! Started logfile: /scr/pima/bp171a1_uvs/J0654-105A_C_uvs.log on Fri Mar 15 18:00:58 2013
obs /scr/pima/bp171a1_uvs/J0654-105A_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a1_uvs/J0654-105A_C_uva.fits
! AN table 1: 23 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.644444 visibilities/baseline/integration-bin.
! Found source: J0654-105A
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  3.94397e+09      3.2e+07          1      3.2e+07
!  02        2  3.97597e+09      3.2e+07          1      3.2e+07
!  03        3  4.00797e+09      3.2e+07          1      3.2e+07
!  04        4  4.03997e+09      3.2e+07          1      3.2e+07
!  05        5  4.23197e+09      3.2e+07          1      3.2e+07
!  06        6  4.32797e+09      3.2e+07          1      3.2e+07
!  07        7  4.35997e+09      3.2e+07          1      3.2e+07
!  08        8  4.39197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5336 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a1_uvs/J0654-105A_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005808Jy  sigma=0.710992
! Fit after  self-cal, rms=0.904491Jy  sigma=0.639371
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.352 mas, bmaj=3.666 mas, bpa=-6.329 degrees
! Estimated noise=21.9472 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0720452 Jy
! Component: 100  -  total flux cleaned = 0.0944584 Jy
! Total flux subtracted in 100 components = 0.0944584 Jy
! Clean residual min=-0.006688 max=0.012305 Jy/beam
! Clean residual mean=-0.000008 rms=0.002014 Jy/beam
! Combined flux in latest and established models = 0.0944584 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0944584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.062823Jy  sigma=0.044386
! Fit after  self-cal, rms=0.062469Jy  sigma=0.044136
! Inverting map 
! Added new window around map position (9, 55.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127326 Jy
! Component: 100  -  total flux cleaned = 0.02047 Jy
! Total flux subtracted in 100 components = 0.02047 Jy
! Clean residual min=-0.006010 max=0.008949 Jy/beam
! Clean residual mean=-0.000005 rms=0.001660 Jy/beam
! Combined flux in latest and established models = 0.114928 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 18 components and 0.114928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.059330Jy  sigma=0.041915
! Fit after  self-cal, rms=0.059219Jy  sigma=0.041836
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.546 mas, bmaj=3.989 mas, bpa=-6.415 degrees
! Estimated noise=13.7042 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00820124 Jy
! Component: 100  -  total flux cleaned = 0.0123503 Jy
! Component: 150  -  total flux cleaned = 0.0147734 Jy
! Component: 200  -  total flux cleaned = 0.0152981 Jy
! Total flux subtracted in 200 components = 0.0152981 Jy
! Clean residual min=-0.007137 max=0.009874 Jy/beam
! Clean residual mean=0.000003 rms=0.001810 Jy/beam
! Combined flux in latest and established models = 0.130226 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 37 components and 0.130226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.058042Jy  sigma=0.041003
! Fit after  self-cal, rms=0.057896Jy  sigma=0.040900
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        0.76     HN        0.85     KP        0.83     
!   LA        1.17     MK        0.87     NL        0.97     OV        0.83     
!   PT        0.92     SC        0.88     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.70     HN        0.83     KP        0.99     
!   LA        1.26     MK        0.77     NL        1.02     OV        0.79     
!   PT        0.89     SC        0.82     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.75     HN        0.87     KP        1.11     
!   LA        1.29     MK        0.91     NL        1.01     OV        0.81     
!   PT        0.99     SC        0.90     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.04     HN        1.19     KP        1.09     
!   LA        1.40     MK        1.19     NL        0.97     OV        0.98     
!   PT        0.98     SC        1.12     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.21     HN        1.09     KP        1.03     
!   LA        1.48     MK        1.01     NL        1.14     OV        0.97     
!   PT        0.93     SC        1.09     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        1.07     KP        0.96     
!   LA        1.61     MK        1.26     NL        1.21     OV        0.97     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        1.10     KP        0.97     
!   LA        1.66     MK        1.09     NL        1.07     OV        0.99     
!   PT        0.92     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        1.11     KP        0.96     
!   LA        1.58     MK        1.08     NL        1.02     OV        1.15     
!   PT        0.91     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.057896Jy  sigma=0.040900
! Fit after  self-cal, rms=0.054742Jy  sigma=0.036163
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.55 mas, bmaj=3.991 mas, bpa=-6.058 degrees
! Estimated noise=13.8667 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00312143 Jy
! Component: 100  -  total flux cleaned = -0.00359453 Jy
! Component: 150  -  total flux cleaned = -0.00392806 Jy
! Component: 200  -  total flux cleaned = -0.00418561 Jy
! Total flux subtracted in 200 components = -0.00418561 Jy
! Clean residual min=-0.003164 max=0.003083 Jy/beam
! Clean residual mean=0.000001 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.126041 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 48 components and 0.126041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054334Jy  sigma=0.035940
! Fit after  self-cal, rms=0.054423Jy  sigma=0.035875
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054423Jy  sigma=0.035875
! Fit after  self-cal, rms=0.055493Jy  sigma=0.035826
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.545 mas, bmaj=3.978 mas, bpa=-5.928 degrees
! Estimated noise=13.8204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00170998 Jy
! Component: 100  -  total flux cleaned = -0.00209769 Jy
! Component: 150  -  total flux cleaned = -0.00230582 Jy
! Component: 200  -  total flux cleaned = -0.00244362 Jy
! Total flux subtracted in 200 components = -0.00244362 Jy
! Clean residual min=-0.002677 max=0.002904 Jy/beam
! Clean residual mean=0.000001 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.123597 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 51 components and 0.123597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.055335Jy  sigma=0.035740
! Fit after  self-cal, rms=0.055318Jy  sigma=0.035723
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (30.9, -41.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024339 Jy
! Component: 100  -  total flux cleaned = 0.00316978 Jy
! Component: 150  -  total flux cleaned = 0.00383488 Jy
! Component: 200  -  total flux cleaned = 0.00435602 Jy
! Total flux subtracted in 200 components = 0.00435602 Jy
! Clean residual min=-0.002392 max=0.002053 Jy/beam
! Clean residual mean=0.000003 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.127953 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 83 components and 0.127953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.055165Jy  sigma=0.035638
! Fit after  self-cal, rms=0.055154Jy  sigma=0.035630
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.055154Jy  sigma=0.035630
! Fit after  self-cal, rms=0.055907Jy  sigma=0.035606
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.544 mas, bmaj=3.973 mas, bpa=-5.888 degrees
! Estimated noise=13.7806 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000875434 Jy
! Component: 100  -  total flux cleaned = -0.000612018 Jy
! Component: 150  -  total flux cleaned = -0.000356748 Jy
! Component: 200  -  total flux cleaned = -0.000164049 Jy
! Total flux subtracted in 200 components = -0.000164049 Jy
! Clean residual min=-0.002333 max=0.001912 Jy/beam
! Clean residual mean=0.000002 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.127789 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 93 components and 0.127789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.055841Jy  sigma=0.035573
! Fit after  self-cal, rms=0.055838Jy  sigma=0.035568
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000164545 Jy
! Component: 100  -  total flux cleaned = -2.34218e-05 Jy
! Component: 150  -  total flux cleaned = 0.000144808 Jy
! Component: 200  -  total flux cleaned = 0.00026007 Jy
! Total flux subtracted in 200 components = 0.00026007 Jy
! Clean residual min=-0.002320 max=0.001924 Jy/beam
! Clean residual mean=0.000003 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.128049 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 105 components and 0.128049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.055817Jy  sigma=0.035557
! Fit after  self-cal, rms=0.055814Jy  sigma=0.035556
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.055814Jy  sigma=0.035556
! Fit after  self-cal, rms=0.056441Jy  sigma=0.035546
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.426 mas, bmaj=6.294 mas, bpa=-3.158 degrees
! Estimated noise=18.517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000993769 Jy
! Component: 100  -  total flux cleaned = -0.000748489 Jy
! Component: 150  -  total flux cleaned = -0.000517052 Jy
! Component: 200  -  total flux cleaned = -0.000300602 Jy
! Total flux subtracted in 200 components = -0.000300602 Jy
! Clean residual min=-0.003557 max=0.002481 Jy/beam
! Clean residual mean=0.000006 rms=0.000939 Jy/beam
! Combined flux in latest and established models = 0.127749 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 128 components and 0.127749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.056413Jy  sigma=0.035542
! Fit after  self-cal, rms=0.056410Jy  sigma=0.035537
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000125072 Jy
! Component: 100  -  total flux cleaned = 5.6705e-06 Jy
! Component: 150  -  total flux cleaned = 0.000148865 Jy
! Component: 200  -  total flux cleaned = 0.000298748 Jy
! Total flux subtracted in 200 components = 0.000298748 Jy
! Clean residual min=-0.003524 max=0.002450 Jy/beam
! Clean residual mean=0.000006 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.128047 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 133 components and 0.128047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.056407Jy  sigma=0.035543
! Fit after  self-cal, rms=0.056406Jy  sigma=0.035542
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.542 mas, bmaj=3.969 mas, bpa=-5.839 degrees
! Estimated noise=13.76 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.542 x 3.969 at -5.839 degrees (North through East)
! Clean map  min=-0.0022532  max=0.09491 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.359 mas, bmaj=3.67 mas, bpa=-5.462 degrees
! Estimated noise=21.5277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0728669 Jy
! Component: 100  -  total flux cleaned = 0.0960383 Jy
! Component: 150  -  total flux cleaned = 0.107307 Jy
! Component: 200  -  total flux cleaned = 0.113338 Jy
! Total flux subtracted in 200 components = 0.113338 Jy
! Clean residual min=-0.003413 max=0.003238 Jy/beam
! Clean residual mean=-0.000003 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.113338 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.113338 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.542 mas, bmaj=3.969 mas, bpa=-5.839 degrees
! Estimated noise=13.76 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-18, 26.7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00427979 Jy
! Component: 100  -  total flux cleaned = 0.00712563 Jy
! Component: 150  -  total flux cleaned = 0.00912455 Jy
! Component: 200  -  total flux cleaned = 0.0102529 Jy
! Total flux subtracted in 200 components = 0.0102529 Jy
! Clean residual min=-0.002298 max=0.002284 Jy/beam
! Clean residual mean=0.000000 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.123591 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 36 components and 0.123591 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.426 mas, bmaj=6.294 mas, bpa=-3.158 degrees
! Estimated noise=18.517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00213296 Jy
! Component: 100  -  total flux cleaned = 0.00304454 Jy
! Component: 150  -  total flux cleaned = 0.00382977 Jy
! Component: 200  -  total flux cleaned = 0.00431303 Jy
! Total flux subtracted in 200 components = 0.00431303 Jy
! Clean residual min=-0.003399 max=0.002533 Jy/beam
! Clean residual mean=0.000005 rms=0.000921 Jy/beam
! Combined flux in latest and established models = 0.127904 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000422833 Jy
! Component: 100  -  total flux cleaned = 0.000629699 Jy
! Component: 150  -  total flux cleaned = 0.000850726 Jy
! Component: 200  -  total flux cleaned = 0.00102313 Jy
! Total flux subtracted in 200 components = 0.00102313 Jy
! Clean residual min=-0.003381 max=0.002500 Jy/beam
! Clean residual mean=0.000006 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.128927 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 82 components and 0.128927 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.542 mas, bmaj=3.969 mas, bpa=-5.839 degrees
! Estimated noise=13.76 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000273629 Jy
! Component: 100  -  total flux cleaned = 0.000446062 Jy
! Component: 150  -  total flux cleaned = 0.000566648 Jy
! Component: 200  -  total flux cleaned = 0.000649601 Jy
! Total flux subtracted in 200 components = 0.000649601 Jy
! Clean residual min=-0.002104 max=0.001912 Jy/beam
! Clean residual mean=0.000002 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.129577 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 101 components and 0.129577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.056395Jy  sigma=0.035535
! Fit after  self-cal, rms=0.056394Jy  sigma=0.035526
wmodel /scr/pima/bp171a1_uvs/J0654-105A_C_map.mod
! Writing 101 model components to file: /scr/pima/bp171a1_uvs/J0654-105A_C_map.mod
wobs /scr/pima/bp171a1_uvs/J0654-105A_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a1_uvs/J0654-105A_C_uvs.fits
wwins /scr/pima/bp171a1_uvs/J0654-105A_C_map.win
! wwins: Wrote 4 windows to /scr/pima/bp171a1_uvs/J0654-105A_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000894553 Jy
! Component: 100  -  total flux cleaned = -0.00146172 Jy
! Component: 150  -  total flux cleaned = -0.00193184 Jy
! Component: 200  -  total flux cleaned = -0.00244833 Jy
! Component: 250  -  total flux cleaned = -0.00282192 Jy
! Component: 300  -  total flux cleaned = -0.00309328 Jy
! Component: 350  -  total flux cleaned = -0.00338556 Jy
! Component: 400  -  total flux cleaned = -0.00366909 Jy
! Component: 450  -  total flux cleaned = -0.00386186 Jy
! Component: 500  -  total flux cleaned = -0.004105 Jy
! Component: 550  -  total flux cleaned = -0.00434253 Jy
! Component: 600  -  total flux cleaned = -0.00467805 Jy
! Component: 650  -  total flux cleaned = -0.00487987 Jy
! Component: 700  -  total flux cleaned = -0.00507794 Jy
! Component: 750  -  total flux cleaned = -0.00527212 Jy
! Component: 800  -  total flux cleaned = -0.00546289 Jy
! Component: 850  -  total flux cleaned = -0.00560403 Jy
! Component: 900  -  total flux cleaned = -0.00585762 Jy
! Component: 950  -  total flux cleaned = -0.00601599 Jy
! Component: 1000  -  total flux cleaned = -0.00619352 Jy
! Component: 1050  -  total flux cleaned = -0.00634624 Jy
! Component: 1100  -  total flux cleaned = -0.0065179 Jy
! Component: 1150  -  total flux cleaned = -0.00670768 Jy
! Component: 1200  -  total flux cleaned = -0.00681179 Jy
! Component: 1250  -  total flux cleaned = -0.00701662 Jy
! Component: 1300  -  total flux cleaned = -0.00715791 Jy
! Component: 1350  -  total flux cleaned = -0.00731692 Jy
! Component: 1400  -  total flux cleaned = -0.00747368 Jy
! Component: 1450  -  total flux cleaned = -0.00760898 Jy
! Component: 1500  -  total flux cleaned = -0.00770411 Jy
! Component: 1550  -  total flux cleaned = -0.00787361 Jy
! Component: 1600  -  total flux cleaned = -0.00792954 Jy
! Component: 1650  -  total flux cleaned = -0.00811312 Jy
! Component: 1700  -  total flux cleaned = -0.00825777 Jy
! Component: 1750  -  total flux cleaned = -0.00831136 Jy
! Component: 1800  -  total flux cleaned = -0.00848764 Jy
! Component: 1850  -  total flux cleaned = -0.00857458 Jy
! Component: 1900  -  total flux cleaned = -0.00869514 Jy
! Component: 1950  -  total flux cleaned = -0.00878024 Jy
! Component: 2000  -  total flux cleaned = -0.00894859 Jy
! Component: 2050  -  total flux cleaned = -0.00901517 Jy
! Component: 2100  -  total flux cleaned = -0.00911375 Jy
! Component: 2150  -  total flux cleaned = -0.00921141 Jy
! Component: 2200  -  total flux cleaned = -0.0093241 Jy
! Component: 2250  -  total flux cleaned = -0.00946729 Jy
! Component: 2300  -  total flux cleaned = -0.00959305 Jy
! Component: 2350  -  total flux cleaned = -0.0097019 Jy
! Component: 2400  -  total flux cleaned = -0.00980963 Jy
! Component: 2450  -  total flux cleaned = -0.00987044 Jy
! Component: 2500  -  total flux cleaned = -0.00997595 Jy
! Component: 2550  -  total flux cleaned = -0.0100803 Jy
! Component: 2600  -  total flux cleaned = -0.0101541 Jy
! Component: 2650  -  total flux cleaned = -0.0101979 Jy
! Component: 2700  -  total flux cleaned = -0.0102994 Jy
! Component: 2750  -  total flux cleaned = -0.0103281 Jy
! Component: 2800  -  total flux cleaned = -0.0104134 Jy
! Component: 2850  -  total flux cleaned = -0.0104276 Jy
! Component: 2900  -  total flux cleaned = -0.0105252 Jy
! Component: 2950  -  total flux cleaned = -0.0105389 Jy
! Component: 3000  -  total flux cleaned = -0.0105937 Jy
! Component: 3050  -  total flux cleaned = -0.0106345 Jy
! Component: 3100  -  total flux cleaned = -0.0106749 Jy
! Component: 3150  -  total flux cleaned = -0.0107282 Jy
! Component: 3200  -  total flux cleaned = -0.0107811 Jy
! Component: 3250  -  total flux cleaned = -0.0108333 Jy
! Component: 3300  -  total flux cleaned = -0.0108722 Jy
! Component: 3350  -  total flux cleaned = -0.0109235 Jy
! Component: 3400  -  total flux cleaned = -0.0109235 Jy
! Component: 3450  -  total flux cleaned = -0.0109487 Jy
! Component: 3500  -  total flux cleaned = -0.0109361 Jy
! Component: 3550  -  total flux cleaned = -0.0109484 Jy
! Component: 3600  -  total flux cleaned = -0.0109236 Jy
! Component: 3650  -  total flux cleaned = -0.0109727 Jy
! Component: 3700  -  total flux cleaned = -0.0109605 Jy
! Component: 3750  -  total flux cleaned = -0.0109728 Jy
! Component: 3800  -  total flux cleaned = -0.0109848 Jy
! Component: 3850  -  total flux cleaned = -0.0109848 Jy
! Component: 3900  -  total flux cleaned = -0.0110321 Jy
! Component: 3950  -  total flux cleaned = -0.0110205 Jy
! Component: 4000  -  total flux cleaned = -0.0110555 Jy
! Component: 4050  -  total flux cleaned = -0.011044 Jy
! Total flux subtracted in 4096 components = -0.0110324 Jy
! Clean residual min=-0.000694 max=0.000591 Jy/beam
! Clean residual mean=0.000001 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.118545 Jy
keep
! Adding 338 model components to the UV plane model.
! The established model now contains 439 components and 0.118545 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a1_uvs/J0654-105A_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.542 x 3.969 at -5.839 degrees (North through East)
! Clean map  min=-0.0013877  max=0.095293 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a1_uvs/J0654-105A_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0952929 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0002052 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.646009 0.646009 1.29202 2.58404 5.16807 10.3361 20.6723 41.3446 82.6892
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.095 
quit
! Quitting program
! Log file /scr/pima/bp171a1_uvs/J0654-105A_C_uvs.log closed on Fri Mar 15 18:01:02 2013