! Started logfile: /scr/pima/bp171a0_uvs/J0633+3612_C_uvs.log on Fri Mar 15 08:57:35 2013
obs /scr/pima/bp171a0_uvs/J0633+3612_C_uva.fits
! Reading UV FITS file: /scr/pima/bp171a0_uvs/J0633+3612_C_uva.fits
! AN table 1: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.658333 visibilities/baseline/integration-bin.
! Found source: J0633+3612
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  3.94397e+09      3.2e+07          1      3.2e+07
!  02        2  3.97597e+09      3.2e+07          1      3.2e+07
!  03        3  4.00797e+09      3.2e+07          1      3.2e+07
!  04        4  4.03997e+09      3.2e+07          1      3.2e+07
!  05        5  4.23197e+09      3.2e+07          1      3.2e+07
!  06        6  4.32797e+09      3.2e+07          1      3.2e+07
!  07        7  4.35997e+09      3.2e+07          1      3.2e+07
!  08        8  4.39197e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5688 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a0_uvs/J0633+3612_C]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003980Jy  sigma=0.663380
! Fit after  self-cal, rms=0.902806Jy  sigma=0.589586
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.408 mas, bmaj=4.09 mas, bpa=-1.649 degrees
! Estimated noise=21.8361 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0735411 Jy
! Component: 100  -  total flux cleaned = 0.0994554 Jy
! Total flux subtracted in 100 components = 0.0994554 Jy
! Clean residual min=-0.005718 max=0.012012 Jy/beam
! Clean residual mean=-0.000009 rms=0.001875 Jy/beam
! Combined flux in latest and established models = 0.0994554 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0994554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052034Jy  sigma=0.034697
! Fit after  self-cal, rms=0.051936Jy  sigma=0.034640
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140054 Jy
! Component: 100  -  total flux cleaned = 0.022346 Jy
! Total flux subtracted in 100 components = 0.022346 Jy
! Clean residual min=-0.005305 max=0.006893 Jy/beam
! Clean residual mean=-0.000009 rms=0.001341 Jy/beam
! Combined flux in latest and established models = 0.121801 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.121801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047145Jy  sigma=0.031109
! Fit after  self-cal, rms=0.047137Jy  sigma=0.031101
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.589 mas, bmaj=4.247 mas, bpa=-1.35 degrees
! Estimated noise=14.4117 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00725312 Jy
! Component: 100  -  total flux cleaned = 0.0108735 Jy
! Component: 150  -  total flux cleaned = 0.0129539 Jy
! Component: 200  -  total flux cleaned = 0.0143805 Jy
! Total flux subtracted in 200 components = 0.0143805 Jy
! Clean residual min=-0.004905 max=0.006095 Jy/beam
! Clean residual mean=-0.000014 rms=0.001362 Jy/beam
! Combined flux in latest and established models = 0.136182 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 28 components and 0.136182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046154Jy  sigma=0.030359
! Fit after  self-cal, rms=0.046154Jy  sigma=0.030357
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.82     HN        0.84     KP        0.86     
!   LA        0.91     MK        1.01     NL        1.06     OV        0.77     
!   PT        0.92     SC        0.90     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.79     HN        0.82     KP        0.90     
!   LA        0.94     MK        1.08     NL        1.10     OV        0.76     
!   PT        0.95     SC        0.88     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.87     HN        0.86     KP        0.98     
!   LA        1.01     MK        1.12     NL        1.05     OV        0.85     
!   PT        0.98     SC        0.93     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.26     HN        1.07     KP        1.06     
!   LA        1.10     MK        1.48     NL        1.07     OV        1.04     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.31     HN        1.01     KP        0.96     
!   LA        1.06     MK        1.42     NL        1.14     OV        1.23     
!   PT        1.01     SC        1.16     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.18     HN        0.71     KP        1.03     
!   LA        1.21     MK        1.42     NL        1.07     OV        0.94     
!   PT        1.07     SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.18     HN        1.06     KP        1.02     
!   LA        1.15     MK        1.27     NL        1.21     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.26     HN        0.95     KP        1.09     
!   LA        1.13     MK        1.27     NL        1.14     OV        0.76     
!   PT        1.03     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.046154Jy  sigma=0.030357
! Fit after  self-cal, rms=0.039806Jy  sigma=0.025691
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.653 mas, bmaj=4.264 mas, bpa=-0.8614 degrees
! Estimated noise=14.562 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000169011 Jy
! Component: 100  -  total flux cleaned = -6.00785e-05 Jy
! Component: 150  -  total flux cleaned = 1.39168e-05 Jy
! Component: 200  -  total flux cleaned = 8.18118e-05 Jy
! Total flux subtracted in 200 components = 8.18118e-05 Jy
! Clean residual min=-0.002225 max=0.002822 Jy/beam
! Clean residual mean=-0.000004 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.136264 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 41 components and 0.136264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039758Jy  sigma=0.025676
! Fit after  self-cal, rms=0.039841Jy  sigma=0.025659
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039841Jy  sigma=0.025659
! Fit after  self-cal, rms=0.039946Jy  sigma=0.025658
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.656 mas, bmaj=4.262 mas, bpa=-0.8231 degrees
! Estimated noise=14.5554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000148108 Jy
! Component: 100  -  total flux cleaned = -8.33334e-05 Jy
! Component: 150  -  total flux cleaned = -4.28385e-05 Jy
! Component: 200  -  total flux cleaned = 1.37231e-05 Jy
! Total flux subtracted in 200 components = 1.37231e-05 Jy
! Clean residual min=-0.002248 max=0.002831 Jy/beam
! Clean residual mean=-0.000004 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.136277 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 45 components and 0.136277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039915Jy  sigma=0.025649
! Fit after  self-cal, rms=0.039915Jy  sigma=0.025649
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-13.5, -12.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00268795 Jy
! Component: 100  -  total flux cleaned = 0.00424633 Jy
! Component: 150  -  total flux cleaned = 0.00496625 Jy
! Component: 200  -  total flux cleaned = 0.00564247 Jy
! Total flux subtracted in 200 components = 0.00564247 Jy
! Clean residual min=-0.002219 max=0.002229 Jy/beam
! Clean residual mean=-0.000003 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.14192 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 69 components and 0.14192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039724Jy  sigma=0.025503
! Fit after  self-cal, rms=0.039712Jy  sigma=0.025494
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039712Jy  sigma=0.025494
! Fit after  self-cal, rms=0.039643Jy  sigma=0.025483
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.658 mas, bmaj=4.26 mas, bpa=-0.8173 degrees
! Estimated noise=14.5202 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108274 Jy
! Component: 100  -  total flux cleaned = 0.00163769 Jy
! Component: 150  -  total flux cleaned = 0.00195524 Jy
! Component: 200  -  total flux cleaned = 0.00217024 Jy
! Total flux subtracted in 200 components = 0.00217024 Jy
! Clean residual min=-0.002110 max=0.002109 Jy/beam
! Clean residual mean=-0.000003 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.14409 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 84 components and 0.14409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039596Jy  sigma=0.025454
! Fit after  self-cal, rms=0.039593Jy  sigma=0.025452
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000376175 Jy
! Component: 100  -  total flux cleaned = 0.000569419 Jy
! Component: 150  -  total flux cleaned = 0.000725384 Jy
! Component: 200  -  total flux cleaned = 0.000869934 Jy
! Total flux subtracted in 200 components = 0.000869934 Jy
! Clean residual min=-0.002086 max=0.002105 Jy/beam
! Clean residual mean=-0.000003 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.14496 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 89 components and 0.14496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039571Jy  sigma=0.025440
! Fit after  self-cal, rms=0.039570Jy  sigma=0.025439
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039570Jy  sigma=0.025439
! Fit after  self-cal, rms=0.039543Jy  sigma=0.025435
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.362 mas, bmaj=5.03 mas, bpa=-2.203 degrees
! Estimated noise=17.5362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00093899 Jy
! Component: 100  -  total flux cleaned = 0.00130923 Jy
! Component: 150  -  total flux cleaned = 0.00146357 Jy
! Component: 200  -  total flux cleaned = 0.00160564 Jy
! Total flux subtracted in 200 components = 0.00160564 Jy
! Clean residual min=-0.002494 max=0.002883 Jy/beam
! Clean residual mean=-0.000008 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.146566 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 111 components and 0.146566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039540Jy  sigma=0.025435
! Fit after  self-cal, rms=0.039539Jy  sigma=0.025434
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000323794 Jy
! Component: 100  -  total flux cleaned = 0.000420033 Jy
! Component: 150  -  total flux cleaned = 0.000508367 Jy
! Component: 200  -  total flux cleaned = 0.000549614 Jy
! Total flux subtracted in 200 components = 0.000549614 Jy
! Clean residual min=-0.002390 max=0.002895 Jy/beam
! Clean residual mean=-0.000008 rms=0.000745 Jy/beam
! Combined flux in latest and established models = 0.147115 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 119 components and 0.147115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039541Jy  sigma=0.025436
! Fit after  self-cal, rms=0.039541Jy  sigma=0.025436
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.658 mas, bmaj=4.257 mas, bpa=-0.7887 degrees
! Estimated noise=14.4948 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.658 x 4.257 at -0.7887 degrees (North through East)
! Clean map  min=-0.00186  max=0.10147 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.46 mas, bmaj=4.091 mas, bpa=-1.043 degrees
! Estimated noise=22.2663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0749808 Jy
! Component: 100  -  total flux cleaned = 0.0996777 Jy
! Component: 150  -  total flux cleaned = 0.112663 Jy
! Component: 200  -  total flux cleaned = 0.120281 Jy
! Total flux subtracted in 200 components = 0.120281 Jy
! Clean residual min=-0.002832 max=0.004042 Jy/beam
! Clean residual mean=-0.000002 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.120282 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.120282 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.658 mas, bmaj=4.257 mas, bpa=-0.7887 degrees
! Estimated noise=14.4948 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00663252 Jy
! Component: 100  -  total flux cleaned = 0.0106708 Jy
! Component: 150  -  total flux cleaned = 0.0134779 Jy
! Component: 200  -  total flux cleaned = 0.015617 Jy
! Total flux subtracted in 200 components = 0.015617 Jy
! Clean residual min=-0.002418 max=0.002406 Jy/beam
! Clean residual mean=-0.000003 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.135899 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 45 components and 0.135899 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.362 mas, bmaj=5.03 mas, bpa=-2.203 degrees
! Estimated noise=17.5362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00305048 Jy
! Component: 100  -  total flux cleaned = 0.00491518 Jy
! Component: 150  -  total flux cleaned = 0.00632823 Jy
! Component: 200  -  total flux cleaned = 0.0074557 Jy
! Total flux subtracted in 200 components = 0.0074557 Jy
! Clean residual min=-0.002564 max=0.002829 Jy/beam
! Clean residual mean=-0.000007 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.143354 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000912469 Jy
! Component: 100  -  total flux cleaned = 0.00165642 Jy
! Component: 150  -  total flux cleaned = 0.0022656 Jy
! Component: 200  -  total flux cleaned = 0.00277194 Jy
! Total flux subtracted in 200 components = 0.00277194 Jy
! Clean residual min=-0.002392 max=0.002732 Jy/beam
! Clean residual mean=-0.000007 rms=0.000747 Jy/beam
! Combined flux in latest and established models = 0.146126 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 88 components and 0.146126 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.658 mas, bmaj=4.257 mas, bpa=-0.7887 degrees
! Estimated noise=14.4948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.32122e-05 Jy
! Component: 100  -  total flux cleaned = 0.000309439 Jy
! Component: 150  -  total flux cleaned = 0.000415993 Jy
! Component: 200  -  total flux cleaned = 0.000487015 Jy
! Total flux subtracted in 200 components = 0.000487015 Jy
! Clean residual min=-0.002131 max=0.002000 Jy/beam
! Clean residual mean=-0.000003 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.146613 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 107 components and 0.146613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039531Jy  sigma=0.025427
! Fit after  self-cal, rms=0.039526Jy  sigma=0.025426
wmodel /scr/pima/bp171a0_uvs/J0633+3612_C_map.mod
! Writing 107 model components to file: /scr/pima/bp171a0_uvs/J0633+3612_C_map.mod
wobs /scr/pima/bp171a0_uvs/J0633+3612_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a0_uvs/J0633+3612_C_uvs.fits
wwins /scr/pima/bp171a0_uvs/J0633+3612_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bp171a0_uvs/J0633+3612_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000161099 Jy
! Component: 100  -  total flux cleaned = -0.000195485 Jy
! Component: 150  -  total flux cleaned = -0.000164604 Jy
! Component: 200  -  total flux cleaned = -0.000194765 Jy
! Component: 250  -  total flux cleaned = -5.38393e-05 Jy
! Component: 300  -  total flux cleaned = 0.000188581 Jy
! Component: 350  -  total flux cleaned = 0.000344615 Jy
! Component: 400  -  total flux cleaned = 0.000469488 Jy
! Component: 450  -  total flux cleaned = 0.000589779 Jy
! Component: 500  -  total flux cleaned = 0.000659726 Jy
! Component: 550  -  total flux cleaned = 0.000751003 Jy
! Component: 600  -  total flux cleaned = 0.000839585 Jy
! Component: 650  -  total flux cleaned = 0.000903835 Jy
! Component: 700  -  total flux cleaned = 0.00100892 Jy
! Component: 750  -  total flux cleaned = 0.00113149 Jy
! Component: 800  -  total flux cleaned = 0.00125055 Jy
! Component: 850  -  total flux cleaned = 0.00138624 Jy
! Component: 900  -  total flux cleaned = 0.00151876 Jy
! Component: 950  -  total flux cleaned = 0.00161178 Jy
! Component: 1000  -  total flux cleaned = 0.00172101 Jy
! Component: 1050  -  total flux cleaned = 0.00180966 Jy
! Component: 1100  -  total flux cleaned = 0.0018274 Jy
! Component: 1150  -  total flux cleaned = 0.00191279 Jy
! Component: 1200  -  total flux cleaned = 0.00199593 Jy
! Component: 1250  -  total flux cleaned = 0.00211106 Jy
! Component: 1300  -  total flux cleaned = 0.00220764 Jy
! Component: 1350  -  total flux cleaned = 0.00228681 Jy
! Component: 1400  -  total flux cleaned = 0.00241216 Jy
! Component: 1450  -  total flux cleaned = 0.00250452 Jy
! Component: 1500  -  total flux cleaned = 0.00259591 Jy
! Component: 1550  -  total flux cleaned = 0.00271579 Jy
! Component: 1600  -  total flux cleaned = 0.0028482 Jy
! Component: 1650  -  total flux cleaned = 0.00294969 Jy
! Component: 1700  -  total flux cleaned = 0.00306412 Jy
! Component: 1750  -  total flux cleaned = 0.00317696 Jy
! Component: 1800  -  total flux cleaned = 0.00330228 Jy
! Component: 1850  -  total flux cleaned = 0.00338461 Jy
! Component: 1900  -  total flux cleaned = 0.00342531 Jy
! Component: 1950  -  total flux cleaned = 0.00351908 Jy
! Component: 2000  -  total flux cleaned = 0.00355846 Jy
! Component: 2050  -  total flux cleaned = 0.00357143 Jy
! Component: 2100  -  total flux cleaned = 0.00362279 Jy
! Component: 2150  -  total flux cleaned = 0.00360982 Jy
! Component: 2200  -  total flux cleaned = 0.00364762 Jy
! Component: 2250  -  total flux cleaned = 0.00368481 Jy
! Component: 2300  -  total flux cleaned = 0.00366009 Jy
! Component: 2350  -  total flux cleaned = 0.00369667 Jy
! Component: 2400  -  total flux cleaned = 0.00369673 Jy
! Component: 2450  -  total flux cleaned = 0.00372026 Jy
! Component: 2500  -  total flux cleaned = 0.00373203 Jy
! Component: 2550  -  total flux cleaned = 0.0037318 Jy
! Component: 2600  -  total flux cleaned = 0.00375489 Jy
! Component: 2650  -  total flux cleaned = 0.00375505 Jy
! Component: 2700  -  total flux cleaned = 0.00375499 Jy
! Component: 2750  -  total flux cleaned = 0.0037437 Jy
! Component: 2800  -  total flux cleaned = 0.00376543 Jy
! Component: 2850  -  total flux cleaned = 0.00373266 Jy
! Component: 2900  -  total flux cleaned = 0.00374355 Jy
! Component: 2950  -  total flux cleaned = 0.00376484 Jy
! Component: 3000  -  total flux cleaned = 0.00376482 Jy
! Component: 3050  -  total flux cleaned = 0.00378597 Jy
! Component: 3100  -  total flux cleaned = 0.00379654 Jy
! Component: 3150  -  total flux cleaned = 0.00384809 Jy
! Component: 3200  -  total flux cleaned = 0.00385824 Jy
! Component: 3250  -  total flux cleaned = 0.00387838 Jy
! Component: 3300  -  total flux cleaned = 0.00388847 Jy
! Component: 3350  -  total flux cleaned = 0.00389852 Jy
! Component: 3400  -  total flux cleaned = 0.00394776 Jy
! Component: 3450  -  total flux cleaned = 0.00395756 Jy
! Component: 3500  -  total flux cleaned = 0.00397693 Jy
! Component: 3550  -  total flux cleaned = 0.00400567 Jy
! Component: 3600  -  total flux cleaned = 0.00399615 Jy
! Component: 3650  -  total flux cleaned = 0.00399615 Jy
! Component: 3700  -  total flux cleaned = 0.00400558 Jy
! Component: 3750  -  total flux cleaned = 0.00402422 Jy
! Component: 3800  -  total flux cleaned = 0.00402424 Jy
! Component: 3850  -  total flux cleaned = 0.00405181 Jy
! Component: 3900  -  total flux cleaned = 0.00404273 Jy
! Component: 3950  -  total flux cleaned = 0.00406979 Jy
! Component: 4000  -  total flux cleaned = 0.00407877 Jy
! Component: 4050  -  total flux cleaned = 0.00405202 Jy
! Total flux subtracted in 4096 components = 0.00405201 Jy
! Clean residual min=-0.000465 max=0.000502 Jy/beam
! Clean residual mean=-0.000000 rms=0.000160 Jy/beam
! Combined flux in latest and established models = 0.150665 Jy
keep
! Adding 338 model components to the UV plane model.
! The established model now contains 445 components and 0.150665 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a0_uvs/J0633+3612_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.658 x 4.257 at -0.7887 degrees (North through East)
! Clean map  min=-0.0012098  max=0.10145 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a0_uvs/J0633+3612_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.101451 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000155935 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.461115 0.461115 0.922231 1.84446 3.68892 7.37785 14.7557 29.5114 59.0228
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.101 
quit
! Quitting program
! Log file /scr/pima/bp171a0_uvs/J0633+3612_C_uvs.log closed on Fri Mar 15 08:57:38 2013