! Started logfile: /scr/pima/bp171a1_uvs/J0552-0605_X_uvs.log on Fri Mar 15 16:08:39 2013
obs /scr/pima/bp171a1_uvs/J0552-0605_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a1_uvs/J0552-0605_X_uva.fits
! AN table 1: 11 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.834343 visibilities/baseline/integration-bin.
! Found source: J0552-0605
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3304 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a1_uvs/J0552-0605_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002396Jy  sigma=0.708513
! Fit after  self-cal, rms=0.962690Jy  sigma=0.680462
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7856 mas, bmaj=2.08 mas, bpa=2.281 degrees
! Estimated noise=23.1614 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0276034 Jy
! Component: 100  -  total flux cleaned = 0.0384137 Jy
! Total flux subtracted in 100 components = 0.0384137 Jy
! Clean residual min=-0.003248 max=0.006658 Jy/beam
! Clean residual mean=0.000003 rms=0.001071 Jy/beam
! Combined flux in latest and established models = 0.0384137 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0384137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029708Jy  sigma=0.020974
! Fit after  self-cal, rms=0.028801Jy  sigma=0.020332
! Inverting map 
! Added new window around map position (-1.2, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00708056 Jy
! Component: 100  -  total flux cleaned = 0.0116122 Jy
! Total flux subtracted in 100 components = 0.0116122 Jy
! Clean residual min=-0.002840 max=0.004376 Jy/beam
! Clean residual mean=0.000002 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.0500259 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 33 components and 0.0500259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026289Jy  sigma=0.018556
! Fit after  self-cal, rms=0.026223Jy  sigma=0.018509
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9227 mas, bmaj=2.292 mas, bpa=1.287 degrees
! Estimated noise=17.4042 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00503844 Jy
! Component: 100  -  total flux cleaned = 0.00824625 Jy
! Component: 150  -  total flux cleaned = 0.0104576 Jy
! Component: 200  -  total flux cleaned = 0.0120275 Jy
! Total flux subtracted in 200 components = 0.0120275 Jy
! Clean residual min=-0.002598 max=0.003211 Jy/beam
! Clean residual mean=0.000000 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.0620534 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 64 components and 0.0620534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025094Jy  sigma=0.017712
! Fit after  self-cal, rms=0.025061Jy  sigma=0.017689
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.00     HN        1.36     KP        1.00     
!   LA        1.00     MK        1.09     NL        0.88     OV        1.08     
!   PT        0.84     SC        1.02     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.91     HN        1.49     KP        1.10     
!   LA        0.96     MK        1.01     NL        1.09     OV        0.90     
!   PT        0.81     SC        0.95     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.29     KP        1.24     
!   LA        0.84     MK        1.20     NL        0.94     OV        0.93     
!   PT        0.88     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.97     HN        1.77     KP        1.06     
!   LA        0.96     MK        0.93     NL        0.96     OV        0.91     
!   PT        0.92     SC        1.08     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.89     HN        1.24     KP        1.14     
!   LA        0.96     MK        0.86     NL        0.99     OV        0.90     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.90     HN        1.80     KP        1.11     
!   LA        0.94     MK        0.95     NL        1.02     OV        1.03     
!   PT        0.86     SC        0.97     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.91     HN        1.63     KP        1.19     
!   LA        0.91     MK        1.02     NL        1.01     OV        1.01     
!   PT        0.89     SC        1.01     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        0.84     HN        1.42     KP        1.18     
!   LA        0.91     MK        1.05     NL        1.03     OV        0.99     
!   PT        0.89     SC        1.10     
! 
! 
! Fit before self-cal, rms=0.025061Jy  sigma=0.017689
! Fit after  self-cal, rms=0.025960Jy  sigma=0.016660
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9231 mas, bmaj=2.317 mas, bpa=1.073 degrees
! Estimated noise=18.0447 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000721502 Jy
! Component: 100  -  total flux cleaned = -0.000719927 Jy
! Component: 150  -  total flux cleaned = -0.000720541 Jy
! Component: 200  -  total flux cleaned = -0.00070028 Jy
! Total flux subtracted in 200 components = -0.00070028 Jy
! Clean residual min=-0.001586 max=0.002097 Jy/beam
! Clean residual mean=0.000001 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.0613531 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 77 components and 0.0613531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025908Jy  sigma=0.016628
! Fit after  self-cal, rms=0.025961Jy  sigma=0.016616
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025961Jy  sigma=0.016616
! Fit after  self-cal, rms=0.026187Jy  sigma=0.016613
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9252 mas, bmaj=2.322 mas, bpa=1.124 degrees
! Estimated noise=18.0595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000445177 Jy
! Component: 100  -  total flux cleaned = -0.000482388 Jy
! Component: 150  -  total flux cleaned = -0.000449233 Jy
! Component: 200  -  total flux cleaned = -0.000433574 Jy
! Total flux subtracted in 200 components = -0.000433574 Jy
! Clean residual min=-0.001567 max=0.002051 Jy/beam
! Clean residual mean=0.000001 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.0609195 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 81 components and 0.0609195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026162Jy  sigma=0.016598
! Fit after  self-cal, rms=0.026163Jy  sigma=0.016597
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20.6, -47.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176718 Jy
! Component: 100  -  total flux cleaned = 0.00249341 Jy
! Component: 150  -  total flux cleaned = 0.0028429 Jy
! Component: 200  -  total flux cleaned = 0.00308407 Jy
! Total flux subtracted in 200 components = 0.00308407 Jy
! Clean residual min=-0.001431 max=0.001340 Jy/beam
! Clean residual mean=0.000001 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.0640036 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 103 components and 0.0640036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026034Jy  sigma=0.016511
! Fit after  self-cal, rms=0.026021Jy  sigma=0.016503
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026021Jy  sigma=0.016503
! Fit after  self-cal, rms=0.025765Jy  sigma=0.016497
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.924 mas, bmaj=2.323 mas, bpa=0.9738 degrees
! Estimated noise=17.9181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000554554 Jy
! Component: 100  -  total flux cleaned = 0.000744707 Jy
! Component: 150  -  total flux cleaned = 0.000843955 Jy
! Component: 200  -  total flux cleaned = 0.00088887 Jy
! Total flux subtracted in 200 components = 0.00088887 Jy
! Clean residual min=-0.001365 max=0.001290 Jy/beam
! Clean residual mean=0.000001 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.0648925 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 112 components and 0.0648924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025737Jy  sigma=0.016480
! Fit after  self-cal, rms=0.025735Jy  sigma=0.016479
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000153083 Jy
! Component: 100  -  total flux cleaned = 0.000180597 Jy
! Component: 150  -  total flux cleaned = 0.000205911 Jy
! Component: 200  -  total flux cleaned = 0.000229129 Jy
! Total flux subtracted in 200 components = 0.000229129 Jy
! Clean residual min=-0.001353 max=0.001296 Jy/beam
! Clean residual mean=0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.0651216 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 119 components and 0.0651216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025721Jy  sigma=0.016472
! Fit after  self-cal, rms=0.025720Jy  sigma=0.016472
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025720Jy  sigma=0.016472
! Fit after  self-cal, rms=0.025615Jy  sigma=0.016470
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.153 mas, bmaj=4.013 mas, bpa=3.198 degrees
! Estimated noise=22.09 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000276353 Jy
! Component: 100  -  total flux cleaned = 0.000377308 Jy
! Component: 150  -  total flux cleaned = 0.000367194 Jy
! Component: 200  -  total flux cleaned = 0.000366951 Jy
! Total flux subtracted in 200 components = 0.000366951 Jy
! Clean residual min=-0.001693 max=0.001599 Jy/beam
! Clean residual mean=0.000002 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.0654885 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 124 components and 0.0654885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025616Jy  sigma=0.016465
! Fit after  self-cal, rms=0.025610Jy  sigma=0.016463
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.33553e-05 Jy
! Component: 100  -  total flux cleaned = 9.28433e-05 Jy
! Component: 150  -  total flux cleaned = 0.000166389 Jy
! Component: 200  -  total flux cleaned = 0.000180625 Jy
! Total flux subtracted in 200 components = 0.000180625 Jy
! Clean residual min=-0.001683 max=0.001579 Jy/beam
! Clean residual mean=0.000002 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.0656692 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 129 components and 0.0656692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025612Jy  sigma=0.016462
! Fit after  self-cal, rms=0.025609Jy  sigma=0.016461
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9236 mas, bmaj=2.323 mas, bpa=0.8767 degrees
! Estimated noise=17.8503 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9236 x 2.323 at 0.8767 degrees (North through East)
! Clean map  min=-0.0012643  max=0.033624 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7806 mas, bmaj=2.072 mas, bpa=2.018 degrees
! Estimated noise=24.0512 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0289163 Jy
! Component: 100  -  total flux cleaned = 0.0394059 Jy
! Component: 150  -  total flux cleaned = 0.045337 Jy
! Component: 200  -  total flux cleaned = 0.0492493 Jy
! Total flux subtracted in 200 components = 0.0492493 Jy
! Clean residual min=-0.002208 max=0.002603 Jy/beam
! Clean residual mean=0.000002 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.0492492 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.0492492 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9236 mas, bmaj=2.323 mas, bpa=0.8767 degrees
! Estimated noise=17.8503 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00388196 Jy
! Component: 100  -  total flux cleaned = 0.00644248 Jy
! Component: 150  -  total flux cleaned = 0.0083327 Jy
! Component: 200  -  total flux cleaned = 0.00980582 Jy
! Total flux subtracted in 200 components = 0.00980582 Jy
! Clean residual min=-0.001697 max=0.001922 Jy/beam
! Clean residual mean=0.000001 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.0590551 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 76 components and 0.0590551 Jy
! Inverting map 
! Added new window around map position (-3, -4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168302 Jy
! Component: 100  -  total flux cleaned = 0.00271588 Jy
! Component: 150  -  total flux cleaned = 0.00336721 Jy
! Component: 200  -  total flux cleaned = 0.00377605 Jy
! Total flux subtracted in 200 components = 0.00377605 Jy
! Clean residual min=-0.001421 max=0.001210 Jy/beam
! Clean residual mean=0.000001 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.0628311 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 100 components and 0.0628311 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.153 mas, bmaj=4.013 mas, bpa=3.198 degrees
! Estimated noise=22.09 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00076218 Jy
! Component: 100  -  total flux cleaned = 0.0013041 Jy
! Component: 150  -  total flux cleaned = 0.00157982 Jy
! Component: 200  -  total flux cleaned = 0.00174117 Jy
! Total flux subtracted in 200 components = 0.00174117 Jy
! Clean residual min=-0.001656 max=0.001492 Jy/beam
! Clean residual mean=0.000002 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.0645723 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105562 Jy
! Component: 100  -  total flux cleaned = 0.000190801 Jy
! Component: 150  -  total flux cleaned = 0.000269498 Jy
! Component: 200  -  total flux cleaned = 0.000352535 Jy
! Total flux subtracted in 200 components = 0.000352535 Jy
! Clean residual min=-0.001615 max=0.001508 Jy/beam
! Clean residual mean=0.000002 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.0649248 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 131 components and 0.0649248 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9236 mas, bmaj=2.323 mas, bpa=0.8767 degrees
! Estimated noise=17.8503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.53785e-05 Jy
! Component: 100  -  total flux cleaned = 0.00011538 Jy
! Component: 150  -  total flux cleaned = 0.000175971 Jy
! Component: 200  -  total flux cleaned = 0.000232946 Jy
! Total flux subtracted in 200 components = 0.000232946 Jy
! Clean residual min=-0.001282 max=0.001215 Jy/beam
! Clean residual mean=0.000001 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.0651578 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 151 components and 0.0651577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025533Jy  sigma=0.016436
! Fit after  self-cal, rms=0.025506Jy  sigma=0.016426
wmodel /scr/pima/bp171a1_uvs/J0552-0605_X_map.mod
! Writing 151 model components to file: /scr/pima/bp171a1_uvs/J0552-0605_X_map.mod
wobs /scr/pima/bp171a1_uvs/J0552-0605_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a1_uvs/J0552-0605_X_uvs.fits
wwins /scr/pima/bp171a1_uvs/J0552-0605_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bp171a1_uvs/J0552-0605_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000263679 Jy
! Component: 100  -  total flux cleaned = -0.0003279 Jy
! Component: 150  -  total flux cleaned = -0.000308188 Jy
! Component: 200  -  total flux cleaned = -0.000343638 Jy
! Component: 250  -  total flux cleaned = -0.000431778 Jy
! Component: 300  -  total flux cleaned = -0.00051569 Jy
! Component: 350  -  total flux cleaned = -0.00054775 Jy
! Component: 400  -  total flux cleaned = -0.000563427 Jy
! Component: 450  -  total flux cleaned = -0.000533815 Jy
! Component: 500  -  total flux cleaned = -0.000533981 Jy
! Component: 550  -  total flux cleaned = -0.00053409 Jy
! Component: 600  -  total flux cleaned = -0.000534089 Jy
! Component: 650  -  total flux cleaned = -0.000534185 Jy
! Component: 700  -  total flux cleaned = -0.000534307 Jy
! Component: 750  -  total flux cleaned = -0.000534437 Jy
! Component: 800  -  total flux cleaned = -0.000571639 Jy
! Component: 850  -  total flux cleaned = -0.000583719 Jy
! Component: 900  -  total flux cleaned = -0.000607349 Jy
! Component: 950  -  total flux cleaned = -0.000595472 Jy
! Component: 1000  -  total flux cleaned = -0.000584087 Jy
! Component: 1050  -  total flux cleaned = -0.000595029 Jy
! Component: 1100  -  total flux cleaned = -0.000572969 Jy
! Component: 1150  -  total flux cleaned = -0.00055157 Jy
! Component: 1200  -  total flux cleaned = -0.000530624 Jy
! Component: 1250  -  total flux cleaned = -0.00055143 Jy
! Component: 1300  -  total flux cleaned = -0.000541231 Jy
! Component: 1350  -  total flux cleaned = -0.000541066 Jy
! Component: 1400  -  total flux cleaned = -0.000531156 Jy
! Component: 1450  -  total flux cleaned = -0.000512003 Jy
! Component: 1500  -  total flux cleaned = -0.000530933 Jy
! Component: 1550  -  total flux cleaned = -0.000530921 Jy
! Component: 1600  -  total flux cleaned = -0.000530855 Jy
! Component: 1650  -  total flux cleaned = -0.000512746 Jy
! Component: 1700  -  total flux cleaned = -0.000521643 Jy
! Component: 1750  -  total flux cleaned = -0.000468907 Jy
! Component: 1800  -  total flux cleaned = -0.000443138 Jy
! Component: 1850  -  total flux cleaned = -0.000434695 Jy
! Component: 1900  -  total flux cleaned = -0.000434638 Jy
! Component: 1950  -  total flux cleaned = -0.000409679 Jy
! Component: 2000  -  total flux cleaned = -0.000401545 Jy
! Component: 2050  -  total flux cleaned = -0.000401507 Jy
! Component: 2100  -  total flux cleaned = -0.000409495 Jy
! Component: 2150  -  total flux cleaned = -0.000393726 Jy
! Component: 2200  -  total flux cleaned = -0.000424895 Jy
! Component: 2250  -  total flux cleaned = -0.000409282 Jy
! Component: 2300  -  total flux cleaned = -0.000386254 Jy
! Component: 2350  -  total flux cleaned = -0.000371236 Jy
! Component: 2400  -  total flux cleaned = -0.00037132 Jy
! Component: 2450  -  total flux cleaned = -0.000363932 Jy
! Component: 2500  -  total flux cleaned = -0.000356779 Jy
! Component: 2550  -  total flux cleaned = -0.000356854 Jy
! Component: 2600  -  total flux cleaned = -0.000349798 Jy
! Component: 2650  -  total flux cleaned = -0.000349787 Jy
! Component: 2700  -  total flux cleaned = -0.000349767 Jy
! Component: 2750  -  total flux cleaned = -0.000349771 Jy
! Component: 2800  -  total flux cleaned = -0.000315528 Jy
! Component: 2850  -  total flux cleaned = -0.000335868 Jy
! Component: 2900  -  total flux cleaned = -0.000329139 Jy
! Component: 2950  -  total flux cleaned = -0.000335827 Jy
! Component: 3000  -  total flux cleaned = -0.000335742 Jy
! Component: 3050  -  total flux cleaned = -0.000335745 Jy
! Component: 3100  -  total flux cleaned = -0.000335654 Jy
! Component: 3150  -  total flux cleaned = -0.000329231 Jy
! Component: 3200  -  total flux cleaned = -0.000335642 Jy
! Component: 3250  -  total flux cleaned = -0.00033559 Jy
! Component: 3300  -  total flux cleaned = -0.000329325 Jy
! Component: 3350  -  total flux cleaned = -0.000335533 Jy
! Component: 3400  -  total flux cleaned = -0.00032317 Jy
! Component: 3450  -  total flux cleaned = -0.000316989 Jy
! Component: 3500  -  total flux cleaned = -0.000304783 Jy
! Component: 3550  -  total flux cleaned = -0.000298752 Jy
! Component: 3600  -  total flux cleaned = -0.000310794 Jy
! Component: 3650  -  total flux cleaned = -0.000304845 Jy
! Component: 3700  -  total flux cleaned = -0.000304833 Jy
! Component: 3750  -  total flux cleaned = -0.000298983 Jy
! Component: 3800  -  total flux cleaned = -0.00028731 Jy
! Component: 3850  -  total flux cleaned = -0.000287333 Jy
! Component: 3900  -  total flux cleaned = -0.000281524 Jy
! Component: 3950  -  total flux cleaned = -0.000281512 Jy
! Component: 4000  -  total flux cleaned = -0.000264384 Jy
! Component: 4050  -  total flux cleaned = -0.000264379 Jy
! Total flux subtracted in 4096 components = -0.000247471 Jy
! Clean residual min=-0.000370 max=0.000414 Jy/beam
! Clean residual mean=0.000000 rms=0.000094 Jy/beam
! Combined flux in latest and established models = 0.0649103 Jy
keep
! Adding 262 model components to the UV plane model.
! The established model now contains 413 components and 0.0649102 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a1_uvs/J0552-0605_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9236 x 2.323 at 0.8767 degrees (North through East)
! Clean map  min=-0.00079425  max=0.034934 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a1_uvs/J0552-0605_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0349339 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.02443e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.774986 0.774986 1.54997 3.09995 6.19989 12.3998 24.7996 49.5991 99.1982
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.034 
quit
! Quitting program
! Log file /scr/pima/bp171a1_uvs/J0552-0605_X_uvs.log closed on Fri Mar 15 16:08:43 2013