! Started logfile: /scr/pima/bp171a0_uvs/J0545-0636_X_uvs.log on Fri Mar 15 12:53:14 2013
obs /scr/pima/bp171a0_uvs/J0545-0636_X_uva.fits
! Reading UV FITS file: /scr/pima/bp171a0_uvs/J0545-0636_X_uva.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.611111 visibilities/baseline/integration-bin.
! Found source: J0545-0636
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  7.40797e+09      3.2e+07          1      3.2e+07
!  02        2  7.43997e+09      3.2e+07          1      3.2e+07
!  03        3  7.47197e+09      3.2e+07          1      3.2e+07
!  04        4  7.56797e+09      3.2e+07          1      3.2e+07
!  05        5  7.75997e+09      3.2e+07          1      3.2e+07
!  06        6  7.79197e+09      3.2e+07          1      3.2e+07
!  07        7  7.82397e+09      3.2e+07          1      3.2e+07
!  08        8  7.85597e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3520 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp171a0_uvs/J0545-0636_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003062Jy  sigma=0.682677
! Fit after  self-cal, rms=0.986506Jy  sigma=0.671806
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8993 mas, bmaj=2.207 mas, bpa=8.797 degrees
! Estimated noise=25.3947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112013 Jy
! Component: 100  -  total flux cleaned = 0.0137893 Jy
! Total flux subtracted in 100 components = 0.0137893 Jy
! Clean residual min=-0.002306 max=0.002327 Jy/beam
! Clean residual mean=-0.000001 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.0137893 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0137893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034836Jy  sigma=0.023409
! Fit after  self-cal, rms=0.031450Jy  sigma=0.021052
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00684749 Jy
! Component: 100  -  total flux cleaned = 0.00887426 Jy
! Total flux subtracted in 100 components = 0.00887426 Jy
! Clean residual min=-0.002175 max=0.002027 Jy/beam
! Clean residual mean=-0.000002 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.0226636 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0226636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030135Jy  sigma=0.020119
! Fit after  self-cal, rms=0.030129Jy  sigma=0.020115
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=2.499 mas, bpa=9.096 degrees
! Estimated noise=17.7232 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119211 Jy
! Component: 100  -  total flux cleaned = 0.00189449 Jy
! Component: 150  -  total flux cleaned = 0.00221625 Jy
! Component: 200  -  total flux cleaned = 0.00233329 Jy
! Total flux subtracted in 200 components = 0.00233329 Jy
! Clean residual min=-0.001735 max=0.001592 Jy/beam
! Clean residual mean=-0.000004 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.0249969 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 32 components and 0.0249969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030079Jy  sigma=0.020080
! Fit after  self-cal, rms=0.030078Jy  sigma=0.020077
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.19     HN        0.89     KP        0.98     
!   LA        0.93     MK        1.20     NL        1.14     OV        0.88     
!   PT        0.71     SC        1.17     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        1.35     HN        0.95     KP        1.20     
!   LA        1.01     MK        1.02     NL        1.16     OV        0.92     
!   PT        0.81     SC        0.95     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.87     HN        0.90     KP        1.22     
!   LA        0.89     MK        1.23     NL        1.10     OV        0.90     
!   PT        1.08     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        1.24     HN        0.97     KP        1.17     
!   LA        0.84     MK        0.89     NL        1.05     OV        0.96     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        1.10     KP        1.15     
!   LA        0.94     MK        1.15     NL        1.14     OV        1.01     
!   PT        0.76     SC        1.12     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        1.05     KP        1.24     
!   LA        0.95     MK        1.00     NL        1.05     OV        1.00     
!   PT        0.95     SC        0.93     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        1.04     HN        1.12     KP        1.18     
!   LA        0.73     MK        1.07     NL        1.17     OV        1.05     
!   PT        0.89     SC        0.94     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.27     FD        0.99     HN        0.93     KP        1.38     
!   LA        0.72     MK        0.72     NL        0.91     OV        1.11     
!   PT        1.04     SC        1.19     
! 
! 
! Fit before self-cal, rms=0.030078Jy  sigma=0.020077
! Fit after  self-cal, rms=0.029486Jy  sigma=0.019414
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.049 mas, bmaj=2.535 mas, bpa=8.237 degrees
! Estimated noise=18.0951 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227033 Jy
! Component: 100  -  total flux cleaned = 0.000216579 Jy
! Component: 150  -  total flux cleaned = 0.000199775 Jy
! Component: 200  -  total flux cleaned = 0.000191499 Jy
! Total flux subtracted in 200 components = 0.000191499 Jy
! Clean residual min=-0.001489 max=0.001284 Jy/beam
! Clean residual mean=-0.000000 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0251884 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 42 components and 0.0251884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029478Jy  sigma=0.019410
! Fit after  self-cal, rms=0.029603Jy  sigma=0.019382
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029603Jy  sigma=0.019382
! Fit after  self-cal, rms=0.029852Jy  sigma=0.019377
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=2.528 mas, bpa=8.17 degrees
! Estimated noise=18.1439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000189117 Jy
! Component: 100  -  total flux cleaned = 0.000173401 Jy
! Component: 150  -  total flux cleaned = 0.000166127 Jy
! Component: 200  -  total flux cleaned = 0.000159064 Jy
! Total flux subtracted in 200 components = 0.000159064 Jy
! Clean residual min=-0.001519 max=0.001280 Jy/beam
! Clean residual mean=-0.000000 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.0253475 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 45 components and 0.0253475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029846Jy  sigma=0.019375
! Fit after  self-cal, rms=0.029867Jy  sigma=0.019370
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.32003e-05 Jy
! Component: 100  -  total flux cleaned = -2.29626e-05 Jy
! Component: 150  -  total flux cleaned = -2.33639e-05 Jy
! Component: 200  -  total flux cleaned = -2.95566e-05 Jy
! Total flux subtracted in 200 components = -2.95566e-05 Jy
! Clean residual min=-0.001496 max=0.001457 Jy/beam
! Clean residual mean=-0.000000 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.0253179 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 47 components and 0.0253179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029864Jy  sigma=0.019368
! Fit after  self-cal, rms=0.029865Jy  sigma=0.019368
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029865Jy  sigma=0.019368
! Fit after  self-cal, rms=0.029928Jy  sigma=0.019367
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=2.524 mas, bpa=8.142 degrees
! Estimated noise=18.1687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128485 Jy
! Component: 100  -  total flux cleaned = 0.000122103 Jy
! Component: 150  -  total flux cleaned = 0.000122134 Jy
! Component: 200  -  total flux cleaned = 0.000121982 Jy
! Total flux subtracted in 200 components = 0.000121982 Jy
! Clean residual min=-0.001519 max=0.001459 Jy/beam
! Clean residual mean=-0.000000 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.0254399 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 49 components and 0.0254399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029924Jy  sigma=0.019365
! Fit after  self-cal, rms=0.029928Jy  sigma=0.019365
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.69307e-06 Jy
! Component: 100  -  total flux cleaned = -6.81203e-06 Jy
! Component: 150  -  total flux cleaned = -1.26779e-05 Jy
! Component: 200  -  total flux cleaned = -1.26864e-05 Jy
! Total flux subtracted in 200 components = -1.26864e-05 Jy
! Clean residual min=-0.001505 max=0.001455 Jy/beam
! Clean residual mean=-0.000000 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.0254272 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 49 components and 0.0254272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029926Jy  sigma=0.019364
! Fit after  self-cal, rms=0.029926Jy  sigma=0.019364
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029926Jy  sigma=0.019364
! Fit after  self-cal, rms=0.029938Jy  sigma=0.019364
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.1 mas, bmaj=4.029 mas, bpa=4.787 degrees
! Estimated noise=22.1367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012781 Jy
! Component: 100  -  total flux cleaned = 7.82501e-05 Jy
! Component: 150  -  total flux cleaned = 4.43158e-05 Jy
! Component: 200  -  total flux cleaned = 1.90726e-05 Jy
! Total flux subtracted in 200 components = 1.90726e-05 Jy
! Clean residual min=-0.001650 max=0.001376 Jy/beam
! Clean residual mean=-0.000000 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.0254463 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 56 components and 0.0254463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029944Jy  sigma=0.019366
! Fit after  self-cal, rms=0.029935Jy  sigma=0.019363
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.05656e-06 Jy
! Component: 100  -  total flux cleaned = -3.71673e-05 Jy
! Component: 150  -  total flux cleaned = -5.11338e-05 Jy
! Component: 200  -  total flux cleaned = -6.20774e-05 Jy
! Total flux subtracted in 200 components = -6.20774e-05 Jy
! Clean residual min=-0.001628 max=0.001366 Jy/beam
! Clean residual mean=-0.000000 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.0253842 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 61 components and 0.0253842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029941Jy  sigma=0.019365
! Fit after  self-cal, rms=0.029934Jy  sigma=0.019363
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.041 mas, bmaj=2.519 mas, bpa=8.114 degrees
! Estimated noise=18.1889 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.041 x 2.519 at 8.114 degrees (North through East)
! Clean map  min=-0.0014095  max=0.021874 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9005 mas, bmaj=2.207 mas, bpa=7.555 degrees
! Estimated noise=26.0708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0172723 Jy
! Component: 100  -  total flux cleaned = 0.0212034 Jy
! Component: 150  -  total flux cleaned = 0.0227639 Jy
! Component: 200  -  total flux cleaned = 0.023716 Jy
! Total flux subtracted in 200 components = 0.023716 Jy
! Clean residual min=-0.001782 max=0.001689 Jy/beam
! Clean residual mean=0.000000 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.023716 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.023716 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.041 mas, bmaj=2.519 mas, bpa=8.114 degrees
! Estimated noise=18.1889 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110736 Jy
! Component: 100  -  total flux cleaned = 0.0015141 Jy
! Component: 150  -  total flux cleaned = 0.00155055 Jy
! Component: 200  -  total flux cleaned = 0.00157068 Jy
! Total flux subtracted in 200 components = 0.00157068 Jy
! Clean residual min=-0.001493 max=0.001428 Jy/beam
! Clean residual mean=-0.000000 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.0252867 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 35 components and 0.0252867 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.1 mas, bmaj=4.029 mas, bpa=4.787 degrees
! Estimated noise=22.1367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00010911 Jy
! Component: 100  -  total flux cleaned = 7.94226e-05 Jy
! Component: 150  -  total flux cleaned = 5.73751e-05 Jy
! Component: 200  -  total flux cleaned = 4.14446e-05 Jy
! Total flux subtracted in 200 components = 4.14446e-05 Jy
! Clean residual min=-0.001618 max=0.001361 Jy/beam
! Clean residual mean=-0.000000 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.0253282 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.82209e-05 Jy
! Component: 100  -  total flux cleaned = -2.35634e-05 Jy
! Component: 150  -  total flux cleaned = -3.28402e-05 Jy
! Component: 200  -  total flux cleaned = -3.28645e-05 Jy
! Total flux subtracted in 200 components = -3.28645e-05 Jy
! Clean residual min=-0.001600 max=0.001355 Jy/beam
! Clean residual mean=-0.000000 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.0252953 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 47 components and 0.0252953 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.041 mas, bmaj=2.519 mas, bpa=8.114 degrees
! Estimated noise=18.1889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.4838e-05 Jy
! Component: 100  -  total flux cleaned = -5.32393e-06 Jy
! Component: 150  -  total flux cleaned = -1.6303e-05 Jy
! Component: 200  -  total flux cleaned = -2.49228e-05 Jy
! Total flux subtracted in 200 components = -2.49228e-05 Jy
! Clean residual min=-0.001492 max=0.001437 Jy/beam
! Clean residual mean=-0.000000 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.0252704 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 55 components and 0.0252704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029938Jy  sigma=0.019363
! Fit after  self-cal, rms=0.029935Jy  sigma=0.019361
wmodel /scr/pima/bp171a0_uvs/J0545-0636_X_map.mod
! Writing 55 model components to file: /scr/pima/bp171a0_uvs/J0545-0636_X_map.mod
wobs /scr/pima/bp171a0_uvs/J0545-0636_X_uvs.fits
! Writing UV FITS file: /scr/pima/bp171a0_uvs/J0545-0636_X_uvs.fits
wwins /scr/pima/bp171a0_uvs/J0545-0636_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bp171a0_uvs/J0545-0636_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.17515e-05 Jy
! Component: 100  -  total flux cleaned = -3.34839e-05 Jy
! Component: 150  -  total flux cleaned = -7.77053e-05 Jy
! Component: 200  -  total flux cleaned = -5.6437e-05 Jy
! Component: 250  -  total flux cleaned = -3.68245e-05 Jy
! Component: 300  -  total flux cleaned = -7.48102e-05 Jy
! Component: 350  -  total flux cleaned = -3.86929e-05 Jy
! Component: 400  -  total flux cleaned = -5.56661e-05 Jy
! Component: 450  -  total flux cleaned = 2.82488e-05 Jy
! Component: 500  -  total flux cleaned = 4.42992e-05 Jy
! Component: 550  -  total flux cleaned = 7.59886e-05 Jy
! Component: 600  -  total flux cleaned = 0.000106518 Jy
! Component: 650  -  total flux cleaned = 0.000136054 Jy
! Component: 700  -  total flux cleaned = 0.000178748 Jy
! Component: 750  -  total flux cleaned = 0.000178435 Jy
! Component: 800  -  total flux cleaned = 0.000218798 Jy
! Component: 850  -  total flux cleaned = 0.00021918 Jy
! Component: 900  -  total flux cleaned = 0.000257828 Jy
! Component: 950  -  total flux cleaned = 0.000270945 Jy
! Component: 1000  -  total flux cleaned = 0.000345131 Jy
! Component: 1050  -  total flux cleaned = 0.000393254 Jy
! Component: 1100  -  total flux cleaned = 0.000464098 Jy
! Component: 1150  -  total flux cleaned = 0.000556395 Jy
! Component: 1200  -  total flux cleaned = 0.000601629 Jy
! Component: 1250  -  total flux cleaned = 0.000690417 Jy
! Component: 1300  -  total flux cleaned = 0.000712167 Jy
! Component: 1350  -  total flux cleaned = 0.00078688 Jy
! Component: 1400  -  total flux cleaned = 0.000839262 Jy
! Component: 1450  -  total flux cleaned = 0.000870048 Jy
! Component: 1500  -  total flux cleaned = 0.00091039 Jy
! Component: 1550  -  total flux cleaned = 0.000950112 Jy
! Component: 1600  -  total flux cleaned = 0.000969376 Jy
! Component: 1650  -  total flux cleaned = 0.000998057 Jy
! Component: 1700  -  total flux cleaned = 0.00100739 Jy
! Component: 1750  -  total flux cleaned = 0.00099813 Jy
! Component: 1800  -  total flux cleaned = 0.00102542 Jy
! Component: 1850  -  total flux cleaned = 0.00100739 Jy
! Component: 1900  -  total flux cleaned = 0.00101607 Jy
! Component: 1950  -  total flux cleaned = 0.0010421 Jy
! Component: 2000  -  total flux cleaned = 0.00105053 Jy
! Component: 2050  -  total flux cleaned = 0.00107595 Jy
! Component: 2100  -  total flux cleaned = 0.00108432 Jy
! Component: 2150  -  total flux cleaned = 0.00111738 Jy
! Component: 2200  -  total flux cleaned = 0.0011417 Jy
! Component: 2250  -  total flux cleaned = 0.00114173 Jy
! Component: 2300  -  total flux cleaned = 0.00115765 Jy
! Component: 2350  -  total flux cleaned = 0.00117337 Jy
! Component: 2400  -  total flux cleaned = 0.00119651 Jy
! Component: 2450  -  total flux cleaned = 0.00118113 Jy
! Component: 2500  -  total flux cleaned = 0.00119614 Jy
! Component: 2550  -  total flux cleaned = 0.00120363 Jy
! Component: 2600  -  total flux cleaned = 0.00120376 Jy
! Component: 2650  -  total flux cleaned = 0.00122572 Jy
! Component: 2700  -  total flux cleaned = 0.00125464 Jy
! Component: 2750  -  total flux cleaned = 0.00126888 Jy
! Component: 2800  -  total flux cleaned = 0.0012688 Jy
! Component: 2850  -  total flux cleaned = 0.00125487 Jy
! Component: 2900  -  total flux cleaned = 0.00125494 Jy
! Component: 2950  -  total flux cleaned = 0.00126865 Jy
! Component: 3000  -  total flux cleaned = 0.00127535 Jy
! Component: 3050  -  total flux cleaned = 0.00128217 Jy
! Component: 3100  -  total flux cleaned = 0.0012888 Jy
! Component: 3150  -  total flux cleaned = 0.00128218 Jy
! Component: 3200  -  total flux cleaned = 0.00128211 Jy
! Component: 3250  -  total flux cleaned = 0.00126266 Jy
! Component: 3300  -  total flux cleaned = 0.00128198 Jy
! Component: 3350  -  total flux cleaned = 0.00128195 Jy
! Component: 3400  -  total flux cleaned = 0.00128199 Jy
! Component: 3450  -  total flux cleaned = 0.00127571 Jy
! Component: 3500  -  total flux cleaned = 0.00126954 Jy
! Component: 3550  -  total flux cleaned = 0.00127577 Jy
! Component: 3600  -  total flux cleaned = 0.00127576 Jy
! Component: 3650  -  total flux cleaned = 0.00126966 Jy
! Component: 3700  -  total flux cleaned = 0.00126361 Jy
! Component: 3750  -  total flux cleaned = 0.00126363 Jy
! Component: 3800  -  total flux cleaned = 0.00125766 Jy
! Component: 3850  -  total flux cleaned = 0.00125173 Jy
! Component: 3900  -  total flux cleaned = 0.00124584 Jy
! Component: 3950  -  total flux cleaned = 0.00125764 Jy
! Component: 4000  -  total flux cleaned = 0.00126352 Jy
! Component: 4050  -  total flux cleaned = 0.00126348 Jy
! Total flux subtracted in 4096 components = 0.00126348 Jy
! Clean residual min=-0.000361 max=0.000304 Jy/beam
! Clean residual mean=0.000001 rms=0.000098 Jy/beam
! Combined flux in latest and established models = 0.0265339 Jy
keep
! Adding 271 model components to the UV plane model.
! The established model now contains 326 components and 0.0265339 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bp171a0_uvs/J0545-0636_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.041 x 2.519 at 8.114 degrees (North through East)
! Clean map  min=-0.00078164  max=0.021987 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp171a0_uvs/J0545-0636_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0219874 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.67529e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.32011 1.32011 2.64022 5.28045 10.5609 21.1218 42.2436 84.4872
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.021 
quit
! Quitting program
! Log file /scr/pima/bp171a0_uvs/J0545-0636_X_uvs.log closed on Fri Mar 15 12:53:18 2013