! Started logfile: /scr/pima/bg219i_uvs/J2301+3726_X_dfm.log on Thu May 19 23:42:23 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2301+3726_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2301+3726_X_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.837825 visibilities/baseline/integration-bin.
! Found source: J2301+3726
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21264 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2301+3726_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.060336Jy  sigma=23.359210
! Fit after  self-cal, rms=0.657535Jy  sigma=14.419623
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7843 mas, bmaj=1.104 mas, bpa=-9.28 degrees
! Estimated noise=0.473652 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.249822 Jy
! Component: 100  -  total flux cleaned = 0.33979 Jy
! Total flux subtracted in 100 components = 0.33979 Jy
! Clean residual min=-0.016500 max=0.040654 Jy/beam
! Clean residual mean=0.000005 rms=0.003885 Jy/beam
! Combined flux in latest and established models = 0.33979 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.33979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.114808Jy  sigma=2.479502
! Fit after  self-cal, rms=0.114242Jy  sigma=2.469951
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.044889 Jy
! Component: 100  -  total flux cleaned = 0.0674537 Jy
! Total flux subtracted in 100 components = 0.0674537 Jy
! Clean residual min=-0.010130 max=0.015667 Jy/beam
! Clean residual mean=-0.000000 rms=0.002205 Jy/beam
! Combined flux in latest and established models = 0.407243 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.407243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090571Jy  sigma=1.871971
! Fit after  self-cal, rms=0.090420Jy  sigma=1.869893
! Inverting map 
! Added new window around map position (0.6, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165265 Jy
! Component: 100  -  total flux cleaned = 0.0281064 Jy
! Total flux subtracted in 100 components = 0.0281064 Jy
! Clean residual min=-0.008446 max=0.011898 Jy/beam
! Clean residual mean=-0.000002 rms=0.001860 Jy/beam
! Combined flux in latest and established models = 0.43535 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 22 components and 0.43535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084851Jy  sigma=1.731118
! Fit after  self-cal, rms=0.084771Jy  sigma=1.728111
! Inverting map 
! Added new window around map position (0.8, -4.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114498 Jy
! Component: 100  -  total flux cleaned = 0.0196048 Jy
! Total flux subtracted in 100 components = 0.0196048 Jy
! Clean residual min=-0.006973 max=0.009458 Jy/beam
! Clean residual mean=-0.000002 rms=0.001651 Jy/beam
! Combined flux in latest and established models = 0.454954 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 33 components and 0.454954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082085Jy  sigma=1.653928
! Fit after  self-cal, rms=0.081986Jy  sigma=1.651449
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.009 mas, bmaj=1.382 mas, bpa=-7.841 degrees
! Estimated noise=0.228411 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153393 Jy
! Component: 100  -  total flux cleaned = 0.0259351 Jy
! Component: 150  -  total flux cleaned = 0.0340817 Jy
! Component: 200  -  total flux cleaned = 0.0404995 Jy
! Total flux subtracted in 200 components = 0.0404995 Jy
! Clean residual min=-0.008230 max=0.013002 Jy/beam
! Clean residual mean=-0.000019 rms=0.002337 Jy/beam
! Combined flux in latest and established models = 0.495454 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 47 components and 0.495454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078504Jy  sigma=1.553619
! Fit after  self-cal, rms=0.078371Jy  sigma=1.549206
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.009 x 1.382 at -7.841 degrees (North through East)
! Clean map  min=-0.0074032  max=0.34179 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.10     HN        1.04     KP        0.97     
!   LA        0.95     MK        1.02     NL        1.00     OV        0.98     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.09     HN        1.03     KP        0.95     
!   LA        0.96     MK        1.01     NL        1.00     OV        0.96     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.11     HN        1.02     KP        0.98     
!   LA        0.94     MK        1.02     NL        1.00     OV        0.96     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.09     HN        1.03     KP        0.98     
!   LA        0.94     MK        1.01     NL        0.99     OV        0.96     
!   PT        0.92     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.09     HN        1.03     KP        0.98     
!   LA        0.94     MK        0.99     NL        1.01     OV        0.97     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.10     HN        1.02     KP        0.98     
!   LA        0.95     MK        1.02     NL        1.00     OV        0.94     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.12     HN        1.01     KP        0.97     
!   LA        0.95     MK        1.01     NL        1.00     OV        0.97     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.11     HN        1.01     KP        0.98     
!   LA        0.96     MK        1.01     NL        0.99     OV        0.95     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.13     HN        1.02     KP        0.97     
!   LA        0.96     MK        1.00     NL        1.00     OV        0.96     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.14     HN        1.01     KP        0.98     
!   LA        0.97     MK        1.02     NL        1.00     OV        0.94     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.13     HN        1.03     KP        0.98     
!   LA        0.96     MK        0.99     NL        1.00     OV        0.98     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.13     HN        1.01     KP        0.99     
!   LA        0.95     MK        1.00     NL        1.01     OV        0.96     
!   PT        0.93     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.078371Jy  sigma=1.549206
! Fit after  self-cal, rms=0.076373Jy  sigma=1.468291
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=1.393 mas, bpa=-8.201 degrees
! Estimated noise=0.227127 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.2, -19.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00947427 Jy
! Component: 100  -  total flux cleaned = 0.0130533 Jy
! Component: 150  -  total flux cleaned = 0.0147616 Jy
! Component: 200  -  total flux cleaned = 0.0160336 Jy
! Total flux subtracted in 200 components = 0.0160336 Jy
! Clean residual min=-0.005245 max=0.007018 Jy/beam
! Clean residual mean=-0.000003 rms=0.001345 Jy/beam
! Combined flux in latest and established models = 0.511487 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 78 components and 0.511487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074996Jy  sigma=1.438047
! Fit after  self-cal, rms=0.075016Jy  sigma=1.436570
! Inverting map 
! Added new window around map position (9, -35).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00699187 Jy
! Component: 100  -  total flux cleaned = 0.0101758 Jy
! Component: 150  -  total flux cleaned = 0.0109854 Jy
! Component: 200  -  total flux cleaned = 0.0116872 Jy
! Total flux subtracted in 200 components = 0.0116872 Jy
! Clean residual min=-0.004569 max=0.006372 Jy/beam
! Clean residual mean=-0.000004 rms=0.001156 Jy/beam
! Combined flux in latest and established models = 0.523175 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 106 components and 0.523175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074077Jy  sigma=1.420135
! Fit after  self-cal, rms=0.074037Jy  sigma=1.418093
! Inverting map 
! Added new window around map position (1.4, 5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00572558 Jy
! Component: 100  -  total flux cleaned = 0.00916503 Jy
! Component: 150  -  total flux cleaned = 0.0107043 Jy
! Component: 200  -  total flux cleaned = 0.0113863 Jy
! Total flux subtracted in 200 components = 0.0113863 Jy
! Clean residual min=-0.004563 max=0.004818 Jy/beam
! Clean residual mean=-0.000003 rms=0.001012 Jy/beam
! Combined flux in latest and established models = 0.534561 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 131 components and 0.534561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073437Jy  sigma=1.405900
! Fit after  self-cal, rms=0.073431Jy  sigma=1.405396
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073431Jy  sigma=1.405396
! Fit after  self-cal, rms=0.073782Jy  sigma=1.388791
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.39 mas, bpa=-7.774 degrees
! Estimated noise=0.22691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00295373 Jy
! Component: 100  -  total flux cleaned = 0.00507862 Jy
! Component: 150  -  total flux cleaned = 0.00624894 Jy
! Component: 200  -  total flux cleaned = 0.00684419 Jy
! Total flux subtracted in 200 components = 0.00684419 Jy
! Clean residual min=-0.003351 max=0.004757 Jy/beam
! Clean residual mean=-0.000003 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.541405 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 143 components and 0.541405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073590Jy  sigma=1.384994
! Fit after  self-cal, rms=0.073608Jy  sigma=1.384760
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00414624 Jy
! Component: 100  -  total flux cleaned = 0.0046275 Jy
! Component: 150  -  total flux cleaned = 0.00469986 Jy
! Component: 200  -  total flux cleaned = 0.00476128 Jy
! Total flux subtracted in 200 components = 0.00476128 Jy
! Clean residual min=-0.003248 max=0.003692 Jy/beam
! Clean residual mean=-0.000002 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.546166 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 159 components and 0.546166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073314Jy  sigma=1.378626
! Fit after  self-cal, rms=0.073271Jy  sigma=1.377765
! Inverting map 
! Added new window around map position (-6.4, 43.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027282 Jy
! Component: 100  -  total flux cleaned = 0.00363044 Jy
! Component: 150  -  total flux cleaned = 0.0042307 Jy
! Component: 200  -  total flux cleaned = 0.0044458 Jy
! Total flux subtracted in 200 components = 0.0044458 Jy
! Clean residual min=-0.003078 max=0.003155 Jy/beam
! Clean residual mean=-0.000000 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.550612 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 182 components and 0.550612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073094Jy  sigma=1.373649
! Fit after  self-cal, rms=0.073081Jy  sigma=1.373400
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073081Jy  sigma=1.373400
! Fit after  self-cal, rms=0.072819Jy  sigma=1.372503
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.387 mas, bpa=-7.671 degrees
! Estimated noise=0.226568 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00160327 Jy
! Component: 100  -  total flux cleaned = 0.00227231 Jy
! Component: 150  -  total flux cleaned = 0.00261833 Jy
! Component: 200  -  total flux cleaned = 0.00279883 Jy
! Total flux subtracted in 200 components = 0.00279883 Jy
! Clean residual min=-0.002707 max=0.002810 Jy/beam
! Clean residual mean=-0.000001 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.553411 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 197 components and 0.553411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072733Jy  sigma=1.370619
! Fit after  self-cal, rms=0.072723Jy  sigma=1.370427
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00028107 Jy
! Component: 100  -  total flux cleaned = 0.000328087 Jy
! Component: 150  -  total flux cleaned = 0.00032923 Jy
! Component: 200  -  total flux cleaned = 0.000408091 Jy
! Total flux subtracted in 200 components = 0.000408091 Jy
! Clean residual min=-0.002640 max=0.002627 Jy/beam
! Clean residual mean=-0.000001 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.553819 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 209 components and 0.553819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072668Jy  sigma=1.369362
! Fit after  self-cal, rms=0.072667Jy  sigma=1.369266
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072667Jy  sigma=1.369266
! Fit after  self-cal, rms=0.072564Jy  sigma=1.369030
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.063 mas, bmaj=2.425 mas, bpa=-3.665 degrees
! Estimated noise=0.292439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166402 Jy
! Component: 100  -  total flux cleaned = 0.00160993 Jy
! Component: 150  -  total flux cleaned = 0.00150023 Jy
! Component: 200  -  total flux cleaned = 0.00135688 Jy
! Total flux subtracted in 200 components = 0.00135688 Jy
! Clean residual min=-0.003098 max=0.003058 Jy/beam
! Clean residual mean=-0.000001 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.555176 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 222 components and 0.555176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072522Jy  sigma=1.368273
! Fit after  self-cal, rms=0.072512Jy  sigma=1.368050
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000312462 Jy
! Component: 100  -  total flux cleaned = 0.000263863 Jy
! Component: 150  -  total flux cleaned = 0.000262973 Jy
! Component: 200  -  total flux cleaned = 0.000223346 Jy
! Total flux subtracted in 200 components = 0.000223346 Jy
! Clean residual min=-0.002975 max=0.002913 Jy/beam
! Clean residual mean=-0.000001 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.5554 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 231 components and 0.5554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072489Jy  sigma=1.367787
! Fit after  self-cal, rms=0.072485Jy  sigma=1.367663
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=1.386 mas, bpa=-7.599 degrees
! Estimated noise=0.226507 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.013 x 1.386 at -7.599 degrees (North through East)
! Clean map  min=-0.0025594  max=0.33899 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7877 mas, bmaj=1.105 mas, bpa=-8.713 degrees
! Estimated noise=0.471178 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.248555 Jy
! Component: 100  -  total flux cleaned = 0.33831 Jy
! Component: 150  -  total flux cleaned = 0.382123 Jy
! Component: 200  -  total flux cleaned = 0.405644 Jy
! Total flux subtracted in 200 components = 0.405644 Jy
! Clean residual min=-0.008211 max=0.012740 Jy/beam
! Clean residual mean=0.000001 rms=0.002001 Jy/beam
! Combined flux in latest and established models = 0.405644 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.405644 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=1.386 mas, bpa=-7.599 degrees
! Estimated noise=0.226507 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0270324 Jy
! Component: 100  -  total flux cleaned = 0.0458166 Jy
! Component: 150  -  total flux cleaned = 0.0596911 Jy
! Component: 200  -  total flux cleaned = 0.0707454 Jy
! Total flux subtracted in 200 components = 0.0707454 Jy
! Clean residual min=-0.006176 max=0.008511 Jy/beam
! Clean residual mean=-0.000011 rms=0.001576 Jy/beam
! Combined flux in latest and established models = 0.47639 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 56 components and 0.47639 Jy
! Inverting map 
! Added new window around map position (-0.8, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00971053 Jy
! Component: 100  -  total flux cleaned = 0.0176237 Jy
! Component: 150  -  total flux cleaned = 0.0244338 Jy
! Component: 200  -  total flux cleaned = 0.0303677 Jy
! Total flux subtracted in 200 components = 0.0303677 Jy
! Clean residual min=-0.004508 max=0.005186 Jy/beam
! Clean residual mean=-0.000007 rms=0.001001 Jy/beam
! Combined flux in latest and established models = 0.506757 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 96 components and 0.506757 Jy
! Inverting map 
! Added new window around map position (-3.8, 5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00561316 Jy
! Component: 100  -  total flux cleaned = 0.0103092 Jy
! Component: 150  -  total flux cleaned = 0.0144501 Jy
! Component: 200  -  total flux cleaned = 0.0181106 Jy
! Total flux subtracted in 200 components = 0.0181106 Jy
! Clean residual min=-0.003516 max=0.003487 Jy/beam
! Clean residual mean=-0.000004 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.524868 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 114 components and 0.524868 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.063 mas, bmaj=2.425 mas, bpa=-3.665 degrees
! Estimated noise=0.292439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0057801 Jy
! Component: 100  -  total flux cleaned = 0.0100535 Jy
! Component: 150  -  total flux cleaned = 0.0134294 Jy
! Component: 200  -  total flux cleaned = 0.0162271 Jy
! Total flux subtracted in 200 components = 0.0162271 Jy
! Clean residual min=-0.003450 max=0.002852 Jy/beam
! Clean residual mean=-0.000004 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 0.541095 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237117 Jy
! Component: 100  -  total flux cleaned = 0.00439382 Jy
! Component: 150  -  total flux cleaned = 0.00612974 Jy
! Component: 200  -  total flux cleaned = 0.00762241 Jy
! Total flux subtracted in 200 components = 0.00762241 Jy
! Clean residual min=-0.002871 max=0.002493 Jy/beam
! Clean residual mean=-0.000000 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.548717 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 177 components and 0.548717 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=1.386 mas, bpa=-7.599 degrees
! Estimated noise=0.226507 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000573073 Jy
! Component: 100  -  total flux cleaned = 0.00130626 Jy
! Component: 150  -  total flux cleaned = 0.00212771 Jy
! Component: 200  -  total flux cleaned = 0.002977 Jy
! Total flux subtracted in 200 components = 0.002977 Jy
! Clean residual min=-0.002328 max=0.002214 Jy/beam
! Clean residual mean=0.000000 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.551695 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 205 components and 0.551694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072386Jy  sigma=1.366053
! Fit after  self-cal, rms=0.072326Jy  sigma=1.364542
wmodel /J2301+3726_X_map.mod
! wmodel: Unable to open new model file: /J2301+3726_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2301+3726_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.013 x 1.386 at -7.599 degrees (North through East)
! Clean map  min=-0.001972  max=0.34041 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2301+3726_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.34041 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000442013 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.389541 0.389541 0.779082 1.55816 3.11633 6.23266 12.4653 24.9306 49.8613 99.7225
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.34 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  770.137 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2301+3726_X_dfm.log closed on Thu May 19 23:42:27 2016