! Started logfile: /scr/pima/bm252b_uvs/J2045-0435_X_dfm.log on Fri Jun 15 01:59:24 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.40599
obs     /scr/pima/bm252b_uvs/J2045-0435_X_uva.fits
! Reading UV FITS file: /scr/pima/bm252b_uvs/J2045-0435_X_uva.fits
! AN table 1: 202 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.802923 visibilities/baseline/integration-bin.
! Found source: J2045-0435
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09      1.6e+07          1      1.6e+07
!  02        2  8.47599e+09      1.6e+07          1      1.6e+07
!  03        3  8.79099e+09      1.6e+07          1      1.6e+07
!  04        4  8.89599e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 13624 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2045-0435_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 156 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 156 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 156 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 156 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001943Jy  sigma=20.776553
! Fit after  self-cal, rms=0.973110Jy  sigma=20.182686
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.451 mas, bmaj=3.709 mas, bpa=11.18 degrees
! Estimated noise=0.456583 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0222873 Jy
! Component: 100  -  total flux cleaned = 0.027184 Jy
! Total flux subtracted in 100 components = 0.027184 Jy
! Clean residual min=-0.001925 max=0.001914 Jy/beam
! Clean residual mean=0.000003 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.0271839 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0271839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046958Jy  sigma=0.936649
! Fit after  self-cal, rms=0.045275Jy  sigma=0.901280
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00332072 Jy
! Component: 100  -  total flux cleaned = 0.00315467 Jy
! Total flux subtracted in 100 components = 0.00315467 Jy
! Clean residual min=-0.001932 max=0.001989 Jy/beam
! Clean residual mean=0.000003 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.0303386 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 15 components and 0.0303386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045097Jy  sigma=0.898329
! Fit after  self-cal, rms=0.045074Jy  sigma=0.898193
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.688 mas, bmaj=4.185 mas, bpa=8.009 degrees
! Estimated noise=0.296617 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.78368e-05 Jy
! Component: 100  -  total flux cleaned = 5.67203e-05 Jy
! Component: 150  -  total flux cleaned = 5.86916e-05 Jy
! Component: 200  -  total flux cleaned = 5.90033e-05 Jy
! Total flux subtracted in 200 components = 5.90033e-05 Jy
! Clean residual min=-0.001252 max=0.001379 Jy/beam
! Clean residual mean=0.000002 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.0303976 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 25 components and 0.0303976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045052Jy  sigma=0.897855
! Fit after  self-cal, rms=0.045024Jy  sigma=0.897617
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.688 x 4.185 at 8.009 degrees (North through East)
! Clean map  min=-0.0012895  max=0.030665 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     KP        0.96     LA        1.00     
!   NL        1.06     OV        1.03     PT        1.16     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     KP        1.07     LA        1.01     
!   NL        1.02     OV        1.01     PT        0.97     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.91     KP        1.08     LA        1.00     
!   NL        0.94     OV        0.96     PT        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.96     KP        1.07     LA        0.95     
!   NL        1.00     OV        0.96     PT        0.98     
! 
! 
! Fit before self-cal, rms=0.045024Jy  sigma=0.897617
! Fit after  self-cal, rms=0.043991Jy  sigma=0.895629
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.67 mas, bmaj=4.146 mas, bpa=9.394 degrees
! Estimated noise=0.295127 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000695244 Jy
! Component: 100  -  total flux cleaned = 0.000894777 Jy
! Component: 150  -  total flux cleaned = 0.000919031 Jy
! Component: 200  -  total flux cleaned = 0.000926433 Jy
! Total flux subtracted in 200 components = 0.000926433 Jy
! Clean residual min=-0.001100 max=0.001044 Jy/beam
! Clean residual mean=0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.0313241 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 37 components and 0.0313241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.043980Jy  sigma=0.895405
! Fit after  self-cal, rms=0.043971Jy  sigma=0.894741
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.043971Jy  sigma=0.894741
! Fit after  self-cal, rms=0.044141Jy  sigma=0.893720
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.665 mas, bmaj=4.129 mas, bpa=10.49 degrees
! Estimated noise=0.29591 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00054771 Jy
! Component: 100  -  total flux cleaned = 0.000781562 Jy
! Component: 150  -  total flux cleaned = 0.000865348 Jy
! Component: 200  -  total flux cleaned = 0.000906028 Jy
! Total flux subtracted in 200 components = 0.000906028 Jy
! Clean residual min=-0.001055 max=0.000991 Jy/beam
! Clean residual mean=0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.0322301 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 42 components and 0.0322301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044134Jy  sigma=0.893566
! Fit after  self-cal, rms=0.044157Jy  sigma=0.893247
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.61315e-05 Jy
! Component: 100  -  total flux cleaned = 5.71967e-05 Jy
! Component: 150  -  total flux cleaned = 6.51139e-05 Jy
! Component: 200  -  total flux cleaned = 7.22364e-05 Jy
! Total flux subtracted in 200 components = 7.22364e-05 Jy
! Clean residual min=-0.001116 max=0.001064 Jy/beam
! Clean residual mean=0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0323023 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 49 components and 0.0323023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044153Jy  sigma=0.893166
! Fit after  self-cal, rms=0.044146Jy  sigma=0.893088
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044146Jy  sigma=0.893088
! Fit after  self-cal, rms=0.044359Jy  sigma=0.892690
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.657 mas, bmaj=4.116 mas, bpa=11.03 degrees
! Estimated noise=0.295629 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000443259 Jy
! Component: 100  -  total flux cleaned = 0.00057589 Jy
! Component: 150  -  total flux cleaned = 0.000630936 Jy
! Component: 200  -  total flux cleaned = 0.000670405 Jy
! Total flux subtracted in 200 components = 0.000670405 Jy
! Clean residual min=-0.001024 max=0.001040 Jy/beam
! Clean residual mean=0.000001 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.0329727 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 53 components and 0.0329727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044353Jy  sigma=0.892589
! Fit after  self-cal, rms=0.044384Jy  sigma=0.892397
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.27826e-05 Jy
! Component: 100  -  total flux cleaned = -1.48306e-05 Jy
! Component: 150  -  total flux cleaned = -7.8295e-06 Jy
! Component: 200  -  total flux cleaned = -1.57134e-06 Jy
! Total flux subtracted in 200 components = -1.57134e-06 Jy
! Clean residual min=-0.001075 max=0.001050 Jy/beam
! Clean residual mean=0.000001 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.0329712 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 56 components and 0.0329712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044382Jy  sigma=0.892345
! Fit after  self-cal, rms=0.044382Jy  sigma=0.892296
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044382Jy  sigma=0.892296
! Fit after  self-cal, rms=0.044518Jy  sigma=0.892222
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.006 mas, bmaj=4.466 mas, bpa=14.69 degrees
! Estimated noise=0.302307 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394123 Jy
! Component: 100  -  total flux cleaned = 0.000536672 Jy
! Component: 150  -  total flux cleaned = 0.00059328 Jy
! Component: 200  -  total flux cleaned = 0.000633584 Jy
! Total flux subtracted in 200 components = 0.000633584 Jy
! Clean residual min=-0.001060 max=0.000927 Jy/beam
! Clean residual mean=0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0336047 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 62 components and 0.0336047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044514Jy  sigma=0.892159
! Fit after  self-cal, rms=0.044525Jy  sigma=0.892021
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.54845e-05 Jy
! Component: 100  -  total flux cleaned = 7.83033e-05 Jy
! Component: 150  -  total flux cleaned = 0.000105728 Jy
! Component: 200  -  total flux cleaned = 0.000114965 Jy
! Total flux subtracted in 200 components = 0.000114965 Jy
! Clean residual min=-0.001091 max=0.000915 Jy/beam
! Clean residual mean=0.000001 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.0337197 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 0.0337197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044523Jy  sigma=0.891988
! Fit after  self-cal, rms=0.044520Jy  sigma=0.891888
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.649 mas, bmaj=4.104 mas, bpa=11.37 degrees
! Estimated noise=0.29562 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.649 x 4.104 at 11.37 degrees (North through East)
! Clean map  min=-0.0010892  max=0.030534 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.407 mas, bmaj=3.669 mas, bpa=14.99 degrees
! Estimated noise=0.44559 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0238744 Jy
! Component: 100  -  total flux cleaned = 0.0292812 Jy
! Component: 150  -  total flux cleaned = 0.0309409 Jy
! Component: 200  -  total flux cleaned = 0.03174 Jy
! Total flux subtracted in 200 components = 0.03174 Jy
! Clean residual min=-0.001752 max=0.001464 Jy/beam
! Clean residual mean=0.000004 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.03174 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.03174 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.649 mas, bmaj=4.104 mas, bpa=11.37 degrees
! Estimated noise=0.29562 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.2, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150347 Jy
! Component: 100  -  total flux cleaned = 0.00177569 Jy
! Component: 150  -  total flux cleaned = 0.00188536 Jy
! Component: 200  -  total flux cleaned = 0.0019806 Jy
! Total flux subtracted in 200 components = 0.0019806 Jy
! Clean residual min=-0.001246 max=0.000971 Jy/beam
! Clean residual mean=0.000001 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.0337206 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 60 components and 0.0337206 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.006 mas, bmaj=4.466 mas, bpa=14.69 degrees
! Estimated noise=0.302307 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000418806 Jy
! Component: 100  -  total flux cleaned = 0.000622733 Jy
! Component: 150  -  total flux cleaned = 0.000737779 Jy
! Component: 200  -  total flux cleaned = 0.000856863 Jy
! Total flux subtracted in 200 components = 0.000856863 Jy
! Clean residual min=-0.001153 max=0.000852 Jy/beam
! Clean residual mean=0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.0345775 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.46791e-05 Jy
! Component: 100  -  total flux cleaned = 0.000181551 Jy
! Component: 150  -  total flux cleaned = 0.0002623 Jy
! Component: 200  -  total flux cleaned = 0.000337651 Jy
! Total flux subtracted in 200 components = 0.000337651 Jy
! Clean residual min=-0.001089 max=0.000851 Jy/beam
! Clean residual mean=0.000001 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.0349151 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 106 components and 0.0349151 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.649 mas, bmaj=4.104 mas, bpa=11.37 degrees
! Estimated noise=0.29562 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000112575 Jy
! Component: 100  -  total flux cleaned = -7.14727e-05 Jy
! Component: 150  -  total flux cleaned = -4.34712e-05 Jy
! Component: 200  -  total flux cleaned = -1.73359e-05 Jy
! Total flux subtracted in 200 components = -1.73359e-05 Jy
! Clean residual min=-0.001006 max=0.000884 Jy/beam
! Clean residual mean=0.000001 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.0348978 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 120 components and 0.0348978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044500Jy  sigma=0.891451
! Fit after  self-cal, rms=0.044494Jy  sigma=0.891270
wmodel J2045-0435_X_map.mod
! Writing 120 model components to file: J2045-0435_X_map.mod
wobs   J2045-0435_X_uvs.fits
! Writing UV FITS file: J2045-0435_X_uvs.fits
wwins  J2045-0435_X_map.win
! wwins: Wrote 2 windows to J2045-0435_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000224707 Jy
! Component: 100  -  total flux cleaned = -0.000284877 Jy
! Component: 150  -  total flux cleaned = -0.000382244 Jy
! Component: 200  -  total flux cleaned = -0.000408756 Jy
! Component: 250  -  total flux cleaned = -0.000458652 Jy
! Component: 300  -  total flux cleaned = -0.000517319 Jy
! Component: 350  -  total flux cleaned = -0.000517369 Jy
! Component: 400  -  total flux cleaned = -0.000517597 Jy
! Component: 450  -  total flux cleaned = -0.00049676 Jy
! Component: 500  -  total flux cleaned = -0.000476446 Jy
! Component: 550  -  total flux cleaned = -0.000466692 Jy
! Component: 600  -  total flux cleaned = -0.000466721 Jy
! Component: 650  -  total flux cleaned = -0.00046671 Jy
! Component: 700  -  total flux cleaned = -0.00048459 Jy
! Component: 750  -  total flux cleaned = -0.000502194 Jy
! Component: 800  -  total flux cleaned = -0.000502154 Jy
! Component: 850  -  total flux cleaned = -0.000485366 Jy
! Component: 900  -  total flux cleaned = -0.000468742 Jy
! Component: 950  -  total flux cleaned = -0.000460534 Jy
! Component: 1000  -  total flux cleaned = -0.000420659 Jy
! Component: 1050  -  total flux cleaned = -0.000404991 Jy
! Component: 1100  -  total flux cleaned = -0.000381911 Jy
! Component: 1150  -  total flux cleaned = -0.000374353 Jy
! Component: 1200  -  total flux cleaned = -0.000367011 Jy
! Component: 1250  -  total flux cleaned = -0.00035975 Jy
! Component: 1300  -  total flux cleaned = -0.000352556 Jy
! Component: 1350  -  total flux cleaned = -0.000352555 Jy
! Component: 1400  -  total flux cleaned = -0.000352541 Jy
! Component: 1450  -  total flux cleaned = -0.000345757 Jy
! Component: 1500  -  total flux cleaned = -0.000372444 Jy
! Component: 1550  -  total flux cleaned = -0.000365838 Jy
! Component: 1600  -  total flux cleaned = -0.000365847 Jy
! Component: 1650  -  total flux cleaned = -0.000365914 Jy
! Component: 1700  -  total flux cleaned = -0.000372141 Jy
! Component: 1750  -  total flux cleaned = -0.000378416 Jy
! Component: 1800  -  total flux cleaned = -0.000378589 Jy
! Component: 1850  -  total flux cleaned = -0.000378739 Jy
! Component: 1900  -  total flux cleaned = -0.000372935 Jy
! Component: 1950  -  total flux cleaned = -0.000390547 Jy
! Component: 2000  -  total flux cleaned = -0.000390531 Jy
! Component: 2050  -  total flux cleaned = -0.000396192 Jy
! Component: 2100  -  total flux cleaned = -0.00037383 Jy
! Component: 2150  -  total flux cleaned = -0.000362725 Jy
! Component: 2200  -  total flux cleaned = -0.000368195 Jy
! Component: 2250  -  total flux cleaned = -0.000368252 Jy
! Component: 2300  -  total flux cleaned = -0.000373582 Jy
! Component: 2350  -  total flux cleaned = -0.000362972 Jy
! Component: 2400  -  total flux cleaned = -0.000362923 Jy
! Component: 2450  -  total flux cleaned = -0.00036297 Jy
! Component: 2500  -  total flux cleaned = -0.000388404 Jy
! Component: 2550  -  total flux cleaned = -0.000388319 Jy
! Component: 2600  -  total flux cleaned = -0.000398233 Jy
! Component: 2650  -  total flux cleaned = -0.000408063 Jy
! Component: 2700  -  total flux cleaned = -0.000422653 Jy
! Component: 2750  -  total flux cleaned = -0.000441905 Jy
! Component: 2800  -  total flux cleaned = -0.000441876 Jy
! Component: 2850  -  total flux cleaned = -0.000451269 Jy
! Component: 2900  -  total flux cleaned = -0.000451248 Jy
! Component: 2950  -  total flux cleaned = -0.000446583 Jy
! Component: 3000  -  total flux cleaned = -0.000437416 Jy
! Component: 3050  -  total flux cleaned = -0.000441963 Jy
! Component: 3100  -  total flux cleaned = -0.000446479 Jy
! Component: 3150  -  total flux cleaned = -0.000450913 Jy
! Component: 3200  -  total flux cleaned = -0.000455359 Jy
! Component: 3250  -  total flux cleaned = -0.000451044 Jy
! Component: 3300  -  total flux cleaned = -0.000468415 Jy
! Component: 3350  -  total flux cleaned = -0.00045983 Jy
! Component: 3400  -  total flux cleaned = -0.000476866 Jy
! Component: 3450  -  total flux cleaned = -0.00046421 Jy
! Component: 3500  -  total flux cleaned = -0.000481001 Jy
! Component: 3550  -  total flux cleaned = -0.000493454 Jy
! Component: 3600  -  total flux cleaned = -0.00050165 Jy
! Component: 3650  -  total flux cleaned = -0.000493418 Jy
! Component: 3700  -  total flux cleaned = -0.000497418 Jy
! Component: 3750  -  total flux cleaned = -0.000497394 Jy
! Component: 3800  -  total flux cleaned = -0.000497393 Jy
! Component: 3850  -  total flux cleaned = -0.000497414 Jy
! Component: 3900  -  total flux cleaned = -0.000509289 Jy
! Component: 3950  -  total flux cleaned = -0.000505385 Jy
! Component: 4000  -  total flux cleaned = -0.00050932 Jy
! Component: 4050  -  total flux cleaned = -0.000513206 Jy
! Total flux subtracted in 4096 components = -0.00050554 Jy
! Clean residual min=-0.000263 max=0.000224 Jy/beam
! Clean residual mean=0.000001 rms=0.000075 Jy/beam
! Combined flux in latest and established models = 0.0343922 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 412 components and 0.0343922 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bm252b_uvs/J2045-0435_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.649 x 4.104 at 11.37 degrees (North through East)
! Clean map  min=-0.00065898  max=0.030393 Jy/beam
! Writing clean map to FITS file: /scr/pima/bm252b_uvs/J2045-0435_X_map.fits
wmodel /scr/pima/bm252b_uvs/J2045-0435_X_map.mod
! Writing 412 model components to file: /scr/pima/bm252b_uvs/J2045-0435_X_map.mod
wobs   /scr/pima/bm252b_uvs/J2045-0435_X_uvs.fits
! Writing UV FITS file: /scr/pima/bm252b_uvs/J2045-0435_X_uvs.fits
wwins  /scr/pima/bm252b_uvs/J2045-0435_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bm252b_uvs/J2045-0435_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0303933 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.36386e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.726856 0.726856 1.45371 2.90743 5.81485 11.6297 23.2594 46.5188 93.0376
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.03 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  412.736 
quit
! Quitting program
! Log file /scr/pima/bm252b_uvs/J2045-0435_X_dfm.log closed on Fri Jun 15 01:59:28 2018