! Started logfile: /d2/scr/pima/bp171a3_uvs/J0611+5633_C_uvs.log on Mon Feb 24 08:42:14 2014
obs /d2/scr/pima/bp171a3_uvs/J0611+5633_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171a3_uvs/J0611+5633_C_uva.fits
! AN table 1: 7 integrations on 1 of 1 possible baselines.
! AN table 2: 4 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.741935 visibilities/baseline/integration-bin.
! Found source: J0611+5633
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 184 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171a3_uvs/J0611+5633_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=0.999860Jy  sigma=44.187280
! Fit after  self-cal, rms=0.976736Jy  sigma=46.331553
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.746 mas, bmaj=30.24 mas, bpa=29.63 degrees
! Estimated noise=1.90623 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174234 Jy
! Component: 100  -  total flux cleaned = 0.0227864 Jy
! Total flux subtracted in 100 components = 0.0227864 Jy
! Clean residual min=-0.002771 max=0.002816 Jy/beam
! Clean residual mean=0.000000 rms=0.001140 Jy/beam
! Combined flux in latest and established models = 0.0227864 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.0227864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012355Jy  sigma=0.492384
! Fit after  self-cal, rms=0.011908Jy  sigma=0.471540
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.171 mas, bmaj=29.18 mas, bpa=28.24 degrees
! Estimated noise=1.41563 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158102 Jy
! Component: 100  -  total flux cleaned = 0.00291261 Jy
! Component: 150  -  total flux cleaned = 0.00319192 Jy
! Component: 200  -  total flux cleaned = 0.00349021 Jy
! Total flux subtracted in 200 components = 0.00349021 Jy
! Clean residual min=-0.000760 max=0.000766 Jy/beam
! Clean residual mean=0.000000 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.0262766 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 99 components and 0.0262766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010090Jy  sigma=0.393474
! Fit after  self-cal, rms=0.009978Jy  sigma=0.391280
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.171 x 29.18 at 28.24 degrees (North through East)
! Clean map  min=-0.0015609  max=0.016041 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.10     KP        0.85     OV        0.85     PT        0.91     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.90     KP        0.96     OV        1.12     PT        0.92     
! 
! 
! Fit before self-cal, rms=0.009978Jy  sigma=0.391280
! Fit after  self-cal, rms=0.009604Jy  sigma=0.382379
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.19 mas, bmaj=29.11 mas, bpa=28.23 degrees
! Estimated noise=1.38421 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.79779e-05 Jy
! Component: 100  -  total flux cleaned = -6.06668e-05 Jy
! Component: 150  -  total flux cleaned = -0.000104504 Jy
! Component: 200  -  total flux cleaned = -0.000190759 Jy
! Total flux subtracted in 200 components = -0.000190759 Jy
! Clean residual min=-0.000348 max=0.000351 Jy/beam
! Clean residual mean=-0.000000 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.0260858 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 151 components and 0.0260858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009443Jy  sigma=0.379015
! Fit after  self-cal, rms=0.009423Jy  sigma=0.378342
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009423Jy  sigma=0.378342
! Fit after  self-cal, rms=0.009297Jy  sigma=0.368862
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.214 mas, bmaj=28.93 mas, bpa=28.26 degrees
! Estimated noise=1.39042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000422221 Jy
! Component: 100  -  total flux cleaned = -0.000645755 Jy
! Component: 150  -  total flux cleaned = -0.000795546 Jy
! Component: 200  -  total flux cleaned = -0.000873997 Jy
! Total flux subtracted in 200 components = -0.000873997 Jy
! Clean residual min=-0.000179 max=0.000180 Jy/beam
! Clean residual mean=-0.000000 rms=0.000077 Jy/beam
! Combined flux in latest and established models = 0.0252118 Jy
selfcal
! Performing phase self-cal
! Adding 92 model components to the UV plane model.
! The established model now contains 240 components and 0.0252118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009225Jy  sigma=0.367650
! Fit after  self-cal, rms=0.009227Jy  sigma=0.367516
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.96709e-05 Jy
! Component: 100  -  total flux cleaned = 0.000104998 Jy
! Component: 150  -  total flux cleaned = 0.000182639 Jy
! Component: 200  -  total flux cleaned = 0.000245528 Jy
! Total flux subtracted in 200 components = 0.000245528 Jy
! Clean residual min=-0.000100 max=0.000101 Jy/beam
! Clean residual mean=-0.000000 rms=0.000046 Jy/beam
! Combined flux in latest and established models = 0.0254574 Jy
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 317 components and 0.0254573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009205Jy  sigma=0.367114
! Fit after  self-cal, rms=0.009205Jy  sigma=0.367093
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009205Jy  sigma=0.367093
! Fit after  self-cal, rms=0.009280Jy  sigma=0.363026
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.194 mas, bmaj=29.02 mas, bpa=28.27 degrees
! Estimated noise=1.39779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000422668 Jy
! Component: 100  -  total flux cleaned = -0.00055361 Jy
! Component: 150  -  total flux cleaned = -0.000617276 Jy
! Component: 200  -  total flux cleaned = -0.000678671 Jy
! Total flux subtracted in 200 components = -0.000678671 Jy
! Clean residual min=-0.000201 max=0.000206 Jy/beam
! Clean residual mean=-0.000000 rms=0.000068 Jy/beam
! Combined flux in latest and established models = 0.0247787 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 344 components and 0.0247787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009222Jy  sigma=0.362795
! Fit after  self-cal, rms=0.009222Jy  sigma=0.362719
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000144065 Jy
! Component: 100  -  total flux cleaned = -0.000132938 Jy
! Component: 150  -  total flux cleaned = -0.000138031 Jy
! Component: 200  -  total flux cleaned = -0.000147271 Jy
! Total flux subtracted in 200 components = -0.000147271 Jy
! Clean residual min=-0.000069 max=0.000069 Jy/beam
! Clean residual mean=-0.000000 rms=0.000027 Jy/beam
! Combined flux in latest and established models = 0.0246314 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 415 components and 0.0246314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009206Jy  sigma=0.362623
! Fit after  self-cal, rms=0.009204Jy  sigma=0.362597
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009204Jy  sigma=0.362597
! Fit after  self-cal, rms=0.009337Jy  sigma=0.361644
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.402 mas, bmaj=28.38 mas, bpa=28.28 degrees
! Estimated noise=1.41847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000259476 Jy
! Component: 100  -  total flux cleaned = -0.000327764 Jy
! Component: 150  -  total flux cleaned = -0.000317302 Jy
! Component: 200  -  total flux cleaned = -0.000346252 Jy
! Total flux subtracted in 200 components = -0.000346252 Jy
! Clean residual min=-0.000162 max=0.000165 Jy/beam
! Clean residual mean=-0.000000 rms=0.000056 Jy/beam
! Combined flux in latest and established models = 0.0242852 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 431 components and 0.0242852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009303Jy  sigma=0.361698
! Fit after  self-cal, rms=0.009296Jy  sigma=0.361634
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000152376 Jy
! Component: 100  -  total flux cleaned = -0.000167271 Jy
! Component: 150  -  total flux cleaned = -0.000214022 Jy
! Component: 200  -  total flux cleaned = -0.000213779 Jy
! Total flux subtracted in 200 components = -0.000213779 Jy
! Clean residual min=-0.000060 max=0.000060 Jy/beam
! Clean residual mean=-0.000000 rms=0.000023 Jy/beam
! Combined flux in latest and established models = 0.0240714 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 482 components and 0.0240714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009283Jy  sigma=0.361645
! Fit after  self-cal, rms=0.009283Jy  sigma=0.361617
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.182 mas, bmaj=29.07 mas, bpa=28.28 degrees
! Estimated noise=1.40768 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.182 x 29.07 at 28.28 degrees (North through East)
! Clean map  min=-0.0011742  max=0.015376 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.767 mas, bmaj=30.2 mas, bpa=29.6 degrees
! Estimated noise=1.90266 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017598 Jy
! Component: 100  -  total flux cleaned = 0.0223217 Jy
! Component: 150  -  total flux cleaned = 0.0233541 Jy
! Component: 200  -  total flux cleaned = 0.0239337 Jy
! Total flux subtracted in 200 components = 0.0239337 Jy
! Clean residual min=-0.001833 max=0.001879 Jy/beam
! Clean residual mean=-0.000001 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.0239337 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 67 model components to the UV plane model.
! The established model now contains 67 components and 0.0239337 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.182 mas, bmaj=29.07 mas, bpa=28.28 degrees
! Estimated noise=1.40768 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000144454 Jy
! Component: 100  -  total flux cleaned = -0.000342923 Jy
! Component: 150  -  total flux cleaned = -0.000508568 Jy
! Component: 200  -  total flux cleaned = -0.000713693 Jy
! Total flux subtracted in 200 components = -0.000713693 Jy
! Clean residual min=-0.000835 max=0.000828 Jy/beam
! Clean residual mean=0.000000 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.02322 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 112 components and 0.02322 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.402 mas, bmaj=28.38 mas, bpa=28.28 degrees
! Estimated noise=1.41847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000328953 Jy
! Component: 100  -  total flux cleaned = 0.000218828 Jy
! Component: 150  -  total flux cleaned = 9.95645e-05 Jy
! Component: 200  -  total flux cleaned = 9.97918e-05 Jy
! Total flux subtracted in 200 components = 9.97918e-05 Jy
! Clean residual min=-0.000206 max=0.000206 Jy/beam
! Clean residual mean=0.000000 rms=0.000075 Jy/beam
! Combined flux in latest and established models = 0.0233198 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.21151e-06 Jy
! Component: 100  -  total flux cleaned = 8.36338e-05 Jy
! Component: 150  -  total flux cleaned = 0.000167782 Jy
! Component: 200  -  total flux cleaned = 0.000216686 Jy
! Total flux subtracted in 200 components = 0.000216686 Jy
! Clean residual min=-0.000210 max=0.000211 Jy/beam
! Clean residual mean=-0.000000 rms=0.000079 Jy/beam
! Combined flux in latest and established models = 0.0235365 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 188 components and 0.0235365 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.182 mas, bmaj=29.07 mas, bpa=28.28 degrees
! Estimated noise=1.40768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.26636e-05 Jy
! Component: 100  -  total flux cleaned = 6.87248e-05 Jy
! Component: 150  -  total flux cleaned = 9.34563e-05 Jy
! Component: 200  -  total flux cleaned = 0.00012661 Jy
! Total flux subtracted in 200 components = 0.00012661 Jy
! Clean residual min=-0.000142 max=0.000140 Jy/beam
! Clean residual mean=0.000000 rms=0.000051 Jy/beam
! Combined flux in latest and established models = 0.0236631 Jy
selfcal
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 239 components and 0.0236631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.009302Jy  sigma=0.362320
! Fit after  self-cal, rms=0.009307Jy  sigma=0.362103
wmodel /d2/scr/pima/bp171a3_uvs/J0611+5633_C_map.mod
! Writing 239 model components to file: /d2/scr/pima/bp171a3_uvs/J0611+5633_C_map.mod
wobs /d2/scr/pima/bp171a3_uvs/J0611+5633_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171a3_uvs/J0611+5633_C_uvs.fits
wwins /d2/scr/pima/bp171a3_uvs/J0611+5633_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp171a3_uvs/J0611+5633_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.182 x 29.07 at 28.28 degrees (North through East)
! Clean map  min=-0.0016855  max=0.014069 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171a3_uvs/J0611+5633_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0140687 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 4.29368e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.91558 0.91558 1.83116 3.66232 7.32464 14.6493 29.2986 58.5971
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.014 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  327.661 
quit
! Quitting program
! Log file /d2/scr/pima/bp171a3_uvs/J0611+5633_C_uvs.log closed on Mon Feb 24 08:42:18 2014