! Started logfile: /scr/pima/bm252b_uvs/J2036-0629_X_dfm.log on Fri Jun 15 01:58:57 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.40599 obs /scr/pima/bm252b_uvs/J2036-0629_X_uva.fits ! Reading UV FITS file: /scr/pima/bm252b_uvs/J2036-0629_X_uva.fits ! AN table 1: 498 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.885587 visibilities/baseline/integration-bin. ! Found source: J2036-0629 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 79384 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2036-0629_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 857 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 857 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 857 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 857 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.244753Jy sigma=16.420118 ! Fit after self-cal, rms=0.326981Jy sigma=4.303370 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6179 mas, bmaj=1.649 mas, bpa=-0.7599 degrees ! Estimated noise=0.353332 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.51712 Jy ! Component: 100 - total flux cleaned = 0.63815 Jy ! Total flux subtracted in 100 components = 0.63815 Jy ! Clean residual min=-0.025224 max=0.074711 Jy/beam ! Clean residual mean=-0.000001 rms=0.002831 Jy/beam ! Combined flux in latest and established models = 0.638151 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.638151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195220Jy sigma=2.504782 ! Fit after self-cal, rms=0.195140Jy sigma=2.502583 ! Inverting map ! Added new window around map position (-3, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0725574 Jy ! Component: 100 - total flux cleaned = 0.117265 Jy ! Total flux subtracted in 100 components = 0.117265 Jy ! Clean residual min=-0.016173 max=0.035431 Jy/beam ! Clean residual mean=-0.000001 rms=0.001959 Jy/beam ! Combined flux in latest and established models = 0.755415 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 0.755415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142361Jy sigma=1.801047 ! Fit after self-cal, rms=0.140823Jy sigma=1.785719 ! Inverting map ! Added new window around map position (-0.6, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0390919 Jy ! Component: 100 - total flux cleaned = 0.0679971 Jy ! Total flux subtracted in 100 components = 0.0679971 Jy ! Clean residual min=-0.011769 max=0.020332 Jy/beam ! Clean residual mean=-0.000001 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 0.823412 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.823412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116361Jy sigma=1.439967 ! Fit after self-cal, rms=0.115796Jy sigma=1.435852 ! Inverting map ! Added new window around map position (-2.4, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240602 Jy ! Component: 100 - total flux cleaned = 0.0425558 Jy ! Total flux subtracted in 100 components = 0.0425558 Jy ! Clean residual min=-0.009073 max=0.012267 Jy/beam ! Clean residual mean=-0.000000 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.865968 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.865968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103679Jy sigma=1.260197 ! Fit after self-cal, rms=0.103349Jy sigma=1.257982 ! Inverting map ! Added new window around map position (-1.6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156708 Jy ! Component: 100 - total flux cleaned = 0.0281398 Jy ! Total flux subtracted in 100 components = 0.0281398 Jy ! Clean residual min=-0.008237 max=0.010125 Jy/beam ! Clean residual mean=-0.000000 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.894108 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 40 components and 0.894108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097005Jy sigma=1.164325 ! Fit after self-cal, rms=0.096817Jy sigma=1.163049 ! Inverting map ! Added new window around map position (-1.4, -7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113464 Jy ! Component: 100 - total flux cleaned = 0.0208216 Jy ! Total flux subtracted in 100 components = 0.0208216 Jy ! Clean residual min=-0.007759 max=0.007935 Jy/beam ! Clean residual mean=-0.000000 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.91493 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 0.914929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093507Jy sigma=1.114495 ! Fit after self-cal, rms=0.093415Jy sigma=1.113791 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8466 mas, bmaj=2.098 mas, bpa=-1.841 degrees ! Estimated noise=0.210971 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217456 Jy ! Component: 100 - total flux cleaned = 0.0364029 Jy ! Component: 150 - total flux cleaned = 0.0470136 Jy ! Component: 200 - total flux cleaned = 0.0548499 Jy ! Total flux subtracted in 200 components = 0.0548499 Jy ! Clean residual min=-0.005993 max=0.007989 Jy/beam ! Clean residual mean=0.000012 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.969779 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 77 components and 0.969779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087165Jy sigma=1.017046 ! Fit after self-cal, rms=0.086923Jy sigma=1.014229 ! Inverting map ! Added new window around map position (-28.6, 14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0089718 Jy ! Component: 100 - total flux cleaned = 0.0155746 Jy ! Component: 150 - total flux cleaned = 0.0210233 Jy ! Component: 200 - total flux cleaned = 0.025608 Jy ! Total flux subtracted in 200 components = 0.025608 Jy ! Clean residual min=-0.005394 max=0.005932 Jy/beam ! Clean residual mean=0.000009 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.995387 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 118 components and 0.995387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085643Jy sigma=0.992873 ! Fit after self-cal, rms=0.085540Jy sigma=0.991634 ! Inverting map ! Added new window around map position (-2.2, 18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0056773 Jy ! Component: 100 - total flux cleaned = 0.00990488 Jy ! Component: 150 - total flux cleaned = 0.013607 Jy ! Component: 200 - total flux cleaned = 0.0169202 Jy ! Total flux subtracted in 200 components = 0.0169202 Jy ! Clean residual min=-0.005076 max=0.005977 Jy/beam ! Clean residual mean=0.000008 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 1.01231 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 159 components and 1.01231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084951Jy sigma=0.982743 ! Fit after self-cal, rms=0.084928Jy sigma=0.982443 ! Inverting map ! Added new window around map position (-0.2, -15.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525256 Jy ! Component: 100 - total flux cleaned = 0.00854826 Jy ! Component: 150 - total flux cleaned = 0.0115148 Jy ! Component: 200 - total flux cleaned = 0.0139161 Jy ! Total flux subtracted in 200 components = 0.0139161 Jy ! Clean residual min=-0.004587 max=0.005090 Jy/beam ! Clean residual mean=0.000008 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 1.02622 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 194 components and 1.02622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084457Jy sigma=0.976113 ! Fit after self-cal, rms=0.084441Jy sigma=0.975808 ! Inverting map ! Added new window around map position (2.4, -18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00493259 Jy ! Component: 100 - total flux cleaned = 0.00794871 Jy ! Component: 150 - total flux cleaned = 0.0105828 Jy ! Component: 200 - total flux cleaned = 0.0129119 Jy ! Total flux subtracted in 200 components = 0.0129119 Jy ! Clean residual min=-0.004306 max=0.004409 Jy/beam ! Clean residual mean=0.000008 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 1.03914 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 237 components and 1.03913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084033Jy sigma=0.970609 ! Fit after self-cal, rms=0.084014Jy sigma=0.970386 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8466 x 2.098 at -1.841 degrees (North through East) ! Clean map min=-0.0042865 max=0.71811 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.04 KP 1.01 ! LA 0.99 MK 1.01 NL 0.99 OV 1.00 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.04 KP 1.01 ! LA 1.00 MK 1.00 NL 0.99 OV 0.99 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.03 KP 1.01 ! LA 0.99 MK 1.00 NL 0.99 OV 1.00 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.04 KP 1.01 ! LA 0.99 MK 1.00 NL 1.00 OV 1.00 ! PT 0.99 SC 1.02 ! ! ! Fit before self-cal, rms=0.084014Jy sigma=0.970386 ! Fit after self-cal, rms=0.084027Jy sigma=0.954814 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8499 mas, bmaj=2.102 mas, bpa=-1.837 degrees ! Estimated noise=0.211167 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00082633 Jy ! Component: 100 - total flux cleaned = -0.000409519 Jy ! Component: 150 - total flux cleaned = -0.000128561 Jy ! Component: 200 - total flux cleaned = 4.32629e-05 Jy ! Total flux subtracted in 200 components = 4.32629e-05 Jy ! Clean residual min=-0.003443 max=0.003701 Jy/beam ! Clean residual mean=0.000008 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 1.03918 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 260 components and 1.03918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083737Jy sigma=0.951979 ! Fit after self-cal, rms=0.083724Jy sigma=0.951737 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083724Jy sigma=0.951737 ! Fit after self-cal, rms=0.081440Jy sigma=0.923377 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8498 mas, bmaj=2.101 mas, bpa=-1.867 degrees ! Estimated noise=0.210924 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00179087 Jy ! Component: 100 - total flux cleaned = -0.00157825 Jy ! Component: 150 - total flux cleaned = -0.00126321 Jy ! Component: 200 - total flux cleaned = -0.000918469 Jy ! Total flux subtracted in 200 components = -0.000918469 Jy ! Clean residual min=-0.003054 max=0.003558 Jy/beam ! Clean residual mean=0.000007 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 1.03826 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 280 components and 1.03826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081316Jy sigma=0.921688 ! Fit after self-cal, rms=0.081317Jy sigma=0.921635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25.2, 15.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359197 Jy ! Component: 100 - total flux cleaned = 0.00557197 Jy ! Component: 150 - total flux cleaned = 0.00615974 Jy ! Component: 200 - total flux cleaned = 0.00644744 Jy ! Total flux subtracted in 200 components = 0.00644744 Jy ! Clean residual min=-0.002928 max=0.002921 Jy/beam ! Clean residual mean=0.000006 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 1.04471 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 312 components and 1.04471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081135Jy sigma=0.918695 ! Fit after self-cal, rms=0.081115Jy sigma=0.918435 ! Inverting map ! Added new window around map position (5.4, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236348 Jy ! Component: 100 - total flux cleaned = 0.00310406 Jy ! Component: 150 - total flux cleaned = 0.00358616 Jy ! Component: 200 - total flux cleaned = 0.0040143 Jy ! Total flux subtracted in 200 components = 0.0040143 Jy ! Clean residual min=-0.002964 max=0.002885 Jy/beam ! Clean residual mean=0.000006 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 1.04872 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 341 components and 1.04872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080908Jy sigma=0.916797 ! Fit after self-cal, rms=0.080898Jy sigma=0.916646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080898Jy sigma=0.916646 ! Fit after self-cal, rms=0.075554Jy sigma=0.853124 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8492 mas, bmaj=2.1 mas, bpa=-1.882 degrees ! Estimated noise=0.21106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000472082 Jy ! Component: 100 - total flux cleaned = -0.000329516 Jy ! Component: 150 - total flux cleaned = -0.000202579 Jy ! Component: 200 - total flux cleaned = -0.0001471 Jy ! Total flux subtracted in 200 components = -0.0001471 Jy ! Clean residual min=-0.001736 max=0.002122 Jy/beam ! Clean residual mean=0.000004 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 1.04857 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 366 components and 1.04857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075457Jy sigma=0.851419 ! Fit after self-cal, rms=0.075471Jy sigma=0.851348 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-31, 15.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182654 Jy ! Component: 100 - total flux cleaned = 0.00289822 Jy ! Component: 150 - total flux cleaned = 0.00338452 Jy ! Component: 200 - total flux cleaned = 0.00358795 Jy ! Total flux subtracted in 200 components = 0.00358795 Jy ! Clean residual min=-0.001607 max=0.001848 Jy/beam ! Clean residual mean=0.000003 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 1.05216 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 388 components and 1.05216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075377Jy sigma=0.849948 ! Fit after self-cal, rms=0.075373Jy sigma=0.849897 ! Inverting map ! Added new window around map position (-1.2, -27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148536 Jy ! Component: 100 - total flux cleaned = 0.00209057 Jy ! Component: 150 - total flux cleaned = 0.00260388 Jy ! Component: 200 - total flux cleaned = 0.00282442 Jy ! Total flux subtracted in 200 components = 0.00282442 Jy ! Clean residual min=-0.001505 max=0.001676 Jy/beam ! Clean residual mean=0.000003 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 1.05499 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 404 components and 1.05499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075307Jy sigma=0.848935 ! Fit after self-cal, rms=0.075305Jy sigma=0.848914 ! Inverting map ! Added new window around map position (-10, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120367 Jy ! Component: 100 - total flux cleaned = 0.00177727 Jy ! Component: 150 - total flux cleaned = 0.0022344 Jy ! Component: 200 - total flux cleaned = 0.00239401 Jy ! Total flux subtracted in 200 components = 0.00239401 Jy ! Clean residual min=-0.001497 max=0.001357 Jy/beam ! Clean residual mean=0.000003 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 1.05738 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 422 components and 1.05738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075249Jy sigma=0.848218 ! Fit after self-cal, rms=0.075247Jy sigma=0.848197 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075247Jy sigma=0.848197 ! Fit after self-cal, rms=0.075274Jy sigma=0.845443 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.181 mas, bmaj=3.808 mas, bpa=4.832 degrees ! Estimated noise=0.269983 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106423 Jy ! Component: 100 - total flux cleaned = 0.00194832 Jy ! Component: 150 - total flux cleaned = 0.00255327 Jy ! Component: 200 - total flux cleaned = 0.00309495 Jy ! Total flux subtracted in 200 components = 0.00309495 Jy ! Clean residual min=-0.001911 max=0.001748 Jy/beam ! Clean residual mean=0.000005 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 1.06047 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 462 components and 1.06047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075238Jy sigma=0.844754 ! Fit after self-cal, rms=0.075237Jy sigma=0.844715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000822646 Jy ! Component: 100 - total flux cleaned = 0.0014217 Jy ! Component: 150 - total flux cleaned = 0.00177246 Jy ! Component: 200 - total flux cleaned = 0.00202567 Jy ! Total flux subtracted in 200 components = 0.00202567 Jy ! Clean residual min=-0.001816 max=0.001639 Jy/beam ! Clean residual mean=0.000004 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 1.0625 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 490 components and 1.0625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075223Jy sigma=0.844457 ! Fit after self-cal, rms=0.075222Jy sigma=0.844448 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.849 mas, bmaj=2.1 mas, bpa=-1.862 degrees ! Estimated noise=0.21095 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.849 x 2.1 at -1.862 degrees (North through East) ! Clean map min=-0.001255 max=0.71905 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075222Jy sigma=0.844448 ! Fit after self-cal, rms=0.067227Jy sigma=0.733459 ! Inverting map and beam ! Estimated beam: bmin=0.8488 mas, bmaj=2.099 mas, bpa=-1.864 degrees ! Estimated noise=0.210806 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000688503 Jy ! Component: 100 - total flux cleaned = -0.000937354 Jy ! Component: 150 - total flux cleaned = -0.000976066 Jy ! Component: 200 - total flux cleaned = -0.000977809 Jy ! Total flux subtracted in 200 components = -0.000977809 Jy ! Clean residual min=-0.001353 max=0.001052 Jy/beam ! Clean residual mean=0.000002 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 1.06152 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 508 components and 1.06152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067183Jy sigma=0.732801 ! Fit after self-cal, rms=0.067181Jy sigma=0.732770 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000331774 Jy ! Component: 100 - total flux cleaned = -0.000300399 Jy ! Component: 150 - total flux cleaned = -0.000240704 Jy ! Component: 200 - total flux cleaned = -0.000184438 Jy ! Total flux subtracted in 200 components = -0.000184438 Jy ! Clean residual min=-0.001418 max=0.001013 Jy/beam ! Clean residual mean=0.000002 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 1.06134 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 525 components and 1.06134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067157Jy sigma=0.732395 ! Fit after self-cal, rms=0.067156Jy sigma=0.732389 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067156Jy sigma=0.732389 ! Fit after self-cal, rms=0.067137Jy sigma=0.732314 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6188 mas, bmaj=1.647 mas, bpa=-0.7656 degrees ! Estimated noise=0.357248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.521711 Jy ! Component: 100 - total flux cleaned = 0.653775 Jy ! Component: 150 - total flux cleaned = 0.72599 Jy ! Component: 200 - total flux cleaned = 0.775464 Jy ! Total flux subtracted in 200 components = 0.775464 Jy ! Clean residual min=-0.013582 max=0.027234 Jy/beam ! Clean residual mean=-0.000000 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.775464 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.775464 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8487 mas, bmaj=2.099 mas, bpa=-1.862 degrees ! Estimated noise=0.210722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0640357 Jy ! Component: 100 - total flux cleaned = 0.106009 Jy ! Component: 150 - total flux cleaned = 0.134799 Jy ! Component: 200 - total flux cleaned = 0.155055 Jy ! Total flux subtracted in 200 components = 0.155055 Jy ! Clean residual min=-0.005824 max=0.011336 Jy/beam ! Clean residual mean=0.000012 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.930519 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 46 components and 0.930519 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146857 Jy ! Component: 100 - total flux cleaned = 0.0263019 Jy ! Component: 150 - total flux cleaned = 0.0358568 Jy ! Component: 200 - total flux cleaned = 0.0438101 Jy ! Total flux subtracted in 200 components = 0.0438101 Jy ! Clean residual min=-0.003440 max=0.005506 Jy/beam ! Clean residual mean=0.000009 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.97433 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 99 components and 0.974329 Jy ! Inverting map ! Added new window around map position (-3.6, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688376 Jy ! Component: 100 - total flux cleaned = 0.0127664 Jy ! Component: 150 - total flux cleaned = 0.0178899 Jy ! Component: 200 - total flux cleaned = 0.0223923 Jy ! Total flux subtracted in 200 components = 0.0223923 Jy ! Clean residual min=-0.002455 max=0.003081 Jy/beam ! Clean residual mean=0.000007 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.996722 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 149 components and 0.996721 Jy ! Inverting map ! Added new window around map position (-26.8, 15.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403011 Jy ! Component: 100 - total flux cleaned = 0.00763226 Jy ! Component: 150 - total flux cleaned = 0.0109027 Jy ! Component: 200 - total flux cleaned = 0.0138925 Jy ! Total flux subtracted in 200 components = 0.0138925 Jy ! Clean residual min=-0.002037 max=0.002181 Jy/beam ! Clean residual mean=0.000005 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 1.01061 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 200 components and 1.01061 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=3.806 mas, bpa=4.846 degrees ! Estimated noise=0.269867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00522978 Jy ! Component: 100 - total flux cleaned = 0.00944489 Jy ! Component: 150 - total flux cleaned = 0.013082 Jy ! Component: 200 - total flux cleaned = 0.0162868 Jy ! Total flux subtracted in 200 components = 0.0162868 Jy ! Clean residual min=-0.002586 max=0.002363 Jy/beam ! Clean residual mean=0.000007 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 1.0269 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285755 Jy ! Component: 100 - total flux cleaned = 0.00542533 Jy ! Component: 150 - total flux cleaned = 0.00775804 Jy ! Component: 200 - total flux cleaned = 0.00989538 Jy ! Total flux subtracted in 200 components = 0.00989538 Jy ! Clean residual min=-0.002052 max=0.002050 Jy/beam ! Clean residual mean=0.000005 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 1.0368 Jy ! Adding 175 model components to the UV plane model. ! The established model now contains 353 components and 1.0368 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8487 mas, bmaj=2.099 mas, bpa=-1.862 degrees ! Estimated noise=0.210722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149436 Jy ! Component: 100 - total flux cleaned = 0.00278452 Jy ! Component: 150 - total flux cleaned = 0.00404542 Jy ! Component: 200 - total flux cleaned = 0.00515559 Jy ! Total flux subtracted in 200 components = 0.00515559 Jy ! Clean residual min=-0.001536 max=0.001503 Jy/beam ! Clean residual mean=0.000002 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 1.04195 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 387 components and 1.04195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067216Jy sigma=0.733777 ! Fit after self-cal, rms=0.067162Jy sigma=0.732948 wmodel J2036-0629_X_map.mod ! Writing 387 model components to file: J2036-0629_X_map.mod wobs J2036-0629_X_uvs.fits ! Writing UV FITS file: J2036-0629_X_uvs.fits wwins J2036-0629_X_map.win ! wwins: Wrote 17 windows to J2036-0629_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000526662 Jy ! Component: 100 - total flux cleaned = -0.00052639 Jy ! Component: 150 - total flux cleaned = -0.000547616 Jy ! Component: 200 - total flux cleaned = -0.00054771 Jy ! Component: 250 - total flux cleaned = -0.000507551 Jy ! Component: 300 - total flux cleaned = -0.000488455 Jy ! Component: 350 - total flux cleaned = -0.000431695 Jy ! Component: 400 - total flux cleaned = -0.000395071 Jy ! Component: 450 - total flux cleaned = -0.000305098 Jy ! Component: 500 - total flux cleaned = -0.00021727 Jy ! Component: 550 - total flux cleaned = -0.000131818 Jy ! Component: 600 - total flux cleaned = -9.83681e-05 Jy ! Component: 650 - total flux cleaned = 1.66632e-05 Jy ! Component: 700 - total flux cleaned = 3.26063e-05 Jy ! Component: 750 - total flux cleaned = 0.000144079 Jy ! Component: 800 - total flux cleaned = 0.000175383 Jy ! Component: 850 - total flux cleaned = 0.000237315 Jy ! Component: 900 - total flux cleaned = 0.000328699 Jy ! Component: 950 - total flux cleaned = 0.000373612 Jy ! Component: 1000 - total flux cleaned = 0.000403117 Jy ! Component: 1050 - total flux cleaned = 0.000476189 Jy ! Component: 1100 - total flux cleaned = 0.000490339 Jy ! Component: 1150 - total flux cleaned = 0.00044777 Jy ! Component: 1200 - total flux cleaned = 0.000574894 Jy ! Component: 1250 - total flux cleaned = 0.000588725 Jy ! Component: 1300 - total flux cleaned = 0.000671462 Jy ! Component: 1350 - total flux cleaned = 0.000739436 Jy ! Component: 1400 - total flux cleaned = 0.000860542 Jy ! Component: 1450 - total flux cleaned = 0.000913687 Jy ! Component: 1500 - total flux cleaned = 0.00104548 Jy ! Component: 1550 - total flux cleaned = 0.00112364 Jy ! Component: 1600 - total flux cleaned = 0.00117526 Jy ! Component: 1650 - total flux cleaned = 0.00125206 Jy ! Component: 1700 - total flux cleaned = 0.00130268 Jy ! Component: 1750 - total flux cleaned = 0.00132757 Jy ! Component: 1800 - total flux cleaned = 0.00134008 Jy ! Component: 1850 - total flux cleaned = 0.00136484 Jy ! Component: 1900 - total flux cleaned = 0.00138938 Jy ! Component: 1950 - total flux cleaned = 0.00142607 Jy ! Component: 2000 - total flux cleaned = 0.00149831 Jy ! Component: 2050 - total flux cleaned = 0.0014863 Jy ! Component: 2100 - total flux cleaned = 0.00151019 Jy ! Component: 2150 - total flux cleaned = 0.00158097 Jy ! Component: 2200 - total flux cleaned = 0.00158105 Jy ! Component: 2250 - total flux cleaned = 0.00162749 Jy ! Component: 2300 - total flux cleaned = 0.00163893 Jy ! Component: 2350 - total flux cleaned = 0.00169608 Jy ! Component: 2400 - total flux cleaned = 0.00168468 Jy ! Component: 2450 - total flux cleaned = 0.0017186 Jy ! Component: 2500 - total flux cleaned = 0.00176353 Jy ! Component: 2550 - total flux cleaned = 0.00171905 Jy ! Component: 2600 - total flux cleaned = 0.0017192 Jy ! Component: 2650 - total flux cleaned = 0.00179632 Jy ! Component: 2700 - total flux cleaned = 0.00175251 Jy ! Component: 2750 - total flux cleaned = 0.00176349 Jy ! Component: 2800 - total flux cleaned = 0.00186079 Jy ! Component: 2850 - total flux cleaned = 0.00178541 Jy ! Component: 2900 - total flux cleaned = 0.00188158 Jy ! Component: 2950 - total flux cleaned = 0.00183907 Jy ! Component: 3000 - total flux cleaned = 0.00188135 Jy ! Component: 3050 - total flux cleaned = 0.00191288 Jy ! Component: 3100 - total flux cleaned = 0.00194427 Jy ! Component: 3150 - total flux cleaned = 0.00196499 Jy ! Component: 3200 - total flux cleaned = 0.00195467 Jy ! Component: 3250 - total flux cleaned = 0.00196503 Jy ! Component: 3300 - total flux cleaned = 0.00200604 Jy ! Component: 3350 - total flux cleaned = 0.00200608 Jy ! Component: 3400 - total flux cleaned = 0.00208723 Jy ! Component: 3450 - total flux cleaned = 0.00209728 Jy ! Component: 3500 - total flux cleaned = 0.00217757 Jy ! Component: 3550 - total flux cleaned = 0.00217759 Jy ! Component: 3600 - total flux cleaned = 0.00214783 Jy ! Component: 3650 - total flux cleaned = 0.00218734 Jy ! Component: 3700 - total flux cleaned = 0.00222683 Jy ! Component: 3750 - total flux cleaned = 0.00223664 Jy ! Component: 3800 - total flux cleaned = 0.00225622 Jy ! Component: 3850 - total flux cleaned = 0.0022562 Jy ! Component: 3900 - total flux cleaned = 0.00229495 Jy ! Component: 3950 - total flux cleaned = 0.00229498 Jy ! Component: 4000 - total flux cleaned = 0.00230462 Jy ! Component: 4050 - total flux cleaned = 0.00231416 Jy ! Total flux subtracted in 4096 components = 0.00237125 Jy ! Clean residual min=-0.000582 max=0.000515 Jy/beam ! Clean residual mean=0.000001 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 1.04432 Jy keep ! Adding 343 model components to the UV plane model. ! The established model now contains 727 components and 1.04432 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/bm252b_uvs/J2036-0629_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8487 x 2.099 at -1.862 degrees (North through East) ! Clean map min=-0.0013589 max=0.72035 Jy/beam ! Writing clean map to FITS file: /scr/pima/bm252b_uvs/J2036-0629_X_map.fits wmodel /scr/pima/bm252b_uvs/J2036-0629_X_map.mod ! Writing 727 model components to file: /scr/pima/bm252b_uvs/J2036-0629_X_map.mod wobs /scr/pima/bm252b_uvs/J2036-0629_X_uvs.fits ! Writing UV FITS file: /scr/pima/bm252b_uvs/J2036-0629_X_uvs.fits wwins /scr/pima/bm252b_uvs/J2036-0629_X_map.win ! wwins: Wrote 18 windows to /scr/pima/bm252b_uvs/J2036-0629_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.720351 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000174876 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0728294 0.0728294 0.145659 0.291317 0.582635 1.16527 2.33054 4.66108 9.32216 18.6443 37.2886 74.5773 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.72 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4119.22 quit ! Quitting program ! Log file /scr/pima/bm252b_uvs/J2036-0629_X_dfm.log closed on Fri Jun 15 01:59:08 2018