! Started logfile: /scr/pima/bg219i_uvs/J2253+3236_X_dfm.log on Thu May 19 23:42:11 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2253+3236_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2253+3236_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.801084 visibilities/baseline/integration-bin.
! Found source: J2253+3236
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17736 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2253+3236_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016501Jy  sigma=22.791868
! Fit after  self-cal, rms=0.821567Jy  sigma=18.340589
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8025 mas, bmaj=1.169 mas, bpa=-6.052 degrees
! Estimated noise=0.497773 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.134192 Jy
! Component: 100  -  total flux cleaned = 0.165372 Jy
! Total flux subtracted in 100 components = 0.165372 Jy
! Clean residual min=-0.008235 max=0.025771 Jy/beam
! Clean residual mean=-0.000001 rms=0.002156 Jy/beam
! Combined flux in latest and established models = 0.165372 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.165372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082362Jy  sigma=1.732309
! Fit after  self-cal, rms=0.082341Jy  sigma=1.731681
! Inverting map 
! Added new window around map position (-1.4, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.022611 Jy
! Component: 100  -  total flux cleaned = 0.0351056 Jy
! Total flux subtracted in 100 components = 0.0351056 Jy
! Clean residual min=-0.006280 max=0.007343 Jy/beam
! Clean residual mean=-0.000000 rms=0.001349 Jy/beam
! Combined flux in latest and established models = 0.200477 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.200477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073056Jy  sigma=1.493010
! Fit after  self-cal, rms=0.072404Jy  sigma=1.477489
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105381 Jy
! Component: 100  -  total flux cleaned = 0.0172385 Jy
! Total flux subtracted in 100 components = 0.0172385 Jy
! Clean residual min=-0.004506 max=0.004332 Jy/beam
! Clean residual mean=-0.000000 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.217716 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 0.217716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070048Jy  sigma=1.411049
! Fit after  self-cal, rms=0.069922Jy  sigma=1.408169
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=1.485 mas, bpa=-9.161 degrees
! Estimated noise=0.24851 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00853476 Jy
! Component: 100  -  total flux cleaned = 0.0132018 Jy
! Component: 150  -  total flux cleaned = 0.0160774 Jy
! Component: 200  -  total flux cleaned = 0.0178871 Jy
! Total flux subtracted in 200 components = 0.0178871 Jy
! Clean residual min=-0.002919 max=0.004019 Jy/beam
! Clean residual mean=-0.000002 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.235603 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 32 components and 0.235603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069051Jy  sigma=1.378890
! Fit after  self-cal, rms=0.068984Jy  sigma=1.377281
! Inverting map 
! Added new window around map position (7.6, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00394552 Jy
! Component: 100  -  total flux cleaned = 0.00627342 Jy
! Component: 150  -  total flux cleaned = 0.00798374 Jy
! Component: 200  -  total flux cleaned = 0.00870358 Jy
! Total flux subtracted in 200 components = 0.00870358 Jy
! Clean residual min=-0.002523 max=0.002614 Jy/beam
! Clean residual mean=-0.000002 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.244306 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 55 components and 0.244306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068670Jy  sigma=1.371893
! Fit after  self-cal, rms=0.068657Jy  sigma=1.371379
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.015 x 1.485 at -9.161 degrees (North through East)
! Clean map  min=-0.0024391  max=0.17686 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        1.01     KP        1.00     
!   LA        1.00     MK        1.03     NL        1.02     OV        1.03     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        1.00     KP        0.97     
!   LA        1.00     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.99     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.01     OV        1.02     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        0.99     KP        0.99     
!   LA        0.98     MK        1.01     NL        1.00     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        0.99     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.01     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.01     KP        1.00     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.98     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.07     HN        0.96     KP        0.99     
!   LA        1.00     MK        0.98     NL        1.00     OV        0.99     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.99     KP        1.00     
!   LA        1.00     MK        1.00     NL        0.98     OV        1.00     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.11     HN        0.97     KP        0.99     
!   LA        0.99     MK        1.01     NL        0.99     OV        0.98     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.08     HN        1.00     KP        1.03     
!   LA        0.98     MK        0.99     NL        1.01     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.09     HN        0.99     KP        0.97     
!   LA        1.00     MK        1.00     NL        0.99     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        1.02     KP        0.99     
!   LA        0.98     MK        0.97     NL        1.03     OV        0.99     
!   PT        0.96     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.068657Jy  sigma=1.371379
! Fit after  self-cal, rms=0.068733Jy  sigma=1.364040
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=1.484 mas, bpa=-9.005 degrees
! Estimated noise=0.247896 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000540551 Jy
! Component: 100  -  total flux cleaned = -0.000748249 Jy
! Component: 150  -  total flux cleaned = -0.000820249 Jy
! Component: 200  -  total flux cleaned = -0.000725135 Jy
! Total flux subtracted in 200 components = -0.000725135 Jy
! Clean residual min=-0.002058 max=0.001926 Jy/beam
! Clean residual mean=0.000003 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.243581 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 68 components and 0.243581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068689Jy  sigma=1.363017
! Fit after  self-cal, rms=0.068703Jy  sigma=1.362912
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068703Jy  sigma=1.362912
! Fit after  self-cal, rms=0.069671Jy  sigma=1.356171
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=1.482 mas, bpa=-8.818 degrees
! Estimated noise=0.248168 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.94837e-05 Jy
! Component: 100  -  total flux cleaned = -0.000173176 Jy
! Component: 150  -  total flux cleaned = -0.000223304 Jy
! Component: 200  -  total flux cleaned = -0.000224701 Jy
! Total flux subtracted in 200 components = -0.000224701 Jy
! Clean residual min=-0.001556 max=0.001500 Jy/beam
! Clean residual mean=0.000001 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.243357 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 83 components and 0.243357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069649Jy  sigma=1.355595
! Fit after  self-cal, rms=0.069670Jy  sigma=1.355536
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.06609e-05 Jy
! Component: 100  -  total flux cleaned = 3.09459e-05 Jy
! Component: 150  -  total flux cleaned = 1.37753e-05 Jy
! Component: 200  -  total flux cleaned = -3.12942e-05 Jy
! Total flux subtracted in 200 components = -3.12942e-05 Jy
! Clean residual min=-0.001561 max=0.001456 Jy/beam
! Clean residual mean=0.000001 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.243325 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 87 components and 0.243325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069662Jy  sigma=1.355341
! Fit after  self-cal, rms=0.069661Jy  sigma=1.355329
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069661Jy  sigma=1.355329
! Fit after  self-cal, rms=0.069715Jy  sigma=1.355257
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.482 mas, bpa=-8.783 degrees
! Estimated noise=0.247941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000220944 Jy
! Component: 100  -  total flux cleaned = -0.000290959 Jy
! Component: 150  -  total flux cleaned = -0.000320332 Jy
! Component: 200  -  total flux cleaned = -0.000347642 Jy
! Total flux subtracted in 200 components = -0.000347642 Jy
! Clean residual min=-0.001510 max=0.001423 Jy/beam
! Clean residual mean=0.000001 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.242978 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 89 components and 0.242978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069708Jy  sigma=1.355070
! Fit after  self-cal, rms=0.069709Jy  sigma=1.355062
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.86147e-05 Jy
! Component: 100  -  total flux cleaned = -5.33456e-05 Jy
! Component: 150  -  total flux cleaned = -4.17771e-05 Jy
! Component: 200  -  total flux cleaned = -5.29178e-05 Jy
! Total flux subtracted in 200 components = -5.29178e-05 Jy
! Clean residual min=-0.001512 max=0.001394 Jy/beam
! Clean residual mean=0.000001 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.242925 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 94 components and 0.242925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069705Jy  sigma=1.354976
! Fit after  self-cal, rms=0.069704Jy  sigma=1.354972
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069704Jy  sigma=1.354972
! Fit after  self-cal, rms=0.069733Jy  sigma=1.354937
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.106 mas, bmaj=2.551 mas, bpa=-8.496 degrees
! Estimated noise=0.310938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168665 Jy
! Component: 100  -  total flux cleaned = 0.000209655 Jy
! Component: 150  -  total flux cleaned = 0.000189464 Jy
! Component: 200  -  total flux cleaned = 0.000189487 Jy
! Total flux subtracted in 200 components = 0.000189487 Jy
! Clean residual min=-0.001640 max=0.001745 Jy/beam
! Clean residual mean=0.000003 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.243114 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 101 components and 0.243114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069734Jy  sigma=1.354908
! Fit after  self-cal, rms=0.069734Jy  sigma=1.354891
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.74785e-06 Jy
! Component: 100  -  total flux cleaned = 5.42997e-06 Jy
! Component: 150  -  total flux cleaned = -1.76329e-06 Jy
! Component: 200  -  total flux cleaned = -8.13247e-06 Jy
! Total flux subtracted in 200 components = -8.13247e-06 Jy
! Clean residual min=-0.001625 max=0.001747 Jy/beam
! Clean residual mean=0.000003 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.243106 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 108 components and 0.243106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069735Jy  sigma=1.354903
! Fit after  self-cal, rms=0.069735Jy  sigma=1.354901
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=1.482 mas, bpa=-8.762 degrees
! Estimated noise=0.247754 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.013 x 1.482 at -8.762 degrees (North through East)
! Clean map  min=-0.0013279  max=0.17672 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8016 mas, bmaj=1.167 mas, bpa=-5.793 degrees
! Estimated noise=0.495272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.132842 Jy
! Component: 100  -  total flux cleaned = 0.170729 Jy
! Component: 150  -  total flux cleaned = 0.192139 Jy
! Component: 200  -  total flux cleaned = 0.206028 Jy
! Total flux subtracted in 200 components = 0.206028 Jy
! Clean residual min=-0.004075 max=0.007406 Jy/beam
! Clean residual mean=0.000000 rms=0.001050 Jy/beam
! Combined flux in latest and established models = 0.206028 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.206028 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=1.482 mas, bpa=-8.762 degrees
! Estimated noise=0.247754 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139404 Jy
! Component: 100  -  total flux cleaned = 0.0213614 Jy
! Component: 150  -  total flux cleaned = 0.0258077 Jy
! Component: 200  -  total flux cleaned = 0.0288401 Jy
! Total flux subtracted in 200 components = 0.0288401 Jy
! Clean residual min=-0.001912 max=0.001936 Jy/beam
! Clean residual mean=-0.000001 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.234869 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 34 components and 0.234869 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.106 mas, bmaj=2.551 mas, bpa=-8.496 degrees
! Estimated noise=0.310938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00324751 Jy
! Component: 100  -  total flux cleaned = 0.00505955 Jy
! Component: 150  -  total flux cleaned = 0.00619964 Jy
! Component: 200  -  total flux cleaned = 0.00690579 Jy
! Total flux subtracted in 200 components = 0.00690579 Jy
! Clean residual min=-0.001683 max=0.001734 Jy/beam
! Clean residual mean=0.000002 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.241774 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000175832 Jy
! Component: 100  -  total flux cleaned = 0.000284686 Jy
! Component: 150  -  total flux cleaned = 0.000398642 Jy
! Component: 200  -  total flux cleaned = 0.000483806 Jy
! Total flux subtracted in 200 components = 0.000483806 Jy
! Clean residual min=-0.001670 max=0.001689 Jy/beam
! Clean residual mean=0.000002 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.242258 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 65 components and 0.242258 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=1.482 mas, bpa=-8.762 degrees
! Estimated noise=0.247754 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000502033 Jy
! Component: 100  -  total flux cleaned = -0.000613737 Jy
! Component: 150  -  total flux cleaned = -0.000646831 Jy
! Component: 200  -  total flux cleaned = -0.000706584 Jy
! Total flux subtracted in 200 components = -0.000706584 Jy
! Clean residual min=-0.001553 max=0.001572 Jy/beam
! Clean residual mean=0.000001 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.241551 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 84 components and 0.241552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069772Jy  sigma=1.355704
! Fit after  self-cal, rms=0.069765Jy  sigma=1.355578
wmodel /J2253+3236_X_map.mod
! wmodel: Unable to open new model file: /J2253+3236_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2253+3236_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.013 x 1.482 at -8.762 degrees (North through East)
! Clean map  min=-0.0014203  max=0.1768 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2253+3236_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.1768 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000364427 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.61837 0.61837 1.23674 2.47348 4.94696 9.89392 19.7878 39.5757 79.1514
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.176 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  485.146 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2253+3236_X_dfm.log closed on Thu May 19 23:42:14 2016