! Started logfile: /scr/pima/bp171a0_uvs/J0948-3440_X_uvs.log on Fri Mar 15 12:57:52 2013
obs /scr/pima/bp171a0_uvs/J0948-3440_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a0_uvs/J0948-3440_X_uva.fits
! AN table 1: 13 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.647436 visibilities/baseline/integration-bin.
! Found source: J0948-3440
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2424 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a0_uvs/J0948-3440_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007144Jy  sigma=0.678709
! Fit after  self-cal, rms=0.963425Jy  sigma=0.648786
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9001 mas, bmaj=2.156 mas, bpa=-3.316 degrees
! Estimated noise=37.5709 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0274019 Jy
! Component: 100  -  total flux cleaned = 0.0367347 Jy
! Total flux subtracted in 100 components = 0.0367347 Jy
! Clean residual min=-0.004991 max=0.005618 Jy/beam
! Clean residual mean=-0.000010 rms=0.001388 Jy/beam
! Combined flux in latest and established models = 0.0367347 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0367347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042598Jy  sigma=0.028348
! Fit after  self-cal, rms=0.039670Jy  sigma=0.026297
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00706794 Jy
! Component: 100  -  total flux cleaned = 0.0102823 Jy
! Total flux subtracted in 100 components = 0.0102823 Jy
! Clean residual min=-0.004085 max=0.004648 Jy/beam
! Clean residual mean=-0.000008 rms=0.001144 Jy/beam
! Combined flux in latest and established models = 0.0470169 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 29 components and 0.0470169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038425Jy  sigma=0.025357
! Fit after  self-cal, rms=0.038430Jy  sigma=0.025353
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=2.676 mas, bpa=-2.911 degrees
! Estimated noise=21.5693 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00298028 Jy
! Component: 100  -  total flux cleaned = 0.00464137 Jy
! Component: 150  -  total flux cleaned = 0.00540532 Jy
! Component: 200  -  total flux cleaned = 0.00561185 Jy
! Total flux subtracted in 200 components = 0.00561185 Jy
! Clean residual min=-0.003155 max=0.003504 Jy/beam
! Clean residual mean=-0.000010 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.0526288 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 38 components and 0.0526288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038212Jy  sigma=0.025187
! Fit after  self-cal, rms=0.038202Jy  sigma=0.025175
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     HN        0.99     KP        1.02     LA        1.03     
!   MK        0.91     NL        1.02     OV        1.05     PT        0.98     
!   SC        1.12     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.06     KP        0.94     LA        1.06     
!   MK        1.03     NL        1.03     OV        1.11     PT        0.89     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        1.05     KP        1.05     LA        0.97     
!   MK        1.12     NL        1.18     OV        1.09     PT        0.92     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.15     HN        1.01     KP        0.98     LA        0.85     
!   MK        1.21     NL        0.99     OV        1.00     PT        1.00     
!   SC        1.17     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     HN        1.14     KP        1.09     LA        0.85     
!   MK        1.04     NL        1.11     OV        1.14     PT        0.92     
!   SC        0.92     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.08     KP        1.12     LA        0.99     
!   MK        1.26     NL        1.10     OV        1.01     PT        0.94     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.21     KP        1.27     LA        0.86     
!   MK        1.04     NL        1.02     OV        1.06     PT        0.90     
!   SC        1.05     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        0.85     KP        1.09     LA        0.87     
!   MK        0.99     NL        1.08     OV        0.92     PT        0.92     
!   SC        1.19     
! 
! 
! Fit before self-cal, rms=0.038202Jy  sigma=0.025175
! Fit after  self-cal, rms=0.039449Jy  sigma=0.024718
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=2.717 mas, bpa=-3.16 degrees
! Estimated noise=22.1296 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000257486 Jy
! Component: 100  -  total flux cleaned = 0.000281868 Jy
! Component: 150  -  total flux cleaned = 0.000304989 Jy
! Component: 200  -  total flux cleaned = 0.000337447 Jy
! Total flux subtracted in 200 components = 0.000337447 Jy
! Clean residual min=-0.002823 max=0.002989 Jy/beam
! Clean residual mean=-0.000003 rms=0.000719 Jy/beam
! Combined flux in latest and established models = 0.0529662 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 43 components and 0.0529662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039441Jy  sigma=0.024713
! Fit after  self-cal, rms=0.039526Jy  sigma=0.024695
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039526Jy  sigma=0.024695
! Fit after  self-cal, rms=0.039739Jy  sigma=0.024693
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=2.717 mas, bpa=-3.112 degrees
! Estimated noise=22.179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122064 Jy
! Component: 100  -  total flux cleaned = 0.000148877 Jy
! Component: 150  -  total flux cleaned = 0.00016578 Jy
! Component: 200  -  total flux cleaned = 0.000174026 Jy
! Total flux subtracted in 200 components = 0.000174026 Jy
! Clean residual min=-0.002851 max=0.002933 Jy/beam
! Clean residual mean=-0.000003 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.0531403 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 48 components and 0.0531403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039735Jy  sigma=0.024691
! Fit after  self-cal, rms=0.039748Jy  sigma=0.024690
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.81743e-06 Jy
! Component: 100  -  total flux cleaned = 1.75766e-05 Jy
! Component: 150  -  total flux cleaned = 3.31602e-05 Jy
! Component: 200  -  total flux cleaned = 4.06496e-05 Jy
! Total flux subtracted in 200 components = 4.06496e-05 Jy
! Clean residual min=-0.002851 max=0.002911 Jy/beam
! Clean residual mean=-0.000003 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.0531809 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 49 components and 0.0531809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039744Jy  sigma=0.024688
! Fit after  self-cal, rms=0.039744Jy  sigma=0.024688
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039744Jy  sigma=0.024688
! Fit after  self-cal, rms=0.039828Jy  sigma=0.024688
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.114 mas, bmaj=2.72 mas, bpa=-3.114 degrees
! Estimated noise=22.2171 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.89293e-05 Jy
! Component: 100  -  total flux cleaned = 9.20861e-05 Jy
! Component: 150  -  total flux cleaned = 9.96053e-05 Jy
! Component: 200  -  total flux cleaned = 0.000113834 Jy
! Total flux subtracted in 200 components = 0.000113834 Jy
! Clean residual min=-0.002854 max=0.002909 Jy/beam
! Clean residual mean=-0.000003 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.0532947 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 51 components and 0.0532947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039825Jy  sigma=0.024687
! Fit after  self-cal, rms=0.039827Jy  sigma=0.024686
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.42231e-05 Jy
! Component: 100  -  total flux cleaned = 2.14188e-05 Jy
! Component: 150  -  total flux cleaned = 2.12921e-05 Jy
! Component: 200  -  total flux cleaned = 2.11629e-05 Jy
! Total flux subtracted in 200 components = 2.11629e-05 Jy
! Clean residual min=-0.002868 max=0.002893 Jy/beam
! Clean residual mean=-0.000003 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.0533159 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 53 components and 0.0533159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039825Jy  sigma=0.024685
! Fit after  self-cal, rms=0.039825Jy  sigma=0.024685
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039825Jy  sigma=0.024685
! Fit after  self-cal, rms=0.039903Jy  sigma=0.024685
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.177 mas, bmaj=5.856 mas, bpa=-3.419 degrees
! Estimated noise=26.0904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000427365 Jy
! Component: 100  -  total flux cleaned = 0.000413979 Jy
! Component: 150  -  total flux cleaned = 0.000403149 Jy
! Component: 200  -  total flux cleaned = 0.000402884 Jy
! Total flux subtracted in 200 components = 0.000402884 Jy
! Clean residual min=-0.003590 max=0.003659 Jy/beam
! Clean residual mean=-0.000005 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 0.0537188 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 54 components and 0.0537188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039906Jy  sigma=0.024688
! Fit after  self-cal, rms=0.039903Jy  sigma=0.024684
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.58437e-05 Jy
! Component: 100  -  total flux cleaned = 6.46623e-05 Jy
! Component: 150  -  total flux cleaned = 5.56966e-05 Jy
! Component: 200  -  total flux cleaned = 6.24692e-05 Jy
! Total flux subtracted in 200 components = 6.24692e-05 Jy
! Clean residual min=-0.003568 max=0.003622 Jy/beam
! Clean residual mean=-0.000005 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 0.0537813 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 55 components and 0.0537813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039909Jy  sigma=0.024688
! Fit after  self-cal, rms=0.039906Jy  sigma=0.024685
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.115 mas, bmaj=2.724 mas, bpa=-3.128 degrees
! Estimated noise=22.2564 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.115 x 2.724 at -3.128 degrees (North through East)
! Clean map  min=-0.0027944  max=0.03988 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.906 mas, bmaj=2.177 mas, bpa=-3.401 degrees
! Estimated noise=39.3341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0316991 Jy
! Component: 100  -  total flux cleaned = 0.0409456 Jy
! Component: 150  -  total flux cleaned = 0.0458261 Jy
! Component: 200  -  total flux cleaned = 0.0487577 Jy
! Total flux subtracted in 200 components = 0.0487577 Jy
! Clean residual min=-0.004235 max=0.004306 Jy/beam
! Clean residual mean=-0.000005 rms=0.001181 Jy/beam
! Combined flux in latest and established models = 0.0487577 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.0487577 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.115 mas, bmaj=2.724 mas, bpa=-3.128 degrees
! Estimated noise=22.2564 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212686 Jy
! Component: 100  -  total flux cleaned = 0.00318591 Jy
! Component: 150  -  total flux cleaned = 0.0033596 Jy
! Component: 200  -  total flux cleaned = 0.00351316 Jy
! Total flux subtracted in 200 components = 0.00351316 Jy
! Clean residual min=-0.003091 max=0.003013 Jy/beam
! Clean residual mean=-0.000005 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.0522708 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 44 components and 0.0522708 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.177 mas, bmaj=5.856 mas, bpa=-3.419 degrees
! Estimated noise=26.0904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000962911 Jy
! Component: 100  -  total flux cleaned = 0.000964572 Jy
! Component: 150  -  total flux cleaned = 0.000998243 Jy
! Component: 200  -  total flux cleaned = 0.00104471 Jy
! Total flux subtracted in 200 components = 0.00104471 Jy
! Clean residual min=-0.003666 max=0.003704 Jy/beam
! Clean residual mean=-0.000006 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.0533155 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.6675e-05 Jy
! Component: 100  -  total flux cleaned = 9.61391e-05 Jy
! Component: 150  -  total flux cleaned = 0.000133088 Jy
! Component: 200  -  total flux cleaned = 0.000167613 Jy
! Total flux subtracted in 200 components = 0.000167613 Jy
! Clean residual min=-0.003636 max=0.003684 Jy/beam
! Clean residual mean=-0.000006 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 0.0534831 Jy
! Adding 5 model components to the UV plane model.
! The established model now contains 48 components and 0.0534831 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.115 mas, bmaj=2.724 mas, bpa=-3.128 degrees
! Estimated noise=22.2564 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000245906 Jy
! Component: 100  -  total flux cleaned = -0.000221969 Jy
! Component: 150  -  total flux cleaned = -0.000157368 Jy
! Component: 200  -  total flux cleaned = -0.000142992 Jy
! Total flux subtracted in 200 components = -0.000142992 Jy
! Clean residual min=-0.002951 max=0.002970 Jy/beam
! Clean residual mean=-0.000003 rms=0.000721 Jy/beam
! Combined flux in latest and established models = 0.0533402 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 55 components and 0.0533402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039900Jy  sigma=0.024690
! Fit after  self-cal, rms=0.039895Jy  sigma=0.024686
wmodel /scr/pima/bp171a0_uvs/J0948-3440_X_map.mod
! Writing 55 model components to file: /scr/pima/bp171a0_uvs/J0948-3440_X_map.mod
wobs /scr/pima/bp171a0_uvs/J0948-3440_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a0_uvs/J0948-3440_X_uvs.fits
wwins /scr/pima/bp171a0_uvs/J0948-3440_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bp171a0_uvs/J0948-3440_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000135344 Jy
! Component: 100  -  total flux cleaned = 3.66785e-06 Jy
! Component: 150  -  total flux cleaned = -7.42674e-05 Jy
! Component: 200  -  total flux cleaned = -0.000187203 Jy
! Component: 250  -  total flux cleaned = -0.000186784 Jy
! Component: 300  -  total flux cleaned = 2.28698e-06 Jy
! Component: 350  -  total flux cleaned = 0.000120809 Jy
! Component: 400  -  total flux cleaned = 0.000346526 Jy
! Component: 450  -  total flux cleaned = 0.000559781 Jy
! Component: 500  -  total flux cleaned = 0.000737178 Jy
! Component: 550  -  total flux cleaned = 0.000834163 Jy
! Component: 600  -  total flux cleaned = 0.000949432 Jy
! Component: 650  -  total flux cleaned = 0.000971249 Jy
! Component: 700  -  total flux cleaned = 0.00101441 Jy
! Component: 750  -  total flux cleaned = 0.00105554 Jy
! Component: 800  -  total flux cleaned = 0.00105526 Jy
! Component: 850  -  total flux cleaned = 0.00107391 Jy
! Component: 900  -  total flux cleaned = 0.00107456 Jy
! Component: 950  -  total flux cleaned = 0.00112821 Jy
! Component: 1000  -  total flux cleaned = 0.00116277 Jy
! Component: 1050  -  total flux cleaned = 0.00121249 Jy
! Component: 1100  -  total flux cleaned = 0.00119576 Jy
! Component: 1150  -  total flux cleaned = 0.00121124 Jy
! Component: 1200  -  total flux cleaned = 0.00116524 Jy
! Component: 1250  -  total flux cleaned = 0.00113526 Jy
! Component: 1300  -  total flux cleaned = 0.00113562 Jy
! Component: 1350  -  total flux cleaned = 0.0010926 Jy
! Component: 1400  -  total flux cleaned = 0.00106464 Jy
! Component: 1450  -  total flux cleaned = 0.00102345 Jy
! Component: 1500  -  total flux cleaned = 0.000983049 Jy
! Component: 1550  -  total flux cleaned = 0.000956745 Jy
! Component: 1600  -  total flux cleaned = 0.000943787 Jy
! Component: 1650  -  total flux cleaned = 0.000918466 Jy
! Component: 1700  -  total flux cleaned = 0.000930913 Jy
! Component: 1750  -  total flux cleaned = 0.000943111 Jy
! Component: 1800  -  total flux cleaned = 0.000955054 Jy
! Component: 1850  -  total flux cleaned = 0.000978404 Jy
! Component: 1900  -  total flux cleaned = 0.000978335 Jy
! Component: 1950  -  total flux cleaned = 0.00100129 Jy
! Component: 2000  -  total flux cleaned = 0.00103522 Jy
! Component: 2050  -  total flux cleaned = 0.00107948 Jy
! Component: 2100  -  total flux cleaned = 0.00109025 Jy
! Component: 2150  -  total flux cleaned = 0.00112256 Jy
! Component: 2200  -  total flux cleaned = 0.00113304 Jy
! Component: 2250  -  total flux cleaned = 0.00115402 Jy
! Component: 2300  -  total flux cleaned = 0.00115401 Jy
! Component: 2350  -  total flux cleaned = 0.00120545 Jy
! Component: 2400  -  total flux cleaned = 0.00123597 Jy
! Component: 2450  -  total flux cleaned = 0.00125614 Jy
! Component: 2500  -  total flux cleaned = 0.00129595 Jy
! Component: 2550  -  total flux cleaned = 0.00131561 Jy
! Component: 2600  -  total flux cleaned = 0.00133511 Jy
! Component: 2650  -  total flux cleaned = 0.0013641 Jy
! Component: 2700  -  total flux cleaned = 0.00140238 Jy
! Component: 2750  -  total flux cleaned = 0.00142132 Jy
! Component: 2800  -  total flux cleaned = 0.00144016 Jy
! Component: 2850  -  total flux cleaned = 0.00147735 Jy
! Component: 2900  -  total flux cleaned = 0.00150492 Jy
! Component: 2950  -  total flux cleaned = 0.001514 Jy
! Component: 3000  -  total flux cleaned = 0.00154114 Jy
! Component: 3050  -  total flux cleaned = 0.0015501 Jy
! Component: 3100  -  total flux cleaned = 0.00155013 Jy
! Component: 3150  -  total flux cleaned = 0.00156787 Jy
! Component: 3200  -  total flux cleaned = 0.00157664 Jy
! Component: 3250  -  total flux cleaned = 0.00160277 Jy
! Component: 3300  -  total flux cleaned = 0.00161139 Jy
! Component: 3350  -  total flux cleaned = 0.00161146 Jy
! Component: 3400  -  total flux cleaned = 0.0016457 Jy
! Component: 3450  -  total flux cleaned = 0.00164572 Jy
! Component: 3500  -  total flux cleaned = 0.0016542 Jy
! Component: 3550  -  total flux cleaned = 0.00166261 Jy
! Component: 3600  -  total flux cleaned = 0.00167935 Jy
! Component: 3650  -  total flux cleaned = 0.001671 Jy
! Component: 3700  -  total flux cleaned = 0.00167936 Jy
! Component: 3750  -  total flux cleaned = 0.00170417 Jy
! Component: 3800  -  total flux cleaned = 0.00170415 Jy
! Component: 3850  -  total flux cleaned = 0.00170415 Jy
! Component: 3900  -  total flux cleaned = 0.0017205 Jy
! Component: 3950  -  total flux cleaned = 0.00167155 Jy
! Component: 4000  -  total flux cleaned = 0.00166345 Jy
! Component: 4050  -  total flux cleaned = 0.00166348 Jy
! Total flux subtracted in 4096 components = 0.00167158 Jy
! Clean residual min=-0.000486 max=0.000454 Jy/beam
! Clean residual mean=0.000001 rms=0.000138 Jy/beam
! Combined flux in latest and established models = 0.0550117 Jy
keep
! Adding 255 model components to the UV plane model.
! The established model now contains 310 components and 0.0550118 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a0_uvs/J0948-3440_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.115 x 2.724 at -3.128 degrees (North through East)
! Clean map  min=-0.0011478  max=0.040427 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a0_uvs/J0948-3440_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0404267 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000136992 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.0166 1.0166 2.03319 4.06638 8.13276 16.2655 32.5311 65.0621
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.04 
quit
! Quitting program
! Log file /scr/pima/bp171a0_uvs/J0948-3440_X_uvs.log closed on Fri Mar 15 12:57:56 2013