.162208
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.624 mas, bmaj=27.91 mas, bpa=22.65 degrees
! Estimated noise=2.90597 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011569 Jy
! Component: 100  -  total flux cleaned = 0.0129705 Jy
! Total flux subtracted in 100 components = 0.0129705 Jy
! Clean residual min=-0.002756 max=0.002778 Jy/beam
! Clean residual mean=0.000013 rms=0.001218 Jy/beam
! Combined flux in latest and established models = 0.0129705 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.0129705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015249Jy  sigma=0.597437
! Fit after  self-cal, rms=0.012470Jy  sigma=0.461315
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.798 mas, bmaj=27.05 mas, bpa=26.16 degrees
! Estimated noise=1.69736 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000126542 Jy
! Component: 100  -  total flux cleaned = 0.000904882 Jy
! Component: 150  -  total flux cleaned = 0.00191183 Jy
! Component: 200  -  total flux cleaned = 0.00292874 Jy
! Total flux subtracted in 200 components = 0.00292874 Jy
! Clean residual min=-0.001337 max=0.001351 Jy/beam
! Clean residual mean=0.000005 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.0158993 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 101 components and 0.0158993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011539Jy  sigma=0.424013
! Fit after  self-cal, rms=0.011413Jy  sigma=0.420678
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.798 x 27.05 at 26.16 degrees (North through East)
! Clean map  min=-0.0017632  max=0.0098745 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.14     KP        0.99     LA        1.00*    OV        0.88     
!   PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.16     KP        1.04     LA        1.00*    OV        1.04     
!   PT        1.18     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.96     KP        0.87     LA        1.00*    OV        1.14     
!   PT        1.20     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.04     KP        0.87     LA        1.00*    OV        0.85     
!   PT        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     KP        0.99     LA        1.00*    OV        0.97     
!   PT        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.011413Jy  sigma=0.420678
! Fit after  self-cal, rms=0.011189Jy  sigma=0.406432
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.764 mas, bmaj=26.74 mas, bpa=26.26 degrees
! Estimated noise=1.70571 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000784581 Jy
! Component: 100  -  total flux cleaned = 0.000744533 Jy
! Component: 150  -  total flux cleaned = 0.000539017 Jy
! Component: 200  -  total flux cleaned = 0.000347383 Jy
! Total flux subtracted in 200 components = 0.000347383 Jy
! Clean residual min=-0.000284 max=0.000282 Jy/beam
! Clean residual mean=0.000001 rms=0.000112 Jy/beam
! Combined flux in latest and established models = 0.0162466 Jy
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 189 components and 0.0162466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010894Jy  sigma=0.396900
! Fit after  self-cal, rms=0.010903Jy  sigma=0.395970
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010903Jy  sigma=0.395970
! Fit after  self-cal, rms=0.011193Jy  sigma=0.390731
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.762 mas, bmaj=26.64 mas, bpa=26.32 degrees
! Estimated noise=1.72778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00011822 Jy
! Component: 100  -  total flux cleaned = -0.000206073 Jy
! Component: 150  -  total flux cleaned = -0.000347104 Jy
! Component: 200  -  total flux cleaned = -0.000507416 Jy
! Total flux subtracted in 200 components = -0.000507416 Jy
! Clean residual min=-0.000208 max=0.000206 Jy/beam
! Clean residual mean=0.000001 rms=0.000082 Jy/beam
! Combined flux in latest and established models = 0.0157392 Jy
selfcal
! Performing phase self-cal
! Adding 82 model components to the UV plane model.
! The established model now contains 264 components and 0.0157392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011089Jy  sigma=0.388659
! Fit after  self-cal, rms=0.011092Jy  sigma=0.388215
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000200826 Jy
! Component: 100  -  total flux cleaned = 6.51871e-06 Jy
! Component: 150  -  total flux cleaned = -0.000133743 Jy
! Component: 200  -  total flux cleaned = -0.000379969 Jy
! Total flux subtracted in 200 components = -0.000379969 Jy
! Clean residual min=-0.000194 max=0.000195 Jy/beam
! Clean residual mean=0.000000 rms=0.000075 Jy/beam
! Combined flux in latest and established models = 0.0153592 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 317 components and 0.0153592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011062Jy  sigma=0.387457
! Fit after  self-cal, rms=0.011058Jy  sigma=0.387314
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011058Jy  sigma=0.387314
! Fit after  self-cal, rms=0.011190Jy  sigma=0.385081
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.755 mas, bmaj=26.62 mas, bpa=26.3 degrees
! Estimated noise=1.73968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.95018e-05 Jy
! Component: 100  -  total flux cleaned = -0.000121375 Jy
! Component: 150  -  total flux cleaned = -0.000162839 Jy
! Component: 200  -  total flux cleaned = -0.000197728 Jy
! Total flux subtracted in 200 components = -0.000197728 Jy
! Clean residual min=-0.000187 max=0.000189 Jy/beam
! Clean residual mean=0.000001 rms=0.000070 Jy/beam
! Combined flux in latest and established models = 0.0151615 Jy
selfcal
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 372 components and 0.0151615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011116Jy  sigma=0.384175
! Fit after  self-cal, rms=0.011118Jy  sigma=0.383826
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.977e-05 Jy
! Component: 100  -  total flux cleaned = -7.78507e-05 Jy
! Component: 150  -  total flux cleaned = -0.000203069 Jy
! Component: 200  -  total flux cleaned = -0.000315845 Jy
! Total flux subtracted in 200 components = -0.000315845 Jy
! Clean residual min=-0.000144 max=0.000144 Jy/beam
! Clean residual mean=0.000001 rms=0.000056 Jy/beam
! Combined flux in latest and established models = 0.0148457 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 404 components and 0.0148457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011091Jy  sigma=0.383447
! Fit after  self-cal, rms=0.011089Jy  sigma=0.383346
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011089Jy  sigma=0.383346
! Fit after  self-cal, rms=0.010686Jy  sigma=0.380711
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.801 mas, bmaj=26.54 mas, bpa=26.48 degrees
! Estimated noise=1.73793 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000104618 Jy
! Component: 100  -  total flux cleaned = -0.000155749 Jy
! Component: 150  -  total flux cleaned = -0.000129883 Jy
! Component: 200  -  total flux cleaned = -0.000184028 Jy
! Total flux subtracted in 200 components = -0.000184028 Jy
! Clean residual min=-0.000154 max=0.000155 Jy/beam
! Clean residual mean=0.000000 rms=0.000059 Jy/beam
! Combined flux in latest and established models = 0.0146616 Jy
selfcal
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 454 components and 0.0146617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010644Jy  sigma=0.380667
! Fit after  self-cal, rms=0.010630Jy  sigma=0.380584
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000124542 Jy
! Component: 100  -  total flux cleaned = 0.000187374 Jy
! Component: 150  -  total flux cleaned = 0.000209324 Jy
! Component: 200  -  total flux cleaned = 0.00012893 Jy
! Total flux subtracted in 200 components = 0.00012893 Jy
! Clean residual min=-0.000123 max=0.000123 Jy/beam
! Clean residual mean=0.000000 rms=0.000050 Jy/beam
! Combined flux in latest and established models = 0.0147906 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 513 components and 0.0147906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010611Jy  sigma=0.380387
! Fit after  self-cal, rms=0.010611Jy  sigma=0.380322
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.758 mas, bmaj=26.57 mas, bpa=26.27 degrees
! Estimated noise=1.73582 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.758 x 26.57 at 26.27 degrees (North through East)
! Clean map  min=-0.0018108  max=0.0092219 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.607 mas, bmaj=27.22 mas, bpa=23.17 degrees
! Estimated noise=2.98683 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107639 Jy
! Component: 100  -  total flux cleaned = 0.0101413 Jy
! Component: 150  -  total flux cleaned = 0.0103539 Jy
! Component: 200  -  total flux cleaned = 0.0112534 Jy
! Total flux subtracted in 200 components = 0.0112534 Jy
! Clean residual min=-0.002139 max=0.002153 Jy/beam
! Clean residual mean=0.000008 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.0112534 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 59 model components to the UV plane model.
! The established model now contains 59 components and 0.0112534 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.758 mas, bmaj=26.57 mas, bpa=26.27 degrees
! Estimated noise=1.73582 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000559829 Jy
! Component: 100  -  total flux cleaned = -0.000513541 Jy
! Component: 150  -  total flux cleaned = -0.00158092 Jy
! Component: 200  -  total flux cleaned = -0.00254814 Jy
! Total flux subtracted in 200 components = -0.00254814 Jy
! Clean residual min=-0.000968 max=0.000967 Jy/beam
! Clean residual mean=0.000001 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.00870525 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 122 components and 0.00870525 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.801 mas, bmaj=26.54 mas, bpa=26.48 degrees
! Estimated noise=1.73793 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000640745 Jy
! Component: 100  -  total flux cleaned = 0.000891734 Jy
! Component: 150  -  total flux cleaned = 0.00104453 Jy
! Component: 200  -  total flux cleaned = 0.00123958 Jy
! Total flux subtracted in 200 components = 0.00123958 Jy
! Clean residual min=-0.000257 max=0.000264 Jy/beam
! Clean residual mean=-0.000000 rms=0.000090 Jy/beam
! Combined flux in latest and established models = 0.00994483 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000171997 Jy
! Component: 100  -  total flux cleaned = 0.000343279 Jy
! Component: 150  -  total flux cleaned = 0.000579199 Jy
! Component: 200  -  total flux cleaned = 0.00063926 Jy
! Total flux subtracted in 200 components = 0.00063926 Jy
! Clean residual min=-0.000353 max=0.000345 Jy/beam
! Clean residual mean=-0.000000 rms=0.000095 Jy/beam
! Combined flux in latest and established models = 0.0105841 Jy
! Adding 101 model components to the UV plane model.
! The established model now contains 222 components and 0.0105841 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.758 mas, bmaj=26.57 mas, bpa=26.27 degrees
! Estimated noise=1.73582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.58942e-05 Jy
! Component: 100  -  total flux cleaned = -0.000279443 Jy
! Component: 150  -  total flux cleaned = -0.000363393 Jy
! Component: 200  -  total flux cleaned = -0.000551262 Jy
! Total flux subtracted in 200 components = -0.000551262 Jy
! Clean residual min=-0.000282 max=0.000274 Jy/beam
! Clean residual mean=-0.000000 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.0100328 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 256 components and 0.0100328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010595Jy  sigma=0.381163
! Fit after  self-cal, rms=0.010573Jy  sigma=0.380547
wmodel /d2/scr/pima/bp171a4_uvs/J1052+0806_C_map.mod
! Writing 256 model components to file: /d2/scr/pima/bp171a4_uvs/J1052+0806_C_map.mod
wobs /d2/scr/pima/bp171a4_uvs/J1052+0806_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171a4_uvs/J1052+0806_C_uvs.fits
wwins /d2/scr/pima/bp171a4_uvs/J1052+0806_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp171a4_uvs/J1052+0806_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.758 x 26.57 at 26.27 degrees (North through East)
! Clean map  min=-0.0027991  max=0.010623 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171a4_uvs/J1052+0806_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0106228 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.87281e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.22337 2.22337 4.44673 8.89347 17.7869 35.5739 71.1478
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.01 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  134.93 
quit
! Quitting program
! Log file /d2/scr/pima/bp171a4_uvs/J1052+0806_C_uvs.log closed on Wed Jan 29 04:19:12 2014