! Started logfile: /scr/pima/bg219i_uvs/J2303+3853_X_dfm.log on Thu May 19 23:42:32 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2303+3853_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2303+3853_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.741667 visibilities/baseline/integration-bin.
! Found source: J2303+3853
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19224 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2303+3853_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006999Jy  sigma=23.065399
! Fit after  self-cal, rms=0.920212Jy  sigma=21.019044
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.784 mas, bmaj=1.333 mas, bpa=-21.08 degrees
! Estimated noise=0.514815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0607264 Jy
! Component: 100  -  total flux cleaned = 0.0762584 Jy
! Total flux subtracted in 100 components = 0.0762584 Jy
! Clean residual min=-0.004694 max=0.007737 Jy/beam
! Clean residual mean=0.000002 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.0762584 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0762584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067906Jy  sigma=1.402450
! Fit after  self-cal, rms=0.067585Jy  sigma=1.395410
! Inverting map 
! Added new window around map position (-1.4, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00832328 Jy
! Component: 100  -  total flux cleaned = 0.0136818 Jy
! Total flux subtracted in 100 components = 0.0136818 Jy
! Clean residual min=-0.004058 max=0.003852 Jy/beam
! Clean residual mean=0.000001 rms=0.000869 Jy/beam
! Combined flux in latest and established models = 0.0899403 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.0899402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066253Jy  sigma=1.354526
! Fit after  self-cal, rms=0.066219Jy  sigma=1.353182
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=1.643 mas, bpa=-19.27 degrees
! Estimated noise=0.231355 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00605757 Jy
! Component: 100  -  total flux cleaned = 0.00956422 Jy
! Component: 150  -  total flux cleaned = 0.0117019 Jy
! Component: 200  -  total flux cleaned = 0.0130656 Jy
! Total flux subtracted in 200 components = 0.0130656 Jy
! Clean residual min=-0.002103 max=0.003530 Jy/beam
! Clean residual mean=-0.000001 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.103006 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 28 components and 0.103006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065755Jy  sigma=1.336435
! Fit after  self-cal, rms=0.065742Jy  sigma=1.335428
! Inverting map 
! Added new window around map position (-5.4, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00309782 Jy
! Component: 100  -  total flux cleaned = 0.00445315 Jy
! Component: 150  -  total flux cleaned = 0.00519049 Jy
! Component: 200  -  total flux cleaned = 0.00578186 Jy
! Total flux subtracted in 200 components = 0.00578186 Jy
! Clean residual min=-0.001753 max=0.001776 Jy/beam
! Clean residual mean=-0.000001 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.108788 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 49 components and 0.108788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065589Jy  sigma=1.331357
! Fit after  self-cal, rms=0.065576Jy  sigma=1.330722
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.043 x 1.643 at -19.27 degrees (North through East)
! Clean map  min=-0.0016067  max=0.081913 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.06     HN        0.94     KP        1.00     
!   LA        0.96     MK        1.05     NL        1.00     OV        0.98     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.97     KP        1.01     
!   LA        0.98     MK        1.00     NL        1.00     OV        1.01     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.07     HN        1.00     KP        0.98     
!   LA        0.97     MK        1.05     NL        1.01     OV        0.95     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.09     HN        1.05     KP        1.03     
!   LA        0.97     MK        0.97     NL        0.99     OV        1.00     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.05     HN        0.99     KP        1.04     
!   LA        0.93     MK        1.00     NL        1.01     OV        0.96     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.02     KP        1.00     
!   LA        1.00     MK        0.96     NL        1.01     OV        0.96     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.11     HN        1.08     KP        1.00     
!   LA        0.98     MK        0.95     NL        1.02     OV        0.97     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.98     KP        1.01     
!   LA        0.99     MK        0.99     NL        0.96     OV        0.95     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.10     HN        0.97     KP        1.03     
!   LA        1.00     MK        0.97     NL        0.98     OV        1.04     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.09     HN        0.95     KP        1.06     
!   LA        1.00     MK        0.93     NL        1.02     OV        1.01     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.10     HN        1.00     KP        0.99     
!   LA        0.98     MK        1.07     NL        0.97     OV        1.00     
!   PT        1.02     SC        1.08     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.00     KP        1.03     
!   LA        1.01     MK        1.08     NL        1.03     OV        1.00     
!   PT        0.91     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.065576Jy  sigma=1.330722
! Fit after  self-cal, rms=0.066928Jy  sigma=1.327146
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=1.646 mas, bpa=-19.4 degrees
! Estimated noise=0.231027 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000720939 Jy
! Component: 100  -  total flux cleaned = 0.000917655 Jy
! Component: 150  -  total flux cleaned = 0.00105332 Jy
! Component: 200  -  total flux cleaned = 0.00112011 Jy
! Total flux subtracted in 200 components = 0.00112011 Jy
! Clean residual min=-0.001558 max=0.001440 Jy/beam
! Clean residual mean=0.000000 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.109908 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 61 components and 0.109908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066894Jy  sigma=1.326391
! Fit after  self-cal, rms=0.066949Jy  sigma=1.326178
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066949Jy  sigma=1.326178
! Fit after  self-cal, rms=0.068378Jy  sigma=1.323647
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.041 mas, bmaj=1.649 mas, bpa=-19.3 degrees
! Estimated noise=0.231631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000233936 Jy
! Component: 100  -  total flux cleaned = 0.000370104 Jy
! Component: 150  -  total flux cleaned = 0.00042052 Jy
! Component: 200  -  total flux cleaned = 0.000436164 Jy
! Total flux subtracted in 200 components = 0.000436164 Jy
! Clean residual min=-0.001327 max=0.001237 Jy/beam
! Clean residual mean=-0.000000 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.110344 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 74 components and 0.110344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068368Jy  sigma=1.323347
! Fit after  self-cal, rms=0.068394Jy  sigma=1.323245
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.28355e-05 Jy
! Component: 100  -  total flux cleaned = 4.81895e-05 Jy
! Component: 150  -  total flux cleaned = 6.17947e-05 Jy
! Component: 200  -  total flux cleaned = 6.19037e-05 Jy
! Total flux subtracted in 200 components = 6.19037e-05 Jy
! Clean residual min=-0.001325 max=0.001202 Jy/beam
! Clean residual mean=-0.000000 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.110406 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 80 components and 0.110406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068389Jy  sigma=1.323094
! Fit after  self-cal, rms=0.068390Jy  sigma=1.323084
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068390Jy  sigma=1.323084
! Fit after  self-cal, rms=0.068420Jy  sigma=1.323063
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=1.649 mas, bpa=-19.28 degrees
! Estimated noise=0.231617 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000210267 Jy
! Component: 100  -  total flux cleaned = 0.000249018 Jy
! Component: 150  -  total flux cleaned = 0.000260974 Jy
! Component: 200  -  total flux cleaned = 0.000260949 Jy
! Total flux subtracted in 200 components = 0.000260949 Jy
! Clean residual min=-0.001313 max=0.001158 Jy/beam
! Clean residual mean=-0.000000 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.110667 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 86 components and 0.110667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068416Jy  sigma=1.322944
! Fit after  self-cal, rms=0.068417Jy  sigma=1.322931
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.51197e-05 Jy
! Component: 100  -  total flux cleaned = 1.51347e-05 Jy
! Component: 150  -  total flux cleaned = 1.51228e-05 Jy
! Component: 200  -  total flux cleaned = 1.53286e-05 Jy
! Total flux subtracted in 200 components = 1.53286e-05 Jy
! Clean residual min=-0.001311 max=0.001133 Jy/beam
! Clean residual mean=-0.000000 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.110682 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 88 components and 0.110682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068414Jy  sigma=1.322852
! Fit after  self-cal, rms=0.068415Jy  sigma=1.322846
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068415Jy  sigma=1.322846
! Fit after  self-cal, rms=0.068403Jy  sigma=1.322842
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.075 mas, bmaj=2.494 mas, bpa=-5.922 degrees
! Estimated noise=0.287523 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.43012e-05 Jy
! Component: 100  -  total flux cleaned = 6.51756e-05 Jy
! Component: 150  -  total flux cleaned = 6.58362e-05 Jy
! Component: 200  -  total flux cleaned = 5.68091e-05 Jy
! Total flux subtracted in 200 components = 5.68091e-05 Jy
! Clean residual min=-0.001541 max=0.001210 Jy/beam
! Clean residual mean=-0.000000 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.110739 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 112 components and 0.110739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068401Jy  sigma=1.322809
! Fit after  self-cal, rms=0.068401Jy  sigma=1.322797
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.56013e-05 Jy
! Component: 100  -  total flux cleaned = 3.3345e-05 Jy
! Component: 150  -  total flux cleaned = 2.54034e-05 Jy
! Component: 200  -  total flux cleaned = 1.80099e-05 Jy
! Total flux subtracted in 200 components = 1.80099e-05 Jy
! Clean residual min=-0.001535 max=0.001205 Jy/beam
! Clean residual mean=-0.000000 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.110757 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 116 components and 0.110757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068399Jy  sigma=1.322786
! Fit after  self-cal, rms=0.068400Jy  sigma=1.322772
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=1.649 mas, bpa=-19.27 degrees
! Estimated noise=0.231581 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.04 x 1.649 at -19.27 degrees (North through East)
! Clean map  min=-0.0013455  max=0.081611 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7808 mas, bmaj=1.336 mas, bpa=-21.08 degrees
! Estimated noise=0.516033 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0606817 Jy
! Component: 100  -  total flux cleaned = 0.0769981 Jy
! Component: 150  -  total flux cleaned = 0.0860742 Jy
! Component: 200  -  total flux cleaned = 0.0922615 Jy
! Total flux subtracted in 200 components = 0.0922615 Jy
! Clean residual min=-0.003822 max=0.003553 Jy/beam
! Clean residual mean=0.000002 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.0922615 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0922615 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=1.649 mas, bpa=-19.27 degrees
! Estimated noise=0.231581 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00627017 Jy
! Component: 100  -  total flux cleaned = 0.0101122 Jy
! Component: 150  -  total flux cleaned = 0.012712 Jy
! Component: 200  -  total flux cleaned = 0.0144283 Jy
! Total flux subtracted in 200 components = 0.0144283 Jy
! Clean residual min=-0.001723 max=0.001348 Jy/beam
! Clean residual mean=-0.000000 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.10669 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 39 components and 0.10669 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.075 mas, bmaj=2.494 mas, bpa=-5.922 degrees
! Estimated noise=0.287523 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00178549 Jy
! Component: 100  -  total flux cleaned = 0.00252404 Jy
! Component: 150  -  total flux cleaned = 0.00295537 Jy
! Component: 200  -  total flux cleaned = 0.00328088 Jy
! Total flux subtracted in 200 components = 0.00328088 Jy
! Clean residual min=-0.001577 max=0.001245 Jy/beam
! Clean residual mean=-0.000000 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.109971 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251265 Jy
! Component: 100  -  total flux cleaned = 0.000421649 Jy
! Component: 150  -  total flux cleaned = 0.00053738 Jy
! Component: 200  -  total flux cleaned = 0.000624823 Jy
! Total flux subtracted in 200 components = 0.000624823 Jy
! Clean residual min=-0.001552 max=0.001226 Jy/beam
! Clean residual mean=-0.000000 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.110595 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 77 components and 0.110595 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=1.649 mas, bpa=-19.27 degrees
! Estimated noise=0.231581 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.36122e-05 Jy
! Component: 100  -  total flux cleaned = 7.69488e-05 Jy
! Component: 150  -  total flux cleaned = 0.000114743 Jy
! Component: 200  -  total flux cleaned = 0.000188179 Jy
! Total flux subtracted in 200 components = 0.000188179 Jy
! Clean residual min=-0.001369 max=0.001217 Jy/beam
! Clean residual mean=0.000000 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.110784 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 95 components and 0.110784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068419Jy  sigma=1.323329
! Fit after  self-cal, rms=0.068414Jy  sigma=1.323193
wmodel /J2303+3853_X_map.mod
! wmodel: Unable to open new model file: /J2303+3853_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2303+3853_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.04 x 1.649 at -19.27 degrees (North through East)
! Clean map  min=-0.0012866  max=0.081462 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2303+3853_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0814622 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000287815 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.05993 1.05993 2.11986 4.23973 8.47946 16.9589 33.9178 67.8357
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.081 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  283.036 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2303+3853_X_dfm.log closed on Thu May 19 23:42:35 2016