! Started logfile: /scr/pima/bp171a0_uvs/J1018+0530_X_uvs.log on Fri Mar 15 12:58:13 2013
obs /scr/pima/bp171a0_uvs/J1018+0530_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a0_uvs/J1018+0530_X_uva.fits
! AN table 1: 21 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.568254 visibilities/baseline/integration-bin.
! Found source: J1018+0530
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4296 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a0_uvs/J1018+0530_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019597Jy  sigma=0.672757
! Fit after  self-cal, rms=0.862103Jy  sigma=0.565453
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.877 mas, bmaj=1.972 mas, bpa=5.742 degrees
! Estimated noise=28.1207 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103845 Jy
! Component: 100  -  total flux cleaned = 0.134848 Jy
! Total flux subtracted in 100 components = 0.134848 Jy
! Clean residual min=-0.007823 max=0.013352 Jy/beam
! Clean residual mean=0.000012 rms=0.002205 Jy/beam
! Combined flux in latest and established models = 0.134848 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.134848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045280Jy  sigma=0.029877
! Fit after  self-cal, rms=0.045235Jy  sigma=0.029851
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149221 Jy
! Component: 100  -  total flux cleaned = 0.0243788 Jy
! Total flux subtracted in 100 components = 0.0243788 Jy
! Clean residual min=-0.006086 max=0.008785 Jy/beam
! Clean residual mean=0.000006 rms=0.001521 Jy/beam
! Combined flux in latest and established models = 0.159227 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 28 components and 0.159227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038112Jy  sigma=0.024405
! Fit after  self-cal, rms=0.038080Jy  sigma=0.024387
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.097 mas, bmaj=2.317 mas, bpa=4.483 degrees
! Estimated noise=16.5814 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00935534 Jy
! Component: 100  -  total flux cleaned = 0.0148496 Jy
! Component: 150  -  total flux cleaned = 0.0182532 Jy
! Component: 200  -  total flux cleaned = 0.0204103 Jy
! Total flux subtracted in 200 components = 0.0204103 Jy
! Clean residual min=-0.004323 max=0.005885 Jy/beam
! Clean residual mean=0.000003 rms=0.001256 Jy/beam
! Combined flux in latest and established models = 0.179637 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 48 components and 0.179637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035661Jy  sigma=0.022684
! Fit after  self-cal, rms=0.035641Jy  sigma=0.022668
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.00     HN        0.87     KP        1.01     
!   LA        0.98     MK        1.23     NL        1.05     OV        1.01     
!   PT        0.90     SC        0.94     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        0.92     HN        0.86     KP        1.03     
!   LA        0.96     MK        1.26     NL        1.04     OV        0.95     
!   PT        0.92     SC        0.95     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.99     HN        0.88     KP        1.18     
!   LA        0.92     MK        1.22     NL        1.06     OV        0.99     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        0.96     KP        1.00     
!   LA        0.96     MK        1.29     NL        0.99     OV        0.98     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.91     HN        0.97     KP        1.15     
!   LA        0.94     MK        1.11     NL        0.95     OV        0.97     
!   PT        0.92     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.93     HN        1.00     KP        1.12     
!   LA        0.98     MK        1.21     NL        0.99     OV        1.01     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.94     HN        0.95     KP        1.11     
!   LA        0.94     MK        1.19     NL        1.02     OV        1.04     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.25     FD        0.94     HN        0.96     KP        1.20     
!   LA        0.90     MK        1.23     NL        1.00     OV        1.01     
!   PT        0.90     SC        1.14     
! 
! 
! Fit before self-cal, rms=0.035641Jy  sigma=0.022668
! Fit after  self-cal, rms=0.033498Jy  sigma=0.019909
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.116 mas, bmaj=2.377 mas, bpa=5.625 degrees
! Estimated noise=16.8061 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00204495 Jy
! Component: 100  -  total flux cleaned = -0.00229481 Jy
! Component: 150  -  total flux cleaned = -0.00244905 Jy
! Component: 200  -  total flux cleaned = -0.00261704 Jy
! Total flux subtracted in 200 components = -0.00261704 Jy
! Clean residual min=-0.002299 max=0.002237 Jy/beam
! Clean residual mean=-0.000002 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.17702 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 57 components and 0.17702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033236Jy  sigma=0.019755
! Fit after  self-cal, rms=0.033264Jy  sigma=0.019748
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033264Jy  sigma=0.019748
! Fit after  self-cal, rms=0.033746Jy  sigma=0.019722
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.121 mas, bmaj=2.387 mas, bpa=5.933 degrees
! Estimated noise=16.8302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00120145 Jy
! Component: 100  -  total flux cleaned = -0.00146473 Jy
! Component: 150  -  total flux cleaned = -0.00168368 Jy
! Component: 200  -  total flux cleaned = -0.0017806 Jy
! Total flux subtracted in 200 components = -0.0017806 Jy
! Clean residual min=-0.002128 max=0.002178 Jy/beam
! Clean residual mean=-0.000002 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.175239 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 63 components and 0.175239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033613Jy  sigma=0.019657
! Fit after  self-cal, rms=0.033613Jy  sigma=0.019656
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-36, -25.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184904 Jy
! Component: 100  -  total flux cleaned = 0.00234976 Jy
! Component: 150  -  total flux cleaned = 0.00265834 Jy
! Component: 200  -  total flux cleaned = 0.00277715 Jy
! Total flux subtracted in 200 components = 0.00277715 Jy
! Clean residual min=-0.001865 max=0.001504 Jy/beam
! Clean residual mean=0.000000 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.178017 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 83 components and 0.178017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033479Jy  sigma=0.019572
! Fit after  self-cal, rms=0.033475Jy  sigma=0.019570
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033475Jy  sigma=0.019570
! Fit after  self-cal, rms=0.033835Jy  sigma=0.019554
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.124 mas, bmaj=2.394 mas, bpa=6.171 degrees
! Estimated noise=16.8477 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000683512 Jy
! Component: 100  -  total flux cleaned = -0.000753291 Jy
! Component: 150  -  total flux cleaned = -0.000876066 Jy
! Component: 200  -  total flux cleaned = -0.000958996 Jy
! Total flux subtracted in 200 components = -0.000958996 Jy
! Clean residual min=-0.001742 max=0.001365 Jy/beam
! Clean residual mean=0.000000 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.177058 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 86 components and 0.177057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033747Jy  sigma=0.019517
! Fit after  self-cal, rms=0.033747Jy  sigma=0.019516
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.70054e-05 Jy
! Component: 100  -  total flux cleaned = -5.19605e-05 Jy
! Component: 150  -  total flux cleaned = -9.92049e-05 Jy
! Component: 200  -  total flux cleaned = -0.000121157 Jy
! Total flux subtracted in 200 components = -0.000121157 Jy
! Clean residual min=-0.001726 max=0.001367 Jy/beam
! Clean residual mean=0.000001 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.176936 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 90 components and 0.176936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033698Jy  sigma=0.019501
! Fit after  self-cal, rms=0.033697Jy  sigma=0.019500
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033697Jy  sigma=0.019500
! Fit after  self-cal, rms=0.033982Jy  sigma=0.019492
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.244 mas, bmaj=3.425 mas, bpa=-6.416 degrees
! Estimated noise=19.3908 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000296422 Jy
! Component: 100  -  total flux cleaned = -0.000394055 Jy
! Component: 150  -  total flux cleaned = -0.000440317 Jy
! Component: 200  -  total flux cleaned = -0.000479763 Jy
! Total flux subtracted in 200 components = -0.000479763 Jy
! Clean residual min=-0.001461 max=0.001349 Jy/beam
! Clean residual mean=0.000002 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.176457 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 103 components and 0.176457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033964Jy  sigma=0.019481
! Fit after  self-cal, rms=0.033962Jy  sigma=0.019479
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000144389 Jy
! Component: 100  -  total flux cleaned = -0.000109488 Jy
! Component: 150  -  total flux cleaned = -0.000109662 Jy
! Component: 200  -  total flux cleaned = -0.000109753 Jy
! Total flux subtracted in 200 components = -0.000109753 Jy
! Clean residual min=-0.001451 max=0.001320 Jy/beam
! Clean residual mean=0.000002 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.176347 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 113 components and 0.176347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033955Jy  sigma=0.019476
! Fit after  self-cal, rms=0.033953Jy  sigma=0.019475
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.127 mas, bmaj=2.4 mas, bpa=6.356 degrees
! Estimated noise=16.8543 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.127 x 2.4 at 6.356 degrees (North through East)
! Clean map  min=-0.0016093  max=0.14284 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9001 mas, bmaj=2.03 mas, bpa=7.505 degrees
! Estimated noise=29.3411 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107327 Jy
! Component: 100  -  total flux cleaned = 0.135303 Jy
! Component: 150  -  total flux cleaned = 0.148044 Jy
! Component: 200  -  total flux cleaned = 0.155747 Jy
! Total flux subtracted in 200 components = 0.155747 Jy
! Clean residual min=-0.003026 max=0.004372 Jy/beam
! Clean residual mean=0.000004 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.155747 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.155747 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.127 mas, bmaj=2.4 mas, bpa=6.356 degrees
! Estimated noise=16.8543 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0075171 Jy
! Component: 100  -  total flux cleaned = 0.0115898 Jy
! Component: 150  -  total flux cleaned = 0.0140842 Jy
! Component: 200  -  total flux cleaned = 0.0158957 Jy
! Total flux subtracted in 200 components = 0.0158957 Jy
! Clean residual min=-0.001655 max=0.001792 Jy/beam
! Clean residual mean=0.000000 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.171643 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 47 components and 0.171643 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.244 mas, bmaj=3.425 mas, bpa=-6.416 degrees
! Estimated noise=19.3908 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199108 Jy
! Component: 100  -  total flux cleaned = 0.0030188 Jy
! Component: 150  -  total flux cleaned = 0.00341258 Jy
! Component: 200  -  total flux cleaned = 0.0037151 Jy
! Total flux subtracted in 200 components = 0.0037151 Jy
! Clean residual min=-0.001676 max=0.001348 Jy/beam
! Clean residual mean=0.000001 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.175358 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026321 Jy
! Component: 100  -  total flux cleaned = 0.000473753 Jy
! Component: 150  -  total flux cleaned = 0.000628939 Jy
! Component: 200  -  total flux cleaned = 0.000709022 Jy
! Total flux subtracted in 200 components = 0.000709022 Jy
! Clean residual min=-0.001582 max=0.001337 Jy/beam
! Clean residual mean=0.000002 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.176067 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 79 components and 0.176067 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.127 mas, bmaj=2.4 mas, bpa=6.356 degrees
! Estimated noise=16.8543 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000254124 Jy
! Component: 100  -  total flux cleaned = -0.000166642 Jy
! Component: 150  -  total flux cleaned = -8.8937e-05 Jy
! Component: 200  -  total flux cleaned = 1.5999e-06 Jy
! Total flux subtracted in 200 components = 1.5999e-06 Jy
! Clean residual min=-0.001515 max=0.001259 Jy/beam
! Clean residual mean=0.000001 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.176069 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 95 components and 0.176069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033805Jy  sigma=0.019452
! Fit after  self-cal, rms=0.033790Jy  sigma=0.019450
wmodel /scr/pima/bp171a0_uvs/J1018+0530_X_map.mod
! Writing 95 model components to file: /scr/pima/bp171a0_uvs/J1018+0530_X_map.mod
wobs /scr/pima/bp171a0_uvs/J1018+0530_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a0_uvs/J1018+0530_X_uvs.fits
wwins /scr/pima/bp171a0_uvs/J1018+0530_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a0_uvs/J1018+0530_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000579364 Jy
! Component: 100  -  total flux cleaned = -0.000650246 Jy
! Component: 150  -  total flux cleaned = -0.000695086 Jy
! Component: 200  -  total flux cleaned = -0.000674422 Jy
! Component: 250  -  total flux cleaned = -0.000654517 Jy
! Component: 300  -  total flux cleaned = -0.00057756 Jy
! Component: 350  -  total flux cleaned = -0.000522096 Jy
! Component: 400  -  total flux cleaned = -0.000469129 Jy
! Component: 450  -  total flux cleaned = -0.000521081 Jy
! Component: 500  -  total flux cleaned = -0.000521491 Jy
! Component: 550  -  total flux cleaned = -0.000538378 Jy
! Component: 600  -  total flux cleaned = -0.000617216 Jy
! Component: 650  -  total flux cleaned = -0.000602004 Jy
! Component: 700  -  total flux cleaned = -0.000587228 Jy
! Component: 750  -  total flux cleaned = -0.000616477 Jy
! Component: 800  -  total flux cleaned = -0.000559586 Jy
! Component: 850  -  total flux cleaned = -0.000490429 Jy
! Component: 900  -  total flux cleaned = -0.000463991 Jy
! Component: 950  -  total flux cleaned = -0.000464404 Jy
! Component: 1000  -  total flux cleaned = -0.000477228 Jy
! Component: 1050  -  total flux cleaned = -0.000489406 Jy
! Component: 1100  -  total flux cleaned = -0.000452343 Jy
! Component: 1150  -  total flux cleaned = -0.000500809 Jy
! Component: 1200  -  total flux cleaned = -0.0004651 Jy
! Component: 1250  -  total flux cleaned = -0.000476745 Jy
! Component: 1300  -  total flux cleaned = -0.000487966 Jy
! Component: 1350  -  total flux cleaned = -0.000454203 Jy
! Component: 1400  -  total flux cleaned = -0.000476542 Jy
! Component: 1450  -  total flux cleaned = -0.000454554 Jy
! Component: 1500  -  total flux cleaned = -0.000454534 Jy
! Component: 1550  -  total flux cleaned = -0.000465495 Jy
! Component: 1600  -  total flux cleaned = -0.000465715 Jy
! Component: 1650  -  total flux cleaned = -0.000466006 Jy
! Component: 1700  -  total flux cleaned = -0.000455889 Jy
! Component: 1750  -  total flux cleaned = -0.000476142 Jy
! Component: 1800  -  total flux cleaned = -0.00050601 Jy
! Component: 1850  -  total flux cleaned = -0.000486382 Jy
! Component: 1900  -  total flux cleaned = -0.000486429 Jy
! Component: 1950  -  total flux cleaned = -0.000505608 Jy
! Component: 2000  -  total flux cleaned = -0.000496129 Jy
! Component: 2050  -  total flux cleaned = -0.000486569 Jy
! Component: 2100  -  total flux cleaned = -0.000486585 Jy
! Component: 2150  -  total flux cleaned = -0.000495765 Jy
! Component: 2200  -  total flux cleaned = -0.000486669 Jy
! Component: 2250  -  total flux cleaned = -0.000495691 Jy
! Component: 2300  -  total flux cleaned = -0.000477734 Jy
! Component: 2350  -  total flux cleaned = -0.000468956 Jy
! Component: 2400  -  total flux cleaned = -0.000460112 Jy
! Component: 2450  -  total flux cleaned = -0.000442661 Jy
! Component: 2500  -  total flux cleaned = -0.000442683 Jy
! Component: 2550  -  total flux cleaned = -0.000434059 Jy
! Component: 2600  -  total flux cleaned = -0.000408586 Jy
! Component: 2650  -  total flux cleaned = -0.000383501 Jy
! Component: 2700  -  total flux cleaned = -0.000366975 Jy
! Component: 2750  -  total flux cleaned = -0.000358695 Jy
! Component: 2800  -  total flux cleaned = -0.000342366 Jy
! Component: 2850  -  total flux cleaned = -0.000309935 Jy
! Component: 2900  -  total flux cleaned = -0.000301993 Jy
! Component: 2950  -  total flux cleaned = -0.000262053 Jy
! Component: 3000  -  total flux cleaned = -0.000222526 Jy
! Component: 3050  -  total flux cleaned = -0.000199055 Jy
! Component: 3100  -  total flux cleaned = -0.000175723 Jy
! Component: 3150  -  total flux cleaned = -0.000121738 Jy
! Component: 3200  -  total flux cleaned = -0.000106492 Jy
! Component: 3250  -  total flux cleaned = -6.84175e-05 Jy
! Component: 3300  -  total flux cleaned = -4.57751e-05 Jy
! Component: 3350  -  total flux cleaned = -7.94454e-07 Jy
! Component: 3400  -  total flux cleaned = 4.3864e-05 Jy
! Component: 3450  -  total flux cleaned = 8.82134e-05 Jy
! Component: 3500  -  total flux cleaned = 9.55388e-05 Jy
! Component: 3550  -  total flux cleaned = 0.000139355 Jy
! Component: 3600  -  total flux cleaned = 0.000146609 Jy
! Component: 3650  -  total flux cleaned = 0.000153826 Jy
! Component: 3700  -  total flux cleaned = 0.000189639 Jy
! Component: 3750  -  total flux cleaned = 0.000196745 Jy
! Component: 3800  -  total flux cleaned = 0.000239209 Jy
! Component: 3850  -  total flux cleaned = 0.000246265 Jy
! Component: 3900  -  total flux cleaned = 0.000274235 Jy
! Component: 3950  -  total flux cleaned = 0.000295109 Jy
! Component: 4000  -  total flux cleaned = 0.000308942 Jy
! Component: 4050  -  total flux cleaned = 0.000329507 Jy
! Total flux subtracted in 4096 components = 0.000322706 Jy
! Clean residual min=-0.000408 max=0.000447 Jy/beam
! Clean residual mean=-0.000000 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.176391 Jy
keep
! Adding 243 model components to the UV plane model.
! The established model now contains 338 components and 0.176391 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a0_uvs/J1018+0530_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.127 x 2.4 at 6.356 degrees (North through East)
! Clean map  min=-0.00075328  max=0.14364 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a0_uvs/J1018+0530_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.143636 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000113192 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.236413 0.236413 0.472825 0.945651 1.8913 3.7826 7.56521 15.1304 30.2608 60.5216
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.143 
quit
! Quitting program
! Log file /scr/pima/bp171a0_uvs/J1018+0530_X_uvs.log closed on Fri Mar 15 12:58:17 2013