! Started logfile: /scr/pima/bm252a_uvs/J0239-0234_X_dfm.log on Fri Jun 15 01:03:56 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.40599
obs     /scr/pima/bm252a_uvs/J0239-0234_X_uva.fits
! Reading UV FITS file: /scr/pima/bm252a_uvs/J0239-0234_X_uva.fits
! AN table 1: 533 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.91774 visibilities/baseline/integration-bin.
! Found source: J0239-0234
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09      1.6e+07          1      1.6e+07
!  02        2  8.47599e+09      1.6e+07          1      1.6e+07
!  03        3  8.79099e+09      1.6e+07          1      1.6e+07
!  04        4  8.89599e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 88048 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0239-0234_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 842 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 842 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 842 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 842 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.091778Jy  sigma=16.958876
! Fit after  self-cal, rms=0.531007Jy  sigma=8.210307
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6537 mas, bmaj=1.627 mas, bpa=-3.013 degrees
! Estimated noise=0.28931 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.358694 Jy
! Component: 100  -  total flux cleaned = 0.437054 Jy
! Total flux subtracted in 100 components = 0.437054 Jy
! Clean residual min=-0.011643 max=0.022169 Jy/beam
! Clean residual mean=0.000005 rms=0.001062 Jy/beam
! Combined flux in latest and established models = 0.437054 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.437054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077254Jy  sigma=1.159664
! Fit after  self-cal, rms=0.077232Jy  sigma=1.158980
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0235674 Jy
! Component: 100  -  total flux cleaned = 0.0365181 Jy
! Total flux subtracted in 100 components = 0.0365181 Jy
! Clean residual min=-0.007691 max=0.014826 Jy/beam
! Clean residual mean=0.000002 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.473572 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.473572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066422Jy  sigma=0.979402
! Fit after  self-cal, rms=0.066324Jy  sigma=0.978181
! Inverting map 
! Added new window around map position (0.4, -3.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134677 Jy
! Component: 100  -  total flux cleaned = 0.0207645 Jy
! Total flux subtracted in 100 components = 0.0207645 Jy
! Clean residual min=-0.005654 max=0.008779 Jy/beam
! Clean residual mean=0.000001 rms=0.000759 Jy/beam
! Combined flux in latest and established models = 0.494337 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 18 components and 0.494337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063183Jy  sigma=0.928057
! Fit after  self-cal, rms=0.062948Jy  sigma=0.925133
! Inverting map 
! Added new window around map position (0.8, -9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00779258 Jy
! Component: 100  -  total flux cleaned = 0.0132386 Jy
! Total flux subtracted in 100 components = 0.0132386 Jy
! Clean residual min=-0.005320 max=0.006837 Jy/beam
! Clean residual mean=0.000001 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.507575 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 0.507575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061982Jy  sigma=0.910847
! Fit after  self-cal, rms=0.061934Jy  sigma=0.910325
! Inverting map 
! Added new window around map position (-0.8, 9.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00599332 Jy
! Component: 100  -  total flux cleaned = 0.0103673 Jy
! Total flux subtracted in 100 components = 0.0103673 Jy
! Clean residual min=-0.005559 max=0.005207 Jy/beam
! Clean residual mean=0.000000 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.517943 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 30 components and 0.517943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061439Jy  sigma=0.903681
! Fit after  self-cal, rms=0.061419Jy  sigma=0.903423
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8523 mas, bmaj=2.055 mas, bpa=-1.628 degrees
! Estimated noise=0.168367 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, 23.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00553036 Jy
! Component: 100  -  total flux cleaned = 0.00777968 Jy
! Component: 150  -  total flux cleaned = 0.00927321 Jy
! Component: 200  -  total flux cleaned = 0.0102791 Jy
! Total flux subtracted in 200 components = 0.0102791 Jy
! Clean residual min=-0.004307 max=0.003318 Jy/beam
! Clean residual mean=0.000001 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.528222 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 55 components and 0.528222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060806Jy  sigma=0.893648
! Fit after  self-cal, rms=0.060781Jy  sigma=0.893270
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8523 x 2.055 at -1.628 degrees (North through East)
! Clean map  min=-0.0042448  max=0.46948 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.98     KP        1.02     
!   LA        1.04     MK        1.01     NL        0.98     OV        1.00     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.98     KP        1.02     
!   LA        1.04     MK        1.00     NL        0.98     OV        0.99     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.98     KP        1.01     
!   LA        1.04     MK        0.99     NL        0.97     OV        0.99     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.97     KP        1.02     
!   LA        1.02     MK        1.00     NL        0.98     OV        0.98     
!   PT        1.01     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.060781Jy  sigma=0.893270
! Fit after  self-cal, rms=0.059204Jy  sigma=0.872982
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8513 mas, bmaj=2.053 mas, bpa=-1.733 degrees
! Estimated noise=0.167849 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000104557 Jy
! Component: 100  -  total flux cleaned = -0.000563873 Jy
! Component: 150  -  total flux cleaned = -0.00108611 Jy
! Component: 200  -  total flux cleaned = -0.00164794 Jy
! Total flux subtracted in 200 components = -0.00164794 Jy
! Clean residual min=-0.002395 max=0.001928 Jy/beam
! Clean residual mean=0.000001 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.526574 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 65 components and 0.526574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058914Jy  sigma=0.868416
! Fit after  self-cal, rms=0.058896Jy  sigma=0.868188
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058896Jy  sigma=0.868188
! Fit after  self-cal, rms=0.058689Jy  sigma=0.865521
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8505 mas, bmaj=2.052 mas, bpa=-1.745 degrees
! Estimated noise=0.167771 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000657722 Jy
! Component: 100  -  total flux cleaned = -0.00105935 Jy
! Component: 150  -  total flux cleaned = -0.00139151 Jy
! Component: 200  -  total flux cleaned = -0.00196643 Jy
! Total flux subtracted in 200 components = -0.00196643 Jy
! Clean residual min=-0.001903 max=0.001441 Jy/beam
! Clean residual mean=0.000000 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.524607 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 78 components and 0.524607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058587Jy  sigma=0.863949
! Fit after  self-cal, rms=0.058581Jy  sigma=0.863891
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.52008e-05 Jy
! Component: 100  -  total flux cleaned = -0.00042461 Jy
! Component: 150  -  total flux cleaned = -0.00073485 Jy
! Component: 200  -  total flux cleaned = -0.000998002 Jy
! Total flux subtracted in 200 components = -0.000998002 Jy
! Clean residual min=-0.001875 max=0.001325 Jy/beam
! Clean residual mean=0.000000 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.523609 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 84 components and 0.523609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058561Jy  sigma=0.863537
! Fit after  self-cal, rms=0.058559Jy  sigma=0.863517
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058559Jy  sigma=0.863517
! Fit after  self-cal, rms=0.058130Jy  sigma=0.854501
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.85 mas, bmaj=2.051 mas, bpa=-1.746 degrees
! Estimated noise=0.167738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00074312 Jy
! Component: 100  -  total flux cleaned = -0.00107972 Jy
! Component: 150  -  total flux cleaned = -0.00129397 Jy
! Component: 200  -  total flux cleaned = -0.00136236 Jy
! Total flux subtracted in 200 components = -0.00136236 Jy
! Clean residual min=-0.001358 max=0.001101 Jy/beam
! Clean residual mean=0.000000 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.522247 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 85 components and 0.522247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058091Jy  sigma=0.853917
! Fit after  self-cal, rms=0.058090Jy  sigma=0.853891
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.91163e-05 Jy
! Component: 100  -  total flux cleaned = -5.53212e-05 Jy
! Component: 150  -  total flux cleaned = -0.00011327 Jy
! Component: 200  -  total flux cleaned = -0.000203654 Jy
! Total flux subtracted in 200 components = -0.000203654 Jy
! Clean residual min=-0.001334 max=0.001053 Jy/beam
! Clean residual mean=0.000000 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.522043 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 0.522043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058078Jy  sigma=0.853689
! Fit after  self-cal, rms=0.058076Jy  sigma=0.853676
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058076Jy  sigma=0.853676
! Fit after  self-cal, rms=0.057998Jy  sigma=0.852342
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.09 mas, bmaj=3.451 mas, bpa=-0.7936 degrees
! Estimated noise=0.217789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113322 Jy
! Component: 100  -  total flux cleaned = -0.000572746 Jy
! Component: 150  -  total flux cleaned = -0.000978202 Jy
! Component: 200  -  total flux cleaned = -0.00130904 Jy
! Total flux subtracted in 200 components = -0.00130904 Jy
! Clean residual min=-0.001436 max=0.001492 Jy/beam
! Clean residual mean=0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.520734 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 102 components and 0.520734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057989Jy  sigma=0.852182
! Fit after  self-cal, rms=0.057988Jy  sigma=0.852165
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.2, -9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135717 Jy
! Component: 100  -  total flux cleaned = 0.00199339 Jy
! Component: 150  -  total flux cleaned = 0.00220612 Jy
! Component: 200  -  total flux cleaned = 0.00239822 Jy
! Total flux subtracted in 200 components = 0.00239822 Jy
! Clean residual min=-0.001163 max=0.001031 Jy/beam
! Clean residual mean=0.000001 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.523132 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 132 components and 0.523133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057969Jy  sigma=0.851851
! Fit after  self-cal, rms=0.057967Jy  sigma=0.851824
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8498 mas, bmaj=2.051 mas, bpa=-1.752 degrees
! Estimated noise=0.167719 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8498 x 2.051 at -1.752 degrees (North through East)
! Clean map  min=-0.0011606  max=0.46831 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6534 mas, bmaj=1.628 mas, bpa=-3.064 degrees
! Estimated noise=0.288842 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.357976 Jy
! Component: 100  -  total flux cleaned = 0.436697 Jy
! Component: 150  -  total flux cleaned = 0.461696 Jy
! Component: 200  -  total flux cleaned = 0.476949 Jy
! Total flux subtracted in 200 components = 0.476949 Jy
! Clean residual min=-0.005336 max=0.008173 Jy/beam
! Clean residual mean=0.000002 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.476949 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.476949 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8498 mas, bmaj=2.051 mas, bpa=-1.752 degrees
! Estimated noise=0.167719 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160652 Jy
! Component: 100  -  total flux cleaned = 0.0251972 Jy
! Component: 150  -  total flux cleaned = 0.0307207 Jy
! Component: 200  -  total flux cleaned = 0.0342861 Jy
! Total flux subtracted in 200 components = 0.0342861 Jy
! Clean residual min=-0.001211 max=0.001951 Jy/beam
! Clean residual mean=0.000000 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.511235 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 24 components and 0.511235 Jy
! Inverting map 
! Added new window around map position (1, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237975 Jy
! Component: 100  -  total flux cleaned = 0.00404979 Jy
! Component: 150  -  total flux cleaned = 0.00535008 Jy
! Component: 200  -  total flux cleaned = 0.00641327 Jy
! Total flux subtracted in 200 components = 0.00641327 Jy
! Clean residual min=-0.000969 max=0.000819 Jy/beam
! Clean residual mean=0.000000 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.517648 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 50 components and 0.517648 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.09 mas, bmaj=3.451 mas, bpa=-0.7936 degrees
! Estimated noise=0.217789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123505 Jy
! Component: 100  -  total flux cleaned = 0.00189129 Jy
! Component: 150  -  total flux cleaned = 0.00216694 Jy
! Component: 200  -  total flux cleaned = 0.00227424 Jy
! Total flux subtracted in 200 components = 0.00227424 Jy
! Clean residual min=-0.001210 max=0.000985 Jy/beam
! Clean residual mean=0.000001 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.519922 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144446 Jy
! Component: 100  -  total flux cleaned = 0.000229675 Jy
! Component: 150  -  total flux cleaned = 0.000327096 Jy
! Component: 200  -  total flux cleaned = 0.000469585 Jy
! Total flux subtracted in 200 components = 0.000469585 Jy
! Clean residual min=-0.001086 max=0.000953 Jy/beam
! Clean residual mean=0.000001 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.520392 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 104 components and 0.520392 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8498 mas, bmaj=2.051 mas, bpa=-1.752 degrees
! Estimated noise=0.167719 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000498215 Jy
! Component: 100  -  total flux cleaned = 0.000791335 Jy
! Component: 150  -  total flux cleaned = 0.00100711 Jy
! Component: 200  -  total flux cleaned = 0.00116382 Jy
! Total flux subtracted in 200 components = 0.00116382 Jy
! Clean residual min=-0.000727 max=0.000764 Jy/beam
! Clean residual mean=0.000000 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.521556 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 128 components and 0.521556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057945Jy  sigma=0.851451
! Fit after  self-cal, rms=0.057939Jy  sigma=0.851368
wmodel J0239-0234_X_map.mod
! Writing 128 model components to file: J0239-0234_X_map.mod
wobs   J0239-0234_X_uvs.fits
! Writing UV FITS file: J0239-0234_X_uvs.fits
wwins  J0239-0234_X_map.win
! wwins: Wrote 7 windows to J0239-0234_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 7.16109e-06 Jy
! Component: 100  -  total flux cleaned = -7.86588e-05 Jy
! Component: 150  -  total flux cleaned = -0.000137387 Jy
! Component: 200  -  total flux cleaned = -0.000228834 Jy
! Component: 250  -  total flux cleaned = -0.000329003 Jy
! Component: 300  -  total flux cleaned = -0.000393899 Jy
! Component: 350  -  total flux cleaned = -0.000404528 Jy
! Component: 400  -  total flux cleaned = -0.00038369 Jy
! Component: 450  -  total flux cleaned = -0.000363132 Jy
! Component: 500  -  total flux cleaned = -0.00034309 Jy
! Component: 550  -  total flux cleaned = -0.000353044 Jy
! Component: 600  -  total flux cleaned = -0.0003529 Jy
! Component: 650  -  total flux cleaned = -0.000352918 Jy
! Component: 700  -  total flux cleaned = -0.000324539 Jy
! Component: 750  -  total flux cleaned = -0.000333923 Jy
! Component: 800  -  total flux cleaned = -0.000333781 Jy
! Component: 850  -  total flux cleaned = -0.000287794 Jy
! Component: 900  -  total flux cleaned = -0.000251221 Jy
! Component: 950  -  total flux cleaned = -0.000215132 Jy
! Component: 1000  -  total flux cleaned = -0.000206239 Jy
! Component: 1050  -  total flux cleaned = -0.00020631 Jy
! Component: 1100  -  total flux cleaned = -0.000188652 Jy
! Component: 1150  -  total flux cleaned = -0.000214925 Jy
! Component: 1200  -  total flux cleaned = -0.000197437 Jy
! Component: 1250  -  total flux cleaned = -0.000197378 Jy
! Component: 1300  -  total flux cleaned = -0.00018878 Jy
! Component: 1350  -  total flux cleaned = -0.000197344 Jy
! Component: 1400  -  total flux cleaned = -0.000163584 Jy
! Component: 1450  -  total flux cleaned = -0.00018058 Jy
! Component: 1500  -  total flux cleaned = -0.00019735 Jy
! Component: 1550  -  total flux cleaned = -0.000197322 Jy
! Component: 1600  -  total flux cleaned = -0.00020566 Jy
! Component: 1650  -  total flux cleaned = -0.000205679 Jy
! Component: 1700  -  total flux cleaned = -0.000197538 Jy
! Component: 1750  -  total flux cleaned = -0.000222006 Jy
! Component: 1800  -  total flux cleaned = -0.000246283 Jy
! Component: 1850  -  total flux cleaned = -0.000222155 Jy
! Component: 1900  -  total flux cleaned = -0.000230163 Jy
! Component: 1950  -  total flux cleaned = -0.000238039 Jy
! Component: 2000  -  total flux cleaned = -0.000230105 Jy
! Component: 2050  -  total flux cleaned = -0.00023006 Jy
! Component: 2100  -  total flux cleaned = -0.000198521 Jy
! Component: 2150  -  total flux cleaned = -0.000167161 Jy
! Component: 2200  -  total flux cleaned = -0.000190552 Jy
! Component: 2250  -  total flux cleaned = -0.000167211 Jy
! Component: 2300  -  total flux cleaned = -0.000182656 Jy
! Component: 2350  -  total flux cleaned = -0.000167251 Jy
! Component: 2400  -  total flux cleaned = -0.000105802 Jy
! Component: 2450  -  total flux cleaned = -0.000113495 Jy
! Component: 2500  -  total flux cleaned = -0.000105921 Jy
! Component: 2550  -  total flux cleaned = -9.0734e-05 Jy
! Component: 2600  -  total flux cleaned = -9.07478e-05 Jy
! Component: 2650  -  total flux cleaned = -6.05915e-05 Jy
! Component: 2700  -  total flux cleaned = -0.000113128 Jy
! Component: 2750  -  total flux cleaned = -7.57308e-05 Jy
! Component: 2800  -  total flux cleaned = -3.84499e-05 Jy
! Component: 2850  -  total flux cleaned = -3.10086e-05 Jy
! Component: 2900  -  total flux cleaned = -8.8317e-06 Jy
! Component: 2950  -  total flux cleaned = -1.61976e-05 Jy
! Component: 3000  -  total flux cleaned = -1.46096e-06 Jy
! Component: 3050  -  total flux cleaned = 2.05136e-05 Jy
! Component: 3100  -  total flux cleaned = 7.15947e-05 Jy
! Component: 3150  -  total flux cleaned = 4.24787e-05 Jy
! Component: 3200  -  total flux cleaned = 8.60408e-05 Jy
! Component: 3250  -  total flux cleaned = 7.15804e-05 Jy
! Component: 3300  -  total flux cleaned = 0.000114822 Jy
! Component: 3350  -  total flux cleaned = 0.000129226 Jy
! Component: 3400  -  total flux cleaned = 0.000150724 Jy
! Component: 3450  -  total flux cleaned = 0.00015788 Jy
! Component: 3500  -  total flux cleaned = 0.000172153 Jy
! Component: 3550  -  total flux cleaned = 0.000214727 Jy
! Component: 3600  -  total flux cleaned = 0.000214696 Jy
! Component: 3650  -  total flux cleaned = 0.000221744 Jy
! Component: 3700  -  total flux cleaned = 0.000235816 Jy
! Component: 3750  -  total flux cleaned = 0.000256863 Jy
! Component: 3800  -  total flux cleaned = 0.000263886 Jy
! Component: 3850  -  total flux cleaned = 0.000249913 Jy
! Component: 3900  -  total flux cleaned = 0.000284709 Jy
! Component: 3950  -  total flux cleaned = 0.000284746 Jy
! Component: 4000  -  total flux cleaned = 0.000333188 Jy
! Component: 4050  -  total flux cleaned = 0.000312442 Jy
! Total flux subtracted in 4096 components = 0.000326183 Jy
! Clean residual min=-0.000354 max=0.000427 Jy/beam
! Clean residual mean=0.000000 rms=0.000122 Jy/beam
! Combined flux in latest and established models = 0.521882 Jy
keep
! Adding 348 model components to the UV plane model.
! The established model now contains 475 components and 0.521882 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bm252a_uvs/J0239-0234_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8498 x 2.051 at -1.752 degrees (North through East)
! Clean map  min=-0.00063054  max=0.46949 Jy/beam
! Writing clean map to FITS file: /scr/pima/bm252a_uvs/J0239-0234_X_map.fits
wmodel /scr/pima/bm252a_uvs/J0239-0234_X_map.mod
! Writing 475 model components to file: /scr/pima/bm252a_uvs/J0239-0234_X_map.mod
wobs   /scr/pima/bm252a_uvs/J0239-0234_X_uvs.fits
! Writing UV FITS file: /scr/pima/bm252a_uvs/J0239-0234_X_uvs.fits
wwins  /scr/pima/bm252a_uvs/J0239-0234_X_map.win
! wwins: Wrote 8 windows to /scr/pima/bm252a_uvs/J0239-0234_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.469489 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000121747 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0777952 0.0777952 0.15559 0.311181 0.622361 1.24472 2.48945 4.97889 9.95778 19.9156 39.8311 79.6623
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.469 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3856.28 
quit
! Quitting program
! Log file /scr/pima/bm252a_uvs/J0239-0234_X_dfm.log closed on Fri Jun 15 01:04:05 2018