! Started logfile: /scr/pima/bm252a_uvs/J2059-0238_X_dfm.log on Fri Jun 15 01:06:14 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.40599
obs     /scr/pima/bm252a_uvs/J2059-0238_X_uva.fits
! Reading UV FITS file: /scr/pima/bm252a_uvs/J2059-0238_X_uva.fits
! AN table 1: 188 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.915721 visibilities/baseline/integration-bin.
! Found source: J2059-0238
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09      1.6e+07          1      1.6e+07
!  02        2  8.47599e+09      1.6e+07          1      1.6e+07
!  03        3  8.79099e+09      1.6e+07          1      1.6e+07
!  04        4  8.89599e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 30988 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2059-0238_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 99 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 99 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 99 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 99 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001813Jy  sigma=18.520887
! Fit after  self-cal, rms=0.975995Jy  sigma=18.045798
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7368 mas, bmaj=1.895 mas, bpa=-5.295 degrees
! Estimated noise=0.387315 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206512 Jy
! Component: 100  -  total flux cleaned = 0.0251558 Jy
! Total flux subtracted in 100 components = 0.0251558 Jy
! Clean residual min=-0.001661 max=0.001706 Jy/beam
! Clean residual mean=-0.000000 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.0251558 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.0251558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055703Jy  sigma=0.974811
! Fit after  self-cal, rms=0.053878Jy  sigma=0.939778
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00412785 Jy
! Component: 100  -  total flux cleaned = 0.00411221 Jy
! Total flux subtracted in 100 components = 0.00411221 Jy
! Clean residual min=-0.001542 max=0.001601 Jy/beam
! Clean residual mean=-0.000000 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.029268 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.029268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053691Jy  sigma=0.936219
! Fit after  self-cal, rms=0.053669Jy  sigma=0.935916
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9012 mas, bmaj=2.224 mas, bpa=-5.247 degrees
! Estimated noise=0.223007 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000702351 Jy
! Component: 100  -  total flux cleaned = -0.000837795 Jy
! Component: 150  -  total flux cleaned = -0.00091874 Jy
! Component: 200  -  total flux cleaned = -0.00100079 Jy
! Total flux subtracted in 200 components = -0.00100079 Jy
! Clean residual min=-0.001039 max=0.001129 Jy/beam
! Clean residual mean=-0.000000 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.0282672 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.0282672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053657Jy  sigma=0.935707
! Fit after  self-cal, rms=0.053639Jy  sigma=0.935644
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9012 x 2.224 at -5.247 degrees (North through East)
! Clean map  min=-0.00099897  max=0.030007 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.04     KP        0.97     
!   LA        1.09     MK        1.00     NL        1.02     OV        1.00     
!   PT        1.08     SC        1.02     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        1.08     
!   LA        1.12     MK        0.97     NL        0.99     OV        0.99     
!   PT        1.05     SC        1.04     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.88     HN        0.96     KP        1.07     
!   LA        1.06     MK        0.95     NL        0.95     OV        0.92     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        0.91     HN        0.98     KP        1.10     
!   LA        1.02     MK        0.92     NL        0.93     OV        1.01     
!   PT        1.03     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.053639Jy  sigma=0.935644
! Fit after  self-cal, rms=0.052021Jy  sigma=0.934005
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8921 mas, bmaj=2.199 mas, bpa=-5.516 degrees
! Estimated noise=0.220618 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.94506e-05 Jy
! Component: 100  -  total flux cleaned = 7.0186e-05 Jy
! Component: 150  -  total flux cleaned = 8.33628e-05 Jy
! Component: 200  -  total flux cleaned = 9.51934e-05 Jy
! Total flux subtracted in 200 components = 9.51934e-05 Jy
! Clean residual min=-0.000893 max=0.000871 Jy/beam
! Clean residual mean=-0.000000 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.0283624 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.0283624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052017Jy  sigma=0.933985
! Fit after  self-cal, rms=0.052005Jy  sigma=0.933545
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052005Jy  sigma=0.933545
! Fit after  self-cal, rms=0.051911Jy  sigma=0.933074
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8899 mas, bmaj=2.19 mas, bpa=-5.635 degrees
! Estimated noise=0.219906 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.38816e-05 Jy
! Component: 100  -  total flux cleaned = 1.76733e-05 Jy
! Component: 150  -  total flux cleaned = 3.4429e-05 Jy
! Component: 200  -  total flux cleaned = 4.4497e-05 Jy
! Total flux subtracted in 200 components = 4.4497e-05 Jy
! Clean residual min=-0.000912 max=0.000841 Jy/beam
! Clean residual mean=-0.000000 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.0284069 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 23 components and 0.0284069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051908Jy  sigma=0.933062
! Fit after  self-cal, rms=0.051920Jy  sigma=0.932796
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.51903e-07 Jy
! Component: 100  -  total flux cleaned = 1.0502e-05 Jy
! Component: 150  -  total flux cleaned = 1.92583e-05 Jy
! Component: 200  -  total flux cleaned = 3.13422e-05 Jy
! Total flux subtracted in 200 components = 3.13422e-05 Jy
! Clean residual min=-0.000933 max=0.000861 Jy/beam
! Clean residual mean=-0.000000 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.0284382 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 24 components and 0.0284382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051919Jy  sigma=0.932787
! Fit after  self-cal, rms=0.051916Jy  sigma=0.932719
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051916Jy  sigma=0.932719
! Fit after  self-cal, rms=0.053191Jy  sigma=0.932260
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8892 mas, bmaj=2.185 mas, bpa=-5.619 degrees
! Estimated noise=0.219592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.41833e-05 Jy
! Component: 100  -  total flux cleaned = 5.94634e-07 Jy
! Component: 150  -  total flux cleaned = 1.02493e-05 Jy
! Component: 200  -  total flux cleaned = 1.91238e-05 Jy
! Total flux subtracted in 200 components = 1.91238e-05 Jy
! Clean residual min=-0.000895 max=0.000850 Jy/beam
! Clean residual mean=-0.000000 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.0284574 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 31 components and 0.0284574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053190Jy  sigma=0.932255
! Fit after  self-cal, rms=0.053225Jy  sigma=0.932133
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-48.6, 18.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000548944 Jy
! Component: 100  -  total flux cleaned = 0.000618034 Jy
! Component: 150  -  total flux cleaned = 0.000685401 Jy
! Component: 200  -  total flux cleaned = 0.000704831 Jy
! Total flux subtracted in 200 components = 0.000704831 Jy
! Clean residual min=-0.000878 max=0.000771 Jy/beam
! Clean residual mean=-0.000000 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.0291622 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 42 components and 0.0291622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053214Jy  sigma=0.931926
! Fit after  self-cal, rms=0.053210Jy  sigma=0.931833
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053210Jy  sigma=0.931833
! Fit after  self-cal, rms=0.053356Jy  sigma=0.931794
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.178 mas, bmaj=3.602 mas, bpa=3.192 degrees
! Estimated noise=0.26948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000484243 Jy
! Component: 100  -  total flux cleaned = 0.000596809 Jy
! Component: 150  -  total flux cleaned = 0.000652022 Jy
! Component: 200  -  total flux cleaned = 0.000671791 Jy
! Total flux subtracted in 200 components = 0.000671791 Jy
! Clean residual min=-0.001018 max=0.000836 Jy/beam
! Clean residual mean=-0.000000 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.029834 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 54 components and 0.029834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053353Jy  sigma=0.931724
! Fit after  self-cal, rms=0.053359Jy  sigma=0.931660
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000276257 Jy
! Component: 100  -  total flux cleaned = 0.000318191 Jy
! Component: 150  -  total flux cleaned = 0.00036437 Jy
! Component: 200  -  total flux cleaned = 0.000381333 Jy
! Total flux subtracted in 200 components = 0.000381333 Jy
! Clean residual min=-0.001021 max=0.000838 Jy/beam
! Clean residual mean=-0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0302153 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 0.0302153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053357Jy  sigma=0.931626
! Fit after  self-cal, rms=0.053353Jy  sigma=0.931556
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.887 mas, bmaj=2.181 mas, bpa=-5.609 degrees
! Estimated noise=0.219175 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.887 x 2.181 at -5.609 degrees (North through East)
! Clean map  min=-0.00083333  max=0.029225 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7287 mas, bmaj=1.863 mas, bpa=-5.659 degrees
! Estimated noise=0.370705 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0229226 Jy
! Component: 100  -  total flux cleaned = 0.0279503 Jy
! Component: 150  -  total flux cleaned = 0.0289967 Jy
! Component: 200  -  total flux cleaned = 0.0289394 Jy
! Total flux subtracted in 200 components = 0.0289394 Jy
! Clean residual min=-0.001412 max=0.001452 Jy/beam
! Clean residual mean=-0.000000 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.0289394 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0289394 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.887 mas, bmaj=2.181 mas, bpa=-5.609 degrees
! Estimated noise=0.219175 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000574858 Jy
! Component: 100  -  total flux cleaned = 0.000809739 Jy
! Component: 150  -  total flux cleaned = 0.000998399 Jy
! Component: 200  -  total flux cleaned = 0.00108654 Jy
! Total flux subtracted in 200 components = 0.00108654 Jy
! Clean residual min=-0.000894 max=0.000763 Jy/beam
! Clean residual mean=-0.000000 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.030026 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 28 components and 0.030026 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.178 mas, bmaj=3.602 mas, bpa=3.192 degrees
! Estimated noise=0.26948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000301552 Jy
! Component: 100  -  total flux cleaned = 0.000441276 Jy
! Component: 150  -  total flux cleaned = 0.000542341 Jy
! Component: 200  -  total flux cleaned = 0.00060435 Jy
! Total flux subtracted in 200 components = 0.00060435 Jy
! Clean residual min=-0.001036 max=0.000807 Jy/beam
! Clean residual mean=-0.000000 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.0306303 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.47411e-05 Jy
! Component: 100  -  total flux cleaned = 3.44284e-05 Jy
! Component: 150  -  total flux cleaned = 4.03758e-05 Jy
! Component: 200  -  total flux cleaned = 5.12219e-05 Jy
! Total flux subtracted in 200 components = 5.12219e-05 Jy
! Clean residual min=-0.001032 max=0.000815 Jy/beam
! Clean residual mean=-0.000000 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.0306815 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 40 components and 0.0306815 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.887 mas, bmaj=2.181 mas, bpa=-5.609 degrees
! Estimated noise=0.219175 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.45584e-05 Jy
! Component: 100  -  total flux cleaned = -0.000105519 Jy
! Component: 150  -  total flux cleaned = -0.000116432 Jy
! Component: 200  -  total flux cleaned = -0.000155189 Jy
! Total flux subtracted in 200 components = -0.000155189 Jy
! Clean residual min=-0.000857 max=0.000762 Jy/beam
! Clean residual mean=-0.000000 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.0305264 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 48 components and 0.0305264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053350Jy  sigma=0.931531
! Fit after  self-cal, rms=0.053350Jy  sigma=0.931489
wmodel J2059-0238_X_map.mod
! Writing 48 model components to file: J2059-0238_X_map.mod
wobs   J2059-0238_X_uvs.fits
! Writing UV FITS file: J2059-0238_X_uvs.fits
wwins  J2059-0238_X_map.win
! wwins: Wrote 2 windows to J2059-0238_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000335174 Jy
! Component: 100  -  total flux cleaned = -0.000335829 Jy
! Component: 150  -  total flux cleaned = -0.00034918 Jy
! Component: 200  -  total flux cleaned = -0.000310344 Jy
! Component: 250  -  total flux cleaned = -0.000247409 Jy
! Component: 300  -  total flux cleaned = -0.000198547 Jy
! Component: 350  -  total flux cleaned = -0.000186708 Jy
! Component: 400  -  total flux cleaned = -0.000175131 Jy
! Component: 450  -  total flux cleaned = -0.000163533 Jy
! Component: 500  -  total flux cleaned = -9.61126e-05 Jy
! Component: 550  -  total flux cleaned = -4.09151e-05 Jy
! Component: 600  -  total flux cleaned = 2.4093e-05 Jy
! Component: 650  -  total flux cleaned = 0.000120014 Jy
! Component: 700  -  total flux cleaned = 0.000182732 Jy
! Component: 750  -  total flux cleaned = 0.000244703 Jy
! Component: 800  -  total flux cleaned = 0.000336352 Jy
! Component: 850  -  total flux cleaned = 0.000396605 Jy
! Component: 900  -  total flux cleaned = 0.000475772 Jy
! Component: 950  -  total flux cleaned = 0.000553932 Jy
! Component: 1000  -  total flux cleaned = 0.000621306 Jy
! Component: 1050  -  total flux cleaned = 0.00064983 Jy
! Component: 1100  -  total flux cleaned = 0.000697042 Jy
! Component: 1150  -  total flux cleaned = 0.00073436 Jy
! Component: 1200  -  total flux cleaned = 0.000789809 Jy
! Component: 1250  -  total flux cleaned = 0.000798952 Jy
! Component: 1300  -  total flux cleaned = 0.000817168 Jy
! Component: 1350  -  total flux cleaned = 0.000844037 Jy
! Component: 1400  -  total flux cleaned = 0.000870444 Jy
! Component: 1450  -  total flux cleaned = 0.000861684 Jy
! Component: 1500  -  total flux cleaned = 0.000887774 Jy
! Component: 1550  -  total flux cleaned = 0.000879228 Jy
! Component: 1600  -  total flux cleaned = 0.000913296 Jy
! Component: 1650  -  total flux cleaned = 0.000913259 Jy
! Component: 1700  -  total flux cleaned = 0.000921693 Jy
! Component: 1750  -  total flux cleaned = 0.000929945 Jy
! Component: 1800  -  total flux cleaned = 0.000921763 Jy
! Component: 1850  -  total flux cleaned = 0.000929963 Jy
! Component: 1900  -  total flux cleaned = 0.000970376 Jy
! Component: 1950  -  total flux cleaned = 0.00101038 Jy
! Component: 2000  -  total flux cleaned = 0.00097853 Jy
! Component: 2050  -  total flux cleaned = 0.000994338 Jy
! Component: 2100  -  total flux cleaned = 0.00101779 Jy
! Component: 2150  -  total flux cleaned = 0.00103322 Jy
! Component: 2200  -  total flux cleaned = 0.00104097 Jy
! Component: 2250  -  total flux cleaned = 0.00103323 Jy
! Component: 2300  -  total flux cleaned = 0.00105606 Jy
! Component: 2350  -  total flux cleaned = 0.0010863 Jy
! Component: 2400  -  total flux cleaned = 0.00109372 Jy
! Component: 2450  -  total flux cleaned = 0.00112344 Jy
! Component: 2500  -  total flux cleaned = 0.00113829 Jy
! Component: 2550  -  total flux cleaned = 0.00115298 Jy
! Component: 2600  -  total flux cleaned = 0.00115294 Jy
! Component: 2650  -  total flux cleaned = 0.00120362 Jy
! Component: 2700  -  total flux cleaned = 0.00121076 Jy
! Component: 2750  -  total flux cleaned = 0.0012035 Jy
! Component: 2800  -  total flux cleaned = 0.00121775 Jy
! Component: 2850  -  total flux cleaned = 0.00121069 Jy
! Component: 2900  -  total flux cleaned = 0.00121771 Jy
! Component: 2950  -  total flux cleaned = 0.00124549 Jy
! Component: 3000  -  total flux cleaned = 0.00123852 Jy
! Component: 3050  -  total flux cleaned = 0.00122482 Jy
! Component: 3100  -  total flux cleaned = 0.00124526 Jy
! Component: 3150  -  total flux cleaned = 0.00125886 Jy
! Component: 3200  -  total flux cleaned = 0.00129251 Jy
! Component: 3250  -  total flux cleaned = 0.0012925 Jy
! Component: 3300  -  total flux cleaned = 0.00128589 Jy
! Component: 3350  -  total flux cleaned = 0.00129912 Jy
! Component: 3400  -  total flux cleaned = 0.00132535 Jy
! Component: 3450  -  total flux cleaned = 0.00131881 Jy
! Component: 3500  -  total flux cleaned = 0.00133183 Jy
! Component: 3550  -  total flux cleaned = 0.00134475 Jy
! Component: 3600  -  total flux cleaned = 0.00135758 Jy
! Component: 3650  -  total flux cleaned = 0.00135116 Jy
! Component: 3700  -  total flux cleaned = 0.00135122 Jy
! Component: 3750  -  total flux cleaned = 0.00137015 Jy
! Component: 3800  -  total flux cleaned = 0.00137644 Jy
! Component: 3850  -  total flux cleaned = 0.00137644 Jy
! Component: 3900  -  total flux cleaned = 0.00135782 Jy
! Component: 3950  -  total flux cleaned = 0.00137636 Jy
! Component: 4000  -  total flux cleaned = 0.00137635 Jy
! Component: 4050  -  total flux cleaned = 0.00134577 Jy
! Total flux subtracted in 4096 components = 0.00135792 Jy
! Clean residual min=-0.000438 max=0.000369 Jy/beam
! Clean residual mean=0.000000 rms=0.000108 Jy/beam
! Combined flux in latest and established models = 0.0318843 Jy
keep
! Adding 304 model components to the UV plane model.
! The established model now contains 352 components and 0.0318843 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bm252a_uvs/J2059-0238_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.887 x 2.181 at -5.609 degrees (North through East)
! Clean map  min=-0.00068177  max=0.029114 Jy/beam
! Writing clean map to FITS file: /scr/pima/bm252a_uvs/J2059-0238_X_map.fits
wmodel /scr/pima/bm252a_uvs/J2059-0238_X_map.mod
! Writing 352 model components to file: /scr/pima/bm252a_uvs/J2059-0238_X_map.mod
wobs   /scr/pima/bm252a_uvs/J2059-0238_X_uvs.fits
! Writing UV FITS file: /scr/pima/bm252a_uvs/J2059-0238_X_uvs.fits
wwins  /scr/pima/bm252a_uvs/J2059-0238_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bm252a_uvs/J2059-0238_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0291145 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000108029 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.11315 1.11315 2.2263 4.4526 8.90521 17.8104 35.6208 71.2417
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.029 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  269.505 
quit
! Quitting program
! Log file /scr/pima/bm252a_uvs/J2059-0238_X_dfm.log closed on Fri Jun 15 01:06:19 2018