! Started logfile: /d2/scr/pima/bp171a3_uvs/J1153-1816_C_uvs.log on Mon Feb 24 08:47:57 2014 obs /d2/scr/pima/bp171a3_uvs/J1153-1816_C_uva.fits ! Reading UV FITS file: /d2/scr/pima/bp171a3_uvs/J1153-1816_C_uva.fits ! AN table 1: 3 integrations on 21 of 21 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1153-1816 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 504 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171a3_uvs/J1153-1816_C] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.011373Jy sigma=39.379983 ! Fit after self-cal, rms=0.910005Jy sigma=35.209234 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.551 mas, bmaj=5.728 mas, bpa=11.87 degrees ! Estimated noise=1.08201 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0605927 Jy ! Component: 100 - total flux cleaned = 0.0900743 Jy ! Total flux subtracted in 100 components = 0.0900743 Jy ! Clean residual min=-0.009851 max=0.014957 Jy/beam ! Clean residual mean=-0.000089 rms=0.003959 Jy/beam ! Combined flux in latest and established models = 0.0900743 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0900743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.055240Jy sigma=2.127737 ! Fit after self-cal, rms=0.055018Jy sigma=2.121347 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.885 mas, bmaj=6.173 mas, bpa=10.54 degrees ! Estimated noise=0.840699 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322326 Jy ! Component: 100 - total flux cleaned = 0.0506303 Jy ! Component: 150 - total flux cleaned = 0.0619018 Jy ! Component: 200 - total flux cleaned = 0.0691178 Jy ! Total flux subtracted in 200 components = 0.0691178 Jy ! Clean residual min=-0.008139 max=0.012171 Jy/beam ! Clean residual mean=-0.000015 rms=0.003017 Jy/beam ! Combined flux in latest and established models = 0.159192 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 70 components and 0.159192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.031898Jy sigma=1.073115 ! Fit after self-cal, rms=0.031867Jy sigma=1.071563 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.885 x 6.173 at 10.54 degrees (North through East) ! Clean map min=-0.0079409 max=0.090636 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.10 HN 0.98 KP 0.88 NL 1.11 ! OV 1.05 PT 0.94 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HN 1.03 KP 0.90 NL 1.20 ! OV 1.06 PT 0.86 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 1.10 KP 0.96 NL 1.10 ! OV 1.08 PT 0.95 SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.08 KP 0.98 NL 1.19 ! OV 1.10 PT 0.89 SC 0.99 ! ! ! Fit before self-cal, rms=0.031867Jy sigma=1.071563 ! Fit after self-cal, rms=0.031031Jy sigma=1.007856 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.887 mas, bmaj=6.243 mas, bpa=10.59 degrees ! Estimated noise=0.854967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444551 Jy ! Component: 100 - total flux cleaned = 0.00679181 Jy ! Component: 150 - total flux cleaned = 0.00825188 Jy ! Component: 200 - total flux cleaned = 0.00918791 Jy ! Total flux subtracted in 200 components = 0.00918791 Jy ! Clean residual min=-0.006611 max=0.010157 Jy/beam ! Clean residual mean=-0.000000 rms=0.002264 Jy/beam ! Combined flux in latest and established models = 0.16838 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 73 components and 0.16838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030148Jy sigma=0.987936 ! Fit after self-cal, rms=0.030164Jy sigma=0.987387 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030164Jy sigma=0.987387 ! Fit after self-cal, rms=0.030223Jy sigma=0.972824 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.883 mas, bmaj=6.237 mas, bpa=10.69 degrees ! Estimated noise=0.875036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264558 Jy ! Component: 100 - total flux cleaned = 0.00414434 Jy ! Component: 150 - total flux cleaned = 0.00509662 Jy ! Component: 200 - total flux cleaned = 0.00547363 Jy ! Total flux subtracted in 200 components = 0.00547363 Jy ! Clean residual min=-0.006987 max=0.010365 Jy/beam ! Clean residual mean=0.000001 rms=0.002320 Jy/beam ! Combined flux in latest and established models = 0.173854 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.173854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.029856Jy sigma=0.966306 ! Fit after self-cal, rms=0.029850Jy sigma=0.966148 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00991627 Jy ! Component: 100 - total flux cleaned = 0.0150955 Jy ! Component: 150 - total flux cleaned = 0.0182403 Jy ! Component: 200 - total flux cleaned = 0.0203439 Jy ! Total flux subtracted in 200 components = 0.0203439 Jy ! Clean residual min=-0.004433 max=0.005914 Jy/beam ! Clean residual mean=0.000001 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.194198 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 120 components and 0.194198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026339Jy sigma=0.821210 ! Fit after self-cal, rms=0.025771Jy sigma=0.795885 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025771Jy sigma=0.795885 ! Fit after self-cal, rms=0.024286Jy sigma=0.725426 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.884 mas, bmaj=6.268 mas, bpa=10.76 degrees ! Estimated noise=0.883259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395412 Jy ! Component: 100 - total flux cleaned = 0.00631208 Jy ! Component: 150 - total flux cleaned = 0.00804705 Jy ! Component: 200 - total flux cleaned = 0.00925257 Jy ! Total flux subtracted in 200 components = 0.00925257 Jy ! Clean residual min=-0.003597 max=0.003527 Jy/beam ! Clean residual mean=-0.000001 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.20345 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 146 components and 0.20345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.023456Jy sigma=0.694153 ! Fit after self-cal, rms=0.023340Jy sigma=0.687429 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206626 Jy ! Component: 100 - total flux cleaned = 0.00289242 Jy ! Component: 150 - total flux cleaned = 0.00342475 Jy ! Component: 200 - total flux cleaned = 0.00392284 Jy ! Total flux subtracted in 200 components = 0.00392284 Jy ! Clean residual min=-0.002995 max=0.002992 Jy/beam ! Clean residual mean=-0.000000 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.207373 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 161 components and 0.207373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.023047Jy sigma=0.678370 ! Fit after self-cal, rms=0.023015Jy sigma=0.676411 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.023015Jy sigma=0.676411 ! Fit after self-cal, rms=0.022666Jy sigma=0.645646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=8.771 mas, bpa=-0.8116 degrees ! Estimated noise=1.03873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316492 Jy ! Component: 100 - total flux cleaned = 0.00510559 Jy ! Component: 150 - total flux cleaned = 0.00640442 Jy ! Component: 200 - total flux cleaned = 0.00698756 Jy ! Total flux subtracted in 200 components = 0.00698756 Jy ! Clean residual min=-0.003093 max=0.002795 Jy/beam ! Clean residual mean=-0.000001 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.214361 Jy selfcal ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 214 components and 0.214361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022331Jy sigma=0.639367 ! Fit after self-cal, rms=0.022300Jy sigma=0.638289 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000931914 Jy ! Component: 100 - total flux cleaned = 0.00114649 Jy ! Component: 150 - total flux cleaned = 0.00140646 Jy ! Component: 200 - total flux cleaned = 0.001604 Jy ! Total flux subtracted in 200 components = 0.001604 Jy ! Clean residual min=-0.003097 max=0.002754 Jy/beam ! Clean residual mean=-0.000000 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.215965 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 224 components and 0.215965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022230Jy sigma=0.637613 ! Fit after self-cal, rms=0.022224Jy sigma=0.637223 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.887 mas, bmaj=6.28 mas, bpa=10.7 degrees ! Estimated noise=0.898465 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.887 x 6.28 at 10.7 degrees (North through East) ! Clean map min=-0.002384 max=0.093688 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.547 mas, bmaj=5.803 mas, bpa=11.94 degrees ! Estimated noise=1.16689 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0652355 Jy ! Component: 100 - total flux cleaned = 0.097033 Jy ! Component: 150 - total flux cleaned = 0.11674 Jy ! Component: 200 - total flux cleaned = 0.130883 Jy ! Total flux subtracted in 200 components = 0.130883 Jy ! Clean residual min=-0.007596 max=0.009457 Jy/beam ! Clean residual mean=-0.000054 rms=0.002729 Jy/beam ! Combined flux in latest and established models = 0.130883 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.130883 Jy ! Inverting map and beam ! Estimated beam: bmin=1.887 mas, bmaj=6.28 mas, bpa=10.7 degrees ! Estimated noise=0.898465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192231 Jy ! Component: 100 - total flux cleaned = 0.0321275 Jy ! Component: 150 - total flux cleaned = 0.0419935 Jy ! Component: 200 - total flux cleaned = 0.0497591 Jy ! Total flux subtracted in 200 components = 0.0497591 Jy ! Clean residual min=-0.005885 max=0.005842 Jy/beam ! Clean residual mean=-0.000018 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 0.180642 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 122 components and 0.180642 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=8.771 mas, bpa=-0.8116 degrees ! Estimated noise=1.03873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104195 Jy ! Component: 100 - total flux cleaned = 0.0174966 Jy ! Component: 150 - total flux cleaned = 0.0224707 Jy ! Component: 200 - total flux cleaned = 0.0260654 Jy ! Total flux subtracted in 200 components = 0.0260654 Jy ! Clean residual min=-0.003804 max=0.002975 Jy/beam ! Clean residual mean=-0.000008 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.206708 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261956 Jy ! Component: 100 - total flux cleaned = 0.00454758 Jy ! Component: 150 - total flux cleaned = 0.00597633 Jy ! Component: 200 - total flux cleaned = 0.0066898 Jy ! Total flux subtracted in 200 components = 0.0066898 Jy ! Clean residual min=-0.003050 max=0.002498 Jy/beam ! Clean residual mean=-0.000002 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.213398 Jy ! Adding 108 model components to the UV plane model. ! The established model now contains 212 components and 0.213398 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.887 mas, bmaj=6.28 mas, bpa=10.7 degrees ! Estimated noise=0.898465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154049 Jy ! Component: 100 - total flux cleaned = 0.000594075 Jy ! Component: 150 - total flux cleaned = 0.000842295 Jy ! Component: 200 - total flux cleaned = 0.0010115 Jy ! Total flux subtracted in 200 components = 0.0010115 Jy ! Clean residual min=-0.002685 max=0.002840 Jy/beam ! Clean residual mean=-0.000001 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.214409 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 226 components and 0.214409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.022421Jy sigma=0.647536 ! Fit after self-cal, rms=0.022414Jy sigma=0.646430 wmodel /d2/scr/pima/bp171a3_uvs/J1153-1816_C_map.mod ! Writing 226 model components to file: /d2/scr/pima/bp171a3_uvs/J1153-1816_C_map.mod wobs /d2/scr/pima/bp171a3_uvs/J1153-1816_C_uvs.fits ! Writing UV FITS file: /d2/scr/pima/bp171a3_uvs/J1153-1816_C_uvs.fits wwins /d2/scr/pima/bp171a3_uvs/J1153-1816_C_map.win ! wwins: Wrote 2 windows to /d2/scr/pima/bp171a3_uvs/J1153-1816_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142465 Jy ! Component: 100 - total flux cleaned = 0.00022894 Jy ! Component: 150 - total flux cleaned = 0.000383789 Jy ! Component: 200 - total flux cleaned = 0.000490036 Jy ! Component: 250 - total flux cleaned = 0.000490278 Jy ! Component: 300 - total flux cleaned = 0.000521344 Jy ! Component: 350 - total flux cleaned = 0.00043274 Jy ! Component: 400 - total flux cleaned = 0.000263887 Jy ! Component: 450 - total flux cleaned = 0.000129397 Jy ! Component: 500 - total flux cleaned = -5.11706e-05 Jy ! Component: 550 - total flux cleaned = -0.000149771 Jy ! Component: 600 - total flux cleaned = -0.000245701 Jy ! Component: 650 - total flux cleaned = -0.000269771 Jy ! Component: 700 - total flux cleaned = -0.000382273 Jy ! Component: 750 - total flux cleaned = -0.000426164 Jy ! Component: 800 - total flux cleaned = -0.000469069 Jy ! Component: 850 - total flux cleaned = -0.000531066 Jy ! Component: 900 - total flux cleaned = -0.000551246 Jy ! Component: 950 - total flux cleaned = -0.000609536 Jy ! Component: 1000 - total flux cleaned = -0.000647626 Jy ! Component: 1050 - total flux cleaned = -0.000740139 Jy ! Component: 1100 - total flux cleaned = -0.000794218 Jy ! Component: 1150 - total flux cleaned = -0.000865032 Jy ! Component: 1200 - total flux cleaned = -0.00095233 Jy ! Component: 1250 - total flux cleaned = -0.00103837 Jy ! Component: 1300 - total flux cleaned = -0.00113978 Jy ! Component: 1350 - total flux cleaned = -0.00122281 Jy ! Component: 1400 - total flux cleaned = -0.00132081 Jy ! Component: 1450 - total flux cleaned = -0.00135296 Jy ! Component: 1500 - total flux cleaned = -0.00143266 Jy ! Component: 1550 - total flux cleaned = -0.00151093 Jy ! Component: 1600 - total flux cleaned = -0.001557 Jy ! Component: 1650 - total flux cleaned = -0.00160249 Jy ! Component: 1700 - total flux cleaned = -0.00163265 Jy ! Component: 1750 - total flux cleaned = -0.00170664 Jy ! Component: 1800 - total flux cleaned = -0.00169205 Jy ! Component: 1850 - total flux cleaned = -0.00173536 Jy ! Component: 1900 - total flux cleaned = -0.00180635 Jy ! Component: 1950 - total flux cleaned = -0.0018061 Jy ! Component: 2000 - total flux cleaned = -0.00181987 Jy ! Component: 2050 - total flux cleaned = -0.00180616 Jy ! Component: 2100 - total flux cleaned = -0.00184705 Jy ! Component: 2150 - total flux cleaned = -0.00184706 Jy ! Component: 2200 - total flux cleaned = -0.00187365 Jy ! Component: 2250 - total flux cleaned = -0.00189999 Jy ! Component: 2300 - total flux cleaned = -0.00189996 Jy ! Component: 2350 - total flux cleaned = -0.00195175 Jy ! Component: 2400 - total flux cleaned = -0.00197731 Jy ! Component: 2450 - total flux cleaned = -0.00202828 Jy ! Component: 2500 - total flux cleaned = -0.00205373 Jy ! Component: 2550 - total flux cleaned = -0.00210408 Jy ! Component: 2600 - total flux cleaned = -0.00210407 Jy ! Component: 2650 - total flux cleaned = -0.00212885 Jy ! Component: 2700 - total flux cleaned = -0.00217818 Jy ! Component: 2750 - total flux cleaned = -0.00216581 Jy ! Component: 2800 - total flux cleaned = -0.0021658 Jy ! Component: 2850 - total flux cleaned = -0.00219013 Jy ! Component: 2900 - total flux cleaned = -0.00219005 Jy ! Component: 2950 - total flux cleaned = -0.00221424 Jy ! Component: 3000 - total flux cleaned = -0.00223832 Jy ! Component: 3050 - total flux cleaned = -0.00220201 Jy ! Component: 3100 - total flux cleaned = -0.00218986 Jy ! Component: 3150 - total flux cleaned = -0.00217774 Jy ! Component: 3200 - total flux cleaned = -0.00215365 Jy ! Component: 3250 - total flux cleaned = -0.00212946 Jy ! Component: 3300 - total flux cleaned = -0.00209317 Jy ! Component: 3350 - total flux cleaned = -0.00206895 Jy ! Component: 3400 - total flux cleaned = -0.00206897 Jy ! Component: 3450 - total flux cleaned = -0.00204467 Jy ! Component: 3500 - total flux cleaned = -0.00202039 Jy ! Component: 3550 - total flux cleaned = -0.00202033 Jy ! Component: 3600 - total flux cleaned = -0.00198357 Jy ! Component: 3650 - total flux cleaned = -0.00199588 Jy ! Component: 3700 - total flux cleaned = -0.00194649 Jy ! Component: 3750 - total flux cleaned = -0.00193397 Jy ! Component: 3800 - total flux cleaned = -0.00189652 Jy ! Component: 3850 - total flux cleaned = -0.00185885 Jy ! Component: 3900 - total flux cleaned = -0.00184624 Jy ! Component: 3950 - total flux cleaned = -0.00179537 Jy ! Component: 4000 - total flux cleaned = -0.00175695 Jy ! Component: 4050 - total flux cleaned = -0.00173112 Jy ! Total flux subtracted in 4096 components = -0.00171809 Jy ! Clean residual min=-0.000809 max=0.000761 Jy/beam ! Clean residual mean=-0.000001 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.212691 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 541 components and 0.212691 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/d2/scr/pima/bp171a3_uvs/J1153-1816_C\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.887 x 6.28 at 10.7 degrees (North through East) ! Clean map min=-0.0018389 max=0.097913 Jy/beam ! Writing clean map to FITS file: /d2/scr/pima/bp171a3_uvs/J1153-1816_C_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0979129 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000203157 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.622462 0.622462 1.24492 2.48985 4.9797 9.9594 19.9188 39.8376 79.6752 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.097 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 481.956 quit ! Quitting program ! Log file /d2/scr/pima/bp171a3_uvs/J1153-1816_C_uvs.log closed on Mon Feb 24 08:48:01 2014