! Started logfile: /scr/pima/bp171a1_uvs/J0625+0435_X_uvs.log on Fri Mar 15 16:09:09 2013
obs /scr/pima/bp171a1_uvs/J0625+0435_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a1_uvs/J0625+0435_X_uva.fits
! AN table 1: 19 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.584795 visibilities/baseline/integration-bin.
! Found source: J0625+0435
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4000 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a1_uvs/J0625+0435_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004192Jy  sigma=0.709465
! Fit after  self-cal, rms=0.973135Jy  sigma=0.687586
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7366 mas, bmaj=2.051 mas, bpa=-2.772 degrees
! Estimated noise=21.1184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204156 Jy
! Component: 100  -  total flux cleaned = 0.0250967 Jy
! Total flux subtracted in 100 components = 0.0250967 Jy
! Clean residual min=-0.002711 max=0.003320 Jy/beam
! Clean residual mean=0.000000 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.0250967 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0250967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031191Jy  sigma=0.021881
! Fit after  self-cal, rms=0.027747Jy  sigma=0.019423
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00439209 Jy
! Component: 100  -  total flux cleaned = 0.00641009 Jy
! Total flux subtracted in 100 components = 0.00641009 Jy
! Clean residual min=-0.002313 max=0.003253 Jy/beam
! Clean residual mean=-0.000000 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.0315068 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 30 components and 0.0315068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026831Jy  sigma=0.018779
! Fit after  self-cal, rms=0.026826Jy  sigma=0.018776
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8074 mas, bmaj=2.179 mas, bpa=-3.26 degrees
! Estimated noise=15.8409 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00240272 Jy
! Component: 100  -  total flux cleaned = 0.00391273 Jy
! Component: 150  -  total flux cleaned = 0.00491805 Jy
! Component: 200  -  total flux cleaned = 0.00559761 Jy
! Total flux subtracted in 200 components = 0.00559761 Jy
! Clean residual min=-0.002152 max=0.002817 Jy/beam
! Clean residual mean=-0.000001 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.0371044 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 42 components and 0.0371044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026583Jy  sigma=0.018608
! Fit after  self-cal, rms=0.026575Jy  sigma=0.018604
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        0.92     HN        1.41     KP        1.03     
!   LA        0.79     MK        0.94     NL        1.01     OV        1.03     
!   PT        0.93     SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.87     HN        1.22     KP        1.00     
!   LA        0.79     MK        1.01     NL        1.08     OV        0.99     
!   PT        0.92     SC        0.91     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.07     HN        1.66     KP        1.09     
!   LA        0.85     MK        0.99     NL        0.92     OV        1.24     
!   PT        0.90     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.07     HN        1.32     KP        1.03     
!   LA        0.85     MK        1.00     NL        0.97     OV        1.10     
!   PT        0.91     SC        1.04     
! 
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.89     HN        1.52     KP        1.07     
!   LA        0.87     MK        0.85     NL        0.92     OV        0.91     
!   PT        0.91     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        0.93     HN        1.53     KP        1.03     
!   LA        0.91     MK        0.85     NL        0.98     OV        0.99     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        0.90     HN        1.68     KP        1.15     
!   LA        0.76     MK        0.97     NL        0.92     OV        1.11     
!   PT        0.91     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.30     FD        0.94     HN        1.42     KP        1.21     
!   LA        0.76     MK        0.85     NL        0.86     OV        1.06     
!   PT        0.95     SC        1.24     
! 
! 
! Fit before self-cal, rms=0.026575Jy  sigma=0.018604
! Fit after  self-cal, rms=0.027251Jy  sigma=0.017935
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8268 mas, bmaj=2.238 mas, bpa=-2.962 degrees
! Estimated noise=16.0941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000614627 Jy
! Component: 100  -  total flux cleaned = -0.000711063 Jy
! Component: 150  -  total flux cleaned = -0.000782395 Jy
! Component: 200  -  total flux cleaned = -0.000829429 Jy
! Total flux subtracted in 200 components = -0.000829429 Jy
! Clean residual min=-0.001225 max=0.001159 Jy/beam
! Clean residual mean=0.000000 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.036275 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 47 components and 0.036275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027222Jy  sigma=0.017915
! Fit after  self-cal, rms=0.027337Jy  sigma=0.017889
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027337Jy  sigma=0.017889
! Fit after  self-cal, rms=0.027676Jy  sigma=0.017886
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8286 mas, bmaj=2.242 mas, bpa=-2.878 degrees
! Estimated noise=16.0999 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000223276 Jy
! Component: 100  -  total flux cleaned = -0.000286996 Jy
! Component: 150  -  total flux cleaned = -0.000331065 Jy
! Component: 200  -  total flux cleaned = -0.000377071 Jy
! Total flux subtracted in 200 components = -0.000377071 Jy
! Clean residual min=-0.001219 max=0.001136 Jy/beam
! Clean residual mean=0.000000 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.0358979 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 51 components and 0.0358979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027669Jy  sigma=0.017880
! Fit after  self-cal, rms=0.027677Jy  sigma=0.017880
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.13294e-05 Jy
! Component: 100  -  total flux cleaned = -5.76937e-05 Jy
! Component: 150  -  total flux cleaned = -8.18064e-05 Jy
! Component: 200  -  total flux cleaned = -0.000103926 Jy
! Total flux subtracted in 200 components = -0.000103926 Jy
! Clean residual min=-0.001230 max=0.001131 Jy/beam
! Clean residual mean=0.000000 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.035794 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 53 components and 0.035794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027674Jy  sigma=0.017878
! Fit after  self-cal, rms=0.027674Jy  sigma=0.017878
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027674Jy  sigma=0.017878
! Fit after  self-cal, rms=0.027785Jy  sigma=0.017877
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.83 mas, bmaj=2.246 mas, bpa=-2.87 degrees
! Estimated noise=16.1236 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115122 Jy
! Component: 100  -  total flux cleaned = -0.00014423 Jy
! Component: 150  -  total flux cleaned = -0.00016536 Jy
! Component: 200  -  total flux cleaned = -0.000179807 Jy
! Total flux subtracted in 200 components = -0.000179807 Jy
! Clean residual min=-0.001212 max=0.001125 Jy/beam
! Clean residual mean=0.000000 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0356142 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 54 components and 0.0356142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027783Jy  sigma=0.017876
! Fit after  self-cal, rms=0.027785Jy  sigma=0.017876
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.70454e-05 Jy
! Component: 100  -  total flux cleaned = -2.15238e-05 Jy
! Component: 150  -  total flux cleaned = -3.39341e-05 Jy
! Component: 200  -  total flux cleaned = -3.77857e-05 Jy
! Total flux subtracted in 200 components = -3.77857e-05 Jy
! Clean residual min=-0.001216 max=0.001129 Jy/beam
! Clean residual mean=0.000000 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.0355764 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 55 components and 0.0355764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027783Jy  sigma=0.017875
! Fit after  self-cal, rms=0.027783Jy  sigma=0.017875
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027783Jy  sigma=0.017875
! Fit after  self-cal, rms=0.027843Jy  sigma=0.017875
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.115 mas, bmaj=3.497 mas, bpa=0.169 degrees
! Estimated noise=20.7008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000230003 Jy
! Component: 100  -  total flux cleaned = -0.000262003 Jy
! Component: 150  -  total flux cleaned = -0.000293359 Jy
! Component: 200  -  total flux cleaned = -0.0003146 Jy
! Total flux subtracted in 200 components = -0.0003146 Jy
! Clean residual min=-0.001266 max=0.001473 Jy/beam
! Clean residual mean=0.000000 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.0352618 Jy
selfcal
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 57 components and 0.0352618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027846Jy  sigma=0.017876
! Fit after  self-cal, rms=0.027845Jy  sigma=0.017875
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12.2, -16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000683081 Jy
! Component: 100  -  total flux cleaned = 0.000744184 Jy
! Component: 150  -  total flux cleaned = 0.000790046 Jy
! Component: 200  -  total flux cleaned = 0.000827512 Jy
! Total flux subtracted in 200 components = 0.000827512 Jy
! Clean residual min=-0.000950 max=0.000956 Jy/beam
! Clean residual mean=0.000000 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.0360893 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 102 components and 0.0360893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027798Jy  sigma=0.017841
! Fit after  self-cal, rms=0.027784Jy  sigma=0.017836
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8315 mas, bmaj=2.249 mas, bpa=-2.878 degrees
! Estimated noise=16.1518 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8315 x 2.249 at -2.878 degrees (North through East)
! Clean map  min=-0.0010176  max=0.031427 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7373 mas, bmaj=2.07 mas, bpa=-2.524 degrees
! Estimated noise=21.9923 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0240754 Jy
! Component: 100  -  total flux cleaned = 0.0295758 Jy
! Component: 150  -  total flux cleaned = 0.0313739 Jy
! Component: 200  -  total flux cleaned = 0.0324771 Jy
! Total flux subtracted in 200 components = 0.0324771 Jy
! Clean residual min=-0.001900 max=0.001662 Jy/beam
! Clean residual mean=0.000000 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.0324771 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.0324771 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8315 mas, bmaj=2.249 mas, bpa=-2.878 degrees
! Estimated noise=16.1518 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116223 Jy
! Component: 100  -  total flux cleaned = 0.00161157 Jy
! Component: 150  -  total flux cleaned = 0.00191353 Jy
! Component: 200  -  total flux cleaned = 0.00211342 Jy
! Total flux subtracted in 200 components = 0.00211342 Jy
! Clean residual min=-0.001108 max=0.000935 Jy/beam
! Clean residual mean=0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0345905 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 58 components and 0.0345905 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.115 mas, bmaj=3.497 mas, bpa=0.169 degrees
! Estimated noise=20.7008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000603397 Jy
! Component: 100  -  total flux cleaned = 0.00089667 Jy
! Component: 150  -  total flux cleaned = 0.00105569 Jy
! Component: 200  -  total flux cleaned = 0.00117117 Jy
! Total flux subtracted in 200 components = 0.00117117 Jy
! Clean residual min=-0.000979 max=0.000861 Jy/beam
! Clean residual mean=0.000000 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.0357617 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000130695 Jy
! Component: 100  -  total flux cleaned = 0.000204305 Jy
! Component: 150  -  total flux cleaned = 0.000252467 Jy
! Component: 200  -  total flux cleaned = 0.000297874 Jy
! Total flux subtracted in 200 components = 0.000297874 Jy
! Clean residual min=-0.000973 max=0.000856 Jy/beam
! Clean residual mean=0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0360595 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 110 components and 0.0360596 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8315 mas, bmaj=2.249 mas, bpa=-2.878 degrees
! Estimated noise=16.1518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000167727 Jy
! Component: 100  -  total flux cleaned = -0.000114963 Jy
! Component: 150  -  total flux cleaned = -6.83592e-05 Jy
! Component: 200  -  total flux cleaned = -3.94644e-05 Jy
! Total flux subtracted in 200 components = -3.94644e-05 Jy
! Clean residual min=-0.001042 max=0.000834 Jy/beam
! Clean residual mean=0.000000 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.0360201 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 133 components and 0.0360201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027734Jy  sigma=0.017800
! Fit after  self-cal, rms=0.027723Jy  sigma=0.017796
wmodel /scr/pima/bp171a1_uvs/J0625+0435_X_map.mod
! Writing 133 model components to file: /scr/pima/bp171a1_uvs/J0625+0435_X_map.mod
wobs /scr/pima/bp171a1_uvs/J0625+0435_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a1_uvs/J0625+0435_X_uvs.fits
wwins /scr/pima/bp171a1_uvs/J0625+0435_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a1_uvs/J0625+0435_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000428858 Jy
! Component: 100  -  total flux cleaned = -0.000589671 Jy
! Component: 150  -  total flux cleaned = -0.000709847 Jy
! Component: 200  -  total flux cleaned = -0.000695861 Jy
! Component: 250  -  total flux cleaned = -0.000709525 Jy
! Component: 300  -  total flux cleaned = -0.000670466 Jy
! Component: 350  -  total flux cleaned = -0.000645643 Jy
! Component: 400  -  total flux cleaned = -0.000621717 Jy
! Component: 450  -  total flux cleaned = -0.00062189 Jy
! Component: 500  -  total flux cleaned = -0.000610295 Jy
! Component: 550  -  total flux cleaned = -0.000599194 Jy
! Component: 600  -  total flux cleaned = -0.000631995 Jy
! Component: 650  -  total flux cleaned = -0.000642629 Jy
! Component: 700  -  total flux cleaned = -0.000674222 Jy
! Component: 750  -  total flux cleaned = -0.000684475 Jy
! Component: 800  -  total flux cleaned = -0.000745412 Jy
! Component: 850  -  total flux cleaned = -0.000775233 Jy
! Component: 900  -  total flux cleaned = -0.000784854 Jy
! Component: 950  -  total flux cleaned = -0.000823244 Jy
! Component: 1000  -  total flux cleaned = -0.000794964 Jy
! Component: 1050  -  total flux cleaned = -0.000813775 Jy
! Component: 1100  -  total flux cleaned = -0.00081392 Jy
! Component: 1150  -  total flux cleaned = -0.00085033 Jy
! Component: 1200  -  total flux cleaned = -0.000886066 Jy
! Component: 1250  -  total flux cleaned = -0.000894934 Jy
! Component: 1300  -  total flux cleaned = -0.000894815 Jy
! Component: 1350  -  total flux cleaned = -0.000912114 Jy
! Component: 1400  -  total flux cleaned = -0.000945923 Jy
! Component: 1450  -  total flux cleaned = -0.000920653 Jy
! Component: 1500  -  total flux cleaned = -0.000928863 Jy
! Component: 1550  -  total flux cleaned = -0.000928853 Jy
! Component: 1600  -  total flux cleaned = -0.000928868 Jy
! Component: 1650  -  total flux cleaned = -0.000905072 Jy
! Component: 1700  -  total flux cleaned = -0.000936517 Jy
! Component: 1750  -  total flux cleaned = -0.000913118 Jy
! Component: 1800  -  total flux cleaned = -0.000905521 Jy
! Component: 1850  -  total flux cleaned = -0.000905534 Jy
! Component: 1900  -  total flux cleaned = -0.000905535 Jy
! Component: 1950  -  total flux cleaned = -0.000883077 Jy
! Component: 2000  -  total flux cleaned = -0.000883148 Jy
! Component: 2050  -  total flux cleaned = -0.000890479 Jy
! Component: 2100  -  total flux cleaned = -0.000861415 Jy
! Component: 2150  -  total flux cleaned = -0.000861481 Jy
! Component: 2200  -  total flux cleaned = -0.00086158 Jy
! Component: 2250  -  total flux cleaned = -0.000861615 Jy
! Component: 2300  -  total flux cleaned = -0.000875487 Jy
! Component: 2350  -  total flux cleaned = -0.000847648 Jy
! Component: 2400  -  total flux cleaned = -0.000840701 Jy
! Component: 2450  -  total flux cleaned = -0.000854238 Jy
! Component: 2500  -  total flux cleaned = -0.000833973 Jy
! Component: 2550  -  total flux cleaned = -0.000807226 Jy
! Component: 2600  -  total flux cleaned = -0.000813866 Jy
! Component: 2650  -  total flux cleaned = -0.000807174 Jy
! Component: 2700  -  total flux cleaned = -0.000813596 Jy
! Component: 2750  -  total flux cleaned = -0.000794162 Jy
! Component: 2800  -  total flux cleaned = -0.000800575 Jy
! Component: 2850  -  total flux cleaned = -0.000787841 Jy
! Component: 2900  -  total flux cleaned = -0.00079421 Jy
! Component: 2950  -  total flux cleaned = -0.00080672 Jy
! Component: 3000  -  total flux cleaned = -0.000806665 Jy
! Component: 3050  -  total flux cleaned = -0.000812813 Jy
! Component: 3100  -  total flux cleaned = -0.000806689 Jy
! Component: 3150  -  total flux cleaned = -0.000818774 Jy
! Component: 3200  -  total flux cleaned = -0.000812681 Jy
! Component: 3250  -  total flux cleaned = -0.000800664 Jy
! Component: 3300  -  total flux cleaned = -0.000800672 Jy
! Component: 3350  -  total flux cleaned = -0.000806628 Jy
! Component: 3400  -  total flux cleaned = -0.000812492 Jy
! Component: 3450  -  total flux cleaned = -0.000794989 Jy
! Component: 3500  -  total flux cleaned = -0.000795007 Jy
! Component: 3550  -  total flux cleaned = -0.000795028 Jy
! Component: 3600  -  total flux cleaned = -0.000800649 Jy
! Component: 3650  -  total flux cleaned = -0.00079496 Jy
! Component: 3700  -  total flux cleaned = -0.000806232 Jy
! Component: 3750  -  total flux cleaned = -0.000811819 Jy
! Component: 3800  -  total flux cleaned = -0.00080625 Jy
! Component: 3850  -  total flux cleaned = -0.000828468 Jy
! Component: 3900  -  total flux cleaned = -0.000833948 Jy
! Component: 3950  -  total flux cleaned = -0.000850366 Jy
! Component: 4000  -  total flux cleaned = -0.000855811 Jy
! Component: 4050  -  total flux cleaned = -0.0008504 Jy
! Total flux subtracted in 4096 components = -0.000872031 Jy
! Clean residual min=-0.000323 max=0.000437 Jy/beam
! Clean residual mean=-0.000000 rms=0.000089 Jy/beam
! Combined flux in latest and established models = 0.0351481 Jy
keep
! Adding 272 model components to the UV plane model.
! The established model now contains 405 components and 0.035148 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a1_uvs/J0625+0435_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8315 x 2.249 at -2.878 degrees (North through East)
! Clean map  min=-0.0006731  max=0.031598 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a1_uvs/J0625+0435_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0315983 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 8.51216e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.808161 0.808161 1.61632 3.23264 6.46529 12.9306 25.8611 51.7223
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.031 
quit
! Quitting program
! Log file /scr/pima/bp171a1_uvs/J0625+0435_X_uvs.log closed on Fri Mar 15 16:09:12 2013