! Started logfile: /scr/pima/bp171a0_uvs/J0650-1632_C_uvs.log on Fri Mar 15 08:57:52 2013
obs /scr/pima/bp171a0_uvs/J0650-1632_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a0_uvs/J0650-1632_C_uva.fits
! AN table 1: 13 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.775641 visibilities/baseline/integration-bin.
! Found source: J0650-1632
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  3.94397e+09      3.2e+07          1      3.2e+07
!  02        2  3.97597e+09      3.2e+07          1      3.2e+07
!  03        3  4.00797e+09      3.2e+07          1      3.2e+07
!  04        4  4.03997e+09      3.2e+07          1      3.2e+07
!  05        5  4.23197e+09      3.2e+07          1      3.2e+07
!  06        6  4.32797e+09      3.2e+07          1      3.2e+07
!  07        7  4.35997e+09      3.2e+07          1      3.2e+07
!  08        8  4.39197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2904 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a0_uvs/J0650-1632_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.039114Jy  sigma=0.687855
! Fit after  self-cal, rms=0.855918Jy  sigma=0.549443
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.396 mas, bmaj=3.614 mas, bpa=-1.876 degrees
! Estimated noise=27.5469 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112455 Jy
! Component: 100  -  total flux cleaned = 0.171586 Jy
! Total flux subtracted in 100 components = 0.171586 Jy
! Clean residual min=-0.013080 max=0.031277 Jy/beam
! Clean residual mean=0.000021 rms=0.005178 Jy/beam
! Combined flux in latest and established models = 0.171586 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.171586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102994Jy  sigma=0.069989
! Fit after  self-cal, rms=0.101989Jy  sigma=0.069566
! Inverting map 
! Added new window around map position (-1.5, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0385225 Jy
! Component: 100  -  total flux cleaned = 0.0629513 Jy
! Total flux subtracted in 100 components = 0.0629513 Jy
! Clean residual min=-0.009414 max=0.015214 Jy/beam
! Clean residual mean=0.000008 rms=0.003178 Jy/beam
! Combined flux in latest and established models = 0.234537 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 28 components and 0.234537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.080207Jy  sigma=0.053642
! Fit after  self-cal, rms=0.080038Jy  sigma=0.053570
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.605 mas, bmaj=4.105 mas, bpa=-3.068 degrees
! Estimated noise=20.242 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0241546 Jy
! Component: 100  -  total flux cleaned = 0.0370915 Jy
! Component: 150  -  total flux cleaned = 0.0442478 Jy
! Component: 200  -  total flux cleaned = 0.0485009 Jy
! Total flux subtracted in 200 components = 0.0485009 Jy
! Clean residual min=-0.011145 max=0.015033 Jy/beam
! Clean residual mean=-0.000020 rms=0.003354 Jy/beam
! Combined flux in latest and established models = 0.283038 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 43 components and 0.283038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.073293Jy  sigma=0.048616
! Fit after  self-cal, rms=0.073250Jy  sigma=0.048597
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.66     HN        0.83     LA        0.89     
!   MK        0.85     NL        1.09     OV        0.84     PT        0.93     
!   SC        0.84     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.66     HN        0.81     LA        0.95     
!   MK        0.90     NL        1.08     OV        0.80     PT        0.94     
!   SC        0.85     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.72     HN        0.84     LA        0.97     
!   MK        1.02     NL        1.04     OV        0.87     PT        1.00     
!   SC        0.90     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.09     HN        1.08     LA        1.11     
!   MK        1.13     NL        1.07     OV        1.09     PT        1.04     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.11     HN        1.08     LA        1.09     
!   MK        0.96     NL        1.11     OV        1.19     PT        1.06     
!   SC        1.20     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.05     HN        1.09     LA        1.18     
!   MK        1.42     NL        1.09     OV        1.04     PT        1.06     
!   SC        1.10     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.04     HN        1.05     LA        1.16     
!   MK        1.41     NL        1.23     OV        1.09     PT        1.03     
!   SC        1.14     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.07     HN        1.08     LA        1.16     
!   MK        1.03     NL        1.21     OV        0.99     PT        1.03     
!   SC        1.19     
! 
! 
! Fit before self-cal, rms=0.073250Jy  sigma=0.048597
! Fit after  self-cal, rms=0.051279Jy  sigma=0.033231
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.645 mas, bmaj=4.208 mas, bpa=-2.539 degrees
! Estimated noise=20.2368 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000241079 Jy
! Component: 100  -  total flux cleaned = 0.000155835 Jy
! Component: 150  -  total flux cleaned = 0.000118184 Jy
! Component: 200  -  total flux cleaned = 5.13941e-05 Jy
! Total flux subtracted in 200 components = 5.13941e-05 Jy
! Clean residual min=-0.003206 max=0.004228 Jy/beam
! Clean residual mean=-0.000001 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 0.283089 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 51 components and 0.283089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051216Jy  sigma=0.033191
! Fit after  self-cal, rms=0.051292Jy  sigma=0.033162
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051292Jy  sigma=0.033162
! Fit after  self-cal, rms=0.051154Jy  sigma=0.033160
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.643 mas, bmaj=4.206 mas, bpa=-2.659 degrees
! Estimated noise=20.2248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.12829e-05 Jy
! Component: 100  -  total flux cleaned = -0.000119631 Jy
! Component: 150  -  total flux cleaned = -0.000145453 Jy
! Component: 200  -  total flux cleaned = -0.000145942 Jy
! Total flux subtracted in 200 components = -0.000145942 Jy
! Clean residual min=-0.003195 max=0.004154 Jy/beam
! Clean residual mean=-0.000001 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.282943 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.282943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051133Jy  sigma=0.033144
! Fit after  self-cal, rms=0.051128Jy  sigma=0.033143
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00280831 Jy
! Component: 100  -  total flux cleaned = 0.00329077 Jy
! Component: 150  -  total flux cleaned = 0.0037583 Jy
! Component: 200  -  total flux cleaned = 0.00401438 Jy
! Total flux subtracted in 200 components = 0.00401438 Jy
! Clean residual min=-0.003128 max=0.003352 Jy/beam
! Clean residual mean=-0.000003 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.286958 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 67 components and 0.286958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050885Jy  sigma=0.032945
! Fit after  self-cal, rms=0.050852Jy  sigma=0.032921
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050852Jy  sigma=0.032921
! Fit after  self-cal, rms=0.050760Jy  sigma=0.032910
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.643 mas, bmaj=4.21 mas, bpa=-2.8 degrees
! Estimated noise=20.2276 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133199 Jy
! Component: 100  -  total flux cleaned = 0.00177399 Jy
! Component: 150  -  total flux cleaned = 0.00185872 Jy
! Component: 200  -  total flux cleaned = 0.00193362 Jy
! Total flux subtracted in 200 components = 0.00193362 Jy
! Clean residual min=-0.003011 max=0.003115 Jy/beam
! Clean residual mean=-0.000003 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.288891 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 84 components and 0.288891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050717Jy  sigma=0.032869
! Fit after  self-cal, rms=0.050710Jy  sigma=0.032864
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000402557 Jy
! Component: 100  -  total flux cleaned = 0.000400581 Jy
! Component: 150  -  total flux cleaned = 0.000379129 Jy
! Component: 200  -  total flux cleaned = 0.000358639 Jy
! Total flux subtracted in 200 components = 0.000358639 Jy
! Clean residual min=-0.003030 max=0.003088 Jy/beam
! Clean residual mean=-0.000003 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.28925 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 94 components and 0.28925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050693Jy  sigma=0.032851
! Fit after  self-cal, rms=0.050691Jy  sigma=0.032850
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050691Jy  sigma=0.032850
! Fit after  self-cal, rms=0.050565Jy  sigma=0.032844
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.427 mas, bmaj=7.152 mas, bpa=1.636 degrees
! Estimated noise=24.7419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153151 Jy
! Component: 100  -  total flux cleaned = 0.00200295 Jy
! Component: 150  -  total flux cleaned = 0.00198031 Jy
! Component: 200  -  total flux cleaned = 0.00195904 Jy
! Total flux subtracted in 200 components = 0.00195904 Jy
! Clean residual min=-0.003239 max=0.003613 Jy/beam
! Clean residual mean=-0.000006 rms=0.001050 Jy/beam
! Combined flux in latest and established models = 0.291209 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 107 components and 0.291209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050570Jy  sigma=0.032842
! Fit after  self-cal, rms=0.050565Jy  sigma=0.032839
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000211504 Jy
! Component: 100  -  total flux cleaned = 0.000190002 Jy
! Component: 150  -  total flux cleaned = 0.000190814 Jy
! Component: 200  -  total flux cleaned = 0.000208449 Jy
! Total flux subtracted in 200 components = 0.000208449 Jy
! Clean residual min=-0.003217 max=0.003607 Jy/beam
! Clean residual mean=-0.000006 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 0.291417 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 107 components and 0.291417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050573Jy  sigma=0.032842
! Fit after  self-cal, rms=0.050572Jy  sigma=0.032841
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.641 mas, bmaj=4.21 mas, bpa=-2.91 degrees
! Estimated noise=20.2134 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.641 x 4.21 at -2.91 degrees (North through East)
! Clean map  min=-0.0030216  max=0.15568 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.408 mas, bmaj=3.685 mas, bpa=-2.534 degrees
! Estimated noise=28.1214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.114821 Jy
! Component: 100  -  total flux cleaned = 0.174783 Jy
! Component: 150  -  total flux cleaned = 0.212194 Jy
! Component: 200  -  total flux cleaned = 0.236363 Jy
! Total flux subtracted in 200 components = 0.236363 Jy
! Clean residual min=-0.006297 max=0.012744 Jy/beam
! Clean residual mean=0.000010 rms=0.002166 Jy/beam
! Combined flux in latest and established models = 0.236363 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.236363 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.641 mas, bmaj=4.21 mas, bpa=-2.91 degrees
! Estimated noise=20.2134 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0217238 Jy
! Component: 100  -  total flux cleaned = 0.0335956 Jy
! Component: 150  -  total flux cleaned = 0.0410008 Jy
! Component: 200  -  total flux cleaned = 0.0457649 Jy
! Total flux subtracted in 200 components = 0.0457649 Jy
! Clean residual min=-0.003278 max=0.003498 Jy/beam
! Clean residual mean=-0.000000 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.282128 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 42 components and 0.282128 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.427 mas, bmaj=7.152 mas, bpa=1.636 degrees
! Estimated noise=24.7419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00465453 Jy
! Component: 100  -  total flux cleaned = 0.00690179 Jy
! Component: 150  -  total flux cleaned = 0.0074642 Jy
! Component: 200  -  total flux cleaned = 0.00791786 Jy
! Total flux subtracted in 200 components = 0.00791786 Jy
! Clean residual min=-0.003564 max=0.003539 Jy/beam
! Clean residual mean=-0.000004 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.290046 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000336877 Jy
! Component: 100  -  total flux cleaned = 0.00062449 Jy
! Component: 150  -  total flux cleaned = 0.00074905 Jy
! Component: 200  -  total flux cleaned = 0.000833184 Jy
! Total flux subtracted in 200 components = 0.000833184 Jy
! Clean residual min=-0.003455 max=0.003523 Jy/beam
! Clean residual mean=-0.000005 rms=0.001061 Jy/beam
! Combined flux in latest and established models = 0.290879 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 90 components and 0.290879 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.641 mas, bmaj=4.21 mas, bpa=-2.91 degrees
! Estimated noise=20.2134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000475703 Jy
! Component: 100  -  total flux cleaned = 0.000566429 Jy
! Component: 150  -  total flux cleaned = 0.00053339 Jy
! Component: 200  -  total flux cleaned = 0.00040781 Jy
! Total flux subtracted in 200 components = 0.00040781 Jy
! Clean residual min=-0.002940 max=0.003082 Jy/beam
! Clean residual mean=-0.000003 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.291287 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 105 components and 0.291287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050582Jy  sigma=0.032837
! Fit after  self-cal, rms=0.050582Jy  sigma=0.032832
wmodel /scr/pima/bp171a0_uvs/J0650-1632_C_map.mod
! Writing 105 model components to file: /scr/pima/bp171a0_uvs/J0650-1632_C_map.mod
wobs /scr/pima/bp171a0_uvs/J0650-1632_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a0_uvs/J0650-1632_C_uvs.fits
wwins /scr/pima/bp171a0_uvs/J0650-1632_C_map.win
! wwins: Wrote 3 windows to /scr/pima/bp171a0_uvs/J0650-1632_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000632968 Jy
! Component: 100  -  total flux cleaned = 0.000730135 Jy
! Component: 150  -  total flux cleaned = 0.000773153 Jy
! Component: 200  -  total flux cleaned = 0.00107303 Jy
! Component: 250  -  total flux cleaned = 0.00123541 Jy
! Component: 300  -  total flux cleaned = 0.0013124 Jy
! Component: 350  -  total flux cleaned = 0.00112943 Jy
! Component: 400  -  total flux cleaned = 0.00095347 Jy
! Component: 450  -  total flux cleaned = 0.000749781 Jy
! Component: 500  -  total flux cleaned = 0.000684215 Jy
! Component: 550  -  total flux cleaned = 0.000652578 Jy
! Component: 600  -  total flux cleaned = 0.000621692 Jy
! Component: 650  -  total flux cleaned = 0.000652333 Jy
! Component: 700  -  total flux cleaned = 0.000592692 Jy
! Component: 750  -  total flux cleaned = 0.000419499 Jy
! Component: 800  -  total flux cleaned = 0.000307136 Jy
! Component: 850  -  total flux cleaned = 0.000195794 Jy
! Component: 900  -  total flux cleaned = 6.01225e-05 Jy
! Component: 950  -  total flux cleaned = -7.31832e-05 Jy
! Component: 1000  -  total flux cleaned = -0.000229818 Jy
! Component: 1050  -  total flux cleaned = -0.000281437 Jy
! Component: 1100  -  total flux cleaned = -0.0004833 Jy
! Component: 1150  -  total flux cleaned = -0.000581849 Jy
! Component: 1200  -  total flux cleaned = -0.000678767 Jy
! Component: 1250  -  total flux cleaned = -0.000750037 Jy
! Component: 1300  -  total flux cleaned = -0.000773433 Jy
! Component: 1350  -  total flux cleaned = -0.000796229 Jy
! Component: 1400  -  total flux cleaned = -0.000864288 Jy
! Component: 1450  -  total flux cleaned = -0.000930711 Jy
! Component: 1500  -  total flux cleaned = -0.000974475 Jy
! Component: 1550  -  total flux cleaned = -0.00106162 Jy
! Component: 1600  -  total flux cleaned = -0.00106167 Jy
! Component: 1650  -  total flux cleaned = -0.0011668 Jy
! Component: 1700  -  total flux cleaned = -0.00133275 Jy
! Component: 1750  -  total flux cleaned = -0.00141462 Jy
! Component: 1800  -  total flux cleaned = -0.00153626 Jy
! Component: 1850  -  total flux cleaned = -0.00163587 Jy
! Component: 1900  -  total flux cleaned = -0.00179341 Jy
! Component: 1950  -  total flux cleaned = -0.00185177 Jy
! Component: 2000  -  total flux cleaned = -0.00202503 Jy
! Component: 2050  -  total flux cleaned = -0.00213882 Jy
! Component: 2100  -  total flux cleaned = -0.0021762 Jy
! Component: 2150  -  total flux cleaned = -0.00228787 Jy
! Component: 2200  -  total flux cleaned = -0.00234287 Jy
! Component: 2250  -  total flux cleaned = -0.0024518 Jy
! Component: 2300  -  total flux cleaned = -0.00250566 Jy
! Component: 2350  -  total flux cleaned = -0.00264822 Jy
! Component: 2400  -  total flux cleaned = -0.00278904 Jy
! Component: 2450  -  total flux cleaned = -0.00285857 Jy
! Component: 2500  -  total flux cleaned = -0.00297901 Jy
! Component: 2550  -  total flux cleaned = -0.00309862 Jy
! Component: 2600  -  total flux cleaned = -0.00320006 Jy
! Component: 2650  -  total flux cleaned = -0.00340079 Jy
! Component: 2700  -  total flux cleaned = -0.00349981 Jy
! Component: 2750  -  total flux cleaned = -0.00359811 Jy
! Component: 2800  -  total flux cleaned = -0.00367966 Jy
! Component: 2850  -  total flux cleaned = -0.00384081 Jy
! Component: 2900  -  total flux cleaned = -0.00398461 Jy
! Component: 2950  -  total flux cleaned = -0.00407967 Jy
! Component: 3000  -  total flux cleaned = -0.00423675 Jy
! Component: 3050  -  total flux cleaned = -0.00439238 Jy
! Component: 3100  -  total flux cleaned = -0.00445409 Jy
! Component: 3150  -  total flux cleaned = -0.00462273 Jy
! Component: 3200  -  total flux cleaned = -0.00479004 Jy
! Component: 3250  -  total flux cleaned = -0.00491063 Jy
! Component: 3300  -  total flux cleaned = -0.00506033 Jy
! Component: 3350  -  total flux cleaned = -0.00522365 Jy
! Component: 3400  -  total flux cleaned = -0.00537107 Jy
! Component: 3450  -  total flux cleaned = -0.00547348 Jy
! Component: 3500  -  total flux cleaned = -0.0056332 Jy
! Component: 3550  -  total flux cleaned = -0.00574829 Jy
! Component: 3600  -  total flux cleaned = -0.00586253 Jy
! Component: 3650  -  total flux cleaned = -0.00600424 Jy
! Component: 3700  -  total flux cleaned = -0.00614498 Jy
! Component: 3750  -  total flux cleaned = -0.00625673 Jy
! Component: 3800  -  total flux cleaned = -0.00639548 Jy
! Component: 3850  -  total flux cleaned = -0.00650561 Jy
! Component: 3900  -  total flux cleaned = -0.00662857 Jy
! Component: 3950  -  total flux cleaned = -0.00669635 Jy
! Component: 4000  -  total flux cleaned = -0.00681784 Jy
! Component: 4050  -  total flux cleaned = -0.00688473 Jy
! Total flux subtracted in 4096 components = -0.00692474 Jy
! Clean residual min=-0.000800 max=0.000740 Jy/beam
! Clean residual mean=-0.000002 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.284362 Jy
keep
! Adding 272 model components to the UV plane model.
! The established model now contains 377 components and 0.284362 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a0_uvs/J0650-1632_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.641 x 4.21 at -2.91 degrees (North through East)
! Clean map  min=-0.0025367  max=0.15538 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a0_uvs/J0650-1632_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.155382 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000231358 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.446688 0.446688 0.893376 1.78675 3.5735 7.147 14.294 28.588 57.176
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.155 
quit
! Quitting program
! Log file /scr/pima/bp171a0_uvs/J0650-1632_C_uvs.log closed on Fri Mar 15 08:57:55 2013