! Started logfile: /scr/pima/bp171a0_uvs/J0655-230A_X_uvs.log on Fri Mar 15 12:54:41 2013
obs /scr/pima/bp171a0_uvs/J0655-230A_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a0_uvs/J0655-230A_X_uva.fits
! AN table 1: 20 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.620833 visibilities/baseline/integration-bin.
! Found source: J0655-230A
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3576 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a0_uvs/J0655-230A_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006521Jy  sigma=0.674625
! Fit after  self-cal, rms=0.951932Jy  sigma=0.635545
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8064 mas, bmaj=1.978 mas, bpa=8.006 degrees
! Estimated noise=27.2272 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0347686 Jy
! Component: 100  -  total flux cleaned = 0.0457463 Jy
! Total flux subtracted in 100 components = 0.0457463 Jy
! Clean residual min=-0.003647 max=0.005418 Jy/beam
! Clean residual mean=-0.000000 rms=0.001008 Jy/beam
! Combined flux in latest and established models = 0.0457463 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0457463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039342Jy  sigma=0.026481
! Fit after  self-cal, rms=0.036803Jy  sigma=0.024781
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.007688 Jy
! Component: 100  -  total flux cleaned = 0.0123049 Jy
! Total flux subtracted in 100 components = 0.0123049 Jy
! Clean residual min=-0.002505 max=0.003264 Jy/beam
! Clean residual mean=-0.000001 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.0580512 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 29 components and 0.0580512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034410Jy  sigma=0.022996
! Fit after  self-cal, rms=0.034398Jy  sigma=0.022986
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9847 mas, bmaj=2.326 mas, bpa=6.966 degrees
! Estimated noise=17.8386 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00478492 Jy
! Component: 100  -  total flux cleaned = 0.00719893 Jy
! Component: 150  -  total flux cleaned = 0.00854125 Jy
! Component: 200  -  total flux cleaned = 0.00936313 Jy
! Total flux subtracted in 200 components = 0.00936313 Jy
! Clean residual min=-0.001941 max=0.002420 Jy/beam
! Clean residual mean=-0.000005 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.0674143 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 46 components and 0.0674143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033810Jy  sigma=0.022548
! Fit after  self-cal, rms=0.033808Jy  sigma=0.022545
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.26     FD        1.02     HN        0.92     LA        1.08     
!   MK        1.03     NL        1.14     OV        0.95     PT        0.84     
!   SC        0.94     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        0.98     HN        1.11     LA        0.90     
!   MK        1.20     NL        1.05     OV        0.95     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.03     HN        1.00     LA        0.89     
!   MK        1.06     NL        1.09     OV        1.01     PT        0.94     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        1.00     HN        1.05     LA        1.00     
!   MK        1.09     NL        1.03     OV        0.93     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.09     LA        0.89     
!   MK        0.91     NL        1.00     OV        1.00     PT        0.97     
!   SC        0.94     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.90     HN        1.13     LA        0.99     
!   MK        1.17     NL        1.09     OV        0.94     PT        0.96     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.90     HN        1.03     LA        0.90     
!   MK        0.98     NL        1.02     OV        0.96     PT        0.99     
!   SC        1.10     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.33     FD        0.95     HN        1.05     LA        0.89     
!   MK        0.95     NL        1.10     OV        0.98     PT        0.89     
!   SC        1.17     
! 
! 
! Fit before self-cal, rms=0.033808Jy  sigma=0.022545
! Fit after  self-cal, rms=0.033416Jy  sigma=0.021394
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9883 mas, bmaj=2.359 mas, bpa=6.974 degrees
! Estimated noise=18.0712 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.41501e-05 Jy
! Component: 100  -  total flux cleaned = -0.000114889 Jy
! Component: 150  -  total flux cleaned = -0.000133405 Jy
! Component: 200  -  total flux cleaned = -0.000159532 Jy
! Total flux subtracted in 200 components = -0.000159532 Jy
! Clean residual min=-0.001452 max=0.001480 Jy/beam
! Clean residual mean=-0.000000 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.0672548 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 52 components and 0.0672548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033410Jy  sigma=0.021390
! Fit after  self-cal, rms=0.033457Jy  sigma=0.021380
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033457Jy  sigma=0.021380
! Fit after  self-cal, rms=0.033544Jy  sigma=0.021379
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9888 mas, bmaj=2.362 mas, bpa=7.081 degrees
! Estimated noise=18.0738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115399 Jy
! Component: 100  -  total flux cleaned = -0.000115042 Jy
! Component: 150  -  total flux cleaned = -0.000139001 Jy
! Component: 200  -  total flux cleaned = -0.000153395 Jy
! Total flux subtracted in 200 components = -0.000153395 Jy
! Clean residual min=-0.001442 max=0.001471 Jy/beam
! Clean residual mean=-0.000000 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.0671014 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 53 components and 0.0671014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033539Jy  sigma=0.021377
! Fit after  self-cal, rms=0.033541Jy  sigma=0.021376
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.20322e-05 Jy
! Component: 100  -  total flux cleaned = -7.2184e-05 Jy
! Component: 150  -  total flux cleaned = -7.85437e-05 Jy
! Component: 200  -  total flux cleaned = -8.47034e-05 Jy
! Total flux subtracted in 200 components = -8.47034e-05 Jy
! Clean residual min=-0.001443 max=0.001463 Jy/beam
! Clean residual mean=-0.000000 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0670167 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 57 components and 0.0670167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033538Jy  sigma=0.021375
! Fit after  self-cal, rms=0.033538Jy  sigma=0.021374
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033538Jy  sigma=0.021374
! Fit after  self-cal, rms=0.033616Jy  sigma=0.021374
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9896 mas, bmaj=2.367 mas, bpa=7.248 degrees
! Estimated noise=18.0779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.63872e-05 Jy
! Component: 100  -  total flux cleaned = -0.000103419 Jy
! Component: 150  -  total flux cleaned = -0.000122517 Jy
! Component: 200  -  total flux cleaned = -0.000133619 Jy
! Total flux subtracted in 200 components = -0.000133619 Jy
! Clean residual min=-0.001441 max=0.001467 Jy/beam
! Clean residual mean=-0.000000 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.0668831 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 59 components and 0.0668831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033613Jy  sigma=0.021372
! Fit after  self-cal, rms=0.033614Jy  sigma=0.021372
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.55973e-05 Jy
! Component: 100  -  total flux cleaned = -3.54103e-05 Jy
! Component: 150  -  total flux cleaned = -3.00336e-05 Jy
! Component: 200  -  total flux cleaned = -3.01165e-05 Jy
! Total flux subtracted in 200 components = -3.01165e-05 Jy
! Clean residual min=-0.001439 max=0.001466 Jy/beam
! Clean residual mean=-0.000000 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.066853 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 60 components and 0.066853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033612Jy  sigma=0.021371
! Fit after  self-cal, rms=0.033612Jy  sigma=0.021371
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033612Jy  sigma=0.021371
! Fit after  self-cal, rms=0.033695Jy  sigma=0.021371
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.906 mas, bmaj=4.696 mas, bpa=9.182 degrees
! Estimated noise=21.9553 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.18446e-05 Jy
! Component: 100  -  total flux cleaned = 4.60056e-05 Jy
! Component: 150  -  total flux cleaned = 4.64574e-05 Jy
! Component: 200  -  total flux cleaned = 4.64251e-05 Jy
! Total flux subtracted in 200 components = 4.64251e-05 Jy
! Clean residual min=-0.001869 max=0.001870 Jy/beam
! Clean residual mean=-0.000000 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.0668994 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 62 components and 0.0668994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033695Jy  sigma=0.021371
! Fit after  self-cal, rms=0.033696Jy  sigma=0.021370
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.65154e-06 Jy
! Component: 100  -  total flux cleaned = 2.82665e-06 Jy
! Component: 150  -  total flux cleaned = -2.82076e-06 Jy
! Component: 200  -  total flux cleaned = -3.32073e-06 Jy
! Total flux subtracted in 200 components = -3.32073e-06 Jy
! Clean residual min=-0.001861 max=0.001861 Jy/beam
! Clean residual mean=-0.000001 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.0668961 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 62 components and 0.0668961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033696Jy  sigma=0.021370
! Fit after  self-cal, rms=0.033696Jy  sigma=0.021370
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9906 mas, bmaj=2.373 mas, bpa=7.405 degrees
! Estimated noise=18.0881 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9906 x 2.373 at 7.405 degrees (North through East)
! Clean map  min=-0.0013306  max=0.051934 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8077 mas, bmaj=2.005 mas, bpa=8.788 degrees
! Estimated noise=27.7709 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.036607 Jy
! Component: 100  -  total flux cleaned = 0.04826 Jy
! Component: 150  -  total flux cleaned = 0.0552328 Jy
! Component: 200  -  total flux cleaned = 0.0595193 Jy
! Total flux subtracted in 200 components = 0.0595193 Jy
! Clean residual min=-0.002174 max=0.002725 Jy/beam
! Clean residual mean=0.000001 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.0595193 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0595193 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9906 mas, bmaj=2.373 mas, bpa=7.405 degrees
! Estimated noise=18.0881 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00375755 Jy
! Component: 100  -  total flux cleaned = 0.00557738 Jy
! Component: 150  -  total flux cleaned = 0.00651035 Jy
! Component: 200  -  total flux cleaned = 0.00681794 Jy
! Total flux subtracted in 200 components = 0.00681794 Jy
! Clean residual min=-0.001439 max=0.001531 Jy/beam
! Clean residual mean=0.000000 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.0663373 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 36 components and 0.0663373 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.906 mas, bmaj=4.696 mas, bpa=9.182 degrees
! Estimated noise=21.9553 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00046707 Jy
! Component: 100  -  total flux cleaned = 0.00049275 Jy
! Component: 150  -  total flux cleaned = 0.000526016 Jy
! Component: 200  -  total flux cleaned = 0.000545318 Jy
! Total flux subtracted in 200 components = 0.000545318 Jy
! Clean residual min=-0.001857 max=0.001903 Jy/beam
! Clean residual mean=-0.000000 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.0668826 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.5279e-05 Jy
! Component: 100  -  total flux cleaned = 4.01455e-05 Jy
! Component: 150  -  total flux cleaned = 5.96547e-05 Jy
! Component: 200  -  total flux cleaned = 7.13667e-05 Jy
! Total flux subtracted in 200 components = 7.13667e-05 Jy
! Clean residual min=-0.001854 max=0.001874 Jy/beam
! Clean residual mean=-0.000001 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.0669539 Jy
! Adding 9 model components to the UV plane model.
! The established model now contains 41 components and 0.0669539 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9906 mas, bmaj=2.373 mas, bpa=7.405 degrees
! Estimated noise=18.0881 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.17284e-05 Jy
! Component: 100  -  total flux cleaned = -9.38756e-05 Jy
! Component: 150  -  total flux cleaned = -0.000112157 Jy
! Component: 200  -  total flux cleaned = -0.00013634 Jy
! Total flux subtracted in 200 components = -0.00013634 Jy
! Clean residual min=-0.001396 max=0.001495 Jy/beam
! Clean residual mean=-0.000000 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.0668176 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 48 components and 0.0668176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033696Jy  sigma=0.021371
! Fit after  self-cal, rms=0.033692Jy  sigma=0.021370
wmodel /scr/pima/bp171a0_uvs/J0655-230A_X_map.mod
! Writing 48 model components to file: /scr/pima/bp171a0_uvs/J0655-230A_X_map.mod
wobs /scr/pima/bp171a0_uvs/J0655-230A_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a0_uvs/J0655-230A_X_uvs.fits
wwins /scr/pima/bp171a0_uvs/J0655-230A_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bp171a0_uvs/J0655-230A_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000403518 Jy
! Component: 100  -  total flux cleaned = 0.000595719 Jy
! Component: 150  -  total flux cleaned = 0.000910715 Jy
! Component: 200  -  total flux cleaned = 0.00121001 Jy
! Component: 250  -  total flux cleaned = 0.00145427 Jy
! Component: 300  -  total flux cleaned = 0.00162908 Jy
! Component: 350  -  total flux cleaned = 0.0017784 Jy
! Component: 400  -  total flux cleaned = 0.00194065 Jy
! Component: 450  -  total flux cleaned = 0.00201037 Jy
! Component: 500  -  total flux cleaned = 0.00212882 Jy
! Component: 550  -  total flux cleaned = 0.00221097 Jy
! Component: 600  -  total flux cleaned = 0.00227509 Jy
! Component: 650  -  total flux cleaned = 0.00233812 Jy
! Component: 700  -  total flux cleaned = 0.00242973 Jy
! Component: 750  -  total flux cleaned = 0.00248942 Jy
! Component: 800  -  total flux cleaned = 0.00253277 Jy
! Component: 850  -  total flux cleaned = 0.00256078 Jy
! Component: 900  -  total flux cleaned = 0.00254684 Jy
! Component: 950  -  total flux cleaned = 0.00258771 Jy
! Component: 1000  -  total flux cleaned = 0.00258758 Jy
! Component: 1050  -  total flux cleaned = 0.00261354 Jy
! Component: 1100  -  total flux cleaned = 0.00265192 Jy
! Component: 1150  -  total flux cleaned = 0.00265205 Jy
! Component: 1200  -  total flux cleaned = 0.00270196 Jy
! Component: 1250  -  total flux cleaned = 0.00272643 Jy
! Component: 1300  -  total flux cleaned = 0.00277459 Jy
! Component: 1350  -  total flux cleaned = 0.00281029 Jy
! Component: 1400  -  total flux cleaned = 0.00284546 Jy
! Component: 1450  -  total flux cleaned = 0.00289182 Jy
! Component: 1500  -  total flux cleaned = 0.00291492 Jy
! Component: 1550  -  total flux cleaned = 0.00296034 Jy
! Component: 1600  -  total flux cleaned = 0.00298265 Jy
! Component: 1650  -  total flux cleaned = 0.0029603 Jy
! Component: 1700  -  total flux cleaned = 0.0029713 Jy
! Component: 1750  -  total flux cleaned = 0.0029602 Jy
! Component: 1800  -  total flux cleaned = 0.00292787 Jy
! Component: 1850  -  total flux cleaned = 0.00296009 Jy
! Component: 1900  -  total flux cleaned = 0.00292834 Jy
! Component: 1950  -  total flux cleaned = 0.0029284 Jy
! Component: 2000  -  total flux cleaned = 0.00295959 Jy
! Component: 2050  -  total flux cleaned = 0.00294925 Jy
! Component: 2100  -  total flux cleaned = 0.00298 Jy
! Component: 2150  -  total flux cleaned = 0.00296984 Jy
! Component: 2200  -  total flux cleaned = 0.00294961 Jy
! Component: 2250  -  total flux cleaned = 0.00296971 Jy
! Component: 2300  -  total flux cleaned = 0.00293967 Jy
! Component: 2350  -  total flux cleaned = 0.00293974 Jy
! Component: 2400  -  total flux cleaned = 0.0029398 Jy
! Component: 2450  -  total flux cleaned = 0.00292987 Jy
! Component: 2500  -  total flux cleaned = 0.00292001 Jy
! Component: 2550  -  total flux cleaned = 0.0029397 Jy
! Component: 2600  -  total flux cleaned = 0.00293967 Jy
! Component: 2650  -  total flux cleaned = 0.00295922 Jy
! Component: 2700  -  total flux cleaned = 0.00295931 Jy
! Component: 2750  -  total flux cleaned = 0.00296902 Jy
! Component: 2800  -  total flux cleaned = 0.00295932 Jy
! Component: 2850  -  total flux cleaned = 0.00294971 Jy
! Component: 2900  -  total flux cleaned = 0.00294977 Jy
! Component: 2950  -  total flux cleaned = 0.00293041 Jy
! Component: 3000  -  total flux cleaned = 0.00294017 Jy
! Component: 3050  -  total flux cleaned = 0.00294987 Jy
! Component: 3100  -  total flux cleaned = 0.00294028 Jy
! Component: 3150  -  total flux cleaned = 0.00292089 Jy
! Component: 3200  -  total flux cleaned = 0.00293065 Jy
! Component: 3250  -  total flux cleaned = 0.00294055 Jy
! Component: 3300  -  total flux cleaned = 0.00293075 Jy
! Component: 3350  -  total flux cleaned = 0.00292094 Jy
! Component: 3400  -  total flux cleaned = 0.00292092 Jy
! Component: 3450  -  total flux cleaned = 0.00293098 Jy
! Component: 3500  -  total flux cleaned = 0.00294116 Jy
! Component: 3550  -  total flux cleaned = 0.00294113 Jy
! Component: 3600  -  total flux cleaned = 0.00293095 Jy
! Component: 3650  -  total flux cleaned = 0.00294117 Jy
! Component: 3700  -  total flux cleaned = 0.00293102 Jy
! Component: 3750  -  total flux cleaned = 0.0029311 Jy
! Component: 3800  -  total flux cleaned = 0.0029207 Jy
! Component: 3850  -  total flux cleaned = 0.00292076 Jy
! Component: 3900  -  total flux cleaned = 0.00293137 Jy
! Component: 3950  -  total flux cleaned = 0.00294213 Jy
! Component: 4000  -  total flux cleaned = 0.00296372 Jy
! Component: 4050  -  total flux cleaned = 0.00298554 Jy
! Total flux subtracted in 4096 components = 0.00299638 Jy
! Clean residual min=-0.000815 max=0.000751 Jy/beam
! Clean residual mean=-0.000002 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.069814 Jy
keep
! Adding 228 model components to the UV plane model.
! The established model now contains 276 components and 0.069814 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a0_uvs/J0655-230A_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9906 x 2.373 at 7.405 degrees (North through East)
! Clean map  min=-0.0013608  max=0.052118 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a0_uvs/J0655-230A_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0521177 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000175827 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.0121 1.0121 2.02419 4.04838 8.09676 16.1935 32.3871 64.7741
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.052 
quit
! Quitting program
! Log file /scr/pima/bp171a0_uvs/J0655-230A_X_uvs.log closed on Fri Mar 15 12:54:45 2013